Related
Hi guys, I have successfully rooted using temporary TWRP + modded magisk method, but now I gain root and checked via Root checker. But the problem is most of the root functions don't work as /system is read-only. Any idea?
Ya i have an idea.. Happened to me as well. I tried almoat everything but system won't be accessible anywhere.. I followed the same tutorial and installed magisk 13.4.
The only solution i could find was flash the latest factory image, and root again using supersu. I used the AIO tool by ghpranav and have got my phone rooted with xposed working without any issues.
zazzy24 said:
Ya i have an idea.. Happened to me as well. I tried almoat everything but system won't be accessible anywhere.. I followed the same tutorial and installed magisk 13.4.
The only solution i could find was flash the latest factory image, and root again using supersu. I used the AIO tool by ghpranav and have got my phone rooted with xposed working without any issues.
Click to expand...
Click to collapse
I also fixed the issue. I flash the modified boot image and I am now gaining proper root access + Xposed. Get it working using Super SU, idk why Magisk keep failing thou. Was wanted to give Magisk a try, but it doesn't work properly on our device.
Cool:good:
Xposed isn't working with magisk? I was planning to install it
amithiel said:
Xposed isn't working with magisk? I was planning to install it
Click to expand...
Click to collapse
Only with SuperSU as I know.
Sent from my Mi A1 using Tapatalk
Guys, this is Magisk from Pixel. You can't expect that it is working. I wrote to MagiskDevs already, they are working on a own Version for Mi A1. Use for that time normal SuperSU (Xposed works normally )
how to??
soralz said:
I also fixed the issue. I flash the modified boot image and I am now gaining proper root access + Xposed. Get it working using Super SU, idk why Magisk keep failing thou. Was wanted to give Magisk a try, but it doesn't work properly on our device.
Click to expand...
Click to collapse
Hay how do you Fix the Read only Issue? can you please share the Modified Boot image and process for same, thanks
maxsan20 said:
Hay how do you Fix the Read only Issue? can you please share the Modified Boot image and process for same, thanks
Click to expand...
Click to collapse
https://desktop.firmware.mobi/device:1748
Just root with replacing the boot image then you are good to go.
soralz said:
https://desktop.firmware.mobi/device:1748
Just root with replacing the boot image then you are good to go.
Click to expand...
Click to collapse
Hi,
I have TWRP installed and unrooted, what I need to do please?
We7dy said:
Hi,
I have TWRP installed and unrooted, what I need to do please?
Click to expand...
Click to collapse
You need flash back stock boot image first, due to some limitations you can't have TWRP and SuperSU root at the same time. If you don't have the stock boot image. I suggest download the ROM from MIUI and then flash it. You can choose "flash_all_except_storage" option, this will keep your data.
http://en.miui.com/download-333.html
After flashing. Reboot back to fastboot and then:
Code:
fastboot oem unlock
After that just run root.bat from the cf-auto root folder you downloaded and wait for it to automatically reboot your phone. You should have root now, if you wish you can download SuperSU from the store.
soralz said:
You need flash back stock boot image first, due to some limitations you can't have TWRP and SuperSU root at the same time. If you don't have the stock boot image. I suggest download the ROM from MIUI and then flash it. You can choose "flash_all_except_storage" option, this will keep your data.
http://en.miui.com/download-333.html
After flashing. Reboot back to fastboot and then:
After that just run root.bat from the cf-auto root folder you downloaded and wait for it to automatically reboot your phone. You should have root now, if you wish you can download SuperSU from the store.
Click to expand...
Click to collapse
Ok, thanks. It's not possible to do that via TWRP? I don't have PC. Currently my bootloader is unlocked, I have TWRP and I'm unrooted.
We7dy said:
Ok, thanks. It's not possible to do that via TWRP? I don't have PC. Currently my bootloader is unlocked, I have TWRP and I'm unrooted.
Click to expand...
Click to collapse
I actually tried before, and I tell you the results:
Option 1 TWRP installed + Rooted with Magisk
= Pretty much useless as /system is read-only. Every root app doesn't function, unless it is system-less. But system-less modules nearly all doesn't work as the Magisk version too old. And this method won't trip safetynet
Option 2 no TWRP + Rooted with SuperSU (cf-root method) -- Currently using this state
= Got proper root access, Xposed works but will trip safetynet
Option 3 TWRP installed + Rooted with SuperSU (cf-root method)
= Don't try this, will cause your phone stuck in boot loop
soralz said:
I actually tried before, and I tell you the results:
Option 1 TWRP installed + Rooted with Magisk
= Pretty much useless as /system is read-only. Every root app doesn't function, unless it is system-less. But system-less modules nearly all doesn't work as the Magisk version too old. And this method won't trip safetynet
Option 2 no TWRP + Rooted with SuperSU (cf-root method) -- Currently using this state
= Got proper root access, Xposed works but will trip safetynet
Option 3 TWRP installed + Rooted with SuperSU (cf-root method)
= Don't try this, will cause your phone stuck in boot loop
Click to expand...
Click to collapse
So not possible via TWRP? Get root access and remove TWRP? I just need that... The root.
We7dy said:
So not possible via TWRP? Get root access and remove TWRP? I just need that... The root.
Click to expand...
Click to collapse
The best bet and possible trouble free is to first download the stock ROM from MIUI, reflash it and then root.
soralz said:
The best bet and possible trouble free is to first download the stock ROM from MIUI, reflash it and then root.
Click to expand...
Click to collapse
:/ Can't root with TWRP without system read only...
We7dy said:
:/ Can't root with TWRP without system read only...
Click to expand...
Click to collapse
It's possible to root without CF-Auto-Root? Why can't flash SuperSu directly with TWRP?
We7dy said:
It's possible to root without CF-Auto-Root? Why can't flash SuperSu directly with TWRP?
Click to expand...
Click to collapse
No, it will cause your phone stuck it boot loop if you try to flash the SuperSU zip directly from the official ChainFire site. I think probably is the AB partitioning problem or some sort (unsure). As I said you need to run CF-Auto root to get proper root access, otherwise flashing Magisk through TWRP will makes most of the root apps does not work properly unless it also uses system-less root function.
soralz said:
No, it will cause your phone stuck it boot loop if you try to flash the SuperSU zip directly from the official ChainFire site. I think probably is the AB partitioning problem or some sort (unsure). As I said you need to run CF-Auto root to get proper root access, otherwise flashing Magisk through TWRP will makes most of the root apps does not work properly unless it also uses system-less root function.
Click to expand...
Click to collapse
Ok I have TWRP installed can I use directly CF auto root?
We7dy said:
Ok I have TWRP installed can I use directly CF auto root?
Click to expand...
Click to collapse
No if you want proper root with CF-auto root you must not have TWRP installed. You either choose TWRP + Magisk (non-working root) or no TWRP but with SuperSU (working root, Xposed works too).
Follow the instruction here to get you on track:
https://forum.xda-developers.com/showpost.php?p=74326169&postcount=2
I did a clean reset and installed a fresh android 9. So no root, nothing.
Anyways I install magisk 5.8.3 and then tried to patch the boot.img from the android 9 factory image.
But every time I select the boot.img and try to patch it, it says "Failed! ! Installion failed!".
How has everyone else tried to install magisk on android 9?
xringo said:
I did a clean reset and installed a fresh android 9. So no root, nothing.
Anyways I install magisk 5.8.3 and then tried to patch the boot.img from the android 9 factory image.
But every time I select the boot.img and try to patch it, it says "Failed! ! Installion failed!".
How has everyone else tried to install magisk on android 9?
Click to expand...
Click to collapse
Not the way you are doing it. I boot to TWRP, without installing it and have TWRP install the full zip.
Hm I'll try this. Used to the boot patching.
xringo said:
Hm I'll try this. Used to the boot patching.
Click to expand...
Click to collapse
Just dirty flashed 9 over dp5, booted to twrp and flashed magisk. Rooted, and all appears well.
lorax70 said:
Just dirty flashed 9 over dp5, booted to twrp and flashed magisk. Rooted, and all appears well.
Click to expand...
Click to collapse
You can give link file magisk for use on android 9.
newyesor said:
You can give link file magisk for use on android 9.
Click to expand...
Click to collapse
Fwiw. I've been using this magisk version for dp3-5, but there are newer versions, but 16.4 works for me...
https://thedroidarena.com/download-magisk-16-4-beta/
I may try a newer version at some point, but I'm in no rush.
newyesor said:
You can give link file magisk for use on android 9.
Click to expand...
Click to collapse
Got this from the Flash kernel thread. It works fine on Pie :good:
https://drive.google.com/file/d/106ZiqeQxNYtCHkOEc6niuHRcWiCzG_eA/view?usp=drivesdk
xringo said:
I did a clean reset and installed a fresh android 9. So no root, nothing.
Anyways I install magisk 5.8.3 and then tried to patch the boot.img from the android 9 factory image.
But every time I select the boot.img and try to patch it, it says "Failed! ! Installion failed!".
How has everyone else tried to install magisk on android 9?
Click to expand...
Click to collapse
Make sure your using 16.7 you have to change in setting to beta. Same thing happened to me trying to use 16.0
I get updater error :2 failed to install every freaking time. No matter what zip i use. 1600 1671 1674
After dirty flash (remove -w) Android 9 PPR1 then install Magisk 16.7, it seems I am not able to set PIN or any security... Anyone has the same issue?
I have the same issue TWRP also can't decript the phone. I am going to wipe everything, and fastboot erase userdata.
lssong99 said:
After dirty flash (remove -w) Android 9 PPR1 then install Magisk 16.7, it seems I am not able to set PIN or any security... Anyone has the same issue?
Click to expand...
Click to collapse
Sent from my Pixel 2 XL using Tapatalk
Airpil said:
I have the same issue TWRP also can't decript the phone. I am going to wipe everything, and fastboot erase userdata.
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
Don't wipe your phone! Just flash the new boot.img from the image file (not OTA file) and you will be able to go back to your Android system and disable the pin. After disable the pin, boot into TWRP and flash the Magisk from here https://forum.xda-developers.com/showpost.php?p=77240449&postcount=2832
Hope this helps!
madmuthertrucker said:
I get updater error :2 failed to install every freaking time. No matter what zip i use. 1600 1671 1674
Click to expand...
Click to collapse
Use magisk uninstall first and this should solve the issue.
lssong99 said:
After dirty flash (remove -w) Android 9 PPR1 then install Magisk 16.7, it seems I am not able to set PIN or any security... Anyone has the same issue?
Click to expand...
Click to collapse
I have flashed ota from dp5 and fresh install of 9 and I cannot use security with 3.2.1_2 or 3.2.2 TWRP
Brakiss said:
I have flashed ota from dp5 and fresh install of 9 and I cannot use security with 3.2.1_2 or 3.2.2 TWRP
Click to expand...
Click to collapse
There's a 3.2.3-0 out as well. It's reportedly able to decrypt using alphanumeric codes. However a straight 4 number pin still isn't working for me.
Badger50 said:
There's a 3.2.3-0 out as well. It's reportedly able to decrypt using alphanumeric codes. However a straight 4 number pin still isn't working for me.
Click to expand...
Click to collapse
Where did you see this? I have pattern and would like to keep it.
Brakiss said:
Where did you see this? I have pattern and would like to keep it.
Click to expand...
Click to collapse
One of the other threads. Here's the twrp version though. https://dl.twrp.me/taimen/
Been having issues myself since updating to Pie yesterday. TWRP installed working fine. Installed magisk manager, set to beta channel. Rebooted into TWRP and flashed magisk 16.7, phone hanging at the lovely google logo page. I then have to run the uninstaller back in TWRP or i cant get the phone to boot. Anyone had this?
pr1vate piles said:
Been having issues myself since updating to Pie yesterday. TWRP installed working fine. Installed magisk manager, set to beta channel. Rebooted into TWRP and flashed magisk 16.7, phone hanging at the lovely google logo page. I then have to run the uninstaller back in TWRP or i cant get the phone to boot. Anyone had this?
Click to expand...
Click to collapse
Yeah, rooting on P is a little tricky it seems. You'll likely have to run the uninstaller, then boot up. Then go back to twrp and flash this version of magisk. It's the 16.7(4) version found in the Flash kernel thread :good:
https://drive.google.com/file/d/106ZiqeQxNYtCHkOEc6niuHRcWiCzG_eA/view?usp=drivesdk
Badger50 said:
Yeah, rooting on P is a little tricky it seems. You'll likely have to run the uninstaller, then boot up. Then go back to twrp and flash this version of magisk. It's the 16.7(4) version found in the Flash kernel thread :good:
https://drive.google.com/file/d/106ZiqeQxNYtCHkOEc6niuHRcWiCzG_eA/view?usp=drivesdk
Click to expand...
Click to collapse
Your not wrong there. Tried it as you suggested, same thing, hanging at the G logo page with the bar animation under it. Had to run the uninstaller to get back into my phone. Very odd
Hi, I've got a new update today (11/02) and I want to know if there's already a method to root on Android 10. I've already searched for it but didn't find anything. Thanks.
MatheusPimentel said:
Hi, I've got a new update today (11/02) and I want to know if there's already a method to root on Android 10. I've already searched for it but didn't find anything. Thanks.
Click to expand...
Click to collapse
You searched for it bad, then.
https://dropmefiles.com/PZBqh Here's boot.img patched with current Magisk (canary channel).
kibuuka said:
You searched for it bad, then.
https://dropmefiles.com/PZBqh Here's boot.img patched with current Magisk (canary channel).
Click to expand...
Click to collapse
I have just to flash it on TWRP? In Android 10 I can use the same TWRP as I've been using on Android 9?
MatheusPimentel said:
I have just to flash it on TWRP? In Android 10 I can use the same TWRP as I've been using on Android 9?
Click to expand...
Click to collapse
It's best to wait until a stable twrp is made.
I followed this and it worked perfectly.
https://forum.xda-developers.com/showpost.php?p=80639099&postcount=2856
MatheusPimentel said:
Hi, I've got a new update today (11/02) and I want to know if there's already a method to root on Android 10. I've already searched for it but didn't find anything. Thanks.
Click to expand...
Click to collapse
I followed the standard procedure and root remained but lost decryption in twrp:
Rebooted in twrp
Ran latest magisk uninstaller in twrp
Installed Android10
Installed latest twrp of Mauronofrio
Rebooted info twrp
Installed magisk
Rebooted into system
I just updated OxygenOS and didn't see that there was a version change from Android 9 to 10 involved.
TWRP was replaced with the stock recovery during the process. That always happened when running an OxygenOS system update, but I could always flash TWRP again afterwards. That doesn't seem to work anymore now.
I guess my mistake was to reboot to system after updating, correct?
Didn't pay enough attention, I thought it was just another Android 9 update. That'll teach me...
I lost Root mine now is 10.3.0 NO ROOT
help
yahaa08 said:
I lost Root mine now is 10.3.0 NO ROOT
help
Click to expand...
Click to collapse
If you want to root I can help u.
Ok so i'm running now OOS Stable 10.0 with TWRP running, and Magisk ofc.
Now, i used this guide -
https://forum.xda-developers.com/oneplus-6t/how-to/guide-how-to-twrp-data-decryption-t3995861
To update from 9.0.17 to 10.0
But never tried to update from 10.0.
Can i update like the usual process ?
Enter Recovery > Flash ROM > Flash TWRP > Flash Magisk ?
Or i need to do it differently .
Edit : I want to update from 10.0 to OB3.
yot2703 said:
Ok so i'm running now OOS Stable 10.0 with TWRP running, and Magisk ofc.
Now, i used this guide -
https://forum.xda-developers.com/oneplus-6t/how-to/guide-how-to-twrp-data-decryption-t3995861
To update from 9.0.17 to 10.0
But never tried to update from 10.0.
Can i update like the usual process ?
Enter Recovery > Flash ROM > Flash TWRP > Flash Magisk ?
Or i need to do it differently .
Edit : I want to update from 10.0 to OB3.
Click to expand...
Click to collapse
Why would it be different?
It seems complicated enough for people to catch up with only one logical method, I dare not imagine what it would be if there were different procedures....
yot2703 said:
Enter Recovery > Flash ROM > Flash TWRP > Flash Magisk ?
Click to expand...
Click to collapse
If you do it this way make sure you update to the latest version of TWRP that was released today (3.3.1-30) before upgrading the ROM.
Open magisk manager and restore boot.img.
Update locally in system settings.
Dont reboot.
Install magisk to inactive slot in magisk manager.
Reboot and provit.
No need for twrp.
Striatum_bdr said:
Why would it be different?
It seems complicated enough for people to catch up with only one logical method, I dare not imagine what it would be if there were different procedures....
Click to expand...
Click to collapse
There are people updating with local update.
alryder said:
If you do it this way make sure you update to the latest version of TWRP that was released today (3.3.1-30) before upgrading the ROM.
Click to expand...
Click to collapse
Update it via Magisk?
bokkoman said:
Open magisk manager and restore boot.img.
Update locally in system settings.
Dont reboot.
Install magisk to inactive slot in magisk manager.
Reboot and provit.
No need for twrp.
Click to expand...
Click to collapse
I still want TWRP , Flash it over Magisk?
And can you provide me the boot.img? 10.0
yot2703 said:
There are people updating with local update.
Update it via Magisk?
I still want TWRP , Flash it over Magisk?
And can you provide me the boot.img? 10.0
Click to expand...
Click to collapse
And why would you need TWRP?
You don't need boot.img. Magisk automatically backups the original boot.img and patches it. That way you can restore it thru magisk manager. And patch the new boot.img (install to in-active slot) after local upgrade.
bokkoman said:
And why would you need TWRP?
You don't need boot.img. Magisk automatically backups the original boot.img and patches it. That way you can restore it thru magisk manager. And patch the new boot.img (install to in-active slot) after local upgrade.
Click to expand...
Click to collapse
I'm trying this guide
https://forum.xda-developers.com/oneplus-6t/how-to/guide-how-to-update-to-op6t-ob3-q-t4021299
yot2703 said:
I'm trying this guide
https://forum.xda-developers.com/oneplus-6t/how-to/guide-how-to-update-to-op6t-ob3-q-t4021299
Click to expand...
Click to collapse
Well, that doesn't answer the question: why do you need TWRP?
The problem is that you ask for a recipe, without knowing clearly what you're doing when applying the recipe.
Yes you can update with local update while keeping Magisk and twrp. See first posts of OOS 10.0.1 thread in Guide section.
Yes you can update from within twrp, the way ROMs are fleshed since nearly a decade
Yes you can flash twrp with Magisk manager, since months it's a basic knowledge.
No you don't need stock boot.img
Don't follow the guide you quote WHICH WAS WRITTEN WHEN NO WORKING TWRP was available for A10. It's outdated now. Use regular and classical procedures
bokkoman said:
Well, that doesn't answer the question: why do you need TWRP?
Click to expand...
Click to collapse
Flash other zips and kernels?
yot2703 said:
Flash other zips and kernels?
Click to expand...
Click to collapse
Alright, well then it is useful.
IMHO, i recommend using stock OOS and root only. Because it already is a great rom. You can flash certain extras with magisk manager anyway.
But whatever rows your boat
Striatum_bdr said:
The problem is that you ask for a recipe, without knowing clearly what you're doing when applying the recipe.
Yes you can update with local update while keeping Magisk and twrp. See first posts of OOS 10.0.1 thread in Guide section.
Yes you can update from within twrp, the way ROMs are fleshed since nearly a decade
Yes you can flash twrp with Magisk manager, since months it's a basic knowledge.
No you don't need stock boot.img
Don't follow the guide you quote WHICH WAS WRITTEN WHEN NO WORKING TWRP was available for A10. It's outdated now. Use regular and classical procedures
Click to expand...
Click to collapse
Well now i'm stuck with no twrp. how to flash it ?
yot2703 said:
Well now i'm stuck with no twrp. how to flash it ?
Click to expand...
Click to collapse
The answer is in the post you quoted:
'Yes you can flash twrp with Magisk manager, since months it's a basic knowledge"
What I did was open Magisk Manager - go to Modules - click Add (+) - select the TWRP installer (zip) - exit Magisk Manager - reboot to TWRP - reinstall Magisk.
There might be a way to reinstall Magisk from Magisk Manager to the active slot but I'm not sure so I did it through TWRP.
I have unlocked bootloader + root with magisk. Is there anything special I need to do before letting the OTA update? What about afterwards, will I need to re root?
Sorry if this question was already asked and answered- I couldn't find anything. Just want to make sure I'm not doing anything stupid, thanks in advance.
For clarity I'm on the latest magisk canary and am using a U.S. phone.
cubeplayer1 said:
I have unlocked bootloader + root with magisk. Is there anything special I need to do before letting the OTA update? What about afterwards, will I need to re root?
Sorry if this question was already asked and answered- I couldn't find anything. Just want to make sure I'm not doing anything stupid, thanks in advance.
For clarity I'm on the latest magisk canary and am using a U.S. phone.
Click to expand...
Click to collapse
Update using local, dont reboot - go to magisk; install to inactive slot(after OTA) *disable module to be safe - Then restart
cubeplayer1 said:
I have unlocked bootloader + root with magisk. Is there anything special I need to do before letting the OTA update? What about afterwards, will I need to re root?
Sorry if this question was already asked and answered- I couldn't find anything. Just want to make sure I'm not doing anything stupid, thanks in advance.
For clarity I'm on the latest magisk canary and am using a U.S. phone.
Click to expand...
Click to collapse
If you're on ob3 I read that it needs to wipe, if you're on 11.0.0 stable then just update, don't reboot, disable magisk modules, patch after OTA in magisk and that's it
dladz said:
If you're on ob3 I read that it needs to wipe, if you're on 11.0.0 stable then just update, don't reboot, disable magisk modules, patch after OTA in magisk and that's it
Click to expand...
Click to collapse
Sounds easy enough. Should I also worry about flashing back to stock kernel as well?
cubeplayer1 said:
Sounds easy enough. Should I also worry about flashing back to stock kernel as well?
Click to expand...
Click to collapse
If you update then the kernel gets done too.
If you have modules installed disable them first.
You'll be fine.
PS: so are you on ob3 or 11 stable?
I'm rooted with an unlocked bootloader on 11.IN11AA (Global). How do I perform a local upgrade without the OTA file to put into the root folder? It seems like the Global version of the OTA file is nowhere to be found and I can't download it via System Update since it fails due to root. Do we need to just wait for the 11.0.1.1.IN11AA OTA zip file to be posted? Thanks in advance.
Yes, looks like we are in waiting mode for it to show up...
dladz said:
If you update then the kernel gets done too.
If you have modules installed disable them first.
You'll be fine.
PS: so are you on ob3 or 11 stable?
Click to expand...
Click to collapse
Stable. Haven't done the update yet because I'm getting "installation problem" when I try to download OTA. Oxygen updater not working either. Not sure what's up lol but I'm over it. Guess I gotta go find the file and install locally.
cubeplayer1 said:
Stable. Haven't done the update yet because I'm getting "installation problem" when I try to download OTA. Oxygen updater not working either. Not sure what's up lol but I'm over it. Guess I gotta go find the file and install locally.
Click to expand...
Click to collapse
You'd have to install locally even with oxygen updater.
galaxys said:
Yes, looks like we are in waiting mode for it to show up...
Click to expand...
Click to collapse
Yea I guess that's why Oxygen Updater isn't showing anything new for me. Once it shows up on the internet, I'm sure the OU app will refresh and show an available update.
cubeplayer1 said:
I have unlocked bootloader + root with magisk. Is there anything special I need to do before letting the OTA update? What about afterwards, will I need to re root?
Sorry if this question was already asked and answered- I couldn't find anything. Just want to make sure I'm not doing anything stupid, thanks in advance.
For clarity I'm on the latest magisk canary and am using a U.S. phone.
Click to expand...
Click to collapse
For those with trouble installing 11.0.1.1 AA update with root as Google server only pushed incremental OTA at the moment.
1. Flash your current version unpatched boot.img into both slots in fastboot
2. Use the following command to boot from a patched boot, but not modifying the partitions. (fastboot boot patched.img)
3. Update with system updater with incremental ota.
4. Don't reboot, but flash the magisk with magisk app to the inactive slot.
5. Reboot and done.
cubeplayer1 said:
Stable. Haven't done the update yet because I'm getting "installation problem" when I try to download OTA. Oxygen updater not working either. Not sure what's up lol but I'm over it. Guess I gotta go find the file and install locally.
Click to expand...
Click to collapse
I just updated and kept root. I used to use this method on my Pixel 2 XL when I didn't want to flash the images, or was away from my PC.
Method: https://tinyurl.com/y2bxeuq5
The link should work now.
Disregard the TWRP part (skip Step 4....go from Step 3 to Step 5).
dlhxr said:
For those with trouble installing 11.0.1.1 AA update with root as Google server only pushed incremental OTA at the moment.
1. Flash your current version unpatched boot.img into both slots in fastboot
2. Use the following command to boot from a patched boot, but not modifying the partitions. (fastboot boot patched.img)
3. Update with system updater with incremental ota.
4. Don't reboot, but flash the magisk with magisk app to the inactive slot.
5. Reboot and done.
Click to expand...
Click to collapse
Thanks for these steps, it worked for me. After I flashed Magisk via the Magisk App to the inactive slot, I rebooted and had the latest version installed with root preserved. :highfive:
After I did it I'm getting the com.android.phone stopping and my Sims aren't recognized. I cleared cache, phone and SIM toolkit but didn't work. Grrrrr
I'm a rooted global user and update has never showed until today. It was only 405mb and Google play services was showing the update. Oxygen updater shows nothing and system update shows nothing. I'm gonna wait to see what happens since it's not a full update
Same here global 406 mb ota. It's like not recognizing we have root...
bouchigo said:
I just updated and kept root. I used to use this method on my Pixel 2 XL when I didn't want to flash the images, or was away from my PC.
Method: https://tinyurl.com/y2bxeuq5
The link should work now.
Disregard the TWRP part (skip Step 4....go from Step 3 to Step 5).
Click to expand...
Click to collapse
Good looking out bro, that worked a charm. :good:
bouchigo said:
I just updated and kept root. I used to use this method on my Pixel 2 XL when I didn't want to flash the images, or was away from my PC.
Method: https://tinyurl.com/y2bxeuq5
The link should work now.
Disregard the TWRP part (skip Step 4....go from Step 3 to Step 5).
Click to expand...
Click to collapse
^^^^^^This -- easiest and fastest root upgrade I have ever done on any device.
Magisk is now built to do it this way.
bouchigo said:
I just updated and kept root. I used to use this method on my Pixel 2 XL when I didn't want to flash the images, or was away from my PC.
Method: https://tinyurl.com/y2bxeuq5
The link should work now.
Disregard the TWRP part (skip Step 4....go from Step 3 to Step 5).
Click to expand...
Click to collapse
This worked for me as well taking the actual partial OTA update from system update and going through the steps in Magisk.
A little nerve wracking considering the many times trying to update has failed on my last couple OP devices, but at least this time, it worked.
Thanks.
anyone have a patched magisk boot for IN2025?
I did the steps of flashing the stock boot.img, then booting the patched img, installed the OTA, used magisk to patch before reboot, but when it rebooted it said installation failed, and i was unable to access magisk after that as it was on the wrong slot... I had to apply the OTA update again, and now am stick without root
IN short, need either a stock IN2025 boot image to patch myself, or a magisk patched one...
TIA