Hi, my sister somehow forgot the graphical key, so phone is now locked. of course it is not a stolen phone , i do keep all the documents proving that it was bought.
So, all the articles point me to use TWRP recovery or similar, but to flash the twrp onto phone i first need to enable USB debugging and unlock bootloader but since phone is locked i can't get to developer setting ....
So, any solution to this? Any help greatly appreciated!
p.s. tried flashing TwRP and aroma zips from microsd flash with no success ( permission error = blocked bootloader?)
u need to unlock bootloader first and if data recovery is avoidable the simply reset device via booting into recovery via power + volume down button
u can simply unlock bootloader via asus official unlock tool without using pc,just a apk to install and use
love4chat said:
u need to unlock bootloader first and if data recovery is avoidable the simply reset device via booting into recovery via power + volume down button
u can simply unlock bootloader via asus official unlock tool without using pc,just a apk to install and use
Click to expand...
Click to collapse
Thanks for answer!
1) Reset device (wipe data in recovery menu) does nothing. when i load phone it asks me to enter graphic key to unlock device ((
2) How can i install this apk tool if i can't get past unlock stage? i tried to install it from recovery menu using sd card but it just won't install apk files in recovery mode,or it there something i don't know?
Please help
service center is last solution
pkm37 said:
service center is last solution
Click to expand...
Click to collapse
but some people say it is possible to just do wipe data operation to unlock graphical key. I don't understand why it doesn't work in my case..
Since Asus stock rom is encrypted.. .there could be hardly any way to recovery data without twrp or only using phone system.
pkm37 said:
Since Asus stock rom is encrypted.. .there could be hardly any way to recovery data without twrp or only using phone system.
Click to expand...
Click to collapse
But there is no need to save any data. Just need to remove pattern lock...
I seen youtube videos of how people just do wipe data reset in stock recovery and after reboot pattern lock is gone. Not in my case! why is that?
eugled said:
But there is no need to save any data. Just need to remove pattern lock...
I seen youtube videos of how people just do wipe data reset in stock recovery and after reboot pattern lock is gone. Not in my case! why is that?
Click to expand...
Click to collapse
are those youtube videos for Asus Zenfone Max Pro M2?
eugled said:
But there is no need to save any data. Just need to remove pattern lock...
I seen youtube videos of how people just do wipe data reset in stock recovery and after reboot pattern lock is gone. Not in my case! why is that?
Click to expand...
Click to collapse
maybe he/she didn't set up Google account, so no frp lock
Related
I had Revolution HD rom or something like that don't remember it't long time it worked. One morning I woke up and my phone didn't respone. Yesterday everything worked..When i tried to boot current rom it stuck on HTC screen..Okay so I decided to flash new rom because recovery still work but I probably lost my root because it can't delete previous rom..Today after long time I decide to ask you what to do. When I tried update new version of rom today it looked like everything it's fine but is stuck on HTC logo or restarts over and over again..
Sorry for bad eng..
DO you want help?I can help u if u only want it
Go into the recovery, wipe/format everything and flash a new ROM. Wipe is needed!
Sleekykenny: Of course i want
I wiped everything but it writes error when I wipe system.
I also flashed new rom and and got message saying successful, but when i reboot my dhd it just stay vendors screen which is 3mobile. But if i remove the battery i can get hboot menu. i also can get into clockworld recoveryand flash rom and wipe data etc. can anyone help or is my phone bricked.
Same problem
Guys I'm not an expert in this, but when you flash a new ROM it takes time to load. Maybe you just didn't wait enough.
markslo112 said:
Guys I'm not an expert in this, but when you flash a new ROM it takes time to load. Maybe you just didn't wait enough.
Click to expand...
Click to collapse
You're right. When intalling a new ROM, the first boot is longer because the new one is building a new Dalvik cache and so on... depending of the release.
Be patient a bit more, then report ...
http://www.multiupload.com/AURLLESU5V
1. Download this file
2. Do not unzip this file
3. Store it on SDCARD
4. Power off your device
5. Keep press Vol-Down
6. Do not releas the vol down an press power on
7. Follow the instruction on the screen
8. Enjoy and be patient for 5 minutes
;-)
Sent from my HTC Desire HD A9191 using XDA App
After 1 hour waiting I decided to put battery out because it have no point
rostuli said:
.....When I tried update new version of rom today it looked like everything it's fine but is stuck on HTC logo or restarts over and over again..
Sorry for bad eng..
Click to expand...
Click to collapse
markslo112 said:
Go into the recovery, wipe/format everything and flash a new ROM. Wipe is needed!
Click to expand...
Click to collapse
jabs40 said:
I also flashed new rom and and got message saying successful, but when i reboot my dhd it just stay vendors screen which is 3mobile. But if i remove the battery i can get hboot menu. i also can get into clockworld recoveryand flash rom and wipe data etc. can anyone help or is my phone bricked.
Click to expand...
Click to collapse
rostuli said:
Same problem
Click to expand...
Click to collapse
if you can get into your phone into hboot/recovery/fastboot then your phone is not a brick!
the problems with white htc screen is called a bootloop. like the user above suggested use a full wipe. easiest way is connect phone to PC and go into fastboot from your options when in the bootloader
type in fastboot erase system -w this will erase all system and userdata
then disconnect phone from PC when that is complete and navigate to your recovery option. select the recovery option and then mount back to USB cable and select USB toggle option so you can data transfer to SD card.
put new rom you wish to use or redownload one you wanted. then try again
It's actually a splash loop, a boot loop is the boot animation. But you get the idea
Sent from my HTC Desire HD using xda premium
the only option i get when i get into fastboot from the phone is bootloader,reboot,reboot bootloader and power down. if i chose any of the above then they all go back Hboot menu. cannot get into menu to type in fastboot erase sytem -w. can u advise me on where is the menu?. or i'm i doing something wrong..
thanks.
rostuli said:
After 1 hour waiting I decided to put battery out because it have no point
Click to expand...
Click to collapse
I don't understand where u was waiting.
Can you describe what was happening?
Are you able to access the bootloader??
1. Pull out battery
2. Put in battery
3. Hold power + Volume Down buttons until inside bootloader UI
4. Use volume keys to navigate to the "Recovery" option then press the power key.
5. Once recovery has booted, use volume keys to navigate to the "Factory reset & wipe data" option, then press power key.
6. Reboot.
Results?
Had the same problem in the past.
I downloaded an RUU and managed to get my phone to boot normally.
Take a look on this:
http://forum.xda-developers.com/showthread.php?t=982783
Download RUU is a good idea I tried it, didn't work..In that post he said some asian worked but I can't get one anywhere.
I used the Asia_WWE_1.32.707
Click to expand...
Click to collapse
like the user above suggested use a full wipe. easiest way is connect phone to PC and go into fastboot from your options when in the bootloader
type in fastboot erase system -w this will erase all system and userdata
Click to expand...
Click to collapse
Got part with fastboot but where am I supposed to write -w? I'm not that good in this that is why I ask here for help. But thanx anyway. And I tried wipe everything using recovery and when I wipe system writes error all the time.
I also tried all the above method but to no avail. Then a friend of mine bought the dhd so i made a goldcard from his phone loaded a pd98img.zip and flashed.. my dhd is back in action... i think this is your only solution, find somebody with the same phone. If u cant let me no i'll send you a gold card.
If it could help me than upload it somewhere And tell me how to use it. I heard about it but not sure.
You can remove your sd card then you will be able to choose the recovery option instead of it constantly going to hboot. The hboot looks for a file and asks you to instal or not install and then tells you to power of. Remove you sd card and you wont get this option so you can go into recovery and reflash a rom (you can re insert your sd card once in recovery and chose the mount option)
Hi everyone,
Sorry if this has been answered before but I've done some serious searching and can't find anything. I've found my old S5 to which I've forgotten the lockscreen pin. I would normally reset it using my Google account but I no longer have a sim that fits nor can I set up a new WiFi connection without access to the settings.
The device is not rooted nor do I think ISB debugging is enabled.
Thanks in advance!
Boot to recovery and factory reset
Volume up & home & power from a powered off state
*Detection* said:
Boot to recovery and factory reset
Volume up & home & power from a powered off state
Click to expand...
Click to collapse
Thanks, I should have made a note that I'm hoping not to have to reset it. I'd much rather be able to access it to see if I have left anything important on there.
If you flashed TWRP you might be able to wipe the security via recovery - but the security is there to prevent exactly what you are trying to do, so it won't be a couple of buttons to press
iirc, you have to adb in from recovery or something, but never done it myself
Flash TWRP with ODIN and have a google on removing lock screen security from TWRP
Or buy a SIM for £1 and top it up £5 (Or whatever your countries £ is
EDIT - Could give this a try
http://techbeasts.com/2014/03/07/by...id-device-without-any-data-loss-how-to-guide/
Make a backup in TWRP first (Could always restore the data side of the backup with TiBu after resetting which would ignore the lock I imagine)
Hi
Yesterday I got my axon 7 and it worked perfect.
Now I was wanted to change the language
So I downloaded as file that in my language
And I tried to install him .
And it worked by the adb software when the axon connected to the computer
So I went to the application in my phone and changed it to my language after USB debugging and developer option is worked
Then the phone was changed to my language and crashed
Now the axon just show the start logo and stuck in restart loop. so I tried to do few thing through your forum , but nothing helped ..
I also cleared the cache through recovery mode but it also didn't help
Its like the axon can't upload the operating system
Thanks a lot for who will help me here.
Also if it possible to send money through PayPal
And if it's legal I will send 30$ to the first that will help me solve this problem
Can you share the link to the file you downloaded ?
Is it compatible with the version of your phone ?
If you can enter in recovery it's enough to save it.
billy_boolean said:
Can you share the link to the file you downloaded ?
Is it compatible with the version of your phone ?
If you can enter in recovery it's enough to save it.
Click to expand...
Click to collapse
Yea the reason it happened is because I installed wrong adb language on my axon through USB debugging and external app
Now it possible to get into recovery
I just don't know what to do next
I tried few things but I always keep getting errors
You can try to install TWRP.
You will have a lot of option.
There is no option to restor the phone in the official recovery ?
billy_boolean said:
You can try to install TWRP.
You will have a lot of option.
There is no option to restor the phone in the official recovery ?
Click to expand...
Click to collapse
I tried to use twrp but the computer doesn't recognize My axon
You need to install driver first...
billy_boolean said:
You need to install driver first...
Click to expand...
Click to collapse
I tried but after the install the drivers and cheak them in the device manager in my computer
The name of the driver was London marshesll something
And not what I saw in the guide - adb something
And it didn't recognize my device
I wrote also adb reboot bootloader
And it gives me error massage
I would be more then happy to give someone 30$ now..
Just that my axon will work
Did you root your phone, or just use ADB to sideload a file? If it's wasn't rooted/unlocked, then a factory reset should take care of it, as nothing done via ADB in that setup would impact the system partitions.
If you used the unofficial bootloader unlocking, then you'll have to follow other people's restore guides.
As @TeutonJon78 mention, a factory reset will do the job youan boot to stock recovery using adb
Code:
adb reboot recovery
Or doing it manually,
- Completely Power off your device
- Press and HOLD Volume UP and Power button.
- once you boot to recovery just use your volume buttons to navigate FACTORY RESET.
- Reboot System
holding up and down at the same time. get to fastboot mode it says secure boot: enabled and device state: locked. then i entered to recovery mode, and press on "wipe data/factory reset" (said it was successfully finished). then i pressed on "reboot system now". still its stuck on the zte logo
liron lev said:
holding up and down at the same time. get to fastboot mode it says secure boot: enabled and device state: locked. then i entered to recovery mode, and press on "wipe data/factory reset" (said it was successfully finished). then i pressed on "reboot system now". still its stuck on the zte logo
Click to expand...
Click to collapse
I will be honest man. I bricked mine too. Everybody has a step by step guide that they say works. I followed them step by step. They did not work. I have an RMA open on my phone and fedex is taking it to ZTE. Use the warranty. Until Zte puts online the full factory images for us to use there is no real way to fix these things.
liron lev said:
holding up and down at the same time. get to fastboot mode it says secure boot: enabled and device state: locked. then i entered to recovery mode, and press on "wipe data/factory reset" (said it was successfully finished). then i pressed on "reboot system now". still its stuck on the zte logo
Click to expand...
Click to collapse
Are you from Israel?
---------- Post added at 11:40 PM ---------- Previous post was at 11:38 PM ----------
I know how to help you if you can tell me which bootloader version you have? Did you unlocked it? did you use Tenfar's method to root it?
tabletalker7 said:
I will be honest man. I bricked mine too. Everybody has a step by step guide that they say works. I followed them step by step. They did not work. I have an RMA open on my phone and fedex is taking it to ZTE. Use the warranty. Until Zte puts online the full factory images for us to use there is no real way to fix these things.
Click to expand...
Click to collapse
Were you playing around with the rooting/unofficial bootloader? It should be very hard to actually brick the device without doing those things, and nothing a factory reset shouldn't fix.
If one's playing around with unofficial modifications, then they should take all precautions to make sure to know how to recover the device before hand. There's still a lot of moving pieces between potentially faulty TWRP bugs and no image file.
liron lev said:
holding up and down at the same time. get to fastboot mode it says secure boot: enabled and device state: locked. then i entered to recovery mode, and press on "wipe data/factory reset" (said it was successfully finished). then i pressed on "reboot system now". still its stuck on the zte logo
Click to expand...
Click to collapse
Did you let it sit for awhile? First runs after a factory reset can take up to even 10 minutes to boot fully. If it still doesn't work again, check if the recovery menu has another option like wipe cache/davlik, which maybe also needs to run if they have a bug in the recovery code about resetting data. If you hadn't touch anything using the tools on this forum, and none of the factory reset/wipe data/wipe cache stuff helps, then you probably have a faulty phone. Just sideloading an app shouldn't be able to corrupt a locked system partition.
The OP of this thread hasn't yet clarified if he was just sideloading files on a normal system (which should be totally fixable unless his phone has an actual flash problem) or if he had been tinkering with other things first.
TeutonJon78 said:
Were you playing around with the rooting/unofficial bootloader? It should be very hard to actually brick the device without doing those things, and nothing a factory reset shouldn't fix.
If one's playing around with unofficial modifications, then they should take all precautions to make sure to know how to recover the device before hand. There's still a lot of moving pieces between potentially faulty TWRP bugs and no image file.
Did you let it sit for awhile? First runs after a factory reset can take up to even 10 minutes to boot fully. If it still doesn't work again, check if the recovery menu has another option like wipe cache/davlik, which maybe also needs to run if they have a bug in the recovery code about resetting data. If you hadn't touch anything using the tools on this forum, and none of the factory reset/wipe data/wipe cache stuff helps, then you probably have a faulty phone. Just sideloading an app shouldn't be able to corrupt a locked system partition.
The OP of this thread hasn't yet clarified if he was just sideloading files on a normal system (which should be totally fixable unless his phone has an actual flash problem) or if he had been tinkering with other things first.
Click to expand...
Click to collapse
The factory reset made my phone lose it's IMEI. Everyone said follow this certain guide. After following that guide and getting more help after that I had an AXON 7 that wouldn't turn on at all. Without full factory images from ZTE I won't touch the software. ZTE can fix it.
tabletalker7 said:
The factory reset made my phone lose it's IMEI. Everyone said follow this certain guide. After following that guide and getting more help after that I had an AXON 7 that wouldn't turn on at all. Without full factory images from ZTE I won't touch the software. ZTE can fix it.
Click to expand...
Click to collapse
Which guide did you follow? A Factory reset form within the stock software or stock recovery shouldn't cause that problem at all, as it should only be wiping data, cache, Davlik, and potentially the "media" portion of the internal storage.
TeutonJon78 said:
Which guide did you follow? A Factory reset form within the stock software or stock recovery shouldn't cause that problem at all, as it should only be wiping data, cache, Davlik, and potentially the "media" portion of the internal storage.
Click to expand...
Click to collapse
The factory reset that made it lose the IMEI - it was completely stock then!
liron lev said:
Hi
Yesterday I got my axon 7 and it worked perfect.
Now I was wanted to change the language
So I downloaded as file that in my language
And I tried to install him .
And it worked by the adb software when the axon connected to the computer
So I went to the application in my phone and changed it to my language after USB debugging and developer option is worked
Then the phone was changed to my language and crashed
Now the axon just show the start logo and stuck in restart loop. so I tried to do few thing through your forum , but nothing helped ..
I also cleared the cache through recovery mode but it also didn't help
Its like the axon can't upload the operating system
Thanks a lot for who will help me here.
Also if it possible to send money through PayPal
And if it's legal I will send 30$ to the first that will help me solve this problem
Click to expand...
Click to collapse
I could help you, please pm.
i tried to use the appliction "morelocale2" to chnge my phone language.
i did turn on the usb debugging option through Developer Options.
it all went good until i tried to choose my language from the app (morelocale2) it change to my language got stucked and start looping over and over. (start up and shut dowm).
after that i cleand evrything such as: wipe data/factory and cache data, and then i restart the phone. it is stoped looping but got stucked on logo zte. and after i cleaned the data i waited few houres.
i also think i used an old version of "morelocale2".
and yes im from israel...
liron lev said:
i tried to use the appliction "morelocale2" to chnge my phone language.
i did turn on the usb debugging option through Developer Options.
it all went good until i tried to choose my language from the app (morelocale2) it change to my language got stucked and start looping over and over. (start up and shut dowm).
after that i cleand evrything such as: wipe data/factory and cache data, and then i restart the phone. it is stoped looping but got stucked on logo zte. and after i cleaned the data i waited few houres.
i also think i used an old version of "morelocale2".
and yes im from israel...
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.wanam
download this app
install it
search hebrew in hebrew
choose hebrew (iw)
accept the root prompt
reboot your phone
everything will be fine
If you have bootloop issues these are not related to the app!
if you need help with this contact me!
you have my info in pm.
Hey guys, my phone d802 just wont boot, it powers off mid boot, its not even a bootloop, I've tried everything and it just doesn't work, the only thing I want at this point is to recover my files cause I already got a new phone, here's what I've tried and failed:
1) Getting into recovery: I have TWRP installed I just can't get into recovery, I tried all the possible button combinations to get into recovery and no one works. The VolumeDown+Power (wait for LG logo) - release - press both Volume Up and Down -> gets me into the factory reset setting, but from here if I wanna proceed I have to delete all user data, which is exactly what Im trying to recover, so this wont work for me as I dont wanna save the phone just the files, some people say you can press power button 3 times from this screen to get to recovery but doesn't work for me.
2) Download Mode: I can get into download mode but then it says "Firmware Update" "Do not unplug the USB connection until blabla..." but it stays at 0% all the time. My pc recognizes the device but doesn't allow me to access files and ADB doesn't work from here, the LG Tool can upgrade the phone to OG firmware but the phone doesn't have enough storage for the update, so the tool prompts me to delete files, which I don't have access to, so im screwed.
HELP! I just need a way to get into TWRP so I can transfer my files to the PC after which I dont care if the phone explodes, someone help me!
LRC1710 said:
...gets me into the factory reset setting, but from here if I wanna proceed I have to delete all user data, ...
Click to expand...
Click to collapse
That's not correct. Don't worry. After pushing the factory reset you can confirm it and the phone will boot into TWRP.
Jan Philipp said:
That's not correct. Don't worry. After pushing the factory reset you can confirm it and the phone will boot into TWRP.
Click to expand...
Click to collapse
I know it will boot into TWRP after confirming it, but it will wipe all my data! and I dont wanna save the phone I wanna save the data! I need a way to get into TWRP WITHOUT ERASING USER DATA!
It just boots TWRP and nothing more. The reset will be skipped. I know the phone says it's going reset itself but it won't. Normally the factory-reset button combination opens the pre-installed recovery which performs the reset. But it's gone since you flashed TWRP. The factory reset can now be done with TWRP.
Jan Philipp said:
It just boots TWRP and nothing more. The reset will be skipped. I know the phone says it's going reset itself but it won't. Normally the factory-reset button combination opens the pre-installed recovery which performs the reset. But it's gone since you flashed TWRP. The factory reset can now be done with TWRP.
Click to expand...
Click to collapse
I think I love you dude you saved my life! I had info there that I just couldn't afford to lose, thanks a lot!
LRC1710 said:
I think I love you dude you saved my life! I had info there that I just couldn't afford to lose, thanks a lot!
Click to expand...
Click to collapse
You're welcome. :good:
I have been reading some post about this matter, and I've found an interesting choice, but can't try it yet, I haven't got the enough time use of the device yet.
You can go and read it in the link I inserted before and -here- too again.
Or read it here:
sanijsnj said:
I think clicking on 'Reboot' on the unlock tool sends the script to erase all data.... Here's what I did:
1. unlock bootloader normally
2. unplug phone without clicking on 'Reboot' button at the end
3. Force power off by holding power button for about 10s
and when it rebooted.. it went right into system..phone booted normally with the 'unlocked' logo at boot with all my data untouched.
Click to expand...
Click to collapse
Can anyone confirm this?
I've a Redmi Note 7 w/ MIUI 11.0.4 EEU
I want to try it,but I don't know if it may cause problems
update...clicking on reboot also doesn't erase memory... I've flashed a lot of custom rom on my phone...returned to stock using MIUI flash tool.......unlocked again....
probably changed something on the firmware of the phone idk.