First time poster here. I've searched all the threads and couldn't find anything on my specific issue.
Had the Nexus 10 for about a week and noticed streaming YouTube and movies was EXTREMELY slow. Slower than my Galaxy Nexus on the same WiFi network (my network speed is about 18-20 Mbps). I finally did a speed test and noticed that my 10 was getting awful results...sometimes 3-6 Mbps while sometimes it'd get up to 10-13. My Galaxy Nexus gets between 14-18 Mbps consistently. For my 10, every speed test fluctuates between 3 to 13 and it's just so inconsistent.
Now, I don't have any connectivity issues. It never drops the signal and I'm always connected, it just goes super slow to the point of YouTube videos not loading.
I'm not a wizz, but I use ATT uverse and use the router they give you. I'm not sure if it's a router issue or a Nexus issue.
I've restarted the nexus, turned off the WiFi optimization and turned the WiFi off and on. I had a ton of issues with my nexus 7 (main reason I switched to 10) and I really don't want to ship the device back to Google. Any suggestions??
boweman55 said:
First time poster here. I've searched all the threads and couldn't find anything on my specific issue.
Had the Nexus 10 for about a week and noticed streaming YouTube and movies was EXTREMELY slow. Slower than my Galaxy Nexus on the same WiFi network (my network speed is about 18-20 Mbps). I finally did a speed test and noticed that my 10 was getting awful results...sometimes 3-6 Mbps while sometimes it'd get up to 10-13. My Galaxy Nexus gets between 14-18 Mbps consistently. For my 10, every speed test fluctuates between 3 to 13 and it's just so inconsistent.
Now, I don't have any connectivity issues. It never drops the signal and I'm always connected, it just goes super slow to the point of YouTube videos not loading.
I'm not a wizz, but I use ATT uverse and use the router they give you. I'm not sure if it's a router issue or a Nexus issue.
I've restarted the nexus, turned off the WiFi optimization and turned the WiFi off and on. I had a ton of issues with my nexus 7 (main reason I switched to 10) and I really don't want to ship the device back to Google. Any suggestions??
Click to expand...
Click to collapse
For starters when you toggle WiFi optimization you need to reboot for the setting to completely turn on/off.
What ROM / Kernel combo are you using? If that is stock then it is likely the router.
ISP routers are usually cheap, they don't handle multiple device traffic very well. One thing you can do is change the stock/auto settings they come with as they are less than desirable. Lower channels/and or Auto Channel (in both 2.4 and 5 GHz), QoS, software static IP, and even Google DNS can all interfere with your router. First go into build.prop and look for the 8.8.8.8 and 8.8.4.4 lines and delete them, reboot. Try that. If issues persist go into router firmware and change all the Auto settings to a preset. Even something as simple as your phone logged on at the same time could interfere if the channel is saturated. Take everything off the WiFi except for the n10 and try that. Getting a 3rd party router with dual band / 802.11n support is ideal.
The least likely issue is that it could be a hardware issue with your n10.
I'm really happy with the phone so far, but my wifi disconnects fairly regularly and I keep getting a force close on the SMCC Process (whatever that is). Anyone else having problems?
I just read the thread below this and that issue seems similar.
EDIT: I tried turning off the smart wifi, but it still loses connection. The phone still shows that it's connected to whatever wifi signal, but stops downloading. This happens both at home and at work, so I don't believe it's related to the router itself.
I'm seeing the same issue on mine as well. Noticed it last night playing Pandora via wifi. Would play like 3 songs then nothing. I would have to toggle wifi on/off to get Pandora playing again.
jfugate15 said:
I'm seeing the same issue on mine as well. Noticed it last night playing Pandora via wifi. Would play like 3 songs then nothing. I would have to toggle wifi on/off to get Pandora playing again.
Click to expand...
Click to collapse
Sounds like basically the same thing. If I wait long enough, it comes back on its own, but it's faster to just cycle wifi or airplane mode once. It's fairly frustrating, and I even found myself just using 3G to do things last night instead of Wifi.
seems to be a known issue in other S4 forums:
http://forum.xda-developers.com/showthread.php?t=2254568&page=2
Mixed Mode WIFI
I had this exact same problem with my EVO 4G LTE, the problem was the mixed mode WIFI. (B,G,N). On the EVO it turned out to be an easy fix because there was a setting in the WIFI menu to force either B or G. As soon as I selected one mode I had a solid internet connection. The problem here is there does not seem to be an option in the S4 settings to allow this. I have been trying to force single mode on my router to see if that will fix it but my router will not allow me to turn it off either. Pretty serious bug I would say.
WIFI worthless on brand new S4
If you are having issues with this you might want to check this thread out!!
http://forum.xda-developers.com/showthread.php?t=2253471&page=3
it doesn't do it as often as it did with the SGS3 though
I really wish I could find a resolution to this. I'm thinking of wiping my phone and starting over to make sure it isn't an app issue, but man that's a lot of work.
Im having the same issue as well.. Im almost positive its common issue and i would expect it to be addressed in the next OTA
The common link seems to be DLink router. We have a Cisco Linksys router and it stays hooked up solid on that.
I have an Asus router. Don't know if there are usually problems with those or not, but I haven't had any prior issues.
I have a Cisco e4200 stock and a Asus running ddwrt operating as a wireless bridge to extend my network. I had to turn off mixed mode on both devices to resolve the issue. Hope that helps.
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
I have the same problem but I have Netgear routers. The one at my house works fine, but at my other location. The wifi drops.
Same problem on dlink
Adding my 2 cents because I have 2 S4's that I've been testing with and I'm getting mixed results... my first post here so I hope I'm doing this right!
I have 2 wireless routers at home:
- DLink DIR-655
- One provided by my ISP (Bell Canada; not sure of the model at the moment)
The DIR-655 is troublesome for BOTH S4 devices; they stay connected for a few minutes (or longer in some cases) but will always end up not transferring data even though they show as having a very strong signal. Turning wifi on/off always fixes the issue for a short period of time.
Knowing that there seem to be compatibility issues with the S4 and DLink router, I switched them both over to the Bell router. Now only one of the devices has the wifi issue described above.
I found it odd that changing the router being used fixed the issue for one of the devices but not the other. I'm now questioning whether one device has a hardware issue or not (doubtful on this, but worth questioning).
Both S4's have the most up-to-date firmware as do all of the routers in the house. No other devices (iPhones, laptops, apple tv, etc...) have any issues with the wifi.
I've tried resetting the routers, forgetting the wifi connection and setting it back up, rebooting the phone, smashing my head against the wall; nothing seems to have worked permanently.
Is it possible that this is a hardware issue and not a software issue? Has anyone else had similar results with multiple devices?
fix....?
this wifi drops are due to the router WIFI signal setting. it will drop it you are using a B/G Mixed signal/ B/G/N Mixed signal. i recommend setting it on 802.11 g. or, if all your Devices in the house have N use N since it has more bandwidth. i use G because of the PS3
Hope this helps resolve the issue for you guys, it sure did for me.
Yurijoejoe said:
this wifi drops are due to the router WIFI signal setting. it will drop it you are using a B/G Mixed signal/ B/G/N Mixed signal. i recommend setting it on 802.11 g. or, if all your Devices in the house have N use N since it has more bandwidth. i use G because of the PS3
Hope this helps resolve the issue for you guys, it sure did for me.
Click to expand...
Click to collapse
Thanks for the suggestion, I can attest that this wasn't a permanent solution for me. After switching to N mode only, the amount of times the issue occurred was reduced, but still happens at least once per day.
It's also a pain when I'm connected to networks where I have no control over the wireless settings (work, public networks, friends networks).
I have a linksys modem and router. Haven't had a single connection issue with this phone as I had with my EVO. As my wifi disconnects and reconnects right away. Lol. First time that has happened. Knocked on wood.
Sent from my SPH-L720 using xda app-developers app
I find it disconnects much less often than the sgs3, but still occasionally disconnects
Sent from my SPH-L720 using xda app-developers app
Does anyone notice there's a big bug with WiFi on the G2?
I have 2 WiFi ac routers, one at home and one at the Office, an Asus RT-ac66U and a Linksys ea6700. Both capable of 1750mbps max speeds.
Internet speeds are 120/6 and 200/20.
Scenario is exactly the same for both routers;
When fresh reboot the router, G2 connects at a speed of 433Mbps.
Speedtests show results of 119/6 at home and 190/20 at the office.
Great you would say!
But here goes. Once WiFi get disconnected and reconnected, speeds go down to ~40mbps. No matter what I do!
These are N speeds, not AC
When looking at connection settings it still shows a link of 433mbps
Tested dozens of times, on both routers, so it has to be an issue with the G2.
Anyone else noticed the same??
DAMN, should have been in Q&A, mods plz move
I'm not an expert on wi-fi, but have stumbled through setting up several routers around the house. But I do not have an ac router.
Is the home router in mixed mode? Ignoring a/b/c for a moment and focusing on g and n (and implying ac), I have two wireless routers in the house. One runs N only (but both 2.4 ghz and 5 ghz) and the other runs G only. Now, my N router is capable of running in mixed mode (to handle both N and G) BUT in mixed mode, my max speed when connected in N is lower than it would be if I ran in dedicated N mode.
Most of my devices now are at least N (2.4 or 5) but I have an older printer and wii that only do G. But as mentioned above, rather than run my best router in mixed mode, I run 2 separate routers, one in N only and one in G only.
Maybe something similar might help with your ac speeds?
Really appreciate your input!
But I already tried settings like AC only etc. Doesn't make any difference.
Once connected for the second time and up to the router no more AC speeds...
Sent from my LG-D802 using XDA Premium 4 mobile app
Is there a way to test LAN speeds on Android? I have the same Asus router but my wan speeds are so pitiful that I wouldn't be able to tell if the phone was dropping to N speeds. If I could test speeds to my desktop across the local network I might be able to test what you are experiencing.
Sent from my VS980 4G using Tapatalk
Is there a way to check on the phone, which band it's connecting to? I haven't found anything.
I have the same router and my issue is on reconnect. I leave my wifi on all the time. When I get home, it connects automatically the moment I pull up to the house. The problem is, the speed is severely crippled. Range is awesome, speed is bad. I have to cycle the wifi and reconnect. Once done, no more problems.
One thing I should note, I was having the same issue occasionally on my Droid RAZR after getting the ASUS. Does anyone know if they use the same wifi hardware? Maybe it's an issue with the router itself?
jasonsf said:
Is there a way to test LAN speeds on Android? I have the same Asus router but my wan speeds are so pitiful that I wouldn't be able to tell if the phone was dropping to N speeds. If I could test speeds to my desktop across the local network I might be able to test what you are experiencing.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
crashN2u said:
Is there a way to check on the phone, which band it's connecting to? I haven't found anything.
I have the same router and my issue is on reconnect. I leave my wifi on all the time. When I get home, it connects automatically the moment I pull up to the house. The problem is, the speed is severely crippled. Range is awesome, speed is bad. I have to cycle the wifi and reconnect. Once done, no more problems.
One thing I should note, I was having the same issue occasionally on my Droid RAZR after getting the ASUS. Does anyone know if they use the same wifi hardware? Maybe it's an issue with the router itself?
Click to expand...
Click to collapse
@jasonff
Don't know about an app to test lan speeds unfortunately.
Think a google search would come up with lots of options.
@crashN2u
I leave my wifi on too all the time for now, it keeps it at full speed then.
There's no way to check which band you are connected to.
Router doesn't have an option to choose AC Only, only N +AC
And in the mean time I have tested it with 4 AC routers, Asus RT-AC66U, Netgear R6250, Linksys EA6700, D-Link 868L.
With all routers exactly the same conclusion. First time everything is great. Excellent speeds. If you never turn off WiFi it remains at high speed.
But once you turn off WiFi on the Phone and turn it back on it immediately drops to ~36-40mbps max (N Speeds).
This remains until I rebooted each router and after that full speeds again.
It must be something in drivers LG used.
There's the solution to for, I'm sure of it by now.
Well, I can see I won't be much help -- especially since the same result on 4 routers!
I am not sure if the following app supports AC, but a very helpful and free app I use is called "Wifi Analyzer". I can't post links but that is the exact name (author = farproc).
It has many useful tools/functions that you may find helpful, switchable between 2.4 and 5.0 ghz, channel scanner, etc.
Does your 2.4 ghz N and 5.0 ghz N/AC have different SSID's? From what I read, AC is 5 ghz only and N can be either 2.4 ghz or 5.0 ghz. I wonder if you are dropping from 5.0 AC to 2.4 N because the 2.4 N is being detected as "stronger signal" than the 5.0 AC at reconnect time?
I named my 2.4 ghz N SSID as "Blah" and 5.0 ghz N SSID as "Blah_5ghz" just so I know what frequency I'm on at a glance (using a widget that shows the SSID) but many routers by default will have both SSID's the same, making it less obvious what band you are connected to. I also use an app called "WIFI Prioritizer" (author Robert Botha), which will allow me to connect or re-connect in the SSID order I specify: i.e. when I get home I will connect to SSID "Blah" (2.4 ghz N because it has the longest range). Every 5 mins (you can specify), it checks to see if my SSID "Blah_5Ghz" is in range and will switch to it if it is (you can also set signal strength connect and disconnect thresholds).
Anyways, I probably can't help further but am following this thread with interest. Good luck!
Klotar said:
Well, I can see I won't be much help -- especially since the same result on 4 routers!
I am not sure if the following app supports AC, but a very helpful and free app I use is called "Wifi Analyzer". I can't post links but that is the exact name (author = farproc).
It has many useful tools/functions that you may find helpful, switchable between 2.4 and 5.0 ghz, channel scanner, etc.
Does your 2.4 ghz N and 5.0 ghz N/AC have different SSID's? From what I read, AC is 5 ghz only and N can be either 2.4 ghz or 5.0 ghz. I wonder if you are dropping from 5.0 AC to 2.4 N because the 2.4 N is being detected as "stronger signal" than the 5.0 AC at reconnect time?
I named my 2.4 ghz N SSID as "Blah" and 5.0 ghz N SSID as "Blah_5ghz" just so I know what frequency I'm on at a glance (using a widget that shows the SSID) but many routers by default will have both SSID's the same, making it less obvious what band you are connected to. I also use an app called "WIFI Prioritizer" (author Robert Botha), which will allow me to connect or re-connect in the SSID order I specify: i.e. when I get home I will connect to SSID "Blah" (2.4 ghz N because it has the longest range). Every 5 mins (you can specify), it checks to see if my SSID "Blah_5Ghz" is in range and will switch to it if it is (you can also set signal strength connect and disconnect thresholds).
Anyways, I probably can't help further but am following this thread with interest. Good luck!
Click to expand...
Click to collapse
My Phone is packed with tools like Wifi Analyser, InSISDer etc etc atm
I always separate 2.4 and 5ghz networks to be able to see exactly what's going on but thanks for the heads up :good:
From further investigation and thinking, and with your suggestion about stronger signals;
Thing is, AC routers are more or less all simultanious routers.
That combines 2.4 and 5ghz signals for higher transfer speeds.
I think in there lies the problem when drivers are not 100%.
In theory 2.4 signals are stronger then 5ghz signals and have wider range.
But in testing I made sure that I was in the same room and no more than 2 meters away from the router.
when testing it showed equal signal strength up to -20 so really strong signals.
Therefore I concluded that N on 2.4 whas equally strong as 5ghz and then again I isolated 5ghz SSID so that's not it unfortunately.
I promised to stay away but I can't resist!
Have you tried some of the more generic troubleshooting tips (on the home network), such as trying with no security or lesser security (WEP) to see if it still reconnects at the lower (N) speeds? I realize that usually that test is of course for a more basic issue than yours but maybe the G2 has trouble handling security overhead.
Some devices and routers just don't like each other (as many know), but 4 different routers...?! Gotta be the G2 side, as you've surmised. Wish I knew someone with an ac router so I could test myself. I'm debating on getting an ac router but you've got me spooked! (kidding/teasing)
Well haven't tried lower or no security.
When I have the chance (aka the wife is away and not *****ing about wifi not available ) I'll sure try that.
But I don't think that WEP will be an option because AC requires AES protection if I'm not mistaken.
But really do not be afraid to get yourself an AC router hehe.
No honestly, I've tested 4 routers with:
AC Capable:
HTC One. Goes all the way to max isp speeds. All the time, no issues
LG G2.
Not AC Capable.
IPhone 5. Max speed at 5ghz (constantly tested) is ~90-100mpbs.
HTC One X. Max speed at 5ghz (constantly tested) is ~70-90mpbs.
So even if your hardware maybe not be capable of AC speeds you still get excellent connections
Oh and for the record.
Here's my personal listing of the hardware I've tested. From best to well not so good.
1. Netgear R6250.
Excellent constant speeds. No drops whatsoever with around 6 devices connected. Excellent range!
2. Asus RT-AC66U
Shame Asus introduced a new wifi driver some time ago which doesn't perform that well. Constant speed drops.
They know about it but thusfar no solution.
When you get this one, stay on old firmware for now!
3. D-link 868L
Real looker this one. Can be put in plain sight in the room like a picture frame :silly:
Great constant speeds, but some drops here and there.
Excellent range.
4. Linksys EA6700
Linksys is sold to Belkin by Cisco.
Up to now I have never seen anything good coming from Belkin!
What a piece of crap.
With a really thin wall between router and phones coverage went down more dan half. Hell even when distance less than 2 meters away coverage was about -45.
Do not get this crap!
I wonder... the wireless N spec (not sure if also AC) calls for devices and routers to have a 'low power mode', which may or may not be enabled in routers and/or phones (e.g. GS3) by default. According to some article I read, newer routers may go into a power saving mode if it detects low traffic and supposedly ramp up when the traffic increases.
Possibly it doesn't ramp up fast enough when a new device connects and the device mistakes it for not having the highest speed (AC) capability. Might explain fast speeds after router bootup but not later. If there is any truth to that (no clue here), it might speed itself up either by testing with a larger file or seeing if the "2nd connect" condition changes while say, streaming videos from the PC to the Xbox or watching Netflix on the main TV. Certainly, either would be considered high traffic and if there is no change to the 2nd connect, well -- there goes that idea.
Is there a wifi power saving mode on the G2 like there is on the GS3? (i.e. dialing *#0011# to turn it off).
Klotar said:
I wonder... the wireless N spec (not sure if also AC) calls for devices and routers to have a 'low power mode', which may or may not be enabled in routers and/or phones (e.g. GS3) by default. According to some article I read, newer routers may go into a power saving mode if it detects low traffic and supposedly ramp up when the traffic increases.
Possibly it doesn't ramp up fast enough when a new device connects and the device mistakes it for not having the highest speed (AC) capability. Might explain fast speeds after router bootup but not later. If there is any truth to that (no clue here), it might speed itself up either by testing with a larger file or seeing if the "2nd connect" condition changes while say, streaming videos from the PC to the Xbox or watching Netflix on the main TV. Certainly, either would be considered high traffic and if there is no change to the 2nd connect, well -- there goes that idea.
Is there a wifi power saving mode on the G2 like there is on the GS3? (i.e. dialing *#0011# to turn it off).
Click to expand...
Click to collapse
Good point!
Well, there is a setting in wifi, advanced to minimize use of wifi when screen is off. Sounds like a power save mode to me.
But, just tested it and that makes no difference.
With that setting deactivated on the G2 still at first boot AC speeds and when I switch off and on wifi I still get N speeds max.
And besides that, on the Asus router there's a setting called "Enable WMM APSD". Which stands for "Automatic Power Save Delivery".
I read up on that and the custom firmware guru RMerlin writes about that setting that especially Android devices could suffer from that setting.
So I disabled that a long time ago.
On other routers I couldn't find such setting.
But to iron that setting out I just tested it once more.
First with setting off. Still first connect AC speeds, after turn off/on back to N speed.
Then turned wifi off, enabled the setting and rebooted the router.
But this time to let the supposedly power save kick in I let my Phone idle for 15 minutes so that it surely was in deep sleep.
Then turned screen on, and again AC speeds when first connected.
After that turned wifi off, screen of for 15 minutes. Turned screen on again and once more N speed.
And link speed is always shown as 433mbps btw, which is correct.
There's just some bug in driver code by LG which doesn't work correctly.
I'm more and more convinced of that.
For now I just keep wifi on all the time so that I always get full speeds.
Batt is capable enough so no problem there
LittleH79 said:
Good point!
Well, there is a setting in wifi, advanced to minimize use of wifi when screen is off. Sounds like a power save mode to me.
But, just tested it and that makes no difference.
With that setting deactivated on the G2 still at first boot AC speeds and when I switch off and on wifi I still get N speeds max.
And besides that, on the Asus router there's a setting called "Enable WMM APSD". Which stands for "Automatic Power Save Delivery".
I read up on that and the custom firmware guru RMerlin writes about that setting that especially Android devices could suffer from that setting.
So I disabled that a long time ago.
On other routers I couldn't find such setting.
But to iron that setting out I just tested it once more.
First with setting off. Still first connect AC speeds, after turn off/on back to N speed.
Then turned wifi off, enabled the setting and rebooted the router.
But this time to let the supposedly power save kick in I let my Phone idle for 15 minutes so that it surely was in deep sleep.
Then turned screen on, and again AC speeds when first connected.
After that turned wifi off, screen of for 15 minutes. Turned screen on again and once more N speed.
And link speed is always shown as 433mbps btw, which is correct.
There's just some bug in driver code by LG which doesn't work correctly.
I'm more and more convinced of that.
For now I just keep wifi on all the time so that I always get full speeds.
Batt is capable enough so no problem there
Click to expand...
Click to collapse
I found a tool to test local network speed. It uses two android devices for a p2p test or you can install a server program on your PC. I'll do some testing and see if I can reproduce what you are seeing. Here's the link: http://pzoleeblogen.wordpress.com/2013/08/12/local-network-speed-test-for-android/ and the market link: https://play.google.com/store/apps/details?id=com.pzolee.android.localwifispeedtester&hl=en
And to be sure I understand, you boot your phone with wifi on, AC speeds. Turn off wifi on phone and turn it back on, N speeds. Reboot phone with wifi on, back to AC speeds. Correct?
jasonsf said:
I found a tool to test local network speed. It uses two android devices for a p2p test or you can install a server program on your PC. I'll do some testing and see if I can reproduce what you are seeing. Here's the link: http://pzoleeblogen.wordpress.com/2013/08/12/local-network-speed-test-for-android/ and the market link: https://play.google.com/store/apps/details?id=com.pzolee.android.localwifispeedtester&hl=en
And to be sure I understand, you boot your phone with wifi on, AC speeds. Turn off wifi on phone and turn it back on, N speeds. Reboot phone with wifi on, back to AC speeds. Correct?
Click to expand...
Click to collapse
Thanks for the app!
Gonna test this for sure since I also have a HTC One lying around which is also AC capable
Not 100% corect.
I can do with phone what I want until wifi gets turned off.
Then a reboot of the router is required to get AC speed back.
No need to reboot the phone.
Quite busy atm so don't have enough time I would like to be testing
LittleH79 said:
Thanks for the app!
Gonna test this for sure since I also have a HTC One lying around which is also AC capable
Not 100% corect.
I can do with phone what I want until wifi gets turned off.
Then a reboot of the router is required to get AC speed back.
No need to reboot the phone.
Quite busy atm so don't have enough time I would like to be testing
Click to expand...
Click to collapse
Between my wife on her laptop, my son on his Chromebook and my daughter streaming Netflix on our Roku, I hardly ever have a chance to reboot the router without someone complaining
Since I haven't rebooted my router in days, from what you are saying I shouldn't see anything above N speeds until I reboot the router. Do you actually have to turn off wifi on the phone to have it drop from AC to N or is it enough to leave the range of the wifi and then come back? And does if turning it off is required, do I have to be connected to the router at the time I turn phone wifi off?
I'll try testing this weekend.
jasonsf said:
Between my wife on her laptop, my son on his Chromebook and my daughter streaming Netflix on our Roku, I hardly ever have a chance to reboot the router without someone complaining
Since I haven't rebooted my router in days, from what you are saying I shouldn't see anything above N speeds until I reboot the router. Do you actually have to turn off wifi on the phone to have it drop from AC to N or is it enough to leave the range of the wifi and then come back? And does if turning it off is required, do I have to be connected to the router at the time I turn phone wifi off?
I'll try testing this weekend.
Click to expand...
Click to collapse
Going out of range isn't a problem as long as you don't have an app or setting on in wifi, advanced to switch off wifi.
As long as wifi isn't turned off I can go everywhere, in&out of range, other routers connect but speeds remain AC, everywhere on every router.
I can reproduce everytime that when I turn off wifi on the phone and back on from then on I only get ~36-40mbps max.
It's like the phone thinks that's max capable speed altough wifi link speed is again shown as 433mbps.
If I have switched off wifi on the phone and back on, on all 4 AC routers I tested all needed a router reboot to gain full AC speeds again.
Oh and maybe a small tip, I always say to the misses at home that there's a small problem with connection so a quick reboot is required.
Up to now that still works
LittleH79 said:
Going out of range isn't a problem as long as you don't have an app or setting on in wifi, advanced to switch off wifi.
As long as wifi isn't turned off I can go everywhere, in&out of range, other routers connect but speeds remain AC, everywhere on every router.
I can reproduce everytime that when I turn off wifi on the phone and back on from then on I only get ~36-40mbps max.
It's like the phone thinks that's max capable speed altough wifi link speed is again shown as 433mbps.
If I have switched off wifi on the phone and back on, on all 4 AC routers I tested all needed a router reboot to gain full AC speeds again.
Oh and maybe a small tip, I always say to the misses at home that there's a small problem with connection so a quick reboot is required.
Up to now that still works
Click to expand...
Click to collapse
I just did a few tests from my phone to my pc with 100MB data sets. I got between 200 and 260 Mbit/s down both before and after toggling my phone's wifi off and on. Didn't seem to make a difference. I got about 6Mbit up.
So, I didn't seem to experience the problem you have. But try repeating what I've done with this local network app. Maybe you won't have the issue with it that you are seeing on your WAN connection.
jasonsf said:
I just did a few tests from my phone to my pc with 100MB data sets. I got between 200 and 260 Mbit/s down both before and after toggling my phone's wifi off and on. Didn't seem to make a difference. I got about 6Mbit up.
So, I didn't seem to experience the problem you have. But try repeating what I've done with this local network app. Maybe you won't have the issue with it that you are seeing on your WAN connection.
Click to expand...
Click to collapse
What router or AP do you use?
/s
shaglord said:
What router or AP do you use?
Click to expand...
Click to collapse
Asus RT-AC66U
jasonsf said:
Asus RT-AC66U
Click to expand...
Click to collapse
Wow and do you really see real transfer rates of 25-30 MB/s to your G2?
I'm using a Qualcomm Atheros based AC-router and my G2 (running latest CM11) hardly goes over 10 Mbit ~ 1,5 MB/s. Weak I know. (Confirmed 433 Mbit link using a wifi app.)
Maybe I need a broadcom-router like yours to see some real AC-speeds.
Thanks for the reply. Take care
/s
Hi,
I have realized that my wifi connection drops down from more than 20 to only 1 Mbps with my lg g2. It happens with 2 routers and seems that if I reconnect the phone then I go back to more than 20 (and short later in goes down again). Any idea what can be?
No suggestions on this one? I tried the location services changes with no success. I would say it is some app causing issues, but no idea which one could be...
ferjilo said:
Hi,
I have realized that my wifi connection drops down from more than 20 to only 1 Mbps with my lg g2. It happens with 2 routers and seems that if I reconnect the phone then I go back to more than 20 (and short later in goes down again). Any idea what can be?
Click to expand...
Click to collapse
got exactly the same problem
switching wifi off an on solves the problem for 2 minutes or so. then it drops to 1mbps again. tried different routers.
I figured out that it only concerns internet traffic. LAN traffic remains at full speed.
WHO can help please? :cyclops:
hmmm. wonder if this is the same problem a lot nexus 5 owners have including me.. there's quite a big thread on it in n5 QA section
there's no fix but workaround solutions include running in 2g mode or turning off data when on WiFi and even making a script to do so automatically when entering WiFi areas.
http://forum.xda-developers.com/google-nexus-5/help/slow-wifi-n5-t2514501
thank you for that interesting link.
unfortunately the solution turning mobile data off didn't worked for me.
I also tried static IP instead of DHCP - no success.
one strange thing, as already mentioned: LAN traffic to my computer works perfectly with max speed. (copying files e.g.)
so, wifi works in principle. It's about internet traffic only.
but which kind of software/hardware is able to distinguish between internet- and local traffic?
So like everyone else I have the 5GHz wifi problem. If I'm not in the same room as the router you can forget using 5GHz. So I found the link to the problem. I just don't know how to solve it. I connected to the 5GHz in a trouble location while having mobile data and Bluetooth turned on. Internet speeds were terrible to the point the speed test would barely run. I turned Bluetooth off, and the speed test are right on par with my old phone, and 5GHz is working fine while Bluetooth is off.
5Ghz is not meant for long range though, 2.4Ghz takes care of that..
You should be able to obtain a signal within around 30feet, potentially more, but it'll drop off at that point.
2.4 carries a lot better..
Could it be to do with the channels that the phone may be using for WiFi??
Turn off all WiFi devices and Bluetooth in the room and see how the test goes.
Very strange.
I am a bit confused as to why people are reporting needing to turn BT off to operate 5GHZ Wifi. BT operates in the 2.4xx space. If you are saying turning it off resolves your problem this points to either a greater hardware/software issue or that you are not operating in 5Ghz at all.
I understand how 2.4 and 5 work as far as range and bandwidth goes. I tested this theory in the same spot my old phone would get 100mbps down (what I pay for) while connected to 5Ghz Wifi. The OnePlus 8 Pro while connected to 5Ghz in the same spot with Bluetooth enabled would cause the phones speed to drop to around 5mbps down and sometimes to the point I get nothing and losing connection. Now if I repeat the same scenario but this time I disable Bluetooth the connection is stable and speeds are 90-100mbps down. I repeated this multiple times sitting in the same location. Yes I understand that BT uses 2.4Ghz. I'm not saying that you need to turn BT off for 5Hhz Wifi to function. What I am saying is some how on this phone, and reported by others, the 5Ghz Wifi on this phone does not function properly. There have been zero solutions or reasons why that I am aware of. My post was pointing to a possible reason why and the fact that it is a hardware/software problem and maybe the right person could look into. I have no reason why the BT being on and off affects the 5Ghz Wifi on this phone and not the 2.4Ghz but it does. And my old phone was a $300 Samsung A50 that I was testing this phone against in my post. I tried to find what channels the phone uses for WiFi but was unsuccessful. If you find the channel lost I would be more than happy to switch channels and see.
dladz said:
5Ghz is not meant for long range though, 2.4Ghz takes care of that..
You should be able to obtain a signal within around 30feet, potentially more, but it'll drop off at that point.
2.4 carries a lot better..
Could it be to do with the channels that the phone may be using for WiFi??
Turn off all WiFi devices and Bluetooth in the room and see how the test goes.
Very strange.
Click to expand...
Click to collapse
It ends up it is an issue with the channel. Before I bought the phone I had manually set my router to channel 153 because auto kept putting me on the same channel as my neighbor. The OnePlus will connect to channels 149 and 153 but isn't really functional. I had to select one of the UNII-1 Channels. Once I did that 5Ghz worked and is functional and stable. The sad part is the reception isn't nearly as good as my $300 Samsung. Maybe they'll improve that if they can. I'm still bewildered why turning off Bluetooth allowed channel 153 to work.
travle said:
It ends up it is an issue with the channel. Before I bought the phone I had manually set my router to channel 153 because auto kept putting me on the same channel as my neighbor. The OnePlus will connect to channels 149 and 153 but isn't really functional. I had to select one of the UNII-1 Channels. Once I did that 5Ghz worked and is functional and stable. The sad part is the reception isn't nearly as good as my $300 Samsung. Maybe they'll improve that if they can. I'm still bewildered why turning off Bluetooth allowed channel 153 to work.
Click to expand...
Click to collapse
Turn on auto channel on your router. You're going to have issues unless your entire network and devices are moderated perfectly.
Auto does the job