So the WiFi won’t turn on I think the file has been deleted, I got into the settings and think I’ve completely screwed it up now, android now longer boots only the Sygic navigation comes on which won’t work as I cannot connect to the internet
Processor quadcore T3
Android version 6.0.1
Mcu version T5.3.19-36-40-E53201-17069
System version V8.2.3_20170809.190721_MLT1-DVD
Any suggestions will be greatly appreciated
Hi guys.
I have a Allwinner T3L with windows 10 (fake?). Its for my Ford Fiesta 2012 without sync and a rz-60 canbus.
Long story short. I got wrong canbus for it so nothing works, and after instructions from seller i installed diffrent types of Car supports in Extra settings.
Now im left here with a unit that is SUPER slow and dont save or work properly after trying to add diffrent car settings using units carchoose setting(mui) these files start with com.sw.carchoose_xxx_xxxx.rar or .apk
I tryed to restore factory settings , hard restart, unplug the device and everything that i can think off.
The seller wont send new firmware or old one.
So my question is what firmwire and mui should i use? What fits this unit.
Follow link for pictures: https://1drv.ms/f/s!AtzVybMr5ynghXWzy6xk8Apm2-Io
I read somewhere that there was a good tested firmware for t3l p1 advanced switch but i dont know if it works with my or where to find it
If I cant find any help here i don't know where to turn and will have to put it on the shelf or throw it away
So please help me out here
Thank you for your time reading
Ps: im sorry for my bad english
Hi guys. OMG I wanna cry .
So my Allwinner T3L P1 Android 11-8035 boots up no logos or display.
Side button lights work and the backlight on screen is dark and dim.
I flashed a System update update was a success, it rebooted and did the whole setup... Got a pop up message to reboot for the system settings to take affect.
And BOOM F***ed just like that.
It's definitely working I think the update messed up the resolution or something.
My Question is how can I reflash the Original System update on this unit now.
Please guys really need some help over here. Any ideas or means I can try would be gratefully appreciated.
Thank Gents
Hello
Somebody can tell me if there are any Updates for my Head Unit?
Thanks in Advance
Model: uis8581a2h10_Automotive
Manufacturer: sprd
Build: QP1A.190711.020 release-keys
Daniel210191 said:
Hello
Somebody can tell me if there are any Updates for my Head Unit?
Thanks in Advance
Model: uis8581a2h10_Automotive
Manufacturer: sprd
Build: QP1A.190711.020 release-keys
Click to expand...
Click to collapse
Hi I have the same unit. Not sure about updates, but wondering if you might be able to help. When I wake the unit from hibernation (i.e. a warm boot rather than a full boot), Zlink looks like it's playing music but there's no sound. I have to reboot the system to get the sound working again. Does/did yours do this?
Cheers!
Same issue here Daniel. Used to work fine out of the box for a few months, but now I have exactly the same issue with warm boot and need to reboo to get the sound back. Really annoying. Tried disabling zLink, factory data reset, etc. Maybe a fresh installation could work, but don't know where to get the firmware.
Any idea how to root this unit? All i want to do is update the boot up logo. It requires root access.
BMW_OS_8581_1920_720_1.86.zip
drive.google.com
This worked for me as an update, but I have a BMW. Hope this helps!
Just unzip the HUTUpdate to a blank USB
Zhiki said:
Any idea how to root this unit? All i want to do is update the boot up logo. It requires root access.
Click to expand...
Click to collapse
Use 3368 as a password in the factory settings should give you access to the Boot Image selection. That being said, the last unit I bought last December didn't have the option available
simonb123 said:
BMW_OS_8581_1920_720_1.86.zip
drive.google.com
This worked for me as an update, but I have a BMW. Hope this helps!
Just unzip the HUTUpdate to a blank USB
Click to expand...
Click to collapse
I see that is for a BMW. Would this still work on another type of vehicle with the same head unit?
Daniel210191 said:
Hello
Somebody can tell me if there are any Updates for my Head Unit?
Thanks in Advance
Model: uis8581a2h10_Automotive
Manufacturer: sprd
Build: QP1A.190711.020 release-keys
Click to expand...
Click to collapse
Did you ever get this to work? I am in the same boat.
tweak0000 said:
Did you ever get this to work? I am in the same boat.
Click to expand...
Click to collapse
No. Never found any Updates :/
and with the Update from simonb123 i am afraid to brick my Unit.. Dont know if i should try it or not
SPRD Uis8581a 2h10 Automotive
My device in the car shows android 12 but it is 10 ( app: fake device test)
I have an app for my house alarm and it sends me push notifications on my smartphone(s)
But it seems like the head unit does not get the push notifications.
” Also not from any other app. "
Is this blocked ?
How do I unlock this ?
( Sorry if I've post this in the wrong place. I'm not used to this)
I have this unit also from Dec 22 with about 50% of the time of no sound out of sleep. Even tried cold boot but it did mess up 1 time out of around 20 so not totally connected to sleep mode. I have made numerous tests with settings to try and get this resolved to no avail. Some of the times I can go into original car app and click and audio will come back on everything and perfect till cut off again. What I have done is put a switch in the ACC line to turn off and on but is a pain. The unit boots out of sleep in a different sequence every time. Even restarting the unit with power on which cold boots does not work and only disconnecting the ACC restores audio. Something locks up here and can't figure out what it is. Sounds more like a hardware issue than software as it resets when power off. Any ideas or fixes?
Hello, my father got a new headunit for his car, by looking at the settings I can see that it list this:
BOARD: ZQ_MTK_8007
MCU: MF1_mtk_C71_whe01a-aAaAaA_473X-B6_20210528
APP: MTK1B_C71_HA2_U800-10-EN_2021-04-22-1645
I'm trying to connect the phone with the bluetooth but I cannot find it, and the radio can't find my phone.
Anyone got some suggestion on how to proceed? Factory reset? Update firmware? I'm new to this stuff so I'm not sure what to do.
It seems like the bluetooth started working again, but still not sure if the firmware and software are safe to use
Hello, I hope you can help me,
My unit has always had auto touches, it clicks, mutes, exits apps and enters others by itself, it's very annoying.
I did a hard reset, but although it became more fluid, the wifi was damaged and does not turn on.
It is a K2001n, with android 10.1 fake, I would like to change the firmware and have a stable and more efficient one than this.
Can someone give me some recommendation?
Compare with this
Allwinner t3-k2001-nwd
Hi, I am the proud owner of an allwinner Radio. Does anyone know the password for system update? "0000" and "1234" won`t do ... Is there any chance to root it? I hope that is useful: Android 7.1.1 / SDK 25 (Nougat) MCU VER...
forum.xda-developers.com