Hi everyone,
I have joined and posted today as I am struggling to find information on my Hizpo headunit, which I am lead to believe is just a generic chinese unit with a bezel and firmware slapped onto it.
I am wanting more from my head unit like better apps, connect to my OBD, resume music when turned on and faster boot time.
The issue I am having is threads mentioning MTCD, etc. I am not sure how to figure this out but I am assuming this is related to the MCU build. If this is true them my build isnt that and is something different.
I have have read a number of threads relating to this MCU and were utterly useless.
The details the head unit provides are:
Model Number: CAR AUDIO
Android Version: 5.1.1 (which I am lead to believe is not true)
Kernel Version: 3.4.67 Wed Apr 19 12:02:15 HKT 2017
Build Number: ALPS.LD_KK1.MP10.V1.6
MCU: SM92B1.161111.V1-CYD-B3
DVD: SM92B1.161201.V1.2-CYD-TTL-12XH-DIG
I want to avoid buying another head unit and playing with that one as the chances of buying the same one is slim and if I get a more known set up I would have to wire that one in.
Thanks for any advice in advance.
For those who are still playing with this model.
After 4 hours thinking my touch screen needing calibrating and discovering the touch panel had failed, i now have the code for the admin menus.
12580
Some handy stuff in there.
How do you get into admin menu? I don't see anything related to admin or settings.
Hi all,
I’m seeking assistance to find out the password for my head unit. I purchased the vehicle which came with an android head unit 12 in Tesla screen. I tried to find out the password to reset the unit but it seems to be impossible. The car was imported from Japan so there is no way of finding out the password. It appears the screen is a 2018 version.
I did take a picture of the MCUvers information attached
Any assistance or guess of the password would be much appreciated. I don’t even know the model of the head unit :’(
hi i have same problem What should i do
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
livewyr said:
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
Click to expand...
Click to collapse
Did you check the wifi antenna?
I have a 407 - (2007) - does your head unit allow for aircon and heating/ventilation controls and all the canbus functions?
my orange dispaly is failing so thought I'd install one of these instead
Do you have a link for the one you bought? I've been looking for octacore - most are quad
Thanks
Found some interesting info here
[SOLVED] I can’t turn ON my Wi-Fi... Need help
I have update my mtce px3 Android 7.1 MTCE with a px5 Android 6 and charged malaysk rom based on Android 8.0... but afther that i can’t turn ON my Wi-Fi. Bluetooth working perfect... all the thing working good.. only Wi-Fi don’t wont to turn on...
forum.xda-developers.com
maybe unplug any usb's you have, and/or request a firmware update from vendor
snailer said:
Did you check the wifi antenna?
I have a 407 - (2007) - does your head unit allow for aircon and heating/ventilation controls and all the canbus functions?
my orange dispaly is failing so thought I'd install one of these instead
Do you have a link for the one you bought? I've been looking for octacore - most are quad
Thanks
Found some interesting info here
[SOLVED] I can’t turn ON my Wi-Fi... Need help
I have update my mtce px3 Android 7.1 MTCE with a px5 Android 6 and charged malaysk rom based on Android 8.0... but afther that i can’t turn ON my Wi-Fi. Bluetooth working perfect... all the thing working good.. only Wi-Fi don’t wont to turn on...
forum.xda-developers.com
maybe unplug any usb's you have, and/or request a firmware update from vendor
Click to expand...
Click to collapse
I can't find my exact seller listing but below link is a similar eBay listing for the same model I have got.
Peugeot 407 Android 10 PX5 4-64
Yes, it integrates seamlessly with canbus / climate control etc. It comes with a canbus connector. There's an option to connect reverse camera if you want to. But you have to buy the reverse camera separately. Other than that there's a GPS antenna, built in and extra microphones for phone calls, memory card slot, USB slots etc.
I wouldn't recommend any sellers for this kind of after market head units as they are all sold / shipped by overseas / international sellers. There's always a risk with this type purchases. So proceed with caution. If you end up getting a good unit, the risk is well rewarded. Your Pegueot gets a major upgrade.
All the best!
Thanks!
I've been looking at these ones.
Still undecided
Might just get a new mfd screen & keep using my phone!
plamenangelov said:
I have a problem with my auto daylight, my old navigation system was Rneg and all work fine. When start engine auto daylight in on but when install new Witson auto daylight stop work, i must start it manuali on setting via Witson unit. I have menu auto daylight runigh light when touch it, light is on but button still unactive.
Click to expand...
Click to collapse
Maverickky said:
I have the same problem, any solution?
Click to expand...
Click to collapse
livewyr said:
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
Click to expand...
Click to collapse
Have you guys found any solutions to your canbus problems with Peugeot 407? I lost my automatic headlights / daylights which I'd love to have back. Have you encountered and solved other issues with Android head units?
I can't either enable some car functions from car app from head unit (automatic lights, rear wiper, parking radar etc.). Can you see the outside / inside temperatures of the car somewhere? My A/C works somehow (responses like it should to physical buttons, but I bet it has mechanical faults instead communication problems with head unit).
gratnak said:
Have you guys found any solutions to your canbus problems with Peugeot 407? I lost my automatic headlights / daylights which I'd love to have back. Have you encountered and solved other issues with Android head units?
I can't either enable some car functions from car app from head unit (automatic lights, rear wiper, parking radar etc.). Can you see the outside / inside temperatures of the car somewhere? My A/C works somehow (responses like it should to physical buttons, but I bet it has mechanical faults instead communication problems with head unit).
Click to expand...
Click to collapse
What did the reseller suggest when contacted for support.
livewyr said:
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
Click to expand...
Click to collapse
Hello there,
See this workaround.
Custom ROMs such as @Hal9k_ 's Mod V5 have workarounds for this under Mod settings. In that ROM, go to Mod settings, select "Hardware settings" and toggle on the "Reset USB devices when booting or waking up".
Good day I have had my Pumpkin Auto Head unit now since 2018 with a few headaches over the years that I can't ignore any longer. Mainly it freezes and crashes only option is to to a reset by powering off and back on and reconnect it to wifi and start my navigation again. Spotify and other apps just crash and shutdown along with a few other things like wifi not connecting sometimes and bluetooth working when it feels like it. I have contacted the manufacturer but all they do is recycle they're solutions by copying and pasting them to us customers. They ignore us current customers and just push newer models in frustrating, No new updates, no firmware update no Os updates. I was wondering if someone here can help me get something done as in updating this head unit so I can get a year or two more out of it as I will be purchasing a new car in that time. Until then id like to maximize the life if this head unit till then if possible. Thank you members in advance.
Processor Type: UltraOcta-T8
Android Version: 7.1.2
MCU Version: T8.3.19-11-00-453101-Universal
System version: V9.2._20180330.180B33_KED3-5 (last version provided by the manufacture)
Search forums with MCU prefix.
It appears i have bought an android head unit that boots showing android 11, says its running android 12 in device information app but has API 27. Should i download an update to make this run better or just use it as is.
ALPS 8227L_demo
1 rom 16 ram
JCAC1003-OC2-V1.0.45R2-221014_1723
CPU ARMv7 Processor rev 3
Thanks for any help with this.
In addition to this I notice no canbus version...will I have to load anything to have the canbus work for my mercedes ml320?
Seems as if it's very bare bones as I don't even have any canbus settings under factory setup.