Hello! So I have had my 6t for over a year. It is a T mobile version and I have it unlocked and on the Beta (9.0, Pie). All a sudden my fingerprint wasn't working. So I went ahead and scanned it again, it added just fine (except this new message about finger already been scanned, and try different angles) in red letters about halfway through the scan. I deleted all my scans, so this doesn't make sense. Anyway, this happens EVERY time now. Either way, when I try to use it to unlock the phone or for apps, it lights up fine and just doesn't work at all. So I then reset it, no luck, installed t mobile ROM, no luck, then I put it back to the beta, and it worked like a charm for about a half a day. Then the same thing yet again. I then tried some custom ROMs and it works just fine on those, but I got encrypted so I went back to t mobile and tried the beta, nothing.
It is baffling me, and I am pretty frustrated. Any ideas? I am worried this is too intermittent and just weird for anyone to have any ideas. I am just lost.
Thanks
Joshua
Related
Ok, so my phone will not vibrate at ALL anymore. I don't want to pay the $50 to get a new one, and I don't want to have to revert back to stock and unroot and take it to Verizon to see if they can fix it.
So here's the details of what happened. I don't know if it's fixable, but I thought I'd see if anyone could offer some advice.
I was running DL30 Blackhole, very basic. Had a theme installed over it. Everything was running perfectly fine for a while. And then I was getting on the internet to do something, and connected to wifi. The wifi was through my college, so you had to login on their homepage instead of just entering a password, and the page wasn't coming up, internet was being extremely slow. So I tried turning off mobile data to see if it might force me to login to the page for wifi. Turned of 3G. Nothing happened. Turned off wifi. Turned 3g back on. Then I got a google system force close error and my phone rebooted itself.... Now I have no vibration AT ALL. No hatic feedback, no vibration for notifications. Nothing.
There was nothing even related to vibration that should have happened in this situation, my phone just freaked out. Didn't drop it or hit it on anything at all, it was laying flat on a table. So I don't know if something just fried my phone's vibration or what, but I would love it if someone out there had a suggestion for me.
I'd try just following the steps to update to super clean 2.4. some kernels act up on your version and drop the vibration. It happened to me. 2.4 is running awesome
Sent from my SCH-I500 using XDA App
Yeah I forgot to put that in the first post. I actual did a complete system wipe. Back to stock DL09, flashed the EB01 modem, and SC 2.4 over it. And still no vibration. I did all that this morning.
Also had a weird glitch where after I installed most of my apps I tried to boot into recovery and instead my phone decided to do a data wipe again, but that wasn't a HUGE issue (as long as it doesn't happen again).
Spazguitar306 said:
Yeah I forgot to put that in the first post. I actual did a complete system wipe. Back to stock DL09, flashed the EB01 modem, and SC 2.4 over it. And still no vibration. I did all that this morning.
Also had a weird glitch where after I installed most of my apps I tried to boot into recovery and instead my phone decided to do a data wipe again, but that wasn't a HUGE issue (as long as it doesn't happen again).
Click to expand...
Click to collapse
Try reverting back to stock again and prior to going back up to eb01 and superclean...wipe a few times.
I had a similar issue
Spazguitar306 said:
Ok, so my phone will not vibrate at ALL anymore. I don't want to pay the $50 to get a new one, and I don't want to have to revert back to stock and unroot and take it to Verizon to see if they can fix it.
So here's the details of what happened. I don't know if it's fixable, but I thought I'd see if anyone could offer some advice.
I was running DL30 Blackhole, very basic. Had a theme installed over it. Everything was running perfectly fine for a while. And then I was getting on the internet to do something, and connected to wifi. The wifi was through my college, so you had to login on their homepage instead of just entering a password, and the page wasn't coming up, internet was being extremely slow. So I tried turning off mobile data to see if it might force me to login to the page for wifi. Turned of 3G. Nothing happened. Turned off wifi. Turned 3g back on. Then I got a google system force close error and my phone rebooted itself.... Now I have no vibration AT ALL. No hatic feedback, no vibration for notifications. Nothing.
There was nothing even related to vibration that should have happened in this situation, my phone just freaked out. Didn't drop it or hit it on anything at all, it was laying flat on a table. So I don't know if something just fried my phone's vibration or what, but I would love it if someone out there had a suggestion for me.
Click to expand...
Click to collapse
I had a similar issue. I actually flashed my phone all the way back to stock. Still no vibrate. I think there could be an issue with the vibrate motor on the fascinate.
I say that because there was nothing I could do to bring vibrate back. All of sudden, it began working again for one day. After that one day vibrate and haptic working, it stopped working for another couple of days. Then, I dropped the phone on accident. Vibrate came back. Eventually, it stopped working again so I took the phone to verizon and they ordered me a new one.. No charge. I bought my phone in Sept 2010.
Good Luck!
I got my A7 and flashed the 4/17 rom right away, used it stock for a couple of days then installed dexters mod1.42 and for a day or two it worked fine. Then the menu key stopped working. sometimes it would work for an hour and then stop working again. I deleted the dexter mod, wiped cache and did factory reset when the key worked and everything was fine.
Then I did the bestialbub a7-gapps zipmod and everything worked great for 4-5 days then the same problem, no menu key. are there any known apps that may cause this problem? I am waiting for the menu key to work again so I can try again, are there any settings or other mods that will get me the market but leave me close to stock.
steamtv support just had me do a reset and flash latest firmware and that doesnt help much.
Please, I love the A7 when it's working and need some help.
Thanks,
Billy
Does this happen when the back of the device is hotter than warmer? I've had this happen often when the days are warmer and hotter. That's the reason why because the heat affects parts of the wiring. The other solution is to use Button Savior (an app on the market).
Ytain
The menu smart key comes and goes no matter the temp. It's not working now, sometimes it will work for a little while and then stop again. I can't wipe/reset without the memu key. I want to get it back to stock to see if it's a hardware problem then take it from there. Any suggestions anyone?
billy
same here (I thought, I'm the only one encounter this kind of problem). My Aunt gave me A7 as present. after 2 days, all the smart keys malfunctioned. it works fine for 10 min after that it wont work anymore. I've installed button savior for remedy. I think ytain is right, A7 has problem when the back of the device becomes hot.
Hello,
I had the same issues with some of the keys of the keyboard. but at first it started only happening when the battery was low but recently it was happening all the time.
This was making my life difficult as i write some sms to my friends and it's quite annoying.
I left my phone untouched and went to repair center of my provider to show what was happening. Put my phone there for repair and in the same day went there to pick up the phone good as new.
The issue is that the stripes connecting from the keyboard to the cellphone were a bit fragile and probably broke or it wasn't making any contact whatsoever. Now i have the phone working 100%. no problem.
Hope this helps
Hi, does anyone had issues with fingerprint scanner not working? I updated my software to the latest on A2017U with the October update. After half a day my fingerprint scanner stoped working completely. I tried to reregister it didn't work . I did a Factory reset still nothing its dead .
So its working now by itself, maybe moisture gets in there somehow thats the only thing i can think of. Thanks everyone.
I have issues with mine too, in the past to fix it I have gone into the finger prints settings and deleted all the ones that are there and then rebooted, then you have to setup your prints again. That seemed to do the trick for me.
http://www.androidauthority.com/problems-zte-axon-7-fix-716895/
I couldn't access the device with the fingerprint reader on the first start up after the update, and I also can't access it using the pattern, even though I'm sure I'm entering the right one. So it loos like I have to do a factory reset now
Ratedzelaya said:
I have issues with mine too, in the past to fix it I have gone into the finger prints settings and deleted all the ones that are there and then rebooted, then you have to setup your prints again. That seemed to do the trick for me.
http://www.androidauthority.com/problems-zte-axon-7-fix-716895/
Click to expand...
Click to collapse
This fixed my problem.
Today, my fingerprint scanner just stopped working, including the notifications gesture. Restarted the phone, went fine, then the same thing happened after work on the way home. Rebooted, still wouldn't work. Started working again when I got home. Installed the OTA update and reregistered the fingerprints. Will keep an eye on it.
Anyone else had this issue?
I had a similar issue as well. On two different occasions the sensor stopped working completely, both unlock and notification gesture. Rebooting the phone seemed to fix it for me.
It is really annoying - especially since as it doesn't happen constantly it might not help taking the phone back for warranty.
My fingerprint scanner has been working perfectly fine until yesterday. In the morning I went on my phone and it said "fingerprint hardware not available" so I rebooted since this has happened a couple times before. This time was different. I tried to stop the oneplus fingerprint service in the apps menu in settings but the service wasn't there. So I tried reflashing my ROM (lineageos) and noe there is no fingerprint error message on the lockscreen and I get an error when trying to add fingerprints this is strange since my home button is working fine. Any help is appreciated, thanks
Sent from my ONE A2005 using Tapatalk
Try going to oxygen os and test it, it will probably work then clean flash any rom