So the WiFi won’t turn on I think the file has been deleted, I got into the settings and think I’ve completely screwed it up now, android now longer boots only the Sygic navigation comes on which won’t work as I cannot connect to the internet
Processor quadcore T3
Android version 6.0.1
Mcu version T5.3.19-36-40-E53201-17069
System version V8.2.3_20170809.190721_MLT1-DVD
Any suggestions will be greatly appreciated
Related
Thought i'd post my experience after a few days of pain in order that it might help someone else. XDA forum was complex in info but couldn't have been more valuable. I'll reference helpful posts below.
Car:Kia Sorento 2010
Head Unit: Pumpkin Android CN10
Android version: 6.01
Processor: quadcore-R16
Model / SKU: CN10-02201b-02A
Model is no longer available on amazon.
After a few weeks of use all the apps stopped launching and just returned to the home screen. Radio (UK) was dropping out every 30 seconds. The time never stayed set and changing it seems to have a bug that affects the system. Thats as much as I got from pumpkin forums. The weird thing was that there was no MCU info on the about screen.
So contacted Pumpkin who provided firmware updates. I would have thought it possible for manufacturers to track products, hardware and firmwares in a version control system but they insist on email 1-1 with firmware upgrades as solutions- but that's another story.
First round of firmware seemed to have bricked it - it was stuck in a boot loop or not booting at all. 3-4 firmware updates via some frosty email exchanges and its still stuck on boot with android logo.
Thats taken 7 days. Ouch
Then managed to find this thread https://forum.xda-developers.com/android-auto/android-head-units/allwinner-r16-astard7-android-6-0-1-t3523906
Since it mentioned the 'Allwinner quad core R16' i assumed it was relevant to this unit due to the chip info above. Since the unit was going back for a refund i didn't worry too much about screwing it up further.
So i took the rar file link from here:
KED1 (MEDEKE?) firmware (thanks):
V7.3.1_20170720.152039_KED1
"V7.3.2_20170826.102252_KED1.rar"
unpacked it on to sdcard:
81cb828c-9b57-11e6-ad2a-df6786178d62
827ba428-9b57-11e6-8dfb-37398ea70e52.0
827ba428-9b57-11e6-8dfb-37398ea70e52.1
827ba428-9b57-11e6-8dfb-37398ea70e52.2
Instead of doing what pumpkin said installing one file at a time on sdcard i put them all on root of card altogether and ran the upgrade. To my surprise everything installed OK. Rebooted and its working.
I'm pretty sure Pumpkin have no idea what they are doing with firmware as their forum seems littered with apologies for wrong firmware. Maybe they do . Luckily i have flashed a few roms and persevered with some success. The interface is different from factory settings but I now have a fully functioning radio , bluetooth, and installable sat nav app (map.me).
Some questions lingering in my mind.
1. Is this a eonon base unit?
2. Is there any core factory reset available?
3. Should i try and update the MCU to a newer version as listed in the post above?
4. How can I make a back up of my working settings?
5. Can i get any other GUI updates?
Hope this helps someone else with a CN10 R16 unit
Thanks for all the hardwork mods and devs do thru this forum too.
Hi guys please advice me what I should do.. my brother have Nissan maxima 2016 in the car he has android car unit, we do not know if this is the original head unit, but the system is old and very very slow, we tried to reset factory default but the system still stuck and slow, the only options for me are trying to upgrade for 3Party Android system or original rooted system, I am trying to find a system with the details I took from the system info but still can't find anything regarding that if someone can help me with that ill be very very thankful for that
https://ibb.co/vBknbWc
https://ibb.co/16427Qz
Good morning all ,
my radio is working fine, but I can no longer access the internet
she tells me that I am well connected to my smartphone's wifi, but that I do not have internet access!
My system is Quadcore R16
Android version 6.0.1
MCU: 5.3.19-23-B02-E43101-170210
System version: V7.3.1_20170327.134432_PH1radio
Can I do a RESET FACTORY?
will the radio still work if I do a REST FACTORY?
there is an update for my radio please ??
thank you for helping me please? Thank you
This is going to sound crazy but....
That has happened to me twice and both times I found that the head unit's date and time were wrong. Go to date/time in settings and make sure it is correct.
hello Bob_Sanders,
I was tested to see but no that does not change anything, my radio is on the right date and at the right time
thank you for your help !
Hi guys.
I have a Allwinner T3L with windows 10 (fake?). Its for my Ford Fiesta 2012 without sync and a rz-60 canbus.
Long story short. I got wrong canbus for it so nothing works, and after instructions from seller i installed diffrent types of Car supports in Extra settings.
Now im left here with a unit that is SUPER slow and dont save or work properly after trying to add diffrent car settings using units carchoose setting(mui) these files start with com.sw.carchoose_xxx_xxxx.rar or .apk
I tryed to restore factory settings , hard restart, unplug the device and everything that i can think off.
The seller wont send new firmware or old one.
So my question is what firmwire and mui should i use? What fits this unit.
Follow link for pictures: https://1drv.ms/f/s!AtzVybMr5ynghXWzy6xk8Apm2-Io
I read somewhere that there was a good tested firmware for t3l p1 advanced switch but i dont know if it works with my or where to find it
If I cant find any help here i don't know where to turn and will have to put it on the shelf or throw it away
So please help me out here
Thank you for your time reading
Ps: im sorry for my bad english
Hi guys. OMG I wanna cry .
So my Allwinner T3L P1 Android 11-8035 boots up no logos or display.
Side button lights work and the backlight on screen is dark and dim.
I flashed a System update update was a success, it rebooted and did the whole setup... Got a pop up message to reboot for the system settings to take affect.
And BOOM F***ed just like that.
It's definitely working I think the update messed up the resolution or something.
My Question is how can I reflash the Original System update on this unit now.
Please guys really need some help over here. Any ideas or means I can try would be gratefully appreciated.
Thank Gents
Hello, I hope you can help me,
My unit has always had auto touches, it clicks, mutes, exits apps and enters others by itself, it's very annoying.
I did a hard reset, but although it became more fluid, the wifi was damaged and does not turn on.
It is a K2001n, with android 10.1 fake, I would like to change the firmware and have a stable and more efficient one than this.
Can someone give me some recommendation?
Compare with this
Allwinner t3-k2001-nwd
Hi, I am the proud owner of an allwinner Radio. Does anyone know the password for system update? "0000" and "1234" won`t do ... Is there any chance to root it? I hope that is useful: Android 7.1.1 / SDK 25 (Nougat) MCU VER...
forum.xda-developers.com