Hello everybody yesterday i received my mojo. Console Works great but the control don't pair with the usb dongle in de mojo. PC and MAC recognise the usb but don´t pair..
However the control pairs perfect without using dongle in Galaxy s4, with the dongle don´t work. Any suggestion? There are any bt dongle compatible with mojo and ctrlr?
Thanks in advance. Regards!
davirofe said:
Hello everybody yesterday i received my mojo. Console Works great but the control don't pair with the usb dongle in de mojo. PC and MAC recognise the usb but don´t pair..
Click to expand...
Click to collapse
If I understand you correctly, make sure the BT dongle included with the mojo is on the USB3 (blue) port.
Try turning BT on in android setup.. not sure why that would help, but just in case there's been an update..
davirofe said:
However the control pairs perfect without using dongle in Galaxy s4, with the dongle don´t work. Any suggestion? There are any bt dongle compatible with mojo and ctrlr?
Thanks in advance. Regards!
Click to expand...
Click to collapse
If that didn't work, raise a support request with madcatz, probably a busted USB Dongle, (it should work fine on PC/android/ect, MAC i think might need drivers)
You can pair the mojo CTRLR to your galaxy without the dongle?? wow!
Man, I'm hoping it's a firmware fix coming
Also: There are any bt dongle compatible with mojo and ctrlr?
TMK, The dongle isn't actually BT, so I doubt there would be an alternative out there.
gwaldo said:
If I understand you correctly, make sure the BT dongle included with the mojo is on the USB3 (blue) port.
Try turning BT on in android setup.. not sure why that would help, but just in case there's been an update..
If that didn't work, raise a support request with madcatz, probably a busted USB Dongle, (it should work fine on PC/android/ect, MAC i think might need drivers)
You can pair the mojo CTRLR to your galaxy without the dongle?? wow!
Man, I'm hoping it's a firmware fix coming
Also: There are any bt dongle compatible with mojo and ctrlr?
TMK, The dongle isn't actually BT, so I doubt there would be an alternative out there.
Click to expand...
Click to collapse
Yes, i plug the dongle on the USB3 of the mojo, but the controller doesn't pair.
Turning on the Bluetooth of the mojo doesn't detect the controller
in galaxy s4 with stock kitkat and without dongle the controller pair and works fine.
If i power off the bt on sgs4 and connect the dongle with otg USB phone detect new keyboard connected but controller doesn't pair.
Only pair without dongle and with bt 4.0 devices....... I'm confused.
Thanks for you answer man!
davirofe said:
Yes, i plug the dongle on the USB3 of the mojo, but the controller doesn't pair.
Turning on the Bluetooth of the mojo doesn't detect the controller
in galaxy s4 with stock kitkat and without dongle the controller pair and works fine.
If i power off the bt on sgs4 and connect the dongle with otg USB phone detect new keyboard connected but controller doesn't pair.
Only pair without dongle and with bt 4.0 devices....... I'm confused.
Thanks for you answer man!
Click to expand...
Click to collapse
What model# is it?
My MOJO CTRLR is 32263 and my the retail CTRLR : 32266.
Maybe different firmware, I would raise a ticket with Madcatz, with a link to this thread.
"If i power off the bt on sgs4 and connect the dongle with otg USB phone detect new keyboard connected but controller doesn't pair."
Is that with the MOJO dongle, it works with a BT4 keyboard?
I hope it's a new firmware release for both CTRLR and MOJO :fingers-crossed:
Does the blue light come on the CTRLR?
Try holding down the start button for a few seconds, the light should go red'ish then try to repair.
That's very strange, did you check that both USB ports on the MOJO work?
I'm guessing it's a firmware issue or a dongle issue.
gwaldo said:
What model# is it?
My MOJO CTRLR is 32263 and my the retail CTRLR : 32266.
Maybe different firmware, I would raise a ticket with Madcatz, with a link to this thread.
"If i power off the bt on sgs4 and connect the dongle with otg USB phone detect new keyboard connected but controller doesn't pair."
Is that with the MOJO dongle, it works with a BT4 keyboard?
I hope it's a new firmware release for both CTRLR and MOJO :fingers-crossed:
Does the blue light come on the CTRLR?
Try holding down the start button for a few seconds, the light should go red'ish then try to repair.
That's very strange, did you check that both USB ports on the MOJO work?
I'm guessing it's a firmware issue or a dongle issue.
Click to expand...
Click to collapse
My controller is the same
The CTRLR DONGLE is :43710
When i connect the dongle of the mojo to the phone detect new keyboard, but nothing works, controller doesn't pair and i don't try with bt keyboard. I think dongle fail...,
When pair without dongle to S4 the light is blue and works well
When i try the same with the dongle in the mojo, pc or Mac reconigse the dongle well(drivers install perfect) but the light of the controller is blinking red/blue and doesn't works
If i press start button 5 seg light change purple and after blink again red/blue (pair mode) but doesn't pair
The USB ports of the mojo also well fine i plug Xbox 360 controller and mouse to set up the system
Thanks for your help!
davirofe said:
My controller is the same
The CTRLR DONGLE is :43710
When i connect the dongle of the mojo to the phone detect new keyboard, but nothing works, controller doesn't pair and i don't try with bt keyboard. I think dongle fail...,
When pair without dongle to S4 the light is blue and works well
When i try the same with the dongle in the mojo, pc or Mac reconigse the dongle well(drivers install perfect) but the light of the controller is blinking red/blue and doesn't works
If i press start button 5 seg light change purple and after blink again red/blue (pair mode) but doesn't pair
The USB ports of the mojo also well fine i plug Xbox 360 controller and mouse to set up the system
Thanks for your help!
Click to expand...
Click to collapse
My dongle model is the same.. strange that it still works on PC/Mac (loading drivers) :/ dont know sorry...
Even with a BT4 USB adaptor, I doubt it would work on the MOJO because android 4.3 doesn't support BT4.
Raise a support ticket on the madcatz site.
that's a bummer, hope you get it fixed soo.
Same Problem here, Mojo paired with my phone but not with the controller. But the Controller works fine with my Nexus 5.
Same problem here. MOJO support doesn't seem to be much help other than disconnect it and reconnect but I can't even get it to pair. Anyone found resolution for this?
I also have the same problem, would installing a lower firmware help?, mine came with the 4k res and ouya update out of box, if I install lower firmware would that solve my dongle problem?
Thanks
laywaste said:
I also have the same problem, would installing a lower firmware help?, mine came with the 4k res and ouya update out of box, if I install lower firmware would that solve my dongle problem?
Thanks
Click to expand...
Click to collapse
No, don't bother.
FYI: @Coolin82 @rmraiden
TMK, the only thing you can do is install the lollypop custom rom, it doesn't need the dongle and pairs fine without it.
See the development forum.
Wow! That's really strange, I use the dongle on my PC(linux/XP) and mojo.. never had issues it, it just works.
Mine is now working. Mad Catz RMA'd my controller and sent me the new CTRL that doesn't require a dongle. Gaming is so much better now!! :laugh:
Oh nice, you got a retail version.. it has BT2 and BT4 that's why you don't need the dongle.
any solution ?
Related
Hi updated my tab with the official update.zip found here and now i'm under 3.1, but if i connect my PS3 pads they just charge and i can't get them to work with Snesoid or in the homescreens like i saw in a bunch of videos from Xoom and Transformers.
There's a workaround or the A500 version of 3.1 lacks of this feature (it would be very disappointing)?
DJ_Jedi said:
Hi updated my tab with the official update.zip found here and now i'm under 3.1, but if i connect my PS3 pads they just charge and i can't get them to work with Snesoid or in the homescreens like i saw in a bunch of videos from Xoom and Transformers.
There's a workaround or the A500 version of 3.1 lacks of this feature (it would be very disappointing)?
Click to expand...
Click to collapse
i have the same problem
or they use a third part things to make them able to play...
Did you go into Settings _> Language & Input -> Keyboard Settings ->
Configure Input Devices and turn on the PS3 Controller
then back and
Current Input Method and choose the PS3 controller
I know I have to do something similar for the WiiControllerIME
MurderCity420 said:
Did you go into Settings _> Language & Input -> Keyboard Settings ->
Configure Input Devices and turn on the PS3 Controller
then back and
Current Input Method and choose the PS3 controller
I know I have to do something similar for the WiiControllerIME
Click to expand...
Click to collapse
Thanks, but no luck, it doesn't see the controller. I think i'll mail Acer to ask about this.
EDIT: just tried a wireless mouse, it works like a charm. I think they have dropped the controller drivers
DJ_Jedi said:
Thanks, but no luck, it doesn't see the controller. I think i'll mail Acer to ask about this.
EDIT: just tried a wireless mouse, it works like a charm. I think they have dropped the controller drivers
Click to expand...
Click to collapse
i plan to try my madcatz ps3 fightpad tonight, it's wireless with a dongle.
if i remember correctly, 3.1's gamepad support is for usb hid gamepads. the bluetooth ps3 pads may require a bit more to just work.
But i connected it via USB, not with bluetooth. I dont have different pads, just 2 PS3 ones, but i dont understand why on Xoom and Transformers they works and on A500 not.
I could be wrong, but pretty sure using the USB cord with factory ps3 controllers does not make them USB controllers! The USB is ONLY for charging ps3 controllers. They are bluetooth 100% of the time(mine are this way). And just as the way you use them with ps3, they must be synced to work.
My advice, just get a cheap USB controller, maybe even one for windows PC. They are usually around $5. Or find a knockoff ps3 controller found on many of the chinese sites for about the same money...should work till BT PS3 controller is sorted.
oasisautospa said:
I could be wrong, but pretty sure using the USB cord with factory ps3 controllers does not make them USB controllers! The USB is ONLY for charging ps3 controllers.
Click to expand...
Click to collapse
You're wrong. On windows they work with USB cable.
They work USB on PS3 too, for example when they are in charge or you enter in recovery mode.
More sixaxis and DS3 work with Xoom and Transformers (in a video the guy says: "you just need to connect and press the PS button").
Agosh13 said:
You're wrong. On windows they work with USB cable.
Click to expand...
Click to collapse
Out of the box, the PS3 controllers are charge-only over USB. You have to use a third-party driver to use the PS3 controller over USB on a PC. The only console controller drivers built-in to Windows OS are for the XBox controllers (for obvious reasons).
Even on the PS3 system, if you plug the controller in to the USB ports while playing, it will use Bluetooth if it's available. If for some reason Bluetooth is not available then the PS3 will resort to USB as if it was a PS2 controller, but you won't have the full PS3 controller functionality (which is why Sony has it default to Bluetooth whenever possible).
But on Honeycomb 3.1 they probably embeded the driver because on the other 2 it works out of the box.
I have a retrolink USB nes game pad that I was going to try with Nesoid. The buttons work in menus and such, but the direction pad does not
The buttons don't seem to return any particular key press, so it doesn't seem mappable.
Sent from my A500 using XDA Premium App
Just did some more testing with a few more USB devices I had laying around. My saitek joystick lets me navigate menus and button presses will do things like open programs, it doesn't seem to work in nesoid. I have an old nostromo n50 game pad, the kind you rest your left hand on. It works perfect with nesoid.
Sent from my A500 using XDA Premium App
i have 3 sixaxis and 2 dual shocks and neither work. i'll try a third party ps3 nyko controller next i guess.
internetpilot said:
Out of the box, the PS3 controllers are charge-only over USB. You have to use a third-party driver to use the PS3 controller over USB on a PC. The only console controller drivers built-in to Windows OS are for the XBox controllers (for obvious reasons).
Even on the PS3 system, if you plug the controller in to the USB ports while playing, it will use Bluetooth if it's available. If for some reason Bluetooth is not available then the PS3 will resort to USB as if it was a PS2 controller, but you won't have the full PS3 controller functionality (which is why Sony has it default to Bluetooth whenever possible).
Click to expand...
Click to collapse
NO. The controller can work with bluetooth or with USB. There aren't charge only over USB.
OTG cable doesnt make a difference either-. Nio micro usb support. For my ps3 controller.
I want to know why on Transformers and Xoom the DS3 works...
no luck on nyko zero ps3 controller either, though its junk anyway.
i wish i had wired xbox 360 controllers but i only have those in wireless
Agosh13 said:
NO. The controller can work with bluetooth or with USB. There aren't charge only over USB.
Click to expand...
Click to collapse
When using a PS3 controller with a PS3 system, it will use bluetooth connectivity whenever possible. If for some reason a controller will not sync with the PS3, you can get it to connect over USB, but that's not the preferred/default method. You can easily see this to be true when you're playing a game while charging your controller via USB. Unplug the USB cable -- did your controller lose connectivity? No, because it was always connected via bluetooth. Otherwise, if it lost USB connectivity it would have to reconnect via bluetooth when you disconnected the cable.
As for the PS3 controller on other devices via USB or bluetooth, to the best of my knowledge every single device requires drivers. This includes Android v3.1 devices -- some of them just have the driver built-in to their ROM. Apparently, Acer did not include that.
I recently got an XBOX 360 controller to try to get it working with my Nexus 10 however it is not recognizing the controller. The controller itself is a XBOX 360 controller with a USB charging adapter. Since I don't have the USB wireless receiver I'm trying to get the controller to be recognized through the USB cable. Thus I have connected the USB to an OTG cable. When I hit the synch button it continually flashes but does not synch. Is there something I need to do to my N10 to get it to properly recognize the controller? Drivers or rooting etc???
My Nexus 10 is currently stock Android 4.2, so I'm not sure if that makes a difference, it has NOT been rooted yet.
Thanks
mikegonzalez2k said:
I recently got an XBOX 360 controller to try to get it working with my Nexus 10 however it is not recognizing the controller. The controller itself is a XBOX 360 controller with a USB charging adapter. Since I don't have the USB wireless receiver I'm trying to get the controller to be recognized through the USB cable. Thus I have connected the USB to an OTG cable. When I hit the synch button it continually flashes but does not synch. Is there something I need to do to my N10 to get it to properly recognize the controller? Drivers or rooting etc???
My Nexus 10 is currently stock Android 4.2, so I'm not sure if that makes a difference, it has NOT been rooted yet.
Thanks
Click to expand...
Click to collapse
Has to be a wired 360 controller. As far as i know the wireless model still connects wirelessly even when plugged in with a 360.
The wired controller is working great for me in GTA vice city though.
mikegonzalez2k said:
I recently got an XBOX 360 controller to try to get it working with my Nexus 10 however it is not recognizing the controller. The controller itself is a XBOX 360 controller with a USB charging adapter. Since I don't have the USB wireless receiver I'm trying to get the controller to be recognized through the USB cable. Thus I have connected the USB to an OTG cable. When I hit the synch button it continually flashes but does not synch. Is there something I need to do to my N10 to get it to properly recognize the controller? Drivers or rooting etc???
My Nexus 10 is currently stock Android 4.2, so I'm not sure if that makes a difference, it has NOT been rooted yet.
Thanks
Click to expand...
Click to collapse
the wireless 360 controller does work on a N10, but you need the XBOX 360 Wireless Receiver and your OTG cable. unfortunately this setup is not supported by any of the games i've tried. vice city for instance does not even have a deadzone setting for the wireless controller and the button mappings are all over the place, whereas everything is preconfigured for the wired version.
mista.maja said:
the wireless 360 controller does work on a N10, but you need the XBOX 360 Wireless Receiver and your OTG cable. unfortunately this setup is not supported by any of the games i've tried. vice city for instance does not even have a deadzone setting for the wireless controller and the button mappings are all over the place, whereas everything is preconfigured for the wired version.
Click to expand...
Click to collapse
Yeah, the wireless receiver is essential. The n10 doesn't have a key map for wireless Xbox controllers, which is why they don't work with most games. But if you've rooted it's easy to get it all working. See this thread from the n7 forum, same process applies to the n10. Been playing GTA Vice City with a wireless controller, works like a charm.
Quonith said:
Yeah, the wireless receiver is essential. The n10 doesn't have a key map for wireless Xbox controllers, which is why they don't work with most games. But if you've rooted it's easy to get it all working. See this thread from the n7 forum, same process applies to the n10. Been playing GTA Vice City with a wireless controller, works like a charm.
Click to expand...
Click to collapse
very interesting... thanks!
crazy talk said:
Has to be a wired 360 controller. As far as i know the wireless model still connects wirelessly even when plugged in with a 360.
The wired controller is working great for me in GTA vice city though.
Click to expand...
Click to collapse
Do you have to do any setup to get it to recognize the wired 360 controller? Do you just plug it in to the micro-usb port?
AndroidLonghorn said:
Do you have to do any setup to get it to recognize the wired 360 controller? Do you just plug it in to the micro-usb port?
Click to expand...
Click to collapse
well, yeah.
360 controller -› OTG cable -› N10
no need to configure anything....
mista.maja said:
well, yeah.
360 controller -› OTG cable -› N10
no need to configure anything....
Click to expand...
Click to collapse
That's easier than using the wiimote. Thanks!
Hi,
i just bought a second hand mad catz mojo
All works like a charm but i discover that the dongle usb bluetooth is not the original, it's like a small usb cable with a bluetooth dongle on it (with the plastic cover broken)
My question is simple: can i replace this "kind" of dongle with an another like the ones on ebay for exemple...
I think i's a 4.0 bluetooth?
Are all the dongles compatible with the mojo???
Thanks to all
renejardin said:
Hi,
i just bought a second hand mad catz mojo
All works like a charm but i discover that the dongle usb bluetooth is not the original, it's like a small usb cable with a bluetooth dongle on it (with the plastic cover broken)
My question is simple: can i replace this "kind" of dongle with an another like the ones on ebay for exemple...
I think i's a 4.0 bluetooth?
Are all the dongles compatible with the mojo???
Thanks to all
Click to expand...
Click to collapse
Yes its a normal USB BT4 adapter.
I wouldn't replace it if it works.. 'when' kitkat comes out it wouldn't be very useful, unless you use the CTRLR on a desktop etc.
gwaldo said:
Yes its a normal USB BT4 adapter.
I wouldn't replace it if it works.. 'when' kitkat comes out it wouldn't be very useful, unless you use the CTRLR on a desktop etc.
Click to expand...
Click to collapse
HI
Thanks for the answer!
As long it works, i'll waiting for the new android version...
Thanks man
Does anyone know how to pair the v2/Retail C.T.R.L.r with a desktop PC using CSR Harmony Wireless Software Stack? It can see the C.T.R.L.r but when I try to pair it it always times out. I have tried to do it from just turning it on, form hitting start till it turns pink/purple and holding back & start till pink/purple. I am getting the same results from all. I am about to give up and just buy a wired 360 controller.
Sir Jaxxy said:
Does anyone know how to pair the v2/Retail C.T.R.L.r with a desktop PC using CSR Harmony Wireless Software Stack? It can see the C.T.R.L.r but when I try to pair it it always times out. I have tried to do it from just turning it on, form hitting start till it turns pink/purple and holding back & start till pink/purple. I am getting the same results from all. I am about to give up and just buy a wired 360 controller.
Click to expand...
Click to collapse
It's a bluetooth controller, Stipud but does your desktop PC have bluetooth?
gwaldo said:
It's a bluetooth controller, Stipud but does your desktop PC have bluetooth?
Click to expand...
Click to collapse
Um why would I be trying to connect a bluetooth device if I didn't have bluetooth?
Yes I have bluetooth via the dongle that came with the bluetooth controller. I am able to connect the MOJO itself to run audio through my computer as I am running it on my PC monitor which does not have built in audio/speakers. So I know that the bluetooth is functional and the dongle is working.
Sir Jaxxy said:
Um why would I be trying to connect a bluetooth device if I didn't have bluetooth?
Yes I have bluetooth via the dongle that came with the bluetooth controller. I am able to connect the MOJO itself to run audio through my computer as I am running it on my PC monitor which does not have built in audio/speakers. So I know that the bluetooth is functional and the dongle is working.
Click to expand...
Click to collapse
My retail CTRLR didn't come with an adaptor, the mojo's one works with the dongle on my pc.
Try pair code 0000
Hello it's been so many years but I am trying to pair it to my pc through usb and it does not get recognized. Help please?
I have an AT&T Galaxy S10+. I connected a wired Xbox 360 controller to it using the OTG connector that came with it and I can't get the controller to work. The lights around the Xbox button blink but there doesn't seem to be any input. Any ideas? This should work, right?
Ive had the same experience. Noticed on fortnite that with otg cable it wouldnt register the right analog. Using it as bluetooth device works fine tho
Opie Knievel said:
I have an AT&T Galaxy S10+. I connected a wired Xbox 360 controller to it using the OTG connector that came with it and I can't get the controller to work. The lights around the Xbox button blink but there doesn't seem to be any input. Any ideas? This should work, right?
Click to expand...
Click to collapse
Hi. I have the same problem with the ps4 gamepad, I coming from an Sony Xperia phone and all easy to play emulators and general games, but with this device it's recognized the gamepad, but when I go to the option to reassign the buttons it doesn't work.
https://forum.xda-developers.com/galaxy-s10/help/ps4-gamepad-samsung-galaxy-s10-t3912223
This is my original post if somebody could help.