When I try to install recovery on the device it doesn't start on the recovery. I have unlocked the device and installed all the usb's but cant install the recovery. Why???
[email protected] said:
When I try to install recovery on the device it doesn't start on the recovery. I have unlocked the device and installed all the usb's but cant install the recovery. Why???
Click to expand...
Click to collapse
did you try " fastboot boot recovery.img" without quotes.
after you boot in to recovery immediately flash the twrp zip.
then you are good to go.
try this img file.(bootable img)
http://bit.ly/2Po1GVf
Flash this
http://bit.ly/36cvx95
Related
Hi folks,
after returned the 16gb version, i got my 32gb n7.
following the same step to root my 16gb one, i fail the root of my 32gb nexus7!
i donot why it kind of stuck in the step saying " booting the donowaled image' and just restart again. it should send me to the CWM [email protected]@
please HELP!!!!!!!!!!!!!!!!!!!! plase
fastboot OEM unlock, fastboot flash a custom recovery, flash the su binaries or a custom ROM, boot, and profit. that's all that is needed(without a toolkit). did you use a toolkit?
simms22 said:
fastboot OEM unlock, fastboot flash a custom recovery, flash the su binaries or a custom ROM, boot, and profit. that's all that is needed(without a toolkit). did you use a toolkit?
Click to expand...
Click to collapse
I succeeded to unlock the device............................ then when i flash the CWM into the device....i cannot get into the recovery mode. instead the device restart to the normal GOogle screen
seedzeng said:
I succeeded to unlock the device............................ then when i flash the CWM into the device....i cannot get into the recovery mode. instead the device restart to the normal GOogle screen
Click to expand...
Click to collapse
try twrp recovery. but cwm should work too. try booting recovery through fastboot..
fastboot boot recovery recoveryname.img
If you have installed the new boot loader latest official CWM will not work unless you flash an unofficial version (6.0.1.5 if I remember well).
Sent from my Nexus 7 using xda app-developers app
Hi everyone i flashed kings marshmallow hydrogen os but i didnt like it so i reverted back to my blisspop via nandroid backup. Unfortunately I am know stuck at the oneplus boot screen with the oneplus logo in the middle and the powered by android logo at the bottom. I am unable to boot into twrp. I was able to boot into fastboot mode and managed to flash twrp recovery however the phone will not load into recovery and goes to the oneplus boot screen. I think i softbriked or hard bricked phone because i went from kings hydrogen os which is marshamllow based to my nandroid backup which is blisspop 5.1. IDK what to do know
Bottom line i can boot into fastboot mode. device manager on my pc recognizes phone as android device- marshall london bootlooder interface any suggestions?
If you can Boot to Fastboot you have a softbrick. Somewhere around here is a thread for the recovery tool with the qualcom drivers. Read carefully and maybe give it a try.
Scherzengel said:
If you can Boot to Fastboot you have a softbrick. Somewhere around here is a thread for the recovery tool with the qualcom drivers. Read carefully and maybe give it a try.
Click to expand...
Click to collapse
Ok i thought that was for hardbrick. I will give it a try anyway
neal425 said:
Ok i thought that was for hardbrick. I will give it a try anyway
Click to expand...
Click to collapse
I installed the qualcom drivers and recovery tool, but the recovery tool doesnt do anything
neal425 said:
Hi everyone i flashed kings marshmallow hydrogen os but i didnt like it so i reverted back to my blisspop via nandroid backup. Unfortunately I am know stuck at the oneplus boot screen with the oneplus logo in the middle and the powered by android logo at the bottom. I am unable to boot into twrp. I was able to boot into fastboot mode and managed to flash twrp recovery however the phone will not load into recovery and goes to the oneplus boot screen. I think i softbriked or hard bricked phone because i went from kings hydrogen os which is marshamllow based to my nandroid backup which is blisspop 5.1. IDK what to do know
Bottom line i can boot into fastboot mode. device manager on my pc recognizes phone as android device- marshall london bootlooder interface any suggestions?
Click to expand...
Click to collapse
Do restore again. Flash 5.1.1 patch youre ok
Do you read OP.. Once you go MM you cannot go back without flashing the patch
lummujaj said:
Do restore again. Flash 5.1.1 patch youre ok
Do you read OP.. Once you go MM you cannot go back without flashing the patch
Click to expand...
Click to collapse
can you please elaborate. I have no way of getting into recovery how am i suppose to flash the patch?
Download twrp 3.0.0.0 (since you were MM ) flash it via adb... Reboot to recovery and flash the patch.. After flashin it automaticlly reboot. Than restore backup
lummujaj said:
Download twrp 3.0.0.0 (since you were MM ) flash it via adb... Reboot to recovery and flash the patch.. After flashin it automaticlly reboot. Than restore backup
Click to expand...
Click to collapse
I have done this already... the recovery will not load
lummujaj said:
Download twrp 3.0.0.0 (since you were MM ) flash it via adb... Reboot to recovery and flash the patch.. After flashin it automaticlly reboot. Than restore backup
Click to expand...
Click to collapse
i flash twrp 3.0 using fastboot flash recovery command.....
just so u know
if i type in adb devices nothing is recognized
if i type in fastboot devices my device is recognized
You cant use adb in fastboot mode.. Wtf
fastboot flash recovery recoveryname.img
fastboot boot recoveryname.img
In recovery flash the patch.. Than restore backup.. So simple. Why you complicate
Post cmd comands and results
lummujaj said:
You cant use adb in fastboot mode.. Wtf
fastboot flash recovery recoveryname.img
fastboot boot recoveryname.img
In recovery flash the patch.. Than restore backup.. So simple. Why you complicate
Post cmd comands and results
Click to expand...
Click to collapse
i did flash via fasboot after i flash it says sending recovery (okay) writing recovery (okay) than i reboot but. but when i try to reboot into recovery it does not reboot into RECOVERY it justs stuck at one plust boot screen.
Stucking 1+ logo is because having unsupported recovery from system... After you did restore did you got any error...
Get both recoveries and try command
fastboot boot recoveryname.img
One of them has to boot. Youre doing something wrong
lummujaj said:
Stucking 1+ logo is because having unsupported recovery from system... After you did restore did you got any error...
Get both recoveries and try command
fastboot boot recoveryname.img
One of them has to boot. Youre doing something wrong
Click to expand...
Click to collapse
after i did restore i did not get an error
ive tried to flash twrp 2.87 and twrp 3.0. i promise u i am flashing the recoveries correctly. each time i flash the recovery it says ok. it just wont boot into recovery after it is flashed
Did you try the coomant to boot automaticlly .. Try both recoveries
fastboot boot recoveryname.img
lummujaj said:
Did you try the coomant to boot automaticlly .. Try both recoveries
fastboot boot recoveryname.img
Click to expand...
Click to collapse
just tried that for both recoverie says downloading boot img okay. than it next thing it says remote: dtb not found
lummujaj said:
Did you try the coomant to boot automaticlly .. Try both recoveries
fastboot boot recoveryname.img
Click to expand...
Click to collapse
hey man i really appreciate you taking the time to help me out but i dont think its gonna work, im just gonna use the hardbrick method to restore my phone
Hope you will find a solution... Try firstaid from general section. I still insist about having bad recovery. Or go to op supoort site and back all to stock
I install twrp and accidentally wipe all system data there is no backup
when i install new firmware it says unknown file system osip.
when i go to recovery it says there is no os
my phone is not start?
plz help me
Just flash the rom you want. The osip thing is dosen't matter. Just flash the rom and you are golden
How to flash rom?
Magan Mittal said:
How to flash rom?
Click to expand...
Click to collapse
What kind of recovery are you using? If you are using stock recovery. Just use add sideload. If you are using TWRP. Then go to fastboot and flash the stock recovery. You can find the stock recovery in the rom downloaded from Asus : https://www.asus.com/Phone/ZenFone_5_A500CG/HelpDesk_Download/. Version 2.22.40.540 is recommended
i use twrp and adb sideload and recovery mode not working
Magan Mittal said:
i use twrp and adb sideload and recovery mode not working
Click to expand...
Click to collapse
Step 1: Flash recovery I'm via fastboot with "Fastboot flash recovery recovery.img"
Step 2: boot to recovery.
Step 3: Chose Adb sideload option in recovery.
Step 4: use command 'adb sideload (rom). zip
Guys... when i tried to flash oos 3.0 on my op2 through twrp, i first wiped the data to install new rom, then install oos 3.0, it failed. I then flashed the recovery i downloaded from the thread, then restart the recovery
I cant boot into the recovery.
System can't boot
Is it called "brick"?
So i tried to flash stock recovery in pc by command, but it says "remote: device is locked. cannot flash images". any solution to this problem?
I can boot into fastboot mode
You need to run the phone in Qualcomm mode on a PC and run the recovery tool to fix you bootloader.
I did the same and it was a royal ball ache trying to find out how to fix it
Don't do what rosswaa said
Why not?
What you should do is boot your phone into fastboot mode, connect it to your pc. Flash this modified TWRP recovery img to your phone https://www.androidfilehost.com/?fid=24459283995297945. After that you have to flash this modified SuperSU (through the new recovery) https://www.androidfilehost.com/?fid=24459283995297946.
The normal recovery doesn't work in OOS 3.0 (just like in HOS) and it's the SuperSU that gives you the soft brick. A dirty flash of the modified SuperSU should fix it.
I also had your problem and I did what rosswaa said which shouldn't be necessary (I lost all my data and backups).
I didn't lose anything, but I tried doing what you said and my bootloader was screwed so wouldn't take a flashed recovery or anything (yes the modified one)
Wish I hadnt been so excited and just flashed but all sorted now
Hmm okay, if it doesn't work with flashing the new recovery img then do what rosswaa said and after that follow this post https://forums.oneplus.net/threads/installation-instructions-faqs-oxygenos-3-0-0.439108/
Obviously try what green says first, if it works then happy days
first i am really glad that someone give some advices on me. But since i am a noob, how can i flash twrp in fastboot mode? using command? "fastboot flash recovery xxx.img"? thx
SPiCa39's said:
Guys... when i tried to flash oos 3.0 on my op2 through twrp, i first wiped the data to install new rom, then install oos 3.0, it failed. I then flashed the recovery i downloaded from the thread, then restart the recovery
I cant boot into the recovery.
System can't boot
Is it called "brick"?
So i tried to flash stock recovery in pc by command, but it says "remote: device is locked. cannot flash images". any solution to this problem?
I can boot into fastboot mode
Click to expand...
Click to collapse
1 Install official TWRP 3.x via fastboot twrp.me/devices/oneplustwo.html
Reboot to recovery
2 install this modified version of TWRP
forum.xda-developers.com/oneplus-2/development/recovery-teamwin-recovery-project-3-0-0-t3310713
Reboot to recovery
3 install oos3 (And supersu)
Sorry i can't post link
Hey friends after unroot my Lenovo a6k+ by universal unroot APK.my phone doesn't root and not install Custom recovery. Now my phone only on stock lollipop Rom.what can I do for flashed a custom roms?
akash shaky said:
Hey friends after unroot my Lenovo a6k+ by universal unroot APK.my phone doesn't root and not install Custom recovery. Now my phone only on stock lollipop Rom.what can I do for flashed a custom roms?
Click to expand...
Click to collapse
Flash this twrp recovery using adb and fastboot tool on pc.
Then flash this latest stable supersu zip through recovery.
sasukay said:
Flash this twrp recovery using adb and fastboot tool on pc.
Then flash this latest stable supersu zip through recovery.
Click to expand...
Click to collapse
I will try this many times but not work.bro???
akash shaky said:
I will try this many times but not work.bro???
Click to expand...
Click to collapse
You get stuck at which step.?
It's work.
sasukay said:
You get stuck at which step.?
Click to expand...
Click to collapse
it's work reboot into TWRP recovery but when i again pressing the vol+ and vol- and power button.so it is on stock recovery.
what can i do for permanently install TWRP Recovery.
akash shaky said:
it's work reboot into TWRP recovery but when i again pressing the vol+ and vol- and power button.so it is on stock recovery.
what can i do for permanently install TWRP Recovery.
Click to expand...
Click to collapse
First boot into twrp recovery and flash supersu zip. Then reboot into bootloader and
Use command "fastboot flash recovery recovery.img" in adb and fastboot tool for permanent flash.
its work.
sasukay said:
First boot into twrp recovery and flash supersu zip. Then reboot into bootloader and
Use command "fastboot flash recovery recovery.img" in adb and fastboot tool for permanent flash.
Click to expand...
Click to collapse
its work thanks.......