Hi everyone i flashed kings marshmallow hydrogen os but i didnt like it so i reverted back to my blisspop via nandroid backup. Unfortunately I am know stuck at the oneplus boot screen with the oneplus logo in the middle and the powered by android logo at the bottom. I am unable to boot into twrp. I was able to boot into fastboot mode and managed to flash twrp recovery however the phone will not load into recovery and goes to the oneplus boot screen. I think i softbriked or hard bricked phone because i went from kings hydrogen os which is marshamllow based to my nandroid backup which is blisspop 5.1. IDK what to do know
Bottom line i can boot into fastboot mode. device manager on my pc recognizes phone as android device- marshall london bootlooder interface any suggestions?
If you can Boot to Fastboot you have a softbrick. Somewhere around here is a thread for the recovery tool with the qualcom drivers. Read carefully and maybe give it a try.
Scherzengel said:
If you can Boot to Fastboot you have a softbrick. Somewhere around here is a thread for the recovery tool with the qualcom drivers. Read carefully and maybe give it a try.
Click to expand...
Click to collapse
Ok i thought that was for hardbrick. I will give it a try anyway
neal425 said:
Ok i thought that was for hardbrick. I will give it a try anyway
Click to expand...
Click to collapse
I installed the qualcom drivers and recovery tool, but the recovery tool doesnt do anything
neal425 said:
Hi everyone i flashed kings marshmallow hydrogen os but i didnt like it so i reverted back to my blisspop via nandroid backup. Unfortunately I am know stuck at the oneplus boot screen with the oneplus logo in the middle and the powered by android logo at the bottom. I am unable to boot into twrp. I was able to boot into fastboot mode and managed to flash twrp recovery however the phone will not load into recovery and goes to the oneplus boot screen. I think i softbriked or hard bricked phone because i went from kings hydrogen os which is marshamllow based to my nandroid backup which is blisspop 5.1. IDK what to do know
Bottom line i can boot into fastboot mode. device manager on my pc recognizes phone as android device- marshall london bootlooder interface any suggestions?
Click to expand...
Click to collapse
Do restore again. Flash 5.1.1 patch youre ok
Do you read OP.. Once you go MM you cannot go back without flashing the patch
lummujaj said:
Do restore again. Flash 5.1.1 patch youre ok
Do you read OP.. Once you go MM you cannot go back without flashing the patch
Click to expand...
Click to collapse
can you please elaborate. I have no way of getting into recovery how am i suppose to flash the patch?
Download twrp 3.0.0.0 (since you were MM ) flash it via adb... Reboot to recovery and flash the patch.. After flashin it automaticlly reboot. Than restore backup
lummujaj said:
Download twrp 3.0.0.0 (since you were MM ) flash it via adb... Reboot to recovery and flash the patch.. After flashin it automaticlly reboot. Than restore backup
Click to expand...
Click to collapse
I have done this already... the recovery will not load
lummujaj said:
Download twrp 3.0.0.0 (since you were MM ) flash it via adb... Reboot to recovery and flash the patch.. After flashin it automaticlly reboot. Than restore backup
Click to expand...
Click to collapse
i flash twrp 3.0 using fastboot flash recovery command.....
just so u know
if i type in adb devices nothing is recognized
if i type in fastboot devices my device is recognized
You cant use adb in fastboot mode.. Wtf
fastboot flash recovery recoveryname.img
fastboot boot recoveryname.img
In recovery flash the patch.. Than restore backup.. So simple. Why you complicate
Post cmd comands and results
lummujaj said:
You cant use adb in fastboot mode.. Wtf
fastboot flash recovery recoveryname.img
fastboot boot recoveryname.img
In recovery flash the patch.. Than restore backup.. So simple. Why you complicate
Post cmd comands and results
Click to expand...
Click to collapse
i did flash via fasboot after i flash it says sending recovery (okay) writing recovery (okay) than i reboot but. but when i try to reboot into recovery it does not reboot into RECOVERY it justs stuck at one plust boot screen.
Stucking 1+ logo is because having unsupported recovery from system... After you did restore did you got any error...
Get both recoveries and try command
fastboot boot recoveryname.img
One of them has to boot. Youre doing something wrong
lummujaj said:
Stucking 1+ logo is because having unsupported recovery from system... After you did restore did you got any error...
Get both recoveries and try command
fastboot boot recoveryname.img
One of them has to boot. Youre doing something wrong
Click to expand...
Click to collapse
after i did restore i did not get an error
ive tried to flash twrp 2.87 and twrp 3.0. i promise u i am flashing the recoveries correctly. each time i flash the recovery it says ok. it just wont boot into recovery after it is flashed
Did you try the coomant to boot automaticlly .. Try both recoveries
fastboot boot recoveryname.img
lummujaj said:
Did you try the coomant to boot automaticlly .. Try both recoveries
fastboot boot recoveryname.img
Click to expand...
Click to collapse
just tried that for both recoverie says downloading boot img okay. than it next thing it says remote: dtb not found
lummujaj said:
Did you try the coomant to boot automaticlly .. Try both recoveries
fastboot boot recoveryname.img
Click to expand...
Click to collapse
hey man i really appreciate you taking the time to help me out but i dont think its gonna work, im just gonna use the hardbrick method to restore my phone
Hope you will find a solution... Try firstaid from general section. I still insist about having bad recovery. Or go to op supoort site and back all to stock
Related
Installed a rom,when i press restart, asked me something about stock recovery and i press "no".Now i have no any recovery-stock or CWM for flash the rom again.the phone is working,its booting,but with some isuues and i want to flash it again.I have a fastboot mode but in recovery its give me just the green android with red triangle .help me please...
oska3 said:
Installed a rom,when i press restart, asked me something about stock recovery and i press "no".Now i have no any recovery-stock or CWM for flash the rom again.the phone is working,its booting,but with some isuues and i want to flash it again.I have a fastboot mode but in recovery its give me just the green android with red triangle .help me please...
Click to expand...
Click to collapse
you probably originally flashed your recovery in a root toolbox, no? if you did, you didn't flash it, you booted it. that's different. the android laying there, IS the stock recovery. all you need to do is flash your recovery via fastboot or by using the flashify app from your phone to flash it.
to flash a recovery via fastboot..
fastboot flash recovery recoveryname.img
to boot(not flash) a recovery..
fastboot boot recovery recoveryname.img
maybe you are right for the toolbox,i have no memories for that.which 1 is more safety?can you post some links or more info for to how...
oska3 said:
maybe you are right for the toolbox,i have no memories for that.which 1 is more safety?can you post some links or more info for to how...
Click to expand...
Click to collapse
safest is doing it the right way. and once its learned, its easier tgan a toolkit. but for booting or fladhing it doesnt mattter. if you flash it, it replaces the stock bootloader, so yoh can always go into a custom recovery at any time. booting it is only for a one time use. after you boot up, your stock recovery is back. and youd have to boot it evety time youd want to flash something, but you keep stock recovery.
Guys... when i tried to flash oos 3.0 on my op2 through twrp, i first wiped the data to install new rom, then install oos 3.0, it failed. I then flashed the recovery i downloaded from the thread, then restart the recovery
I cant boot into the recovery.
System can't boot
Is it called "brick"?
So i tried to flash stock recovery in pc by command, but it says "remote: device is locked. cannot flash images". any solution to this problem?
I can boot into fastboot mode
You need to run the phone in Qualcomm mode on a PC and run the recovery tool to fix you bootloader.
I did the same and it was a royal ball ache trying to find out how to fix it
Don't do what rosswaa said
Why not?
What you should do is boot your phone into fastboot mode, connect it to your pc. Flash this modified TWRP recovery img to your phone https://www.androidfilehost.com/?fid=24459283995297945. After that you have to flash this modified SuperSU (through the new recovery) https://www.androidfilehost.com/?fid=24459283995297946.
The normal recovery doesn't work in OOS 3.0 (just like in HOS) and it's the SuperSU that gives you the soft brick. A dirty flash of the modified SuperSU should fix it.
I also had your problem and I did what rosswaa said which shouldn't be necessary (I lost all my data and backups).
I didn't lose anything, but I tried doing what you said and my bootloader was screwed so wouldn't take a flashed recovery or anything (yes the modified one)
Wish I hadnt been so excited and just flashed but all sorted now
Hmm okay, if it doesn't work with flashing the new recovery img then do what rosswaa said and after that follow this post https://forums.oneplus.net/threads/installation-instructions-faqs-oxygenos-3-0-0.439108/
Obviously try what green says first, if it works then happy days
first i am really glad that someone give some advices on me. But since i am a noob, how can i flash twrp in fastboot mode? using command? "fastboot flash recovery xxx.img"? thx
SPiCa39's said:
Guys... when i tried to flash oos 3.0 on my op2 through twrp, i first wiped the data to install new rom, then install oos 3.0, it failed. I then flashed the recovery i downloaded from the thread, then restart the recovery
I cant boot into the recovery.
System can't boot
Is it called "brick"?
So i tried to flash stock recovery in pc by command, but it says "remote: device is locked. cannot flash images". any solution to this problem?
I can boot into fastboot mode
Click to expand...
Click to collapse
1 Install official TWRP 3.x via fastboot twrp.me/devices/oneplustwo.html
Reboot to recovery
2 install this modified version of TWRP
forum.xda-developers.com/oneplus-2/development/recovery-teamwin-recovery-project-3-0-0-t3310713
Reboot to recovery
3 install oos3 (And supersu)
Sorry i can't post link
Hi, I got a friend's Moto X Pure which as he tells me just stopped working. It was last running AICP 7.1, the phone freezes on the Motorola logo, and when you try to boot to recovery it freezes on the TWRP logo.
I flashed a new recovery over fastboot, still freezes.
Any idea what could be the issue here? Thanks!
Did he or u do a an official backup through I think called adb or fastboot? From the computer.
Hitti2 said:
Did he or u do a an official backup through I think called adb or fastboot? From the computer.
Click to expand...
Click to collapse
No, I've downloaded the stock firmware and I'll try to flash it through fastboot to see what happens.
Have you tried just booting TWRP with 'fastboot boot recovery.img' instead of flashing and starting it? (replace recovery.img with the name of your TWRP image file)
acejavelin said:
Have you tried just booting TWRP with 'fastboot boot recovery.img' instead of flashing and starting it? (replace recovery.img with the name of your TWRP image file)
Click to expand...
Click to collapse
Thanks for the suggestion, I'll give it a shot
Wanted to flash a new ROM, so did a full wipe. Now when I tried to flash the ROM it says need twrp 3.1.x
So rebooted into fastboot and flashed latest twrp.
Now I can't reboot to recovery also NO OS too.
Tried the manual method holding power+volume up it just boots up gets stuck in bootlogo.
Any kinda help would be appreciated.
You know you can just do fastboot boot (blabla).img, right?
All you need is to put your phone into fastboot and the fastboot tool that you get when downloading adb.
NathanBrake said:
You know you can just do fastboot boot (blabla).img, right?
All you need is to put your phone into fastboot and the fastboot tool that you get when downloading adb.
Click to expand...
Click to collapse
Yea that worked.
Hi
I have fasboot nougat and trying to twrp and root, but after flashing twrp(2.8.7 or the newest 3.1.2) and go to recovery im stuck with android logo and no command. than i tap vol up but nothing happens and phone reboot.
any suggestions from u guys?
y\thx in advance
After flashing twrp you cannot reboot system
fastboot flash recovery twrp3.+.img
OK
Vol± recovery mode, power.
3.2.x - better are 3.0.2 & 3.1.1 i think. @the-light
dzidexx said:
After flashing twrp you cannot reboot system
fastboot flash recovery twrp3.+.img
OK
Vol± recovery mode, power.
3.2.x - better are 3.0.2 & 3.1.1 i think. @the-light
Click to expand...
Click to collapse
thx for reply
I have tried several twrp ver. non works for some reason.
For sure:
Bootloader unlocked?
What is status code in BL/fastboot mode? @the-light
dzidexx said:
For sure:
Bootloader unlocked?
What is status code in BL/fastboot mode? @the-light
Click to expand...
Click to collapse
After several attempts, sorted it, now rooted :} many thx
the-light said:
After several attempts, sorted it, now rooted :} many thx
Click to expand...
Click to collapse
What'd you end up doing? Mine is stuck on the TWRP splash screen as well, no matter what version of TWRP I try and fastboot into (fastboot boot, or fastboot flash).
After flashing twrp do not reboot, t tap v+ to recovery