Samsung galaxy tab 2 10.1 P5100 Problem - Galaxy Tab 2 General

Hiya its me again, soo ive just purchased a kinda "bricked" p5100 the tablet is running philz 6.19.6 galaxy tab 2 cm_p5100 theres is certinly no way that i can do anything via odin because tablet isnt recognized it says that the last time it connected it didnt work properly so now it wont connect ive tried everything that is on google or on xda forum but no luck so my last thing is since it has bootloop that i try to flash via recovery a new rom but i run in some problems with error status 6 or 7 because i couldnt find any rom compatible with that recovery version i really dont know what to do anything else can somebody help me? Thank you very much!

Also ive tried 30 roms on xda forum for my tablet none was successfull ive tried also updating recovery from 6.19.6 but it said i was sucessful but it didnt update. im so lost

Your emmc reached end of life. More information here http://andi34.github.io/faq (scroll down)

Related

[Q] HELP!!!! note 3 bootloop

Hello everyone,
i am fairly new to the world of rooting and recently encountered a problem while flashing a rom
i have the at&t samsung galaxy note 3 N-900A running 4.3 jellybean (2 year contract expired and i got and used the unlock code)
i rooted the phone using the kingo root app, because i could not update the phone (I recently moved out of the USA so i cant connect to an at&t server to update)
i installed safestrap recovery 3.71 and it was running fine
i found a tutorial from galaxy note 3 root for the knoxraid ro
(put youtube. c o m here) /watch?v=8HDHt4xSnQY
according to the tutorial i had to install the rom over the stock rom file
so i copied the stock rom to rom slot 1
this is where i messed up, i installed the knoxraid rom over the stock rom without wiping/data factory reset first. But it gets worse, i realized i forgot to wipe the data from safestrap so before the install was even halfway completed, i pulled the battery out.
now whenever i turn it on it will go straight to recovery mode
it wont even turn off. i have to pull the battery out.
i can get to download mode and recovery mode but thats it.
im not sure about the build number because it wont boot up
all i can tell you is it is a at&t note 3 running 4.3 jellybean
please help if you can
btw: my computer wont recognize the phone because it says the PHONE does not have the correct drivers installed
however odin still recognizes it with the blue box with 0:[COM6] if that helps
so yeah please help me the phone is fairly new and i dont want to waste $600
infinitephase said:
Hello everyone,
i am fairly new to the world of rooting and recently encountered a problem while flashing a rom
i have the at&t samsung galaxy note 3 N-900A running 4.3 jellybean (2 year contract expired and i got and used the unlock code)
i rooted the phone using the kingo root app, because i could not update the phone (I recently moved out of the USA so i cant connect to an at&t server to update)
i installed safestrap recovery 3.71 and it was running fine
i found a tutorial from galaxy note 3 root for the knoxraid ro
(put youtube. c o m here) /watch?v=8HDHt4xSnQY
according to the tutorial i had to install the rom over the stock rom file
so i copied the stock rom to rom slot 1
this is where i messed up, i installed the knoxraid rom over the stock rom without wiping/data factory reset first. But it gets worse, i realized i forgot to wipe the data from safestrap so before the install was even halfway completed, i pulled the battery out.
now whenever i turn it on it will go straight to recovery mode
it wont even turn off. i have to pull the battery out.
i can get to download mode and recovery mode but thats it.
im not sure about the build number because it wont boot up
all i can tell you is it is a at&t note 3 running 4.3 jellybean
please help if you can
btw: my computer wont recognize the phone because it says the PHONE does not have the correct drivers installed
however odin still recognizes it with the blue box with 0:[COM6] if that helps
so yeah please help me the phone is fairly new and i dont want to waste $600
Click to expand...
Click to collapse
Well, this is the wrong forum to begin with.
However, head over here, http://forum.xda-developers.com/showthread.php?t=2703006 , and read very, very carefully.
sirobelec said:
Well, this is the wrong forum to begin with.
However, head over here, http://forum.xda-developers.com/showthread.php?t=2703006 , and read very, very carefully.
Click to expand...
Click to collapse
sorry, next time ill post in the right forum
thanks for the link, however this appears to be for the N900AUCUCNC2 variant, which i believe is KitKat (sry if im wrong) i need files for 4.3 jellybean firmware. (i never updated)
thanks in advance

note 4 910g help

hi all i have a note 4 910g from australia. the past 2 notes i have had were 910g's and when i root it works fine but when i install a recovery half my screen does not work like the calibration is all off. i got a new one today but i am afraid it will happen again. 1 thing that has happen in the notes that didnt happen with the new one a software update. if anyone from australia has got one from jb hi fi, that is where i got it help me please. i miss root access. i find root works fine but when i install a recovery the calibration is stuffed in both the samsung fm and in the recovery, i have tried cmw, twrp and philz , also downloaded xnote to see if it was just the stock fm but it put my phone in a boot loop. i have used sony for the past year, so i might be missing something. the steps i took was first download the root for 910g go into odin then put to pda and flash second i did was first flash the recovery on my phone which was the first note 4 , second note 4 i flashed the recovery using odin. i then when it didnt work i did a format, didnt work. then i flashed the australian latest firmware and still nothing. i got a new note 4 today and i am scared to try and root and flash a recovery, in scare of what has happened with the last two notes. thanks any help is much appreciated if you are on facebook i can send you videos of the problem i uploaded it to a note 4 group .

[Q] Soft-bricked SM-T230NU (what next)....

Its been a few months since Ive bothered trying to figure out how to fix my Galaxy Tab 4, SM-T230NU, but Im finally getting around to fixing it. It sat in my closet for a few months simply because I did not have the time to fix it. It's soft bricked (loads the Samsung Galaxy Tab 4 bootscreen, but stays stuck on the single Samsung logo). Its not hard bricked as power turns on, but it is soft-bricked. Will running NE2 I found in the firmware section fix the soft-brick? I just downloaded odin 3.09, and right now NE2 is downloading through Mega.nz......any help would be appreciated....
jxcorex28 said:
Its been a few months since Ive bothered trying to figure out how to fix my Galaxy Tab 4, SM-T230NU, but Im finally getting around to fixing it. It sat in my closet for a few months simply because I did not have the time to fix it. It's soft bricked (loads the Samsung Galaxy Tab 4 bootscreen, but stays stuck on the single Samsung logo). Its not hard bricked as power turns on, but it is soft-bricked. Will running NE2 I found in the firmware section fix the soft-brick? I just downloaded odin 3.09, and right now NE2 is downloading through Mega.nz......any help would be appreciated....
Click to expand...
Click to collapse
Flash the right firmware for your device and see if it boots. If it doesn't boot within 20minutes after flashing, simply reboot into recovery and factory reset.
-DUHA
When I rooted the device, gaining root on the 230NU was abit of work, so I had to go through a lot of in and out holes just to root the sucker, and then a week or two later there are many different ROMs available for the 230NU...I'm shocked that someone finally found a workaround for the marvel processor in the 230NU because the 8 I believe has a snapdragon and/or euronoyx (however you spell it)
jxcorex28 said:
When I rooted the device, gaining root on the 230NU was abit of work, so I had to go through a lot of in and out holes just to root the sucker, and then a week or two later there are many different ROMs available for the 230NU...I'm shocked that someone finally found a workaround for the marvel processor in the 230NU because the 8 I believe has a snapdragon and/or euronoyx (however you spell it)
Click to expand...
Click to collapse
It works, im running 4.4.2 stock....Im about to look into some information about rooting.....When I got everything running smooth I got a system update message, so right now it's going through a system update......Do you have any good source of information for rooting the SM-T230NU ???
jxcorex28 said:
It works, im running 4.4.2 stock....Im about to look into some information about rooting.....When I got everything running smooth I got a system update message, so right now it's going through a system update......Do you have any good source of information for rooting the SM-T230NU ???
Click to expand...
Click to collapse
Here

[Q] Galaxy s4 bricked after OTA failed update

Hello XDA community
Iam a longtime lurker here what a great community with a wealth of information.
I have a a grasp of the basic rooting and flashing custom roms/kernels over the past few years on my old galaxy s3.
My partner had an OTA update for her gt9505 galaxy s4 today whicg seemed to hang while updating, unfortunately she pulled the battery mid update
The phone can enter download odin mode but i cant get it to open the recovery. I have flashed (using odin) a few different compatible roms they finish installing via odin but when the phone restarts it just turns off it will not go past the galaxy white and black screen. It will turn off again.
It has never been rooted, i spent many hours trying to get to the OS but it fails when restarting. I decided to flash CF-Auto root hoping to get access to recovery. Again it successfully installs cf auto root and restarts and then turns off.
It seems everything i flash never ever saves to memory.
What else can i try please? iam happy installing a custom rom but i cant get it working. iam afraid its bricked for good without expensive repairs.
thanks
lol i managed to get it working.
It was a combination of dead battery and multiple problem cables not charging the phone.

Need Some ideas Note 4 rom bootloop

i was just using my note 4 on a rooted stock rom but then it turn off when i open it again it got stuck in the samsung galaxy note 4 powered by android
things ive done
flash stock rom via odin same version and lowered version of rom
flash twrp via odin not working also cant get to recovery mode
flash cf auto root via odin not working also
flash a recovery.img not working also
every odin flash i did was a pass but it wont take me anywhere else besides galaxy note 4 logo
so in summary i cant get to recovery or os even after flashing everything im just stuck in this samsung galaxy note 4 logo i can only to download mode nothing else anyone else have a suggestion
any suggestion is awesome thanks in advance
Same problem
I have the Snapdragon Duos version using this rom https://forum.xda-developers.com/no...eo-8-1-0-unofficial-lineage-15-1-rom-t3760969 and it got this peculiar problem of sim death. Basically when you restarted the phone to revive your sim, you got bootlooped. Couldn't get to recovery. either:crying:
I tried the things you tried and it was the same. Stuck on boot animation. No recovery.
Have you found a solution now? Anyone has any idea?
Guys, don't you know that the eMMC problem is a plague of the 910F models? Maybe that's the issue.
Get to read more on the Snapdragon threads about it.

Categories

Resources