[Q] menu smart key stops working - A7 General

I got my A7 and flashed the 4/17 rom right away, used it stock for a couple of days then installed dexters mod1.42 and for a day or two it worked fine. Then the menu key stopped working. sometimes it would work for an hour and then stop working again. I deleted the dexter mod, wiped cache and did factory reset when the key worked and everything was fine.
Then I did the bestialbub a7-gapps zipmod and everything worked great for 4-5 days then the same problem, no menu key. are there any known apps that may cause this problem? I am waiting for the menu key to work again so I can try again, are there any settings or other mods that will get me the market but leave me close to stock.
steamtv support just had me do a reset and flash latest firmware and that doesnt help much.
Please, I love the A7 when it's working and need some help.
Thanks,
Billy

Does this happen when the back of the device is hotter than warmer? I've had this happen often when the days are warmer and hotter. That's the reason why because the heat affects parts of the wiring. The other solution is to use Button Savior (an app on the market).
Ytain

The menu smart key comes and goes no matter the temp. It's not working now, sometimes it will work for a little while and then stop again. I can't wipe/reset without the memu key. I want to get it back to stock to see if it's a hardware problem then take it from there. Any suggestions anyone?
billy

same here (I thought, I'm the only one encounter this kind of problem). My Aunt gave me A7 as present. after 2 days, all the smart keys malfunctioned. it works fine for 10 min after that it wont work anymore. I've installed button savior for remedy. I think ytain is right, A7 has problem when the back of the device becomes hot.

Hello,
I had the same issues with some of the keys of the keyboard. but at first it started only happening when the battery was low but recently it was happening all the time.
This was making my life difficult as i write some sms to my friends and it's quite annoying.
I left my phone untouched and went to repair center of my provider to show what was happening. Put my phone there for repair and in the same day went there to pick up the phone good as new.
The issue is that the stripes connecting from the keyboard to the cellphone were a bit fragile and probably broke or it wasn't making any contact whatsoever. Now i have the phone working 100%. no problem.
Hope this helps

Related

Wizard wont turn on - however lights still flash?????

Im currently using the imate rom 2.16.9.1.wwe Rom date 2/6/06 extrom version 0 2.16.9.101
It has been working fine for the past few weeks and the performane increase has been much better. I was also using the oush mail which also worked well. Then a few days ago I started to have a few problems with the phone, basically it would look as if it was working the lights flashing, however when I went to turn it on it wouldn’t turn on. The only way to resolve this si to soft reset the handset. This problem is now occuring on average 2 times a day! I havent even installed any new software!! Thwe only major incident before this started happening was I used skype twice! But havent used it since! I have also stopped push mail cause I thought this maybe the issue but it didn’t solve it!
Its so annoying cause I think the device is operating normally cause I see the flashing lights however it cant do anything cause it has frozen!
Any ideas???
I was thinking of going for a hard reset but if I restore my backup ive taken with spb will this not just reintroduce the problem?
just to add for further info i have no apps running and the
program memory is total - 44.01mb
in use 19.67mb and Free 24.34
thats after a soft reboot!!
This might be a really silly suggestion, so appologies if it is, but could it be just the backlight turned off for some reason so it looks like the device is off when it is actually on?
No, I don't think that it is the backlight as I am also now experiencing this same problem ... approx 1 - 2 time daily. You think that the phone is functioning until you try to use it. Only option is soft reset.
Any help on this would be appreciated.
no at present a soft reset is the only cure and even then it may occur again later on! Bluey HK are you using the same rom as me??? the imate one?
its done it twice already today and its only midday! the last time i was just browsing the web, closed the browser, then switched it off and then couldnt turn it back on! Do you think it may be a memory leakage issue????
This happened to me yesterday on my T-Mobile MDA. I am running the latest T-Mobile_RUU_Wizard_2210401_221_20710_ENG_US image from xelencin.
What appears to have triggered the problem for me was attempting to connect to T-Mobile's My Email app to download mailbox settings while the signal level is too low or intermittent (Wi-fi and Bluetooth were disabled).
The backlight would not turn on and I could observe the My Email app trying to access the server.
it sounds as though it may be a bug connected with a GPRS connection???
ahh its done it again, this time i wasnt doing anything just died! I think i am gonnna have to do a hard reset cause this is making the phone unuseable!
if i do a hard reset and then install a back up is there a high possibility that this will reintroduce the bug???
its not the backlight
my 8125 is having the same damn problem. its nto a backlight issue, as it just stalls, and the past 4 times its done it, i've just removed the battery and turned it back on as a soft reset wont work, and i can't it to react to any commands. this is either a software issue all our phones are dying. i was having this problem with summitter's previous 2.17 rom, then updated to the recent 2.17.11 aku 2.2 rom... thinking the upgraded rom is what it needed...NOPE... still crashed. almost all instances i believe are when the wifi connection was active. but i could be making that up, i'm positive on 3 occasions it was with a wifi connection active. but not too sure about the 4th.
this is making me insane, and we need to figure out whats up~!
to expound on the problem:
one time i was in the middle of checking voicemail, then tried to delete, but the screen wouldn't light up, and it wasn't responding to my option 7 to delete command. the other time was in the middle of a phone call. something's up....
i am having the same issue with my 9100, its running the latest offical rom, mine does it whenever it feels i dont believe it is wifi or gprs related as i have the problem at time when i have been using neither.
there does not appear to be a link to any software i am using either
any ideas?.
yea- i get the same sometimes, i go to take my phone out of standby and it wont do anything, the power button doesnt work- the light just flashes. sometimes it freezes on the today screen, the power button dont work or anything. really need to sort this!
any ideas? any1 else get this? its where u put ur MDA in standby, and next time u press power button 2 turn on nufin happens, but the leds still flash at the top!
yep i still get the problem! still no cure!
I have exactly the same problem... I just pick up my device from my pocket to use it, I press on the power button once but the device won't wake up from the standby mode. I wish someone can give us a cure.
Low Battery...
I had this happen to me once recently...for me it was becuase my battery was too low. Freaked me out, because everything looked good, but I would power on and get nothing! Right after it started it powered on for a sec then quit. I had to put it on the charger and leave it for a couple hours to get a good solid charge, then everything was fine. Hope this helps....
thanks for the response, unfortunately mine is definately not related to the battery charge!
mine hasnt done it in the last day, ive been leaving it a while before putting it into standby. i used to exit my app (messaging or whatever) and shut it off straightaway, but i give it a sec or 2 to make sure its all good
and its doin ok so far!

Phone goes to sleep and won't wake up.

It all started when I upgraded to a new rom. So the first thing I did was ditch the rom and install a new rom. I was running Black 3.0.1 and now updated to Black Satin.
The time it takes to lock up seems to very. I have had times where I could leave it for 4hrs and then hit the power button and it comes to life, other times I can have it sit for 30mins and hit the power button only to find it won't wake up. When it is in its locked up state, it won't even receive calls. It just sits there with the top right led blinking green. Its really getting frustrating.
In order to get it to come back I have to push the reset button on the bottom of the phone with my stylus.
I have been reading as many "lock up" threads as I can on the forum and so far it seems that most are to do with Push Mail. Which I don't use.
Any suggestions will be much appreciated.
I dont know if its a ROM issue as my does this sometimes (dont know about incoming calls as i dont get that many anyway) I am on the stock T-Mobile rom
I dont use push mail either
doesn't happen much to me (now i said i bet it does it all the time )
I think it seems to do it when i havnt soft restarted it for a while, so it could be that the lock up is due to memory or something and it just needs a soft reset to clear it down
I also have this problem, only a soft reset makes the phone respond. This happens sometimes when the phone has only been reset an hour previously.
It also happened once during the night and caused my alarm to not go off, so I only made it to the office for 10:30!!
Did you guys find a solution or did the problem just go away?
bump
got the same problem.
For me the problem went away only after I installed a new radio and new rom. I honestly don't know what was causing the problem. But it went away and I am happy. There might have been an issue with an installed app, but I never did find any app that directly caused the issue.

G-Sensor and call problems

Well first of all I love Android, but I have some problems. The first problem I have is the G-Sensor, it used to work, but suddenly it stopped working properly. Now when I want to rotate the screen I have to hold it the way I want it to turn for 20 seconds, is there a solution to this problem?
Now my second and most important problem is calling. I have multiple problems with it. One of them is when I'm being called while the phone is in lockscreen I try answering it but I have to wait ten seconds before it actually answers, mostly the caller is already connected to my voicemail. My second problem is the End Call button when is press it, it says ended but I also have to wait ten seconds before it actually ends the call. Does anyone have the solution to these problems?
For further information, I use Froyostone 3.2. And sorry for my poor English.
Could anyone please help me, sorry for the bump?
Also I notice that my hardware buttons light up randomly.
I also have the same problem. Well at least with the g sensor. Running android 2.2 the problem with my g senor is whenever I flip messages they will not flip back. (along with anything else that does flip) I've done the re-calibration on the phone and this is what happens.. x axis is fine y axis either stays all the way up or goes all the way down. When I start the calibration the y and x axis both go to the middle but after when calibration is done the y axis goes right back up or right back down.
Thanks in advance if any one can help.
The same thing happens to me when I'm trying to calibrate it. Also have you tried holding your device for 10-20 seconds the way you want to turn it? This solves the problem for me, but I would like it to happen a little faster.
I calibrated the G-sensor when I first put on Android, bad mistake, the Bubble just stayed at the top and nothing rotated properly. The Sensor worked fine in WinMo so I guessed I'd screwed it up.
Since read somewhere on here that you shouldn't Calibrate it in Android.
Had to reinstall Android fresh to get it to work again, but its been working fine since.
Was on froyostone 3.1, when I reinstated upgraded to 3.2, all is great
Sent from my HTC HD2 using XDA App
Okay that could be the solution. Do you also know if I need to put a new data image on it. I would like to keep my old one, but I thinks the problem lies there or doesn't it?
You might be able to calibrate your G-sensor in Android. Click the calibrate button and place your phone screen down on a flat surface. For some reason, calibrating only seems to be working when you face your phone screen down. It did the trick for me, fixed the offset and it's working just fine now.
Daan0 said:
Okay that could be the solution. Do you also know if I need to put a new data image on it. I would like to keep my old one, but I thinks the problem lies there or doesn't it?
Click to expand...
Click to collapse
I tried changing the data image from 3.1 to 3.2 but the g-sensor was the same, i just used Titanium Pro to backup the data i wanted to keep and reinstalled.
Try the Phone on its screen re-calibrate as suggested, ive read that may work as Roeltjuh suggested, but that was after i had reinstalled
That seem to do the trick, thank you!
Does anyone have the solution to my other problems? Also I've noticed a new problem, sometimes my WiFi won't turn on till I reboot. In the settings menu it says shutting down WiFi. But its already been shut down, and because of the loading it takes to shut down wifi, I can't turn it back on and my data connection says that it will be turned on when my WiFi is shut down. So I always have to reboot.
Sorry for all the questions, but I believe some of them can be fixed and they're too annoying to ignore. And again sorry for my poor English.

[Q] touchscreen issues

i've had this phone for a few weeks and everything worked fine. I flashed chucky's rom, and ran CoreDroid Evo Supersonic from the SD card. it worked great. yesterday, the touchscreen stopped responding if i'd wake up the phone with the red button, but the others worked fine. Now, i have to try 10-20 times with any button for the touchscreen to work. The same thing happens in Windows Mobile. I just flashed to a different ROM, and the same problem occurs.
could this be a radio issue?
Well this is something that helped me, cant rly tell if my fix will work for you but try this. Drain your battery until the phone shut down on its own and then charge it fully. Do this few times and hope to god it help
i have absolutely no idea how that would work. i'm assuming you had the same problem as me?
Yes ofc it's a known problem, you can see many post about it. Touch screen wont wake up when you use end call button, its a hardware issue. Well the best solution to its to send it back for replacement, but I didn't have that option unfortunately.
but it won't wake up with any of the buttons i press, not just the end call button.

Phone crash after battery died!!

my battery was running low, (and coz poor battery issues with JPY), i didnt notice when it switched of. normally i use the power button to turn the screen on to unlock, but instead i realised the phone had been off as it was now booting up...it booted up fine went into the homescreen and then vibrated once and powered down.......now it was powering down for a long time and occasionally there were vibrations and the lights on the home keys were constantly on. the screen was black. i got home and tried to charge it but the progress bar showed no progress on charging, i tried to switch it on but it would go to startup screen vibrate cupla times and power down. so eventually had to do a hard reset in recovery mode. tried every option but in the end had todo it by wiping data.
now the thing is, is this supposed to happen? if ur battery suddenly losses power ur whole fone will screw up?
for future ref if ur battery dies dont try to switch ur fone on until u got some charge in it and use the home key to put screen on..
Sounds like it could have been faulty firmware .
JPY does not have a significant battery drain problem per se .
jje
Black screen, vibrations and no boot after restart
Hello! I had almost the same experience (Black screen after reboot and occasional vibrations) only mine refused to boot even after memory wipe and after flashing new roms.
Was your phone rooted? Because I think rooting a 2.2.1 rom (XWJS3) was the beginning of my nightmare. keep in mind that the phone was working like charm for two months. This was the second time I had a problem. The first time the phone started after performing a factory reset by itself!
In case this happens to you next time and for every non experienced galaxy player (like me) reading this:
Don't panic! Blank screen, vibrations and no boot doesn't necessarily mean a hardware problem. Finally I managed to fix it flashing eclair and repartitioning with pit512. Now I'm a happy XWJS8 user
And a question for the experts: Any clue why this happened? Is it really a rooting issue? Can a cheap Chinese battery from ebay cause this?
everything was stock on mine, no root.......maybe thats why i could recover it??!!
Maybe! and I hope the reason is faulty firmware as JJEgan says. If this is true, your phone will be fixed by the next update.
I was very urge... the same happened again. It's been a month of smooth functioning and now after a simple restart, the device doesn't boot for absolutely no reason (Stuck on black screen constantly vibrating). Since my phone wasn't rooted, and I haven't seen many people talking about a problem like this I suspect:
1. Faulty hardware (for a few devices including yours and mine)
2. A Bad app.
Contacts Vanished
Hey Everyone
Im having similar problems, i updated my sgs to the js7 version of froyo, then rooted it with oneclick method. this was as i got the phone a month ago. Its been smooth sailing since then. But last night the phone powered down and wen it loaded up it had no contacts, my sms where still there but all the apps had a force close issue none worked. so cleared the cache in recovery. Still nothing so i did a factory reset and once loaded up. i formatted the sd and internal within the settings option. So the phone was now clean. I then connected to pc luckily had backups so installed titanium restored all my apps n settings. Using kies restored my contacts n thanks to an app called sms backup i restored those.
So all was well and worked again. I didnt restore the apps i had installed within the last week to make sure it was not a faulty app. I was happy, but now tonight it did it again. No contacts again.
Pls help
Any suggestions
That's exactly how it started for me. One month after rooting froyo 2.2.1 Suddenly everything force closes and the device hard resets by itself. I reinstall all the apps and then after one month and performing a simple restart, it refuses to boot. Stays in a black screen and vibrates every some seconds. I flash a new rom but does the same. Problem solved after repartitiong and flashing original eclair with pit 512. Reflashed a 2.2.1 rom and everything works perfect (the phone now is unrooted and with a nice clear stock rom). But then after one month again (!) I realise that some videos refuse to play. Trying to restart and craaash. black screen, vibrations and no boot. Did the same again (repartitioning and flashing) and now I wait for another month to pass and lose an hour of my life to do the same again. No idea why this is happening. Is it possible that rooting messes with something that stays faulty after restoring the file system? is there an app that we all installed and caused this mess? please this is the most serious problem I've red in this forum and still a mystery. I believe this thread should be sticky and we all share similar experiences because this looks completely random!
I believe this thread should be sticky and we all share similar experiences because this looks completely random![/QUOTE]
+ 1

Categories

Resources