Hello all,
I've had my Nexus 10 since Christmas and it's never given me any problems. Within the last 3 or 4 days, however, I noticed my videos weren't loading like normal, so I've been running speedtests and it is completely inconsistent. My phone and computer will consistently pull 20+ Mbps, but the N10 is crazy. Sometimes it's 3Mbps, sometimes it's 10Mbps, sometimes it's 16Mbps. Every time I check, it's different. I've used multiple programs and websites to read the speeds, and they're all reporting the same. I can stand in another room, or right next to the router, same story. The wifi never fully drops, it just slows way down. I don't have a case on it. I've turned on and off the Wi-Fi optimization in settings. I've turned on and off location settings. Nothing helps! Please let me know if you have any ideas. I am hoping I won't have to return the darn thing, it seems crazy.
As per my internet, it's Comcast, Surfboard modem with a Linksys E1000 (Wireless-N, 2.4GHz) using WPA. Restarting that did not help. I am open to the idea of changing some settings on the router however, if that might be a solution. Also, signal strength on the N10 says "Excellent" and link speed says 130Mbps.
Thanks for your help!
muchnginawkt
I too have this problem so now Im going to attempt to root the device
Glad to hear someone else is having similar problems.
Possible good news: I changed my protection from WPA(mixed) to WPA2, and so far things seem to be much more consistent. This may just be a fluke, but it's looking much better so far.
If you have a router with 2.4GHz band only, try changing it to 2.4GHz under WiFi settings on the Nexus.
I had some disconnection problems due to that and somewhat inconsistent speeds, I've seen it fix a lot of peoples problems, I've yet to have a transfer problem so far with limiting WiFi to the speed of my router.
Other issues some see is using N wide or dual channel (40Mhz). As the N10 only supports 20 Mhz in 2.4GHz it seems to get confused.
Most other devices either support 40GHz or handle switching more gracefully.
In short force router to 20 Mhz/single channel, may report more consistent behaviour.
On 5Ghz it does not matter as the N10 supports 40Mhz/Dual channel.
Odd, I know.
My experience is that sometimes with wifi issues, wiping the cache (if custom recovery is available) would resolve the issues for some time, but it might be due to an beta ROM.
P.S> on 5GHz wifi I am able to hit 122Mb/s
it has WIFI, mine hardly works
After a few hours of testing, I am now consistently getting 20mbps + as I should be. My router is set to 20MHz only, but I think the main issue was the security settings. It just wasn't dealing with WPA(mixed) well.
Every time i connect nexus 4 to my home wi-fi. Every other device gets terrible connection speed... Before nexus 4 my Nexus 7 had steady speeds up to 20mbps. With nexus 4 connected speeds go down to 5-3 mbps and even when i disconnect n4 from my home wi-fi router still acts really strange and i have to reboot it. Anybody experienced anything like that?
skyrocket727 said:
Every time i connect nexus 4 to my home wi-fi. Every other device gets terrible connection speed... Before nexus 4 my Nexus 7 had steady speeds up to 20mbps. With nexus 4 connected speeds go down to 5-3 mbps and even when i disconnect n4 from my home wi-fi router still acts really strange and i have to reboot it. Anybody experienced anything like that?
Click to expand...
Click to collapse
I have three desktop computers, an iPad, an iPod, a Roku unit, and two smartphones sharing the same wifi signal. My speeds don't seem to vary any regardless of the number of devices sharing it at any given time. I would have to call my service provider if I found myself in your situation.
Buddy3927 said:
I have three desktop computers, an iPad, an iPod, a Roku unit, and two smartphones sharing the same wifi signal. My speeds don't seem to vary any regardless of the number of devices sharing it at any given time. I would have to call my service provider if I found myself in your situation.
Click to expand...
Click to collapse
Yep, same.
To the op, I'd say either reboot the router (which you probably have done) and / or see if there's a firmware update for the router.
If no cure, call your internet provider.
Ok.. Forgot to mentioned that n4 also loses wifi connection from time to time.
Seems like im not the only one.. People post similar problems.
https://code.google.com/p/android/issues/detail?id=40065
my nexus has never dropped wifi connection to any router you may have hardware issues..
skyrocket727 said:
Ok.. Forgot to mentioned that n4 also loses wifi connection from time to time.
Seems like im not the only one.. People post similar problems.
https://code.google.com/p/android/issues/detail?id=40065
Click to expand...
Click to collapse
I have seen this before. It happens in mixed networks (old B laptop used to crash the WiFi AP when G clients were also connected).
1) Check for a firmware update to your router. This is most likely where your issue is. The router speed should drop and increase as needed, but buggy firmware may only keep in last slowest speed until a reboot.
2) Mixed encryption (WPA & WPA2) is a nightmare Force "WPA2 only with AES only" -or- "WPA only with TKIP only". Some clients may try to use WPA with AES and this was what was crashing my AP at the time.
3) If you still have issues, try using "G&N" only, or even force G only. Some older G clients don't hear N traffic, so they just transmit on top of it.
4) Last resort, look for a used router that can run DD-WRT firmware. Personally, I will never go back to OEM router firmware.
Hope this helps...
i used Wi-Fi Analyzer and it showed 2 really strong signals on the same channel.. one being mine and the other someone's else. i manually changed it from 11 to channel 5 and everything back to normal/// 20mbps just like before!
skyrocket727 said:
i used Wi-Fi Analyzer and it showed 2 really strong signals on the same channel.. one being mine and the other someone's else. i manually changed it from 11 to channel 5 and everything back to normal/// 20mbps just like before!
Click to expand...
Click to collapse
Guess your neighbour will be pleased too !:laugh:
Hi every one. I just got my N4 last week and i experiense the exact same thing!!!!
this is realy bad because every time i use the wireless network every body in the house starts complaining because my N4 shuts down all connections here.
It works alright with the main router wich is a thomson. but it fails with the other two routers (that are Belkin - N) that are only access points!
I realy want this fixed because not having internet at home is quite bad!
First time poster here. I've searched all the threads and couldn't find anything on my specific issue.
Had the Nexus 10 for about a week and noticed streaming YouTube and movies was EXTREMELY slow. Slower than my Galaxy Nexus on the same WiFi network (my network speed is about 18-20 Mbps). I finally did a speed test and noticed that my 10 was getting awful results...sometimes 3-6 Mbps while sometimes it'd get up to 10-13. My Galaxy Nexus gets between 14-18 Mbps consistently. For my 10, every speed test fluctuates between 3 to 13 and it's just so inconsistent.
Now, I don't have any connectivity issues. It never drops the signal and I'm always connected, it just goes super slow to the point of YouTube videos not loading.
I'm not a wizz, but I use ATT uverse and use the router they give you. I'm not sure if it's a router issue or a Nexus issue.
I've restarted the nexus, turned off the WiFi optimization and turned the WiFi off and on. I had a ton of issues with my nexus 7 (main reason I switched to 10) and I really don't want to ship the device back to Google. Any suggestions??
boweman55 said:
First time poster here. I've searched all the threads and couldn't find anything on my specific issue.
Had the Nexus 10 for about a week and noticed streaming YouTube and movies was EXTREMELY slow. Slower than my Galaxy Nexus on the same WiFi network (my network speed is about 18-20 Mbps). I finally did a speed test and noticed that my 10 was getting awful results...sometimes 3-6 Mbps while sometimes it'd get up to 10-13. My Galaxy Nexus gets between 14-18 Mbps consistently. For my 10, every speed test fluctuates between 3 to 13 and it's just so inconsistent.
Now, I don't have any connectivity issues. It never drops the signal and I'm always connected, it just goes super slow to the point of YouTube videos not loading.
I'm not a wizz, but I use ATT uverse and use the router they give you. I'm not sure if it's a router issue or a Nexus issue.
I've restarted the nexus, turned off the WiFi optimization and turned the WiFi off and on. I had a ton of issues with my nexus 7 (main reason I switched to 10) and I really don't want to ship the device back to Google. Any suggestions??
Click to expand...
Click to collapse
For starters when you toggle WiFi optimization you need to reboot for the setting to completely turn on/off.
What ROM / Kernel combo are you using? If that is stock then it is likely the router.
ISP routers are usually cheap, they don't handle multiple device traffic very well. One thing you can do is change the stock/auto settings they come with as they are less than desirable. Lower channels/and or Auto Channel (in both 2.4 and 5 GHz), QoS, software static IP, and even Google DNS can all interfere with your router. First go into build.prop and look for the 8.8.8.8 and 8.8.4.4 lines and delete them, reboot. Try that. If issues persist go into router firmware and change all the Auto settings to a preset. Even something as simple as your phone logged on at the same time could interfere if the channel is saturated. Take everything off the WiFi except for the n10 and try that. Getting a 3rd party router with dual band / 802.11n support is ideal.
The least likely issue is that it could be a hardware issue with your n10.
Does anyone notice there's a big bug with WiFi on the G2?
I have 2 WiFi ac routers, one at home and one at the Office, an Asus RT-ac66U and a Linksys ea6700. Both capable of 1750mbps max speeds.
Internet speeds are 120/6 and 200/20.
Scenario is exactly the same for both routers;
When fresh reboot the router, G2 connects at a speed of 433Mbps.
Speedtests show results of 119/6 at home and 190/20 at the office.
Great you would say!
But here goes. Once WiFi get disconnected and reconnected, speeds go down to ~40mbps. No matter what I do!
These are N speeds, not AC
When looking at connection settings it still shows a link of 433mbps
Tested dozens of times, on both routers, so it has to be an issue with the G2.
Anyone else noticed the same??
DAMN, should have been in Q&A, mods plz move
I'm not an expert on wi-fi, but have stumbled through setting up several routers around the house. But I do not have an ac router.
Is the home router in mixed mode? Ignoring a/b/c for a moment and focusing on g and n (and implying ac), I have two wireless routers in the house. One runs N only (but both 2.4 ghz and 5 ghz) and the other runs G only. Now, my N router is capable of running in mixed mode (to handle both N and G) BUT in mixed mode, my max speed when connected in N is lower than it would be if I ran in dedicated N mode.
Most of my devices now are at least N (2.4 or 5) but I have an older printer and wii that only do G. But as mentioned above, rather than run my best router in mixed mode, I run 2 separate routers, one in N only and one in G only.
Maybe something similar might help with your ac speeds?
Really appreciate your input!
But I already tried settings like AC only etc. Doesn't make any difference.
Once connected for the second time and up to the router no more AC speeds...
Sent from my LG-D802 using XDA Premium 4 mobile app
Is there a way to test LAN speeds on Android? I have the same Asus router but my wan speeds are so pitiful that I wouldn't be able to tell if the phone was dropping to N speeds. If I could test speeds to my desktop across the local network I might be able to test what you are experiencing.
Sent from my VS980 4G using Tapatalk
Is there a way to check on the phone, which band it's connecting to? I haven't found anything.
I have the same router and my issue is on reconnect. I leave my wifi on all the time. When I get home, it connects automatically the moment I pull up to the house. The problem is, the speed is severely crippled. Range is awesome, speed is bad. I have to cycle the wifi and reconnect. Once done, no more problems.
One thing I should note, I was having the same issue occasionally on my Droid RAZR after getting the ASUS. Does anyone know if they use the same wifi hardware? Maybe it's an issue with the router itself?
jasonsf said:
Is there a way to test LAN speeds on Android? I have the same Asus router but my wan speeds are so pitiful that I wouldn't be able to tell if the phone was dropping to N speeds. If I could test speeds to my desktop across the local network I might be able to test what you are experiencing.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
crashN2u said:
Is there a way to check on the phone, which band it's connecting to? I haven't found anything.
I have the same router and my issue is on reconnect. I leave my wifi on all the time. When I get home, it connects automatically the moment I pull up to the house. The problem is, the speed is severely crippled. Range is awesome, speed is bad. I have to cycle the wifi and reconnect. Once done, no more problems.
One thing I should note, I was having the same issue occasionally on my Droid RAZR after getting the ASUS. Does anyone know if they use the same wifi hardware? Maybe it's an issue with the router itself?
Click to expand...
Click to collapse
@jasonff
Don't know about an app to test lan speeds unfortunately.
Think a google search would come up with lots of options.
@crashN2u
I leave my wifi on too all the time for now, it keeps it at full speed then.
There's no way to check which band you are connected to.
Router doesn't have an option to choose AC Only, only N +AC
And in the mean time I have tested it with 4 AC routers, Asus RT-AC66U, Netgear R6250, Linksys EA6700, D-Link 868L.
With all routers exactly the same conclusion. First time everything is great. Excellent speeds. If you never turn off WiFi it remains at high speed.
But once you turn off WiFi on the Phone and turn it back on it immediately drops to ~36-40mbps max (N Speeds).
This remains until I rebooted each router and after that full speeds again.
It must be something in drivers LG used.
There's the solution to for, I'm sure of it by now.
Well, I can see I won't be much help -- especially since the same result on 4 routers!
I am not sure if the following app supports AC, but a very helpful and free app I use is called "Wifi Analyzer". I can't post links but that is the exact name (author = farproc).
It has many useful tools/functions that you may find helpful, switchable between 2.4 and 5.0 ghz, channel scanner, etc.
Does your 2.4 ghz N and 5.0 ghz N/AC have different SSID's? From what I read, AC is 5 ghz only and N can be either 2.4 ghz or 5.0 ghz. I wonder if you are dropping from 5.0 AC to 2.4 N because the 2.4 N is being detected as "stronger signal" than the 5.0 AC at reconnect time?
I named my 2.4 ghz N SSID as "Blah" and 5.0 ghz N SSID as "Blah_5ghz" just so I know what frequency I'm on at a glance (using a widget that shows the SSID) but many routers by default will have both SSID's the same, making it less obvious what band you are connected to. I also use an app called "WIFI Prioritizer" (author Robert Botha), which will allow me to connect or re-connect in the SSID order I specify: i.e. when I get home I will connect to SSID "Blah" (2.4 ghz N because it has the longest range). Every 5 mins (you can specify), it checks to see if my SSID "Blah_5Ghz" is in range and will switch to it if it is (you can also set signal strength connect and disconnect thresholds).
Anyways, I probably can't help further but am following this thread with interest. Good luck!
Klotar said:
Well, I can see I won't be much help -- especially since the same result on 4 routers!
I am not sure if the following app supports AC, but a very helpful and free app I use is called "Wifi Analyzer". I can't post links but that is the exact name (author = farproc).
It has many useful tools/functions that you may find helpful, switchable between 2.4 and 5.0 ghz, channel scanner, etc.
Does your 2.4 ghz N and 5.0 ghz N/AC have different SSID's? From what I read, AC is 5 ghz only and N can be either 2.4 ghz or 5.0 ghz. I wonder if you are dropping from 5.0 AC to 2.4 N because the 2.4 N is being detected as "stronger signal" than the 5.0 AC at reconnect time?
I named my 2.4 ghz N SSID as "Blah" and 5.0 ghz N SSID as "Blah_5ghz" just so I know what frequency I'm on at a glance (using a widget that shows the SSID) but many routers by default will have both SSID's the same, making it less obvious what band you are connected to. I also use an app called "WIFI Prioritizer" (author Robert Botha), which will allow me to connect or re-connect in the SSID order I specify: i.e. when I get home I will connect to SSID "Blah" (2.4 ghz N because it has the longest range). Every 5 mins (you can specify), it checks to see if my SSID "Blah_5Ghz" is in range and will switch to it if it is (you can also set signal strength connect and disconnect thresholds).
Anyways, I probably can't help further but am following this thread with interest. Good luck!
Click to expand...
Click to collapse
My Phone is packed with tools like Wifi Analyser, InSISDer etc etc atm
I always separate 2.4 and 5ghz networks to be able to see exactly what's going on but thanks for the heads up :good:
From further investigation and thinking, and with your suggestion about stronger signals;
Thing is, AC routers are more or less all simultanious routers.
That combines 2.4 and 5ghz signals for higher transfer speeds.
I think in there lies the problem when drivers are not 100%.
In theory 2.4 signals are stronger then 5ghz signals and have wider range.
But in testing I made sure that I was in the same room and no more than 2 meters away from the router.
when testing it showed equal signal strength up to -20 so really strong signals.
Therefore I concluded that N on 2.4 whas equally strong as 5ghz and then again I isolated 5ghz SSID so that's not it unfortunately.
I promised to stay away but I can't resist!
Have you tried some of the more generic troubleshooting tips (on the home network), such as trying with no security or lesser security (WEP) to see if it still reconnects at the lower (N) speeds? I realize that usually that test is of course for a more basic issue than yours but maybe the G2 has trouble handling security overhead.
Some devices and routers just don't like each other (as many know), but 4 different routers...?! Gotta be the G2 side, as you've surmised. Wish I knew someone with an ac router so I could test myself. I'm debating on getting an ac router but you've got me spooked! (kidding/teasing)
Well haven't tried lower or no security.
When I have the chance (aka the wife is away and not *****ing about wifi not available ) I'll sure try that.
But I don't think that WEP will be an option because AC requires AES protection if I'm not mistaken.
But really do not be afraid to get yourself an AC router hehe.
No honestly, I've tested 4 routers with:
AC Capable:
HTC One. Goes all the way to max isp speeds. All the time, no issues
LG G2.
Not AC Capable.
IPhone 5. Max speed at 5ghz (constantly tested) is ~90-100mpbs.
HTC One X. Max speed at 5ghz (constantly tested) is ~70-90mpbs.
So even if your hardware maybe not be capable of AC speeds you still get excellent connections
Oh and for the record.
Here's my personal listing of the hardware I've tested. From best to well not so good.
1. Netgear R6250.
Excellent constant speeds. No drops whatsoever with around 6 devices connected. Excellent range!
2. Asus RT-AC66U
Shame Asus introduced a new wifi driver some time ago which doesn't perform that well. Constant speed drops.
They know about it but thusfar no solution.
When you get this one, stay on old firmware for now!
3. D-link 868L
Real looker this one. Can be put in plain sight in the room like a picture frame :silly:
Great constant speeds, but some drops here and there.
Excellent range.
4. Linksys EA6700
Linksys is sold to Belkin by Cisco.
Up to now I have never seen anything good coming from Belkin!
What a piece of crap.
With a really thin wall between router and phones coverage went down more dan half. Hell even when distance less than 2 meters away coverage was about -45.
Do not get this crap!
I wonder... the wireless N spec (not sure if also AC) calls for devices and routers to have a 'low power mode', which may or may not be enabled in routers and/or phones (e.g. GS3) by default. According to some article I read, newer routers may go into a power saving mode if it detects low traffic and supposedly ramp up when the traffic increases.
Possibly it doesn't ramp up fast enough when a new device connects and the device mistakes it for not having the highest speed (AC) capability. Might explain fast speeds after router bootup but not later. If there is any truth to that (no clue here), it might speed itself up either by testing with a larger file or seeing if the "2nd connect" condition changes while say, streaming videos from the PC to the Xbox or watching Netflix on the main TV. Certainly, either would be considered high traffic and if there is no change to the 2nd connect, well -- there goes that idea.
Is there a wifi power saving mode on the G2 like there is on the GS3? (i.e. dialing *#0011# to turn it off).
Klotar said:
I wonder... the wireless N spec (not sure if also AC) calls for devices and routers to have a 'low power mode', which may or may not be enabled in routers and/or phones (e.g. GS3) by default. According to some article I read, newer routers may go into a power saving mode if it detects low traffic and supposedly ramp up when the traffic increases.
Possibly it doesn't ramp up fast enough when a new device connects and the device mistakes it for not having the highest speed (AC) capability. Might explain fast speeds after router bootup but not later. If there is any truth to that (no clue here), it might speed itself up either by testing with a larger file or seeing if the "2nd connect" condition changes while say, streaming videos from the PC to the Xbox or watching Netflix on the main TV. Certainly, either would be considered high traffic and if there is no change to the 2nd connect, well -- there goes that idea.
Is there a wifi power saving mode on the G2 like there is on the GS3? (i.e. dialing *#0011# to turn it off).
Click to expand...
Click to collapse
Good point!
Well, there is a setting in wifi, advanced to minimize use of wifi when screen is off. Sounds like a power save mode to me.
But, just tested it and that makes no difference.
With that setting deactivated on the G2 still at first boot AC speeds and when I switch off and on wifi I still get N speeds max.
And besides that, on the Asus router there's a setting called "Enable WMM APSD". Which stands for "Automatic Power Save Delivery".
I read up on that and the custom firmware guru RMerlin writes about that setting that especially Android devices could suffer from that setting.
So I disabled that a long time ago.
On other routers I couldn't find such setting.
But to iron that setting out I just tested it once more.
First with setting off. Still first connect AC speeds, after turn off/on back to N speed.
Then turned wifi off, enabled the setting and rebooted the router.
But this time to let the supposedly power save kick in I let my Phone idle for 15 minutes so that it surely was in deep sleep.
Then turned screen on, and again AC speeds when first connected.
After that turned wifi off, screen of for 15 minutes. Turned screen on again and once more N speed.
And link speed is always shown as 433mbps btw, which is correct.
There's just some bug in driver code by LG which doesn't work correctly.
I'm more and more convinced of that.
For now I just keep wifi on all the time so that I always get full speeds.
Batt is capable enough so no problem there
LittleH79 said:
Good point!
Well, there is a setting in wifi, advanced to minimize use of wifi when screen is off. Sounds like a power save mode to me.
But, just tested it and that makes no difference.
With that setting deactivated on the G2 still at first boot AC speeds and when I switch off and on wifi I still get N speeds max.
And besides that, on the Asus router there's a setting called "Enable WMM APSD". Which stands for "Automatic Power Save Delivery".
I read up on that and the custom firmware guru RMerlin writes about that setting that especially Android devices could suffer from that setting.
So I disabled that a long time ago.
On other routers I couldn't find such setting.
But to iron that setting out I just tested it once more.
First with setting off. Still first connect AC speeds, after turn off/on back to N speed.
Then turned wifi off, enabled the setting and rebooted the router.
But this time to let the supposedly power save kick in I let my Phone idle for 15 minutes so that it surely was in deep sleep.
Then turned screen on, and again AC speeds when first connected.
After that turned wifi off, screen of for 15 minutes. Turned screen on again and once more N speed.
And link speed is always shown as 433mbps btw, which is correct.
There's just some bug in driver code by LG which doesn't work correctly.
I'm more and more convinced of that.
For now I just keep wifi on all the time so that I always get full speeds.
Batt is capable enough so no problem there
Click to expand...
Click to collapse
I found a tool to test local network speed. It uses two android devices for a p2p test or you can install a server program on your PC. I'll do some testing and see if I can reproduce what you are seeing. Here's the link: http://pzoleeblogen.wordpress.com/2013/08/12/local-network-speed-test-for-android/ and the market link: https://play.google.com/store/apps/details?id=com.pzolee.android.localwifispeedtester&hl=en
And to be sure I understand, you boot your phone with wifi on, AC speeds. Turn off wifi on phone and turn it back on, N speeds. Reboot phone with wifi on, back to AC speeds. Correct?
jasonsf said:
I found a tool to test local network speed. It uses two android devices for a p2p test or you can install a server program on your PC. I'll do some testing and see if I can reproduce what you are seeing. Here's the link: http://pzoleeblogen.wordpress.com/2013/08/12/local-network-speed-test-for-android/ and the market link: https://play.google.com/store/apps/details?id=com.pzolee.android.localwifispeedtester&hl=en
And to be sure I understand, you boot your phone with wifi on, AC speeds. Turn off wifi on phone and turn it back on, N speeds. Reboot phone with wifi on, back to AC speeds. Correct?
Click to expand...
Click to collapse
Thanks for the app!
Gonna test this for sure since I also have a HTC One lying around which is also AC capable
Not 100% corect.
I can do with phone what I want until wifi gets turned off.
Then a reboot of the router is required to get AC speed back.
No need to reboot the phone.
Quite busy atm so don't have enough time I would like to be testing
LittleH79 said:
Thanks for the app!
Gonna test this for sure since I also have a HTC One lying around which is also AC capable
Not 100% corect.
I can do with phone what I want until wifi gets turned off.
Then a reboot of the router is required to get AC speed back.
No need to reboot the phone.
Quite busy atm so don't have enough time I would like to be testing
Click to expand...
Click to collapse
Between my wife on her laptop, my son on his Chromebook and my daughter streaming Netflix on our Roku, I hardly ever have a chance to reboot the router without someone complaining
Since I haven't rebooted my router in days, from what you are saying I shouldn't see anything above N speeds until I reboot the router. Do you actually have to turn off wifi on the phone to have it drop from AC to N or is it enough to leave the range of the wifi and then come back? And does if turning it off is required, do I have to be connected to the router at the time I turn phone wifi off?
I'll try testing this weekend.
jasonsf said:
Between my wife on her laptop, my son on his Chromebook and my daughter streaming Netflix on our Roku, I hardly ever have a chance to reboot the router without someone complaining
Since I haven't rebooted my router in days, from what you are saying I shouldn't see anything above N speeds until I reboot the router. Do you actually have to turn off wifi on the phone to have it drop from AC to N or is it enough to leave the range of the wifi and then come back? And does if turning it off is required, do I have to be connected to the router at the time I turn phone wifi off?
I'll try testing this weekend.
Click to expand...
Click to collapse
Going out of range isn't a problem as long as you don't have an app or setting on in wifi, advanced to switch off wifi.
As long as wifi isn't turned off I can go everywhere, in&out of range, other routers connect but speeds remain AC, everywhere on every router.
I can reproduce everytime that when I turn off wifi on the phone and back on from then on I only get ~36-40mbps max.
It's like the phone thinks that's max capable speed altough wifi link speed is again shown as 433mbps.
If I have switched off wifi on the phone and back on, on all 4 AC routers I tested all needed a router reboot to gain full AC speeds again.
Oh and maybe a small tip, I always say to the misses at home that there's a small problem with connection so a quick reboot is required.
Up to now that still works
LittleH79 said:
Going out of range isn't a problem as long as you don't have an app or setting on in wifi, advanced to switch off wifi.
As long as wifi isn't turned off I can go everywhere, in&out of range, other routers connect but speeds remain AC, everywhere on every router.
I can reproduce everytime that when I turn off wifi on the phone and back on from then on I only get ~36-40mbps max.
It's like the phone thinks that's max capable speed altough wifi link speed is again shown as 433mbps.
If I have switched off wifi on the phone and back on, on all 4 AC routers I tested all needed a router reboot to gain full AC speeds again.
Oh and maybe a small tip, I always say to the misses at home that there's a small problem with connection so a quick reboot is required.
Up to now that still works
Click to expand...
Click to collapse
I just did a few tests from my phone to my pc with 100MB data sets. I got between 200 and 260 Mbit/s down both before and after toggling my phone's wifi off and on. Didn't seem to make a difference. I got about 6Mbit up.
So, I didn't seem to experience the problem you have. But try repeating what I've done with this local network app. Maybe you won't have the issue with it that you are seeing on your WAN connection.
jasonsf said:
I just did a few tests from my phone to my pc with 100MB data sets. I got between 200 and 260 Mbit/s down both before and after toggling my phone's wifi off and on. Didn't seem to make a difference. I got about 6Mbit up.
So, I didn't seem to experience the problem you have. But try repeating what I've done with this local network app. Maybe you won't have the issue with it that you are seeing on your WAN connection.
Click to expand...
Click to collapse
What router or AP do you use?
/s
shaglord said:
What router or AP do you use?
Click to expand...
Click to collapse
Asus RT-AC66U
jasonsf said:
Asus RT-AC66U
Click to expand...
Click to collapse
Wow and do you really see real transfer rates of 25-30 MB/s to your G2?
I'm using a Qualcomm Atheros based AC-router and my G2 (running latest CM11) hardly goes over 10 Mbit ~ 1,5 MB/s. Weak I know. (Confirmed 433 Mbit link using a wifi app.)
Maybe I need a broadcom-router like yours to see some real AC-speeds.
Thanks for the reply. Take care
/s
Hi,
I have realized that my wifi connection drops down from more than 20 to only 1 Mbps with my lg g2. It happens with 2 routers and seems that if I reconnect the phone then I go back to more than 20 (and short later in goes down again). Any idea what can be?
No suggestions on this one? I tried the location services changes with no success. I would say it is some app causing issues, but no idea which one could be...
ferjilo said:
Hi,
I have realized that my wifi connection drops down from more than 20 to only 1 Mbps with my lg g2. It happens with 2 routers and seems that if I reconnect the phone then I go back to more than 20 (and short later in goes down again). Any idea what can be?
Click to expand...
Click to collapse
got exactly the same problem
switching wifi off an on solves the problem for 2 minutes or so. then it drops to 1mbps again. tried different routers.
I figured out that it only concerns internet traffic. LAN traffic remains at full speed.
WHO can help please? :cyclops:
hmmm. wonder if this is the same problem a lot nexus 5 owners have including me.. there's quite a big thread on it in n5 QA section
there's no fix but workaround solutions include running in 2g mode or turning off data when on WiFi and even making a script to do so automatically when entering WiFi areas.
http://forum.xda-developers.com/google-nexus-5/help/slow-wifi-n5-t2514501
thank you for that interesting link.
unfortunately the solution turning mobile data off didn't worked for me.
I also tried static IP instead of DHCP - no success.
one strange thing, as already mentioned: LAN traffic to my computer works perfectly with max speed. (copying files e.g.)
so, wifi works in principle. It's about internet traffic only.
but which kind of software/hardware is able to distinguish between internet- and local traffic?