G955F to G955FD firmware? - Samsung Galaxy S8 Questions and Answers

Hi,
I have a G955F which is running a Australia android 9.0 rom, I need to flash to G955FD for work but there is no rom for this phone for Australia? so I was going to flash a UK rom onto it will this still work? also I couldn only find a update for the G955FD not the complete rom can anyone link me the files I need please.

liveordie said:
Hi,
I have a G955F which is running a Australia android 9.0 rom, I need to flash to G955FD for work but there is no rom for this phone for Australia? so I was going to flash a UK rom onto it will this still work? also I couldn only find a update for the G955FD not the complete rom can anyone link me the files I need please.
Click to expand...
Click to collapse
The F and FD are the same firmware.

spawnlives said:
The F and FD are the same firmware.
Click to expand...
Click to collapse
Hi Mate, that what I've been reading if that's the case how are people flashing F firmware onto the FD and losing there dual sim support? and how can I flash the FD firmware onto a F.

liveordie said:
Hi Mate, that what I've been reading if that's the case how are people flashing F firmware onto the FD and losing there dual sim support? and how can I flash the FD firmware onto a F.
Click to expand...
Click to collapse
Flashing stock firmware requires Odin ( PC app ).
As for errors flashing firmware it's a bit hard to say, have to take it case by case, but in general terms it's usually user error. In general flashing stock firmware shouldn't touch the protected area which holds the IMEI information.

spawnlives said:
Flashing stock firmware requires Odin ( PC app ).
As for errors flashing firmware it's a bit hard to say, have to take it case by case, but in general terms it's usually user error. In general flashing stock firmware shouldn't touch the protected area which holds the IMEI information.
Click to expand...
Click to collapse
Oh I see, is there a way I can turn my G955F into a dual sim? I've seen this done on the G955N, from hardware the G955F is the same as the FD and its only the firmware stopping it from working, I get a signal when a sim is in the 2nd slot but because the phone only have 1 IMEI it doesn't work, the FD has a sim manager which is on the F but not usable.

liveordie said:
Oh I see, is there a way I can turn my G955F into a dual sim? I've seen this done on the G955N, from hardware the G955F is the same as the FD and its only the firmware stopping it from working, I get a signal when a sim is in the 2nd slot but because the phone only have 1 IMEI it doesn't work, the FD has a sim manager which is on the F but not usable.
Click to expand...
Click to collapse
I have only very briefly looked at converting single sim to dual sim but haven't really gone into it so I probably won't be of much help. Biggest problem will be injecting a second IMEI slot to you phone to accept the second sim card. The firmware is the same but requires the second IMEI slot to get dual sim capabilities.

spawnlives said:
I have only very briefly looked at converting single sim to dual sim but haven't really gone into it so I probably won't be of much help. Biggest problem will be injecting a second IMEI slot to you phone to accept the second sim card. The firmware is the same but requires the second IMEI slot to get dual sim capabilities.
Click to expand...
Click to collapse
I ended up rooting my phone to be able to do this but it was worth it as i don't give a rats about Samsung pay lol.

Related

First Balong then bootloop finally brick (Trash,current state)

Hi all,
If you have more idea then me I appreciate the help.
I started from a career locked phone with this fw: ALE-L21C128B130
I unlocked the device officially getting a code from mobile provider.
I made a fastboot flash flash to ALE- L21C432B171.
After this it becames balongc50b311. After it I tried the vendor app to make it to the right version, but the update always failed.
Here I made a mistake, the goal was to make it dual sim, I flashed a wrong fw, L21C432B550 (I think this was), and now it is impossible to use fastboot, neither adb, it's in a bootloop and I tried a lot update app with the 3 button method, all of them failed. Tried the 2 button wipe as well it doesn't help.
I tried transit fws as well, but none of them can pass the bootloop.
I think I need a fw that can work with a this hanged flashed version.
Any idea to get it back?
I should get the picture how the fw-s connected together, which restoration I have to use for what and which transfer and something like this connected to which firmware. Maybe it can get back the phone.
Thank you.
you said your goal is to make dual sim, but you came from dual sim????? B130 is dual sim version, and c128 is Hungarian I think, maybe Telenor. you are actually installed single sim over dual sim and then again dual sim mm, it is no wonder that he is in bootloop. with so many guidelines in the forum Try to return b130 DUAL SIM http://www.carbontesla.com/2015/07/download-huawei-p8-lite-b130-stock-lollipop-firmware-magyar-telecom/#more-3517
do not forget:
even numbers dual sim
odd numbers single sim
Hi, at the beginning I've been on single sim, not dual sim.
Correct, telenor. On the link it is telekom, does it matter or just use a 130 one?
What's your first version?
Ker21 said:
What's your first version?
Click to expand...
Click to collapse
This was the original one: ALE-L21C128B130
B130 is a Dual Sim version, and prefix c128 means branded to Hungarian Telenor network, Try with link I gave you, and report back. dowonload speed is very slow so maybe U can find on some other server, just be sure it is C432B130
Ok, I try the suggested one:
ALE-L21HUNC150B130
|3adb0y said:
Ok, I try the suggested one:
ALE-L21HUNC150B130
Click to expand...
Click to collapse
No luck
Can I do anything with the TWRP app or nothing?
Current situation:
When I press power button and up it can go to the menu.
When attach the phone to the computer my computer sees a drive but couldn't open it and couldn't recognized by hisuite or anything.
I'll bring it to the service, it's end
When I get a new one I'll try to make it dualsim again
I'll get the same model, so what should be the steps to make it dualsim?
Ok so you were at telenor branded (c128) but you tried flashing European (c432) version firmwares. Just by unlocking your carrier, will yoube able to do that? I guess you first need to change your region to c432 (unless after unlocking your carrier sets you to c432, afterall Hungary is in Europe). But if it doesn't, then you must change your oeminfo first.
Here's the link to the tutorial
just be sure it is C432B130
Click to expand...
Click to collapse
|3adb0y said:
Ok, I try the suggested one:
ALE-L21HUNC150B130
Click to expand...
Click to collapse
Could you explain me why it is so hard to understand. Use C432B130 as explained, and you flashed C150B130 and still think why it doesn't work
Vika__ said:
Could you explain me why it is so hard to understand. Use C432B130 as explained, and you flashed C150B130 and still think why it doesn't work
Click to expand...
Click to collapse
Why? Because it's not possible to download from anywhere the C432B130 version fw.
|3adb0y said:
Why? Because it's not possible to download from anywhere the C432B130 version fw.
Click to expand...
Click to collapse
Oh, then it was my bad. And i didn't meant to be mean.

S7 Edge G935-FD Dual SIM problem

Hello guys. This is my first Samsung device. It's network locked here in the Philippines and I flashed UK firmware to get Nougat update. Since thre is an official update available now in our country, I flashed the firmware downloaded from sammobile with CSC SMA (philippines Smart). The problem is, SIM 2 is not working for a different SIM card (ex. Globe). Does anyone know how to fix this issue? Before only SIM 1 is Network locked and SIM 2 is openline. Now they are both Network locked.
Up
Up
vince_junior said:
Up
Click to expand...
Click to collapse
As far as I know, Dual SIM phone has issues when trying to unlock the phone. they are problematic and sometimes they refuse to work. I recommend you take it to Samsung assistance, maybe they can do something with your firmware and make the phone work again.

Converting a G935f to a G935fd (single SIM to dual SIM)

All experts,
I would like to 'enable' on my S7 edge the dual SIM function. The 'international' card holder could care 2 Nano SIM card, but the G935F is supporting just one SIM.
It's possible to do this without root? It's possible to install the G935FD firmware or are there radio baseband modifications nesessary?
In addition, I need to run the Blackberry Works app (former Good). This app is not running on a rooted phone.
Thanks for any comment and help.
Schorty
You can't.
Single sim variant have only 1 imei number but dual sim variant have 2 which are for each sim. You can't just add more imei to your phone and even if you can, it is illegal.
Also card holder of single sim variant cannot hold 2 sim cards, only 1 sim card+microsd.
G935fd and G935f firmwares also are identical. So you can flash it on your phone but it's not going to enable dual sim on single sim variant.
Sent from my SM-G935F using Tapatalk
schorty said:
All experts,
I would like to 'enable' on my S7 edge the dual SIM function. The 'international' card holder could care 2 Nano SIM card, but the G935F is supporting just one SIM.
It's possible to do this without root? It's possible to install the G935FD firmware or are there radio baseband modifications nesessary?
In addition, I need to run the Blackberry Works app (former Good). This app is not running on a rooted phone.
Thanks for any comment and help.
Schorty
Click to expand...
Click to collapse
While don't you save yourself the strength and buy the dual sim version, because like the other guy above said, its impossible to use dual sim on a single sim. Backup your data, get the dual sim version and restore back.
Thanks for the first feedback.
- single SIM and dual SIM card holders are available at eBay etc. The HW of the two phone is 100% identical. A friend of mine converted his G935f to G935fd with the support of a Vietnamese service guy over TeamViewer. My problem is the root after this.
BTW: Buying a DUOS is not a problem, it cost just some money
Thanks for expert tips...
NonXtreme said:
You can't.
Single sim variant have only 1 imei number but dual sim variant have 2 which are for each sim. You can't just add more imei to your phone and even if you can, it is illegal.
Also card holder of single sim variant cannot hold 2 sim cards, only 1 sim card+microsd.
G935fd and G935f firmwares also are identical. So you can flash it on your phone but it's not going to enable dual sim on single sim variant.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Can i install indian firmware g935fd on g935f version?
Samsung G935F to G935Fd POSSIBLE tested by me
aytida4 said:
Can i install indian firmware g935fd on g935f version?
Click to expand...
Click to collapse
It's possible g935f to g935fd no need flash any firmware
I tested and its works fine
on device been single imei and now two same imei
working fine with 2 sim cards
BUT NO CHANGE THE IMEI ITS HIS FACTORY IMEI !!!
Edit: Nvm worked it how.
benjamen50 said:
Edit: Nvm worked it how.
Click to expand...
Click to collapse
? Nvm ?
Отправлено с моего SM-G900FD через Tapatalk
It IS possible to convert G930/5F to G930/5FD. Only you have to do is clone your IMEI as IMEI 2 using Z3x or other software and replace SIM + microSD tray to SIM + SIM/microSD or DIY
That's in theory, but I personally need assist in:
1. Downgrading to Nougat, because Z3x doesn't support (yet) the newest /efs to modify cert to add that IMEI 2 or at least I can't find new enough which supports Oreo
1.1 Need to factory reset!
2. Getting root
3. Adding IMEI 2
3.1. Need to factory reset!
4. Updating back to official Oreo without root, if possible. I'm perfectly fine with normal functions, don't need the root for anything. Only I need is second SIM. I believe that I need to flash official Nougat first over rooted Nougat and update it using FOTA to Oreo? If not, flashing Oreo by Odin.
I will very appreciate any help with confirming these steps (is it correct way?) and helping me to get needed files and stuff to do it.
All experts,
I have replace the motherboard of my Samsung Galaxy S7 Edge, dual sim variant (SM-G935FD) with that of single sim variant but a frequent prompt of sim card mode shift is happened, saying "the sim card mode is witched from dual sim to single sim mode, which requires a rest to factory setting and restart". Since there is only a restart option, I'm forced to hit it and restart frequently but not working yet. How can I fix this problem?
Thanks for any comment and help!
Yoseph
I also used z3x and it works flawlessly im on Oreo s7 edge exynos.
FULL GUIDE
https://forum.xda-developers.com/galaxy-s7/how-to/converting-s7-single-sim-to-dual-sim-t3881189
smashmix said:
It IS possible to convert G930/5F to G930/5FD. Only you have to do is clone your IMEI as IMEI 2 using Z3x or other software and replace SIM + microSD tray to SIM + SIM/microSD or DIY
That's in theory, but I personally need assist in:
1. Downgrading to Nougat, because Z3x doesn't support (yet) the newest /efs to modify cert to add that IMEI 2 or at least I can't find new enough which supports Oreo
1.1 Need to factory reset!
2. Getting root
3. Adding IMEI 2
3.1. Need to factory reset!
4. Updating back to official Oreo without root, if possible. I'm perfectly fine with normal functions, don't need the root for anything. Only I need is second SIM. I believe that I need to flash official Nougat first over rooted Nougat and update it using FOTA to Oreo? If not, flashing Oreo by Odin.
I will very appreciate any help with confirming these steps (is it correct way?) and helping me to get needed files and stuff to do it.
Click to expand...
Click to collapse
can you tel me how to downrenge to nuuget ?

Samsung Pay Australia

Hello fellow S8 users,
I've recently purchased a Samsung S8 SM-G950FD from eBay as I wanted the Dual SIM capability. Version image attached, I'm not entirely sure where it's from.
Unfortunately the Samsung Pay version on the phone is in Chinese as are the promotion, images attached.
Can someone tell me if it's possible to get the Australian version on Samsung Pay on this phone?
Can I just update the ROM to an Australian version? If so, would I end up losing the Dual SIM capability?
Any help on this would be much appreciated.
Thank you.
Any suggestions?
kuri_2k said:
Hello fellow S8 users,
I've recently purchased a Samsung S8 SM-G950FD from eBay as I wanted the Dual SIM capability. Version image attached, I'm not entirely sure where it's from.
Unfortunately the Samsung Pay version on the phone is in Chinese as are the promotion, images attached.
Can someone tell me if it's possible to get the Australian version on Samsung Pay on this phone?
Can I just update the ROM to an Australian version? If so, would I end up losing the Dual SIM capability?
Any help on this would be much appreciated.
Thank you.
Click to expand...
Click to collapse
Your Australia cards should work as Australia already have support for Samsung Pay. I have setup few of my Indian cards with Australian version phone. I guess you need to bear with the Chinese though. Updating XSA room will definitely disable the Dual sim option and I am not sure 950FD support 950F.
venki5star said:
Your Australia cards should work as Australia already have support for Samsung Pay. I have setup few of my Indian cards with Australian version phone. I guess you need to bear with the Chinese though. Updating XSA room will definitely disable the Dual sim option and I am not sure 950FD support 950F.
Click to expand...
Click to collapse
Yeh the Samsung Pay Application doesn't like my American Express Card....
It states that Amex is not supported in my country, but in fact it's working on my Samsung S6, and my Gear 3.
So you think changing the firmware to AU I would lose the Dual SIM capabilities?
It might just be easier to try and get the Samsung Pay and Samsung Pay Framework from AU ROM and extract it to mine maybe?
If it's anything like the S7, you should be fine putting the Australian firmware on it. I got an S7 edge from the UAE and had to flash German firmware and the T-Mobile CSC to it for spay to finally work. It'll be trail and error, but the multi sim function never went away for me.
Since almost all the international S8/S8+s are on the multi CSC ROM, all you need to do is reset your phone (preferably from the recovery menu) and put in the Oz SIM and reboot. All the regional features are activated, and you get Oz SPAY.
Using that method, I am currently using the India SPAY on an Afghanistan S8+ (Dual sim) and Taiwanese S8 and both work with all cards.
cooolzzz_guy said:
Since almost all the international S8/S8+s are on the multi CSC ROM, all you need to do is reset your phone (preferably from the recovery menu) and put in the Oz SIM and reboot. All the regional features are activated, and you get Oz SPAY.
Using that method, I am currently using the India SPAY on an Afghanistan S8+ (Dual sim) and Taiwanese S8 and both work with all cards.
Click to expand...
Click to collapse
I've actually tried to restore to factory setting 6+ times with an assortment of sim cards from Vodafone, Optus, Telstra, Macquarie (Telstra variant), samsung pay keeps loading up as Taiwanese version (Chinese)...
I've recently asked a friend to extract his Samsung Pay & Framework.apk, it still loads Taiwan Samsung pay.
I think it's region locked?
I'm going to try and restore to XSA Firmware, apparently this worked for the S7 guys, whilst retaining Dual Sim functions.
neoslink1 said:
If it's anything like the S7, you should be fine putting the Australian firmware on it. I got an S7 edge from the UAE and had to flash German firmware and the T-Mobile CSC to it for spay to finally work. It'll be trail and error, but the multi sim function never went away for me.
Click to expand...
Click to collapse
Thank you! You've just reaffirmed what I actually just read in another forum, going to give it a try and will update my findings.
kuri_2k said:
I've actually tried to restore to factory setting 6+ times with an assortment of sim cards from Vodafone, Optus, Telstra, Macquarie (Telstra variant), samsung pay keeps loading up as Taiwanese version (Chinese)...
I've recently asked a friend to extract his Samsung Pay & Framework.apk, it still loads Taiwan Samsung pay.
I think it's region locked?
I'm going to try and restore to XSA Firmware, apparently this worked for the S7 guys, whilst retaining Dual Sim functions.
Click to expand...
Click to collapse
Did you try to factory reset from recovery? Vol up + Bixby + power, wait for few seconds it goes into recovery. Put the regional SIM in, then reboot. It will reboot twice and activate SIM specific features (prominently tells you that it's doing so).
Also please post a screenshot of the Settings->Software information screen (Service provide SW ver. is 2nd last row) both before and after you complete the process.
Someone recommended me this solution after I had a similar problem with my UAE S8 and flashing other country firmware no longer works without supporting SIM card. Download Samsung Pay version 2.7.03 and try that.
oplix said:
Someone recommended me this solution after I had a similar problem with my UAE S8 and flashing other country firmware no longer works without supporting SIM card. Download Samsung Pay version 2.7.03 and try that.
Click to expand...
Click to collapse
Worked for me as well !!
oplix said:
Someone recommended me this solution after I had a similar problem with my UAE S8 and flashing other country firmware no longer works without supporting SIM card. Download Samsung Pay version 2.7.03 and try that.
Click to expand...
Click to collapse
What do you mean flashing other country firmware no longer works without supporting SIM card ?
vortexmak said:
What do you mean flashing other country firmware no longer works without supporting SIM card ?
Click to expand...
Click to collapse
Means that it doesn't matter which firmware you flash if you don't have the country's sim card because s8 will default back to factory CSC. Only way to change CSC without root is to flash with the supporting sim card installed.
cooolzzz_guy said:
Since almost all the international S8/S8+s are on the multi CSC ROM, all you need to do is reset your phone (preferably from the recovery menu) and put in the Oz SIM and reboot. All the regional features are activated, and you get Oz SPAY.
Using that method, I am currently using the India SPAY on an Afghanistan S8+ (Dual sim) and Taiwanese S8 and both work with all cards.
Click to expand...
Click to collapse
Just came across this post. Wondering if the same method works with the dual sim version of S7 (G930FD)?
Thanks.
TopGun2000 said:
Just came across this post. Wondering if the same method works with the dual sim version of S7 (G930FD)?
Thanks.
Click to expand...
Click to collapse
Has anyone here got the Australian Samsung Pay app onto the Taiwanese dual-sim model? I purchased an S8+ at $799 (compared to the RRP of $1349) but I don't want to factory reset if I don't have to.
Anyone got spay working? Pkease share what firmware version are you using.

Very confused with where my phone is from and what updates it can get

Hi,
My apologies if this is an obvious question but I'm a new Galaxy S8 user and I've gone through these forums extensively before giving up and making this post
I had someone bring along a Samsung Galaxy S8 from the US to India, and it seems to be working like charm. They ordered it online and picked up the unlocked international variant (SM-G950F)
In the Service Provider Software I see 'INS/INS/TPA'. I assume INS/INS was set because I popped in an Indian sim. TPA seems to be Panama?
Now I check my software updates and I'm stuck on the May Security Patch and there really aren't any updates for this firmware.
I want to switch to an Indian firmware but on updato and sammobile, only the SM-950FD is available for India as only the dual sim variant is sold in India
I want to flash a firmware with the latest update and also receive future OTA updates but I'm not sure which firmware to flash.
Is there no solution for me?
i can tell you only this: had bought a Dual Sim S8 in Germany, the phone was originaly from Egypt. (DBT/DBT/EGY), and received OTA's.
*but the battery life was horible
flopyro said:
i can tell you only this: had bought a Dual Sim S8 in Germany, the phone was originaly from Egypt. (DBT/DBT/EGY), and received OTA's.
*but the battery life was horible
Click to expand...
Click to collapse
Haha but I have not received a single OTA update. Maybe I missed one because it was set to auto but I'm still on the May security patch
theagentofchaos said:
Haha but I have not received a single OTA update. Maybe I missed one because it was set to auto but I'm still on the May security patch
Click to expand...
Click to collapse
Install Phone info app from google play and open the app it will show you all hardware and software information of your phone. See the CSC code and find your software according to your region.
You can flash FD firmware, it is the same.
You have dual sim model G950FD or single sim G950F
check hardware to remove sim and card socket and see the card socket is hybrid or not.
Presterin said:
You can flash FD firmware, it is the same.
Click to expand...
Click to collapse
Oh so it'll change to INS/INS/INS?
drparvez said:
You have dual sim model G950FD or single sim G950F
check hardware to remove sim and card socket and see the card socket is hybrid or not.
Click to expand...
Click to collapse
It's hybrid. Single sim
theagentofchaos said:
It's hybrid. Single sim
Click to expand...
Click to collapse
Means you have dual sim model FD
if so you can safe to flash fd firmware of any region.
drparvez said:
Means you have dual sim model FD
if so you can safe to flash fd firmware of any region.
Click to expand...
Click to collapse
No no it's a single sim with space for a micro sd card. SM-G950F
theagentofchaos said:
No no it's a single sim with space for a micro sd card. SM-G950F
Click to expand...
Click to collapse
Ok means its not hybrid socket.
Download phone info* Samsung* app from google.
Open it and check CSC and region of your phone.
theagentofchaos said:
Oh so it'll change to INS/INS/INS?
Click to expand...
Click to collapse
It doesn't matter what FW you install, you can never change it to INS as TPA is hardwired to your phone.
It should change to INS/INS/TPA. People commenting should understand that F/FD doesn't matter, as the software is the same. It's discussed here MANY times.
EDIT: last csc being TPA doesn't matter
Presterin said:
It should change to INS/INS/TPA. People commenting should understand that F/FD doesn't matter, as the software is the same. It's discussed here MANY times.
EDIT: last csc being TPA doesn't matter
Click to expand...
Click to collapse
Please check your back panel of your phone. The model no. Is written over there. If you want to update your phone to latest firmware its so easy. Find your model no. Is F/ FD download any firmware of any region you like and flash through Odin. Flash all 4 files with home csc.
I think your main issue is latest firmware not csc because your phone is Sim unlocked. You can use any sim card of any country in your phone.

Categories

Resources