hi all i have a note 4 910g from australia. the past 2 notes i have had were 910g's and when i root it works fine but when i install a recovery half my screen does not work like the calibration is all off. i got a new one today but i am afraid it will happen again. 1 thing that has happen in the notes that didnt happen with the new one a software update. if anyone from australia has got one from jb hi fi, that is where i got it help me please. i miss root access. i find root works fine but when i install a recovery the calibration is stuffed in both the samsung fm and in the recovery, i have tried cmw, twrp and philz , also downloaded xnote to see if it was just the stock fm but it put my phone in a boot loop. i have used sony for the past year, so i might be missing something. the steps i took was first download the root for 910g go into odin then put to pda and flash second i did was first flash the recovery on my phone which was the first note 4 , second note 4 i flashed the recovery using odin. i then when it didnt work i did a format, didnt work. then i flashed the australian latest firmware and still nothing. i got a new note 4 today and i am scared to try and root and flash a recovery, in scare of what has happened with the last two notes. thanks any help is much appreciated if you are on facebook i can send you videos of the problem i uploaded it to a note 4 group .
Related
Hey guys. Ive had a note 3 before in the past and have used the Root DelaVega to root successfully. This was early in the year. I sold my old note 3 for an HTC One. Well today i traded my HTC One back for a note 3 as i missed the Note 3. As soon as i came home i attempted to use the Root DelaVega method to foot (just like i did before) and immediately it failed.
I have been stuck on a screen saying "firmware update encountered an issue - select recovery in Kies" so i tried Kies 3.2 however it says my device is not compatible. Come to find out after doing research (talking to the original owner i traded my HTC One for) the Note 3 i have is on the latest version of KitKat 4.4.2 that is not compatible with the Root DelaVega method or any root method - so i screwed that up. I can successfully boot in and out of download mode. Ive tried to flash N900XXUDNA6 4.4.2 in Odin several times, it begins then fails almost immediately and the bar on the phone itself (in download mode) begins then freezes shortly after beginning. Ive also tried to flash N900XXUDNC1 JellyBean thru odin and get the same results - almost immediately fail and the blue status bar on the phone freezes when it barley begins. What else can i do??? am i totally screwed? Ive been researching and trying to fix this for 6 straight hours now! My gf is about to kill me for being online so long Is there anything i can do at this point? Am i stuck.
Do you know what Region the phone was originally? I had a similar issue and I had to get the Hong Kong (in my case) version of a stock ROM and flash that to get things working again. Not all partitions are the same - you might need a PIT file to match your original region and then flash the ROM.
What info do you get in DL mode?
Journyman16 said:
Do you know what Region the phone was originally? I had a similar issue and I had to get the Hong Kong (in my case) version of a stock ROM and flash that to get things working again. Not all partitions are the same - you might need a PIT file to match your original region and then flash the ROM.
What info do you get in DL mode?
Click to expand...
Click to collapse
Yes the phone is for AT&T so it's US. When I go into DL mode Knox counter is still 0x0. Is there a certain firmware I need then to match with the AT&T model? Or a pit?
jthornton71707 said:
Yes the phone is for AT&T so it's US. When I go into DL mode Knox counter is still 0x0. Is there a certain firmware I need then to match with the AT&T model? Or a pit?
Click to expand...
Click to collapse
Go to Sammobile and see if you can find the version you had, sounds like an older JB if kingo app didn't trip Knox. Reflash that using ODIN.
I don't know if there was a problem with American bootloader, see if there's an AT&T Note 3 forum. Might find answers there...
jthornton71707 said:
Hey guys. Ive had a note 3 before in the past and have used the Root DelaVega to root successfully. This was early in the year. I sold my old note 3 for an HTC One. Well today i traded my HTC One back for a note 3 as i missed the Note 3. As soon as i came home i attempted to use the Root DelaVega method to foot (just like i did before) and immediately it failed.
I have been stuck on a screen saying "firmware update encountered an issue - select recovery in Kies" so i tried Kies 3.2 however it says my device is not compatible. Come to find out after doing research (talking to the original owner i traded my HTC One for) the Note 3 i have is on the latest version of KitKat 4.4.2 that is not compatible with the Root DelaVega method or any root method - so i screwed that up. I can successfully boot in and out of download mode. Ive tried to flash N900XXUDNA6 4.4.2 in Odin several times, it begins then fails almost immediately and the bar on the phone itself (in download mode) begins then freezes shortly after beginning. Ive also tried to flash N900XXUDNC1 JellyBean thru odin and get the same results - almost immediately fail and the blue status bar on the phone freezes when it barley begins. What else can i do??? am i totally screwed? Ive been researching and trying to fix this for 6 straight hours now! My gf is about to kill me for being online so long Is there anything i can do at this point? Am i stuck.
Click to expand...
Click to collapse
Hi mate,
if you are stuck, maybe you can try this.
http://forum.xda-developers.com/show....php?t=2701062
it's a way to unbrick your software.
and if the older owner of your N3 said it's on the latest firmware of kitkat.
maybe your problem is the firmware in the sammobile were before the firmware you have install on your device via OTA update.
Yours firmware came throw out via OTA update and with some reason you can't see any latest firmware USA N900A in sammobile.
try the method in the link and reply if you have been successful.
cumps
Ik Knox is 0×0,then u can try samsung service centre ?
Sent from my SM-N900 using XDA Premium 4 mobile app
Hello everyone,
i am fairly new to the world of rooting and recently encountered a problem while flashing a rom
i have the at&t samsung galaxy note 3 N-900A running 4.3 jellybean (2 year contract expired and i got and used the unlock code)
i rooted the phone using the kingo root app, because i could not update the phone (I recently moved out of the USA so i cant connect to an at&t server to update)
i installed safestrap recovery 3.71 and it was running fine
i found a tutorial from galaxy note 3 root for the knoxraid ro
(put youtube. c o m here) /watch?v=8HDHt4xSnQY
according to the tutorial i had to install the rom over the stock rom file
so i copied the stock rom to rom slot 1
this is where i messed up, i installed the knoxraid rom over the stock rom without wiping/data factory reset first. But it gets worse, i realized i forgot to wipe the data from safestrap so before the install was even halfway completed, i pulled the battery out.
now whenever i turn it on it will go straight to recovery mode
it wont even turn off. i have to pull the battery out.
i can get to download mode and recovery mode but thats it.
im not sure about the build number because it wont boot up
all i can tell you is it is a at&t note 3 running 4.3 jellybean
please help if you can
btw: my computer wont recognize the phone because it says the PHONE does not have the correct drivers installed
however odin still recognizes it with the blue box with 0:[COM6] if that helps
so yeah please help me the phone is fairly new and i dont want to waste $600
infinitephase said:
Hello everyone,
i am fairly new to the world of rooting and recently encountered a problem while flashing a rom
i have the at&t samsung galaxy note 3 N-900A running 4.3 jellybean (2 year contract expired and i got and used the unlock code)
i rooted the phone using the kingo root app, because i could not update the phone (I recently moved out of the USA so i cant connect to an at&t server to update)
i installed safestrap recovery 3.71 and it was running fine
i found a tutorial from galaxy note 3 root for the knoxraid ro
(put youtube. c o m here) /watch?v=8HDHt4xSnQY
according to the tutorial i had to install the rom over the stock rom file
so i copied the stock rom to rom slot 1
this is where i messed up, i installed the knoxraid rom over the stock rom without wiping/data factory reset first. But it gets worse, i realized i forgot to wipe the data from safestrap so before the install was even halfway completed, i pulled the battery out.
now whenever i turn it on it will go straight to recovery mode
it wont even turn off. i have to pull the battery out.
i can get to download mode and recovery mode but thats it.
im not sure about the build number because it wont boot up
all i can tell you is it is a at&t note 3 running 4.3 jellybean
please help if you can
btw: my computer wont recognize the phone because it says the PHONE does not have the correct drivers installed
however odin still recognizes it with the blue box with 0:[COM6] if that helps
so yeah please help me the phone is fairly new and i dont want to waste $600
Click to expand...
Click to collapse
Well, this is the wrong forum to begin with.
However, head over here, http://forum.xda-developers.com/showthread.php?t=2703006 , and read very, very carefully.
sirobelec said:
Well, this is the wrong forum to begin with.
However, head over here, http://forum.xda-developers.com/showthread.php?t=2703006 , and read very, very carefully.
Click to expand...
Click to collapse
sorry, next time ill post in the right forum
thanks for the link, however this appears to be for the N900AUCUCNC2 variant, which i believe is KitKat (sry if im wrong) i need files for 4.3 jellybean firmware. (i never updated)
thanks in advance
Dear tweakers of XDA,
I've got a problem with my note 3. After i'd seen the thread for the Note 4 styled S5 Based ROM. I decided i wanted to give Rooting and flashing custom roms a try ( Havn't done it since my S2).
All went well and dandy, i rooted with CF Autoroot knowing my knox counter would trip to 0x1. I've installed CWM Recovery, downloaded the rom and installed it through the CWM Recovery. After install i saw that my wifi didnt work and my 3G Data didnt work which was strange because the regular calling functioned ? Also i installed AEL's newest kernel (because the thread says it wasnt included i had to flash it myself )
After not being able to fix this i'd decided to download ODIN and the correct firmware for my phone, Tmobile Netherlands N9005 TNL version 4.4.2
I flashed it back using ODIN and to my surprise the phone was extremely slow. Reacting really late 5-10-15 seconds later to the sleep/wake button. The lockscreen would also hang for about 30 seconds and the IMEI is unknown. Whenever i open the Phone app it gets stuck. Network doesn't work at all ofcourse because of the IMEI. I do have a backup of my EFS and i'm not too scared of anything. I just really want my note back the way it was
Could you kind people help me ?
if you have a efs back up, so restore it with the original firmware
I used to face the same problem, but i was not as lucky as you - i had no efs back up, and i have to use sptbox - e.g. my original Imei has gone :3
btw, did you face any sensors issues?
There is a efs recovery script in note 3 Android dev thread. Gold luck!
http://forum.xda-developers.com/showthread.php?t=2507403
This
Hi everyone,
This is my first post and I hope that I am in the right section.
As per info in the thread title, I have a Malaysian Samsung Galaxy Note 3 updated to the last available firmware 4.4.2
I am trying to flash Lollipop with Odin (i followed all the instructions in the guide, literally step by step).
I have tried with the italian Lollipop update branded Vodafone, but Odin always failed and the phone was soft bricked.
I have reinstalled the original malaysian firmware 4.4.2 that i had prior this attempt. phone booted ok and worked perfectly fine.
Then i downloaded the lollipop firmware from poland, this thime odin completed the process and gives me a pass. but the phone goes in boot loop (samsung logo at booting never goes away). I have tried to reboot in recovery mode and wipe the cache. but still boot loop.
Would anyone be so kind to explain what i am doing wrong and how i could install lollipop on my malaysian galaxy note 3?
Any help would be much appreciated.
Luc81
Wipe all before flash lollipop.
Joku1981 said:
Wipe all before flash lollipop.
Click to expand...
Click to collapse
Thanks,
actually I have just managed to flash it correctly about 1 hour ago. i didn't need to wipe my data. Now it works properly.
Thanks anyway for your help!
hows your experience ?
just let us know what was the mistek, so others wont have to ask the same question again ...hehehe
all the best!
note 3 lolipop(Malaysia) N9005
Guys good news because this morning when I was checking my software update ... Thru Ota is about 860mb and thru keis 3 is about 1.3gb. Took me couple hours to download and about 1hour ++ to install. Booting up took some time and luckily everything is working fine for the time being.
Anyone updated and how's the battery draining issue.
i try update my note3 using kies3, it confirmed lollipop 5.0 available to update, but unfortunately my note3 repeatedly crash during upgrade and window on kies top up said "PC cant recognized my phone". Maybe cause of my knox warranty void 0x1 (trip). i hack on local C:\Users\YOUR NAME\AppData\Local\Temp and get copy of *.zip files (N9005DXUGBOD1_N9005OLBGBOD1_HOME.zip). It was lollipop firmware version for malaysia. Upgrade it using Odin and succesfull installed.
Lolipop
I was having the same issue while updating thru keis. So I downloaded it thru OTA. Battery sucks after lolipop. If you are facing any issue just send me a mail
i was just using my note 4 on a rooted stock rom but then it turn off when i open it again it got stuck in the samsung galaxy note 4 powered by android
things ive done
flash stock rom via odin same version and lowered version of rom
flash twrp via odin not working also cant get to recovery mode
flash cf auto root via odin not working also
flash a recovery.img not working also
every odin flash i did was a pass but it wont take me anywhere else besides galaxy note 4 logo
so in summary i cant get to recovery or os even after flashing everything im just stuck in this samsung galaxy note 4 logo i can only to download mode nothing else anyone else have a suggestion
any suggestion is awesome thanks in advance
Same problem
I have the Snapdragon Duos version using this rom https://forum.xda-developers.com/no...eo-8-1-0-unofficial-lineage-15-1-rom-t3760969 and it got this peculiar problem of sim death. Basically when you restarted the phone to revive your sim, you got bootlooped. Couldn't get to recovery. either:crying:
I tried the things you tried and it was the same. Stuck on boot animation. No recovery.
Have you found a solution now? Anyone has any idea?
Guys, don't you know that the eMMC problem is a plague of the 910F models? Maybe that's the issue.
Get to read more on the Snapdragon threads about it.