Related
how many of you guys are using screen protectors? im using one, but it keeps getting dirty every 2 weeks. im beginning to think if its even necessary to have one for my device.
It depends on what you mean by dirty. In a way you have answered your own question. If you didn't have a screen protector, your screen is potentially left open to abrasive scratches. My understanding is that once a screen is scratched, tough. It's much easier to replace a protector than a damaged screen.
I didn't realise how delicate screen protectors were when I applied the one that came with the MDA. I've just replaced my original thin protector with a Hightec one from durasec £7.95 from Ebay. They also do thinner ones for less. Like everything in life, you get what you pay for.
Bottom line is the standard motto. Prevention is better than cure.
I am using a Covertec one, and it is fine since a while (more then 2 month).
Boxwave
I'm very happy with the Boxwave clear protector.
I wouldnt go without my brando screen protector ... been using them since my P900 had no problems with dirt or scratches ..
Brando
I use Brando as well. It's the best.
I use 3M, is't 3M the best?
I'm using the brando ultra clear but the application was fudged up; for some reason there was already dust on the screen protector despite it still being seal :shock:. I peeled it off, start applying when I realized that it was leaving marks on the screen.
Washed it then reapplied and in the process, I managed to drop my cutter on it , blade first, and there's a small scratch on one corner.
Definitely going to have to have another go. With respect to clarity and responsiveness, I find it to be unresponsive if the application was poor but otherwise, suits me fine and nobody could tell it was applied except due to the fact that there's a scratch on it. Anyone got any tips? I washed with cool water and no detergents. Should I use any detergents?
what kinda protectors u guys use, i mean thin or hard. I had a belkin thin screen protector on my jam and it worked perfectly for more than a year, then i sodl the device and got the O2 XDA mini s, now i am looking for some decent screen protector.
what do u guys recommend, hard or thin?
This is probably heresy, but I have had my phone for 6 months and have never used a protector and there isn't one scratch. I travel about 80% a year for work to boot. But it usually travels in my pocket as opposed to a bag or something.
cool
i was waiting to hear that...6 months in your pocket and no scratch? thats pretty good..because i keep mine in my pocket all the time..if i ever throw it in a bag..i use the case it came with.
I just got a Martin Shields and love it. Took a little getting used to having to press a little harder, but it's great and I can't even tell it's on there.
by the way, how do I uninstall the old screen protector?
It has many scratchs over it and even more dust particles under it...
I'm using the BoxWave ClearTouch screen protector. I love it. I can barely tell it's on. I highly recommend it. It was kind of a pain to get on properly, but what screen protector isn't.
Do you use a screenprotector on your trinity? I do, one from Brando, but I don't like it and am thinking about removing it...
Is anyones screen already damaged?
Is it possible to put it perfectly at all ?! I mean I must be in a totaly sterile envoirement with gloves and special suit and God knows how and what skill I must have to put it right
My Trinity is one day old but I will surely remove it in a couple of days, can't look at it with this ugly bubbles beneath
The first thing I do when I get any new device is get a screen protector for it, and it goes on before I ever start using the device. I've gone through a lot of PDA's over time and one thing I can say is that you get better at putting on the protectors and you get used to the odd bubble or piece of dust underneath. It's far better than what happens to your screen without a screen protector over time.
The best way to put the protector on is to carefully peel just a bit of one edge and line it up at the top of the screen. Then use the included card to slide the rest down the screen, the paper backing will peel off as you do this and it helps to prevent bubbles and dust getting on the stick side of the film.
If you don't like bubbles, try a brand that is not adhesive. Most people don't like the type that slips under the case but I do. I've been using NuShield protectors for a couple of years on 4 different PDAs and they are great IMO. I don't use a case (store in pocket) and NuShields are very durable - easily lasting 6 mo.
I'm using a brando ultraclear for K-Jam in my p3600... it works perfect... I haven't any sort of bubbles because i put it the first day i got my new device.. so device under it was very clean and the result is PERFECT
shoey5 said:
...you get used to the odd bubble or piece of dust underneath. It's far better than what happens to your screen without a screen protector over time.
Click to expand...
Click to collapse
Completely agree!
I'm using Covertec Screenprotector(for S100), and it works like hell!
The screenprotector is about 1-1,5 mm thick, so it's pretty thick compared to many other brands, but the advantage is that it's almost impossible to get airbubbles, and the screenprotector is 110% clear! So you won't even see it's there!
Comes in a pack with two protectors, one with UV-filter, and one which is ultra-clear...
Can highly recomend them... No need for a "anti-bubble-wiper-thingy"
1.5mm thick?!?!?! That's thicker than a "anti-bubble-wiper-thingy". I have wetsuites that thick. You talking about a case or a screen protector?
LOL
No offense - just having fun. Some are actually quite thick in comparison.
Hehe! Well, ok; maybe it's a bit thinner... But it's about the thickness of a playing card, and just as stiff as one too...
And no, it's not a casing, or a wetsuit... Maybe a drysuit haha!
I use protector, but got 2 bubbles which I want to try to remove.
Can anyone tell me how to remove the protector without using anything thin and sharp?
Asbjørn
Tape. Take a 1-2 inch long piece of tape and press one end on a corner of the protector. Then pull
I can't get my screenprotector removed...not even with tape
Hate screen protectors. Don't use them. My nephew has a Jam which is years old and hasn't had a protector. NO screen scratches -- only a little dullness where the SIP keyboard is but that buffs out in seconds once a year using Displex. No scratches from keys even though it's subject to some abuse and the casing is scratched and dented. Thus I myself have no crap on my P3600's screen.
Im not a fan of cases or screen protectors, but I got 1 for my p3600. Its pretty good, I just wish it was about 2mm wider, since the left edge doesnt quite go till the very end of the screen which is annoying.
I got my screen protector from 'Javoedge.com' , it cost me about £8.50 but it is worth every penny.
It is cut to the exact size of the Trinity screen and fits really well. It is so thin that it slides beneath the White plastic case of my Trinity and the screen itself, so there are no edges of the screen protector to be seen.
I agree that you must take your time when installing it to try and get the edges straight, but when it's on it fits and looks great.
I opted for the super clear version and not the anti-glare version.
Great product!
Invisible shield from ShieldZone.com
I'm using an "Invisible Shield" from ShieldZone.com for my P3600. At the time I got mine, it didn't exist any pre-cut version for the P3600, so I ended up with a pre-cut TyTN shield, since they have the same screen size.
The first 2-3 days the result wasn't that good as I had some bubbles under the shield, but they disappeared after some days.
Watch the demo videos on ShieldZone.com, and I guess you will be as impressed as I'm with this shield.
-Bjørn
Hi people.
I am soon gonna be a happy owner of a Trinity and i will definately buy a screen protector for my device. Can you please give me your opinion on different brands you have tried?What brand would you recommend buying?
Thanks
I have a Brando one that they now market as a P3600 version.
It sticks to the screen with static so no glue or residue if you remove it. Also this means it is washable too. The static provides more than enough force to keep it on the screen. In fact it is stuck fast. Only by pulling a piece of tape stuck to it by both ends will remove it.
My only problem is more with screenprotectors in general. Since they add extra thickness to the screen they do affect the sensitivity of the touchscreen. So for a while you will write with the stylus and you wont be using enough force. You get used to it, but it would still be nicer to find a thinner membrane.
Mine is a Clear Touch Crystal from Boxwave. I've used Boxwave's products for years and found them to have very high durability and quality. The screen looks like it has nothing on it at all when the device is on. I find that it actually seems to improve touchscreen accuracy and feel.
The only problem I have had with screen protectors in general is that if they are cut too close to the borders of the screen, that is, if they fit too well, they seem to interfere with the screen's ability to detect taps. I think it is interfering with the digitizer. Every time I have installed a protector PERFECTLY leaving no gaps on any side, the screen stops responding until I remove the protector and reinstall it with the edges trimmed in about 1 mm on all sides. I don't think that you need to have all edges trimmed, but I do it for uniformity's sake.
Hope this helps someone who gets a protector and then thinks they broke their device by installing it like I did my first time.......ahhh to be young again.....
@olsenbjo
Does the Invisible Sheild cover the entire device, or just the screen?
Thanks!
How many of you are using a screen protector?
I just can't install this damn thing without making bubbles between the screen
and the screen protector.
Tried putting invisible shield today which covers the entire device. it came with
some spray to avoid dust but i'm still not happy with it. on the back it's ok, but
the front shield was so ugly and unclear that made me to remove it and now
i'm with no front protector at all.
The screen is more clear now but i'm afraid to scratch it.
Does anyone know how to install the screen protector in a way which it will be
totally unnoticeable?
I haven't ever used one, I find they make the screen less responsive. I do have a few scratches on my screen though but they are invisible when the screen is backlit...
GoldCoin said:
How many of you are using a screen protector?
I just can't install this damn thing without making bubbles between the screen
and the screen protector.
Tried putting invisible shield today which covers the entire device. it came with
some spray to avoid dust but i'm still not happy with it. on the back it's ok, but
the front shield was so ugly and unclear that made me to remove it and now
i'm with no front protector at all.
The screen is more clear now but i'm afraid to scratch it.
Does anyone know how to install the screen protector in a way which it will be
totally unnoticeable?
Click to expand...
Click to collapse
Your screen protector is a must as scratches can appear on your screen very easily without it.
As for the bubbles I've managed to get mine on with only a couple of bubbles around the speaker & 3G camera. Doesn't bother me to much any more
Try this thread as it has a number of recommendations on which is the best screen protector to use
Yes, the screen protector is a must!
Especially for a device with such a huge display. I have read here about cracked displays and I am sure that screen protectors give added resistance against cracking (besides their primary function against scratches).
It takes PATIENCE to apply one though. I wasted 2 before i managed to put one flawlessly (well almost)
Some of the protectors can be washed and re-applied.
Do you really think it has some impact on the way the screen respond ? Does the screen protector makes the bends more noticeable when you press on the center of the screen ?
I've used my Universal for over 3 years with no scrren protector, and there is a mark in the top right where the X icon is but no other issues. However the Universal is a clam shell design so the scrren is protected when it's in my pocket. I don't think I'd want to use the HD without one.
I couldn't fit the screen protector that came with the HD properly because it has to be done with microscopic precision. However I bought 6 protecoter for £3 on Ebay from Ecell and am very happy. They're much easier to fit because they're a fraction smaller, plus you can use a couple to practice with and still have spares left over.
I use the protector from day one and I can't imagine not using it. It's just too much of a risk, and by watching my used protectors, how they're covered with scratches, some of them quite big and quite deep. I would not want to have this permanently on my screen.
I have bought some additional protectors as well. I predict I will be changing protectors every 3 or 4 months.
I have no idea why everyone seems to have so much problems with applying them. It was very easy for me to apply both the stock protector and the Brando protector. Just clean the front screen as thoroughly as possible with a piece of cloth that does not leave those small fabric hairs. I used a cleaning cloth for glasses, and put a few drops of window cleaning fluid as well to remove eventual grease.
After that it was piece of cake. Started at the top and just rolled down the protector in one smooth move. Had 1 bubble, which I simply pushed to the edge of protector until it was gone.
I reccomend you do all of this in a dust-free environment. Bathroom is a good place, for example. Let the dust settle for like 20 minutes before going in. Avoid rooms which have carpets and such stuff.
I used mine for the first month+ without the screen protector and sustained no scratches. I have one on now simply because one day I was putting stuff away, saw the screen protector, put it to my HD and it went on perfectly without trying, so I decided to keep it on.
GoldCoin said:
How.....unnoticeable?
Click to expand...
Click to collapse
GoldCoin,
Have you tried buying on from a phone shop and asking them to install?
I installed mine as soon as I removed the "do not sit down with the HD in your pocket warning" Best way to ensure that the screen is clean. Took a couple of attemps to get it started but a little effort and I got it. Left with a small bubble round the ear piece and one top right, but that looks like a slight defect in the protector as the alignment looks almost perfect.
When installing, I peeled back a portion of the protector and aligned it best I could - incidentally, I placed the HD back in the foam that it came in to hold it firm. Without peeling any more off I try to gauge the alignment. If I think is good to go, I slowly peel the backing whilst rubbing my finger back and forth across the area just stuck down.
Here's another suggestion. PSP Screen Protector installation
Good Luck,
Yes, it's a must!
I use a screenprotector and it has lot's of scratches on it, which otherwise would be on the screen itself
Absolutely!
I Use clear-coat and are very satisfied (had it on my diamond as well and have it on my psp)
Once you get a mark on the display u will regret going without.
Thank you all for sharing your opinions. already ordered a Brando protector + 3 extra just in case i will mess things up again.
Following Rozenthal advice i think i'll apply it in the bathroom this time and not in my dusty workroom.
Bubbles are not problem. After installing screen protector just take you credit card. You can remove all bubbles with credit card.
Just adding my two pennies worth. I haven't ever used a screen protector on any of my previous phones. However Touch HD is a little bit special (as we know) so I invested. The one that came with was utter....well it was naff. I bought an invisible shield but some areas didn't dry and adhese correctly....so I opted for Exim...now this was awesome....a few attempts later and I have it installed with no bubbles at all using a credit card to apply.
(Top Tip: use selotape to remove any unwanted dirt from the screen before installing....the static tends to draw dust to it straight out of the packet....helped me anyway!)
GoldCoin said:
Thank you all for sharing your opinions. already ordered a Brando protector + 3 extra just in case i will mess things up again.
Following Rozenthal advice i think i'll apply it in the bathroom this time and not in my dusty workroom.
Click to expand...
Click to collapse
For what it's worth, it wouldn't hurt to use a can of dust remover or compressed air to spray the area before applying. Worked for me. Just a thought.
Does the normal screen protector that comes in the box makes the screen feels like bending when u press on it ? in the center specifically ? and makes you need to press harder when u tap ?
Invisible shield on mine and wouldn't be without a screen protector on any of my devices with my way of using them and pocketing them they tend to get scratched but loving the invisible shield. Should be installed at the factory imo
Jezwick said:
... I find they make the screen less responsive....
Click to expand...
Click to collapse
I've always used one, XDA mini, Kaiser and now the THD.
In all cases I've found the sensitivity is affected but to varying degrees.
In each case I've used tweaking tools to change the sensitivity back to acceptable levels.
But im only concerned to know. Does makes the screen feels like bending when u press on it ? I already know that all resistive screens do what i am talking about but does it increase when using a protector ?
Xeon said:
But im only concerned to know. Does makes the screen feels like bending when u press on it ? I already know that all resistive screens do what i am talking about but does it increase when using a protector ?
Click to expand...
Click to collapse
I haven't experienced this with the Exim protector I am using. In fact...it's as though there is nothing there....even when swiping!
DISCLAIMER: TRY AT YOUR OWN RISK!
Supplies: Fresh screen film, a thin, soft cotton cloth, and adjustable temp iron, spay bottle, and preferably a infrared thermometer.
Video: http://sendvid.com/ez03e7q7
If you're anything like myself, then you've discovered a long time ago, that although unsightly, screen protectors do exactly what they are supposed to do.
Enter Google Pixel: A beautiful screen that's just begging for protection so that it may remain as such for years to come... But there's a major problem. The screen is curved!
After failures from tempered glass and a few different brands of film protectors, I ordered the iCarez film protectors. The technique they recommend works really well. Nailed it on the first try, no bubbles or fuzzies!
After a few minutes, I noticed the right side peeling up. Pressed and rubbed and did everything I could would not stick. Tried again with a fresh film. Same thing, although this is the closest I've gotten to perfection so far.
Here's where the disclaimer comes in.
I grab the iron and set it to "synthetic". I let it heat up for a minute and check the temperature with my infrared thermometer. It's at about *220 f. I place the phone on the cloth and fold cloth over screen. Just one layer. Lightly spray the cloth with water so it's just a little damp. Then I grab the iron and with slow, firm movements, press the edge of the screen where the bubbles are, making sure to not leave it in one place for too long.
I pull back the towel and wipe away the moisture on the screen to reveal it's working! I have 90% of the halo gone!
The last bit just wouldn't go down. So I turned the iron up to about *270 f and repeated the same motion. Boom! Flat, no bubbles or halo.
If you try this, please be careful. I'm sure exposure to high temperatures is only OK for very short periods of time.
**I will reiterate that this should be done at your own risk.**
DON'T BE A DUMMY. DO NOT PLACE A HOT IRON DIRECTLY ON YOUR PHONE.
Good luck!
You could at least post a video or picture of the results.
Boo this man.
haitu said:
You could at least post a video or picture of the results.
Boo this man.
Click to expand...
Click to collapse
Noted... BRB
Had a heck of a time finding a hosting site, so I just had uncle Google create a video. I hope it's adequate.
http://sendvid.com/ez03e7q7
I never run a screen protector. Honestly by the time I was ready to switch phones I had one or two tiny scratches on the screen. My wife always runs a screen protector and while I am sure she is just using cheap screen protectors her screen always looks like shiz. Oh the reason I dont use screen protectors is because glass apparently keeps getting better and better so where is the need.
I also don't put things in my pocket with my phone and I tend tp put the glass side in towards my skin.
Just some perspective from a guy that doesn’t use screen protectors or cases. By all means your money is not mine and spend it how you will, this is just some insight.
I ordered the iCarez [HD Clear] Screen Protector for Google Pixel XL. I have had it on for 6 days and have had No issues at all. Very nice film screen protector. For years I have used, http://www.clarivue.com/browse-by-brand-screen-protector.html. Very solid ultra clear protector.
Thanks
haitu said:
You could at least post a video or picture of the results.
Boo this man.
Click to expand...
Click to collapse
twilk73 said:
I never run a screen protector. Honestly by the time I was ready to switch phones I had one or two tiny scratches on the screen. My wife always runs a screen protector and while I am sure she is just using cheap screen protectors her screen always looks like shiz. Oh the reason I dont use screen protectors is because glass apparently keeps getting better and better so where is the need.
I also don't put things in my pocket with my phone and I tend tp put the glass side in towards my skin.
Just some perspective from a guy that doesn’t use screen protectors or cases. By all means your money is not mine and spend it how you will, this is just some insight.
Click to expand...
Click to collapse
I see where you're coming from. I treated this phone like a sleeping baby on a land mine for the first few days waiting for a case and screen protector to come in the mail. Even then I still got a few small superficial scratches on the screen and a pretty noticeable one the softer back glass. A properly installed screen protector is barely noticeable and I change it out every few months when it gets scratched up. Small price to pay for the added protection.
It boils down to preference. At any rate, if you do like them, it's hard to install one on this phone. This is a way to get it to fit better. It's been a few days now and it's holding strong. I'm pleased.
I've noticed after my screen protectors get crappy and I haven't had them on my phone for a while, my screen never really gets scratched up. Therefore, I don't really use screen protectors anymore.
The only thing that ever scratched my screen was a titanium keychain accessory on my keyring. Regular keys never scratched my screen, but the titanium sure did. Luckily it was on a horrible temp phone I was using until my pixel arrived
I quit using protectors. Don't like the way they feel. And they have come a long way in scratch proof glass
Bought a tempered glass one about 2 weeks after getting the phone. And I got it about a day or 2 after its initial release.
Havent had any issues with it at all. Can't remember the brand, I just know it's a full protector, covers the entire front of the phone.
I bought the Supershieldz tempered glass 2 pack off Amazon as I have had success in the past with their screen protectors. It covers JUST the usable portion of the screen, not the entire front, and it works just fine. Zero bubbles and no "halo".
I've just got the orzly pro protector, covers the entire front as well with perfect cutouts
Easy to install, just hinge it and flap it on lol
Sent from my Pixel using Tapatalk
Hello all!
First time posting in a while, so forgive me if I'm a bit rusty. I just got my Samsung Galaxy Note 10+ yesterday, and my amFilm Ultra Glass Screen Protector today, so I thought I'd write up a little review. Sorry for no pics, but I was busy installing and trying to keep things dust-free
I've used Whitestone in the past but was disappointed with both my Note 8 and 9 installs, primarily because of the LOCA spiderwebbing on the edges. I figured I'd give another brand a shot, so I went searching here and found the amFilm Ultra Glass Screen Protector. A quick trip over to Amazon, and $40 later (for a full kit including *2* protectors) and here we are!
PACKAGING: The box is nice - wider and flatter than the WS product. It's clean and simple, but professional looking. Plus their website and install video are well done also. Inside the outer box are three smaller boxes. The largest contains the plastic frame, screen protectors, and wipes (I think). The medium size box contains the UV light and the MicroUSB cable. It appears to be identical to the WS product, but I don't know this for a fact, so take that for what it's worth. The smallest box contains the LOCA (2 tubes), extra absorption pads, plastic pin, tabs to place over the speaker, a bubble level, and a weight. Everything you need comes in this kit, including plenty of wet and dry wipes, microfiber cloths, and dust removal stickers. On the packaging is a QR code to go to the install video.
PRODUCT: Everything seems to be on the same quality scale as the WS product, with a few minor changes - 1) there is no LOCA applicator "bridge", you have to aim and dribble the solution by hand, 2) the pin is different - there's no more tilting the entire phone to move the liquid into position - the pin is angled and sets the glass down at an angle, and 3) the "fingerprint" weight (more on this later). Otherwise, if you've done the WS before, this isn't significantly different.
INSTALLATION: **REMINDER** REMOVE the factory plastic screen protector and clean your screen THOROUGHLY before proceeding! I ALMOST forgot, which would have been a disaster! I watched the video twice and didn't see any mention of this, so amFilm, here's a tip for you. Anyway, installation is straightforward -put the little feet on the bottom of the phone to bring it flush with the pins inside, make sure the screen is 100% clean, install the sticker over the speaker, apply the liquid (making sure to absorb any "splatter" before proceeding!), peel the protective film off the glass, place it, and pull the pin. Once the liquid starts to spread, put the weight where the fingerprint sensor is and let it settle and "ooze" for 3-ish minutes. (NOTE - it's hard to locate the fingerprint scanner, so you might want to mark the frame in advance with a Sharpie (another tip for amFilm - marking that plastic with some kind of raised bumps or hash marks might be a good idea, or maybe a film for on top of the glass that marks where to place it - just a thought). After that, it's bake-time under the UV light, then you're done.
RESULTS: I'm very impressed so far. The glass appears to be nice and clear, and I can't even see the little "spots" in the corners others mentioned. I lucked out this time and no dust specs at all. No bubbles, etc. the fingerprint scanner appears to be working fine, although I haven't re-registered anything. It DOES require a little extra "umph" to scan, but that's not a big deal. Part of that could be me getting used to an in-screen scanner. There was minimal over-oozing, and the pre-installed pads absorbed everything fine. Barely needed a wipedown afterward.
FITMENT: There appears to be no flaws in placement using the guide, or in the fitment of the glass. It sits flat, and lines up exactly where it should. The cutout for the front-facing camera is exactly where it should be, and it's not overly-exaggerated in size. The edges leave plenty of room for putting the phone in a case (I've tried 4 so far, all fit without touching the glass edge, so there's no worry about case push on the glue). The bottom edge is just a tad bit short, maybe a 1/16", but that could be allowing for larger cases (I don't use the big bulky ones, so IDK).
OVERALL ASSESSMENT: 4.5/5 Stars - Great product, especially for the price. I'll keep you posted on long-term wear & quality, but for now, I'd say it's a great deal versus the competition.
Great review. I just installed mine yesterday and I've had exactly the same great experience with the product. It really does work well with the fp scanner. I had a terrible time with the S10 plus fp scanner and the Whitestone. Great price as well. I'll buy again for sure.
Mine note come with preinstalled glass protector
fazi78 said:
Mine note come with preinstalled glass protector
Click to expand...
Click to collapse
So did everyone's. There's three or four threads about it already. And that's why the OP said to make sure to removed the factory installed screen protector.
Will this work with the samsung clearview cover ?
and can this protector be easily removed?
thanks
I just picked up a set of the amfilm install went flawless a lot easier than the whitestone I had on my S8 fingerprint worked right of the bat with what I had already registered I think it even sensed it better than the stock protector that came with the phone, well spent $40 bucks on amazon
Forgot to mention it fits perfect with my otterbox case
neils31 said:
Will this work with the samsung clearview cover ?
and can this protector be easily removed?
thanks
Click to expand...
Click to collapse
Not sure about the Clearview cover, I haven't ordered it yet.
As for removal, it uses LOCA glue to adhere the screen protector to the phone, so it's not the easiest thing to remove, but will come off with a little effort. You will want to have lots of alcohol wipes handy to clean the screen afterwards. Maybe a few Band-Aids, too
AMfilm doesn't seem to gather dust at the edges like it did with the Whitestone install on my Galaxy Note 9. That's a blessing! I was always cleaning clingy dust away on a daily basis. The edges on this install are clean!
RaymondPJR said:
AMfilm doesn't seem to gather dust at the edges like it did with the Whitestone install on my Galaxy Note 9. That's a blessing! I was always cleaning clingy dust away on a daily basis. The edges on this install are clean!
Click to expand...
Click to collapse
Hey Ray, do you know why? is it because of different density loca glue? I really want to switch to glass protector but hesitant because of dust built up around the edges.
Sent from my SM-N975W using Tapatalk
neils31 said:
Will this work with the samsung clearview cover ?
and can this protector be easily removed?
thanks
Click to expand...
Click to collapse
yep. works with every case i got so far. Might have issue with the ones with a front plastic piece though like on some heavy duty cases.
not sure about removal, but ive not had issue with any loca based one so far in the years ive used them.
lexi250 said:
Hey Ray, do you know why? is it because of different density loca glue? I really want to switch to glass protector but hesitant because of dust built up around the edges.
Click to expand...
Click to collapse
It must be a difference in the glue, I don't know what else accounts for it. I had really fuzzy edges all the time with WS.
How hard is it if you want to remove the screen protector pls?
I'll add my review...
I applied this to my S20+ yesterday. The steps were clear on paper, but the video was more helpful still.
Everything went fine with the exception that when I opened the adhesive tube it sprayed out a bit even before the top cap was opened, and I suspect this is due to me living at a high altitude. As a result my glue didn't fully spread to the whole screen, but close, and there were many small bubbles in the center of the screen. Next time I might try opening and closing the top first to equilibrate pressure.
That said, this is a promising product. It has a smooth and even finish, remains low profile so my case fits which still wraps the lateral edges, and the fingerprint part works a bit better than with the cheap plastic screen protector that samsung supplied (which also scratched easily).
I've never used screen protectors on prior phones, but this product is nice enough that I'll use it on future phones as well.
Additionally, the customer service was outstanding and they immediately sent me a replacement protector and more adhesive to try again.
Thumbs up so far, I'm confident my next application will be successful.
For those who installed this last year, how has it held up?
Jammol said:
For those who installed this last year, how has it held up?
Click to expand...
Click to collapse
Not good I'm guessing, based on the lack of replies. Wish someone woulda replied, oh well...
Sent from my SM-N950U using Tapatalk
Sorry, haven't been on XDA much. I've had my amfilm since Dec, 2019 and it's still like new. Oleophobic coating has not wear off.