I've purchased an android head unit from seicane for 2012 subaru forester (9" headunit with trim with vent holes). I know they're just a seller.
I'm looking for help as to what manufacturer and what mcu version. So that I can update the mcu.
Reason being the screen is not responsive.
Had to use keyboard and mouse to go into settings.
I will include what was said on the screen under system settings and about device below
Any help would be greatly appreciated.
I'm very new to the android head unit. Only had it for less than a week.
System setting
Appver: K20M_K2001M_NWD_GB-20180517.14.30.N0023t3
Platformver: K20M-2018/05/17[14:31:00]-10.00
MCU Version: V2.0-FF01-20180313-A02-CAN0000-00-00-DVD00000000-00
About device
Model number: QUAD-CORE T3 K2001M
Android Version: 6.0.1
Memory capacity: 1GB
Storage capacity: 16.00GB
Thank you very much
https://forum.xda-developers.com/an...-units-qa/help-to-identify-unit-t3807677/amp/
I think joying is having this issue.
top 10% of touch screen wont work.
They gave an update that removes mcu google service.
Not sure whats going on.
Android kills touch screen if its out of date or what?
I ordered this unit from China and am having a tough time deciding exactly what it is. Settings say it's a T3-P1. Aliexpress showed that if it's 8 core it is a T8. The thing that's confusing me is the MCU Version which shows "stm32-20190924-11-kc1-38" instead of the normal T8 that I've been seeing with the T8 units discussed on here. STM32 seems to be common in the Rockchip PX6 units? My processor is listed as sun8iw11 but everything I search on that comes up for quad core and the settings info shows it to have 8 cores.
I was hoping someone could help lessen the confusion I have with this unit. I believe it to be the T8, but the STM32 MCU version has me scratching my head as it doesn't seem to match any of the T8 MCU's that all seem to start with T8 I've read about on here. All I really want to do is get the development settings enabled, which seem to be missing completely as far as I can tell, so I can set a mock location app. Also on that note, the extra settings on this unit is hidden, you have to tap os version then kernel version 3 times and it never prompts for password. Root would be cool too, but I'm not very hopeful that it is possible on this unit, although, figuring out exactly what I have is the first step to any mods anyways.
I've included a couple pictures of the settings pages on the unit and one for the technical specs that were listed on the aliexpress page when unit was purchased. All help is appreciated!
Should be noted as well, tapping on Kernel version, OS version 3 times to access the hidden settings is something I found in a RockChip PX6 thread. It's weird, I almost feel like it has T8 hardware running PX6 software and MCU or something.
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
livewyr said:
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
Click to expand...
Click to collapse
Did you check the wifi antenna?
I have a 407 - (2007) - does your head unit allow for aircon and heating/ventilation controls and all the canbus functions?
my orange dispaly is failing so thought I'd install one of these instead
Do you have a link for the one you bought? I've been looking for octacore - most are quad
Thanks
Found some interesting info here
[SOLVED] I can’t turn ON my Wi-Fi... Need help
I have update my mtce px3 Android 7.1 MTCE with a px5 Android 6 and charged malaysk rom based on Android 8.0... but afther that i can’t turn ON my Wi-Fi. Bluetooth working perfect... all the thing working good.. only Wi-Fi don’t wont to turn on...
forum.xda-developers.com
maybe unplug any usb's you have, and/or request a firmware update from vendor
snailer said:
Did you check the wifi antenna?
I have a 407 - (2007) - does your head unit allow for aircon and heating/ventilation controls and all the canbus functions?
my orange dispaly is failing so thought I'd install one of these instead
Do you have a link for the one you bought? I've been looking for octacore - most are quad
Thanks
Found some interesting info here
[SOLVED] I can’t turn ON my Wi-Fi... Need help
I have update my mtce px3 Android 7.1 MTCE with a px5 Android 6 and charged malaysk rom based on Android 8.0... but afther that i can’t turn ON my Wi-Fi. Bluetooth working perfect... all the thing working good.. only Wi-Fi don’t wont to turn on...
forum.xda-developers.com
maybe unplug any usb's you have, and/or request a firmware update from vendor
Click to expand...
Click to collapse
I can't find my exact seller listing but below link is a similar eBay listing for the same model I have got.
Peugeot 407 Android 10 PX5 4-64
Yes, it integrates seamlessly with canbus / climate control etc. It comes with a canbus connector. There's an option to connect reverse camera if you want to. But you have to buy the reverse camera separately. Other than that there's a GPS antenna, built in and extra microphones for phone calls, memory card slot, USB slots etc.
I wouldn't recommend any sellers for this kind of after market head units as they are all sold / shipped by overseas / international sellers. There's always a risk with this type purchases. So proceed with caution. If you end up getting a good unit, the risk is well rewarded. Your Pegueot gets a major upgrade.
All the best!
Thanks!
I've been looking at these ones.
Still undecided
Might just get a new mfd screen & keep using my phone!
plamenangelov said:
I have a problem with my auto daylight, my old navigation system was Rneg and all work fine. When start engine auto daylight in on but when install new Witson auto daylight stop work, i must start it manuali on setting via Witson unit. I have menu auto daylight runigh light when touch it, light is on but button still unactive.
Click to expand...
Click to collapse
Maverickky said:
I have the same problem, any solution?
Click to expand...
Click to collapse
livewyr said:
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
Click to expand...
Click to collapse
Have you guys found any solutions to your canbus problems with Peugeot 407? I lost my automatic headlights / daylights which I'd love to have back. Have you encountered and solved other issues with Android head units?
I can't either enable some car functions from car app from head unit (automatic lights, rear wiper, parking radar etc.). Can you see the outside / inside temperatures of the car somewhere? My A/C works somehow (responses like it should to physical buttons, but I bet it has mechanical faults instead communication problems with head unit).
gratnak said:
Have you guys found any solutions to your canbus problems with Peugeot 407? I lost my automatic headlights / daylights which I'd love to have back. Have you encountered and solved other issues with Android head units?
I can't either enable some car functions from car app from head unit (automatic lights, rear wiper, parking radar etc.). Can you see the outside / inside temperatures of the car somewhere? My A/C works somehow (responses like it should to physical buttons, but I bet it has mechanical faults instead communication problems with head unit).
Click to expand...
Click to collapse
What did the reseller suggest when contacted for support.
livewyr said:
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
Click to expand...
Click to collapse
Hello there,
See this workaround.
Custom ROMs such as @Hal9k_ 's Mod V5 have workarounds for this under Mod settings. In that ROM, go to Mod settings, select "Hardware settings" and toggle on the "Reset USB devices when booting or waking up".
i got a headunit, Andream 7" android 9.0 PX6 for Audi A4/Q5 B8.
Andream headunit (Link to unit / seller)
link to suplier (link to suplier)
its a PX6 RK3399 unit acording to CPU-Z, it has some wierdness in CPU-Z, iwill post those pictures also, it reports RK3066 and RK30board, but it looks like they used a RK3066 board with a RK3399 unit, the processors show up properly.
but im looking for the MCU version, but i cant figure out what it is, the version number dont give me anything.
you can se in the pictures the number, but if its hard to read it says MCUVers: 415175bLZH-Q5-AL-7-190817[170325]
i have spent the day trying to google the number, found a nother post here on QXDA but no information about what MCU thats in it.
i want to flash it with malaysk or Hal, but since i dont know the right MCU i am afraid to brick it.
i posted from CPU-Z, about unit and from the settings in the UI.
the API level from CPU-Z atleast comfirms that its a actual android 9, not a lower with a fake tag on it.
Hi guys,
I have owned different MTCD headunits (all px 3/5).
For my new car I ordered a 64/4 headunit but it seems like it's a different chipset etc.
As I have a few problems with is and the seller isn't respnding (yet) I'll hope you can help me identify the unit so I can update firmware/mcu etc
Cons:
Biggest issue: GPS is not working. Because of that the time and date are off. If adjusting it manually it stays on the time and date from where the unit gets to sleepmode and won't adjust untill manual adjustment.
I have a annoying humming sound in the OEM subwoofer. It wasn't there with the Kenwood headunit that was installed before this one. Still can't solve it. It also humms when the RCA aren't attached so it seems a power input issue to the amp of the subwoofer. Still figuring out what to do about it.
Pros:
It seems to have wireless Android Auto besides wireless Carplay. It was not advertised but when I put on my hotspot from my mobile, it autostarts Android Auto on the headunit. Very nice!
Bought on Hipzo store (Aliexpress).
CPU INFO: UIS8581A (Octa 1.6GHZ)
MCU: 2021.12.10 15:04:26 NOR_53_L6315_G23P48F64_V:1.0
Android 11 (not sure, seems like Android 10 because of buildnumber)
buildnumber: QP1A.190711.020
System info: APP 1024x600 2021-12-11
Any help is appreciated.
Hello,
Could you share the findings about this head unit?
I have the same head unit, except for CPU and display resolution. I am still trying to understand what is the version which is compatible with this head unit.
Any info is well appreciated.
UIS7862 FYT based unit