Related
Hey guys, I'm working on a Ubuntu port to my a500 but I can't seem to get my wireless keyboard to work. I have a combo wireless keyboard and mouse that works off of one usb plug; the mouse works but the keyboard won't type anything. It's a logitech mk320. Any help is appreciated-
Thanks
Im using a Logitech MK220 wireless combo with no problems at all. Mouse and keyboard with a single usb dongle. See if it works on your pc if you havent, check batteries and stuff.
ickata said:
Im using a Logitech MK220 wireless combo with no problems at all. Mouse and keyboard with a single usb dongle. See if it works on your pc if you havent, check batteries and stuff.
Click to expand...
Click to collapse
Well, it does work on pc, I'm typing with it right now. I just bought it- batteries are fine. Like I said, mouse works on tablet but not the keyboard... any other ideas?
sorry not sure if u already fixed ur issue but I just bought a MK220 and it works fine with my N8010 . tips: restart the andorid while the logitech reciever is plugged in. if it doesnt work for some odd reason, take out the batteries of the mouse and plug in the reciever and restart. (this will not pair the mouse)
hope it works,
Hi Guys,
I've installed the USB/BT Joystick Center GOLD app and purchased a USB BT CSR4.0 dongle, which connects ok to my S4 on Android 4.4.2
I can pair the wii remote, and bind the keys perfectly (after some playing around).
I run the game ( Halls of Fear VR for instance ) and i can move around, do what I want, but after about 1 minute the wii remote flashes as if its lost connection and then turns off.
I go back into the Joystick center, but I am unable to pair the controller until I remove the dongle and re-attach it, when I do this, i can then repeat the orignal steps and get about 1 more minute of gameplay.
Is this a setting in android for making the dongle "sleep" after a certain amount of time?
Any help would be appreciated.. as im desperate to be scared out of my mind in the world of VR!
I had the same problem and the only way that I found to fix it was replacing my non-powered usb hub with an AC powered one.
Just be sure that AC Adapter must be 2A (2000mA) or higher.
Hello everybody yesterday i received my mojo. Console Works great but the control don't pair with the usb dongle in de mojo. PC and MAC recognise the usb but don´t pair..
However the control pairs perfect without using dongle in Galaxy s4, with the dongle don´t work. Any suggestion? There are any bt dongle compatible with mojo and ctrlr?
Thanks in advance. Regards!
davirofe said:
Hello everybody yesterday i received my mojo. Console Works great but the control don't pair with the usb dongle in de mojo. PC and MAC recognise the usb but don´t pair..
Click to expand...
Click to collapse
If I understand you correctly, make sure the BT dongle included with the mojo is on the USB3 (blue) port.
Try turning BT on in android setup.. not sure why that would help, but just in case there's been an update..
davirofe said:
However the control pairs perfect without using dongle in Galaxy s4, with the dongle don´t work. Any suggestion? There are any bt dongle compatible with mojo and ctrlr?
Thanks in advance. Regards!
Click to expand...
Click to collapse
If that didn't work, raise a support request with madcatz, probably a busted USB Dongle, (it should work fine on PC/android/ect, MAC i think might need drivers)
You can pair the mojo CTRLR to your galaxy without the dongle?? wow!
Man, I'm hoping it's a firmware fix coming
Also: There are any bt dongle compatible with mojo and ctrlr?
TMK, The dongle isn't actually BT, so I doubt there would be an alternative out there.
gwaldo said:
If I understand you correctly, make sure the BT dongle included with the mojo is on the USB3 (blue) port.
Try turning BT on in android setup.. not sure why that would help, but just in case there's been an update..
If that didn't work, raise a support request with madcatz, probably a busted USB Dongle, (it should work fine on PC/android/ect, MAC i think might need drivers)
You can pair the mojo CTRLR to your galaxy without the dongle?? wow!
Man, I'm hoping it's a firmware fix coming
Also: There are any bt dongle compatible with mojo and ctrlr?
TMK, The dongle isn't actually BT, so I doubt there would be an alternative out there.
Click to expand...
Click to collapse
Yes, i plug the dongle on the USB3 of the mojo, but the controller doesn't pair.
Turning on the Bluetooth of the mojo doesn't detect the controller
in galaxy s4 with stock kitkat and without dongle the controller pair and works fine.
If i power off the bt on sgs4 and connect the dongle with otg USB phone detect new keyboard connected but controller doesn't pair.
Only pair without dongle and with bt 4.0 devices....... I'm confused.
Thanks for you answer man!
davirofe said:
Yes, i plug the dongle on the USB3 of the mojo, but the controller doesn't pair.
Turning on the Bluetooth of the mojo doesn't detect the controller
in galaxy s4 with stock kitkat and without dongle the controller pair and works fine.
If i power off the bt on sgs4 and connect the dongle with otg USB phone detect new keyboard connected but controller doesn't pair.
Only pair without dongle and with bt 4.0 devices....... I'm confused.
Thanks for you answer man!
Click to expand...
Click to collapse
What model# is it?
My MOJO CTRLR is 32263 and my the retail CTRLR : 32266.
Maybe different firmware, I would raise a ticket with Madcatz, with a link to this thread.
"If i power off the bt on sgs4 and connect the dongle with otg USB phone detect new keyboard connected but controller doesn't pair."
Is that with the MOJO dongle, it works with a BT4 keyboard?
I hope it's a new firmware release for both CTRLR and MOJO :fingers-crossed:
Does the blue light come on the CTRLR?
Try holding down the start button for a few seconds, the light should go red'ish then try to repair.
That's very strange, did you check that both USB ports on the MOJO work?
I'm guessing it's a firmware issue or a dongle issue.
gwaldo said:
What model# is it?
My MOJO CTRLR is 32263 and my the retail CTRLR : 32266.
Maybe different firmware, I would raise a ticket with Madcatz, with a link to this thread.
"If i power off the bt on sgs4 and connect the dongle with otg USB phone detect new keyboard connected but controller doesn't pair."
Is that with the MOJO dongle, it works with a BT4 keyboard?
I hope it's a new firmware release for both CTRLR and MOJO :fingers-crossed:
Does the blue light come on the CTRLR?
Try holding down the start button for a few seconds, the light should go red'ish then try to repair.
That's very strange, did you check that both USB ports on the MOJO work?
I'm guessing it's a firmware issue or a dongle issue.
Click to expand...
Click to collapse
My controller is the same
The CTRLR DONGLE is :43710
When i connect the dongle of the mojo to the phone detect new keyboard, but nothing works, controller doesn't pair and i don't try with bt keyboard. I think dongle fail...,
When pair without dongle to S4 the light is blue and works well
When i try the same with the dongle in the mojo, pc or Mac reconigse the dongle well(drivers install perfect) but the light of the controller is blinking red/blue and doesn't works
If i press start button 5 seg light change purple and after blink again red/blue (pair mode) but doesn't pair
The USB ports of the mojo also well fine i plug Xbox 360 controller and mouse to set up the system
Thanks for your help!
davirofe said:
My controller is the same
The CTRLR DONGLE is :43710
When i connect the dongle of the mojo to the phone detect new keyboard, but nothing works, controller doesn't pair and i don't try with bt keyboard. I think dongle fail...,
When pair without dongle to S4 the light is blue and works well
When i try the same with the dongle in the mojo, pc or Mac reconigse the dongle well(drivers install perfect) but the light of the controller is blinking red/blue and doesn't works
If i press start button 5 seg light change purple and after blink again red/blue (pair mode) but doesn't pair
The USB ports of the mojo also well fine i plug Xbox 360 controller and mouse to set up the system
Thanks for your help!
Click to expand...
Click to collapse
My dongle model is the same.. strange that it still works on PC/Mac (loading drivers) :/ dont know sorry...
Even with a BT4 USB adaptor, I doubt it would work on the MOJO because android 4.3 doesn't support BT4.
Raise a support ticket on the madcatz site.
that's a bummer, hope you get it fixed soo.
Same Problem here, Mojo paired with my phone but not with the controller. But the Controller works fine with my Nexus 5.
Same problem here. MOJO support doesn't seem to be much help other than disconnect it and reconnect but I can't even get it to pair. Anyone found resolution for this?
I also have the same problem, would installing a lower firmware help?, mine came with the 4k res and ouya update out of box, if I install lower firmware would that solve my dongle problem?
Thanks
laywaste said:
I also have the same problem, would installing a lower firmware help?, mine came with the 4k res and ouya update out of box, if I install lower firmware would that solve my dongle problem?
Thanks
Click to expand...
Click to collapse
No, don't bother.
FYI: @Coolin82 @rmraiden
TMK, the only thing you can do is install the lollypop custom rom, it doesn't need the dongle and pairs fine without it.
See the development forum.
Wow! That's really strange, I use the dongle on my PC(linux/XP) and mojo.. never had issues it, it just works.
Mine is now working. Mad Catz RMA'd my controller and sent me the new CTRL that doesn't require a dongle. Gaming is so much better now!! :laugh:
Oh nice, you got a retail version.. it has BT2 and BT4 that's why you don't need the dongle.
any solution ?
My Zenfone max pro m1 recognises USB drives like thumb drives and a 1TB HDD no problem and also my wireless keyboard mouse combo but it just doesn't seem to recognise my generic wired gamepad, no power when I press the analog switch no red led. I was planning to try out PUBG mobile using gamepad through the Octopus app, unfortunately to my surprise it was not able to detect my device, on the other hand it easily detected my mouse and keyboard and I was able to use them to play PUBG. However it's not about PUBG it's more about me now not being able to use my gamepad for PPSSPP ?
Deeptesh Basak said:
My Zenfone max pro m1 recognises USB drives like thumb drives and a 1TB HDD no problem and also my wireless keyboard mouse combo but it just doesn't seem to recognise my generic wired gamepad, no power when I press the analog switch no red led. I was planning to try out PUBG mobile using gamepad through the Octopus app, unfortunately to my surprise it was not able to detect my device, on the other hand it easily detected my mouse and keyboard and I was able to use them to play PUBG. However it's not about PUBG it's more about me now not being able to use my gamepad for PPSSPP ?
Click to expand...
Click to collapse
I could be due to many reasons.
Firstly tell me this does your mobile detect the wired gamepad as a peripheral device connection?
Check in settings > connected devices.
If not, then test out if a wired keyboard gets connected to you mobile. If the keyboard does get connected and your wired gamepad doesn't, it means your wired gamepad isn't compatible.
Keep in mind this troubleshooting is between your mobile and peripheral devices..
Octopus app connection comes later.
Deeptesh Basak said:
My Zenfone max pro m1 recognises USB drives like thumb drives and a 1TB HDD no problem and also my wireless keyboard mouse combo but it just doesn't seem to recognise my generic wired gamepad, no power when I press the analog switch no red led. I was planning to try out PUBG mobile using gamepad through the Octopus app, unfortunately to my surprise it was not able to detect my device, on the other hand it easily detected my mouse and keyboard and I was able to use them to play PUBG. However it's not about PUBG it's more about me now not being able to use my gamepad for PPSSPP
Click to expand...
Click to collapse
It seems to be all zenfone MPM1 users have the same issue. Wirless gamepads works as usual but not wired gamepad.
Jaheen said:
It seems to be all zenfone MPM1 users have the same issue. Wirless gamepads works as usual but not wired gamepad.
Click to expand...
Click to collapse
No my device simply DOES NOT detect my wired gamepad. It detects my keyboard and mouse no problem, also much power hogging 1TB HDD but I'm having no luck with my gamepad. The gamepad works fine with other phones and my laptop.
StoneSpider said:
I could be due to many reasons.
Firstly tell me this does your mobile detect the wired gamepad as a peripheral device connection?
Check in settings > connected devices.
If not, then test out if a wired keyboard gets connected to you mobile. If the keyboard does get connected and your wired gamepad doesn't, it means your wired gamepad isn't compatible.
Keep in mind this troubleshooting is between your mobile and peripheral devices..
Octopus app connection comes later.
Click to expand...
Click to collapse
No my device simply DOES NOT detect my wired gamepad. It detects my keyboard and mouse no problem, also much power hogging 1TB HDD but I'm having no luck with my gamepad. The gamepad works fine with other phones and my laptop.
Deeptesh Basak said:
No my device simply DOES NOT detect my wired gamepad. It detects my keyboard and mouse no problem, also much power hogging 1TB HDD but I'm having no luck with my gamepad. The gamepad works fine with other phones and my laptop.
Click to expand...
Click to collapse
That is what I'm telling you my brother, mobile not detecting wired gamepad alone. But the rest works well.
Wired controller not working in zenfone mpm1
I have gamesir g3w wired controller, it works just fine in my zenfone 3 lazer, but not in my MPM1. Therfore i conclude that Zenfone max pro m1 doesnt support wired controller. Please include fixing this in your nxt update. there are lots of advantage in using wired controller, thats why some user choosing it..
Same ISSUE
I am also facing same issue bro
Wired Mouse and Pendrive trough USB OTG gets detected thought it prompts for reverse charging alert
Same alert is shown while connecting my Game-Pad but it does not show any response and not detected in Octopus app too.
Kindly Requesting Asus to fix this issue ASAP
I have an AT&T Galaxy S10+. I connected a wired Xbox 360 controller to it using the OTG connector that came with it and I can't get the controller to work. The lights around the Xbox button blink but there doesn't seem to be any input. Any ideas? This should work, right?
Ive had the same experience. Noticed on fortnite that with otg cable it wouldnt register the right analog. Using it as bluetooth device works fine tho
Opie Knievel said:
I have an AT&T Galaxy S10+. I connected a wired Xbox 360 controller to it using the OTG connector that came with it and I can't get the controller to work. The lights around the Xbox button blink but there doesn't seem to be any input. Any ideas? This should work, right?
Click to expand...
Click to collapse
Hi. I have the same problem with the ps4 gamepad, I coming from an Sony Xperia phone and all easy to play emulators and general games, but with this device it's recognized the gamepad, but when I go to the option to reassign the buttons it doesn't work.
https://forum.xda-developers.com/galaxy-s10/help/ps4-gamepad-samsung-galaxy-s10-t3912223
This is my original post if somebody could help.