Database Users

Help my gt-i9505 stocked on samsung logo..

i will tell all the information here..i have my samsung gt-i9505 carrier locked to globe telecom here in the philippines..
i tried to factory unlock here http://forum.xda-developers.com/showthread.php?t=2282683 but i have no luck on it..i have change my baseband several time via odin but still i pin request always shows after i reboot..i have android version 4.2.2, stock firmware DXUBMF8.
so i stopped from there..i moved on to try to root my s4,before having this phone i had owned a s4 factory unlock and i have had rooted it but i already forgot how to do it again..so started anew by looking again at forum threads,i have tried omega custom rom but if i goes to recovery mode my screen only shows the following options: reboot system now, apply update from ADB, apply update from external storage, wipe data/factory reset, wipe cache partition, apply update cache..my question here was,is this the default recovery mode of s4 now?because i can still recall that my last s4's default recovery menu shows with advance option with wipe dalvik cache etc..and my recovery menu now shows no apply update from internal storage..when i tried flashing the custom rom save on my sd card: apply update>omega*something*.zip..it all well done but after rebooting my phone didn't any stuff from that custom rom nor rooted at all..can you help me solving this?
and lastly this is my main problem now,i searched again the thread and went down to this thread http://forum.xda-developers.com/showthread.php?t=2250824 i downloaded the pre-rooted rom XXUBMF8..flashed it with odin PDA..passed and from then my phone was stocked every time i reboot to samsung logo..
i have tried to flash again on a stocked rom. odin>PHONE>(the stock rom)>start>passed then reboot it still stocked to samsung logo..
sorry this was too long to read but i have to tell what all i have been done resulting to this..can someone help me..i will be very thanful for your help..

can anyone help me with this?i have been searching the forum for hours..i have done flashing through odin with stock rom and pit file but it ended up failed..done factory reset with default recovery mode but nothing happens still stucked on boot logo..

still no luck.. it was almost 24 hours since my phone bricked..can someone kindly help me.

voidjov said:
still no luck.. it was almost 24 hours since my phone bricked..can someone kindly help me.
Click to expand...
Click to collapse
The recovery your talking about is cwm not default s4 recovery you'll find that recovery here
http://forum.xda-developers.com/showthread.php?t=2281367
After its installed try wiping data then cache then going into advanced and wiping dalvik cache
S4 Info

did you try from the stock rom to go to recovery many and wipe to factory default again...
Have you tried to install a recovery like Philz and see if you can access the file system of your GS4.
You'll also find more wiping option
Edit: oh great some1 posted before me.
also try to do it from your official rom

TingTingin said:
The recovery your talking about is cwm not default s4 recovery you'll find that recovery here
http://forum.xda-developers.com/showthread.php?t=2281367
After its installed try wiping data then cache then going into advanced and wiping dalvik cache
S4 Info
Click to expand...
Click to collapse
no it was stock recovery what i have used not cwm i think..thats the problem because i am used to using cwm that's where all my problem started because i used stock recovery instead which i am not so familiar.
daibaron said:
did you try from the stock rom to go to recovery many and wipe to factory default again...
Have you tried to install a recovery like Philz and see if you can access the file system of your GS4.
You'll also find more wiping option
Edit: oh great some1 posted before me.
also try to do it from your official rom
Click to expand...
Click to collapse
i have read philz thread and tried flash the .tar file with PDA odin but an error shows:
odin failed once again after flashing a stock rom, the error was:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Removed!!
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
no im on a screen shows firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.,
now i cant go even on a stock recovery but i can do download/odin mode..i will not do any further steps from now on,i will wait for your help guys,i don;t want to pay to unbricked my s4,i have to fix it all by myself and your kind help guys..

voidjov said:
no it was stock recovery what i have used not cwm i think..thats the problem because i am used to using cwm that's where all my problem started because i used stock recovery instead which i am not so familiar.
i have read philz thread and tried flash the .tar file with PDA odin but an error shows:
odin failed once again after flashing a stock rom, the error was:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Removed!!
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
no im on a screen shows firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.,
now i cant go even on a stock recovery but i can do download/odin mode..i will not do any further steps from now on,i will wait for your help guys,i don;t want to pay to unbricked my s4,i have to fix it all by myself and your kind help guys..
Click to expand...
Click to collapse
In the Thread you point out... read AGAIN about PIT
http://forum.xda-developers.com/showthread.php?t=2265477
Download the PIT and follow the exact procedure... it's not like flashing a new firmware so read which boxes you check
Try the PIT file with / without the firmware
check also this thread... in case you have a pit related error.
http://forum.xda-developers.com/showthread.php?t=2283919
I'm sure you have all you need to recover your phone.
When you will have recovered your phone, update this thread saying you solved your problem.
check also this thread... in case you have a pit related error.
OH, don't forget to update my thanks counter

Hello,
I saw an answer to this problem in another thread. You have to swipe the phone by starting it with VOLUME UP + HOME + POWER, and then whatever options you have to swipe everything.

Problem SOLVED!!!
hey guys i have solved my greatest problem since i started rooting back on my N7100,my 1st s4 and now my new s4..
thank you for all who helped me,after more than 24hours of reading and waiting for you replies and doing some intervention on my s4,i have recover it..i will post here how i did it for reference for others who might encounter this problem same as mine:
first of all i have noticed this just after successfully revived my phone, you have to WIPE THE DATA/FACTORY REFORMAT via recovery mode before and after doing any firmware update,then i just removed my battery may be a minute and put it back again every time i do flashing..
i used odin version 1.85 not version 3.04..i first chose the pit file and flash it.(when i tried flashing the pit and stock rom together it always ended up to fail)..so i decided to chose to flash the pit file only using odin v1.85(it automatically ticked the "repartition option on this odin version" then it passed..after that as i have said remove battery,wipe data,then i removed again the battery,then put it back and do download/odin mode on my phone,then i flashed stock rom from www.sammoble.com, i searched for globe carrier since my phone was locked on that carrier, then after 2-3minutes(be patient and don't do anything while waiting) my phone backed to life!!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505OLBBMF8_I9505DXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> NON-HLOS.bin
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
for those guys who helped me, i have pressed the thanks button for you guys 100x(i hope i can do that)..but truly i am very much thankful for you guys..i do not have to go to service provider technician or any cellphone repair stall just to repair my phone and pay,i have revived it with your help..THANK YOU!!!
i must add i would like to ask what is the best way to root my phone, i have read chainfire autoroot, is the best way to root my phone?as i can remember it is the same way i have rooted my first s4 two months ago because i saw my old folder here on my pc with that application..and best custom rom?
and the best way to factory unlock my phone, the working firmware..
you can post the link so i can read and do it myself..

The end of my S4? (Brick/dead) - Help..

Hi guys, long time lurker here anyway i've always flashed my S4 with odin and not a single problem always flashed STOCK firmwares
but today i recently discovered a new firmware on the list for the GT-I9500 Exynos Octa (version) - this firmware to be in fact I9500ZNUCMI1
but now its bombed... it hanged and hanged at booting for 20 min then it shut it self off turned it back on 'the firmware encounter a problem' message popped up... i cannot go into recovery mode AT ALL (just download mode) so i thought i will flash my previous stock firmware known as I9500XXUBMG9 but now i cant even do that..... odin just gives me a god damn fail - FOR THE LOVE OF ANDROID HELP ME
- Kies is not running in the background
- USB connections are fine
- Cables are fine
So do i have to fear this is the end ? lol i cannot believe this happened to me on a STOCK firmware.... (lucky for me... all my stuff is backed up on sd)
Any help would be greatly appreciated

lethcore said:
Hi guys, long time lurker here anyway i've always flashed my S4 with odin and not a single problem always flashed STOCK firmwares
but today i recently discovered a new firmware on the list for the GT-I9500 Exynos Octa (version) - this firmware to be in fact I9500ZNUCMI1
but now its bombed... it hanged and hanged at booting for 20 min then it shut it self off turned it back on 'the firmware encounter a problem' message popped up... i cannot go into recovery mode AT ALL (just download mode) so i thought i will flash my previous stock firmware known as I9500XXUBMG9 but now i cant even do that..... odin just gives me a god damn fail - FOR THE LOVE OF ANDROID HELP ME
- Kies is not running in the background
- USB connections are fine
- Cables are fine
So do i have to fear this is the end ? lol i cannot believe this happened to me on a STOCK firmware.... (lucky for me... all my stuff is backed up on sd)
Any help would be greatly appreciated
Click to expand...
Click to collapse
If you can get into Download mode, all hope is not lost. Uninstall and resinstall drivers, Odin, etc. reboot.
Odin back to stock, immediately boot into stock recovery, wipe data, reboot.
Done.

donalgodon said:
If you can get into Download mode, all hope is not lost. Uninstall and resinstall drivers, Odin, etc. reboot.
Odin back to stock, immediately boot into stock recovery, wipe data, reboot.
Done.
Click to expand...
Click to collapse
Thx for reply
Still says FAIL when i try to flash I9500XXUBMG9 what am i doing wrong ?
rebooted laptop twice plug in S4 via usb says unknown device when in download mode but odin reconise it flash it and nothing happens on the screen then i get the big fat RED FAIL ............... AHHH

lethcore said:
Thx for reply
Still says FAIL when i try to flash I9500XXUBMG9 what am i doing wrong ?
rebooted laptop twice plug in S4 via usb says unknown device when in download mode but odin reconise it flash it and nothing happens on the screen then i get the big fat RED FAIL ............... AHHH
Click to expand...
Click to collapse
The good news is that Download mode is still working. AS long as that's the case, you can get it back. Just keep trying. Switch PCs, switch cables, switch ports, re download a different stock ROM, etc. do whatever it takes to try every variable you can think of.
Eventually, you'll find what's causing it and the ROM will flash successfully. When that happens, get immediately into recovery and wipe data.
(Remove the battery after it flashes, but it back in and hold vol-up+home+power.)
After the data wipe....
Reboot.
Like I said, Download mode means you can find a way to flash, but working with Odin to resolve these issues can sometimes be a PITA. I've had the same thing myself before. Just don't give up. Try to stay calm, and work your way through it. You'll get it eventually.
Edit: Just noticed that you flashed a CHINA firmware. (Why? ) You may be facing this issue because (I think) they use a different pit. There's a thread devoted to resurrecting the device with pit. Maybe check it out.

lethcore said:
Thx for reply
Still says FAIL when i try to flash I9500XXUBMG9 what am i doing wrong ?
rebooted laptop twice plug in S4 via usb says unknown device when in download mode but odin reconise it flash it and nothing happens on the screen then i get the big fat RED FAIL ............... AHHH
Click to expand...
Click to collapse
dont flash China or Hong kong firmwares.
please post odin progression

samersh72 said:
dont flash China or Hong kong firmwares.
please post odin progression
Click to expand...
Click to collapse
Nothing to post just says 'completed' but its failed.... i'll remember this next time stay away from china/hong kong firmwares...
im still tyring now and will let you guys/girls know how it pans out! wish me luck!

lethcore said:
Nothing to post just says 'completed' but its failed.... i'll remember this next time stay away from china/hong kong firmwares...
im still tyring now and will let you guys/girls know how it pans out! wish me luck!
Click to expand...
Click to collapse
INFO HERE
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUBMG9_I9500OJVBMG9_I9500XXUBMG9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> param.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> persdata.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

lethcore said:
INFO HERE
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUBMG9_I9500OJVBMG9_I9500XXUBMG9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> param.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> persdata.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
recovery is flashed, try to boot into it and make the wipe then re-flash stock, re-wipe.
if not, flash a custom recovery, format system, cache, re-flash stock, re-wipe

@donalgodon
Why ? well i got the I9500 in hong kong (im actually based in china now) (not Chinese though) thought i'll see some nice changes? but seems i fK'ed the phone.... pit? i haven't a clue man pit number? think i've KILLED HER... lol (i never knew the dangers of Chinese firmware) - wont be going down that route again.

@samersh72
Are you sure? i cannot get into 'recover' mode... the phone just hands at 'Firmware upgrade encounted an issue please select kies & try again
i canm only enter download mode.... when i try to enter recover mode it just flashes at the firmware message.

lethcore said:
@samersh72
Are you sure? i cannot get into 'recover' mode... the phone just hands at 'Firmware upgrade encounted an issue please select kies & try again
i canm only enter download mode.... when i try to enter recover mode it just flashes at the firmware message.
Click to expand...
Click to collapse
flash custom recovery,
if not see my signature for flashing right pit with the firmware

samersh72 said:
flash custom recovery,
if not see my signature for flashing right pit with the firmware
Click to expand...
Click to collapse
Well i just grabbed a I9500 pit file and have my stock firmware just add these 2 to odin and click start? that simple or ??

lethcore said:
Well i just grabbed a I9500 pit file and have my stock firmware just add these 2 to odin and click start? that simple or ??
Click to expand...
Click to collapse
yes, make sure that you are using the right pit, put it in "pit" window in odin, and the firmware in "pda", make sure "re-partition" is ticked, start.

samersh72 said:
yes, make sure that you are using the right pit, put it in "pit" window in odin, and the firmware in "pda", make sure "re-partition" is ticked, start.
Click to expand...
Click to collapse
Well you be happy to know
installed the previous firmware and that pit file for I9500 from your sig and everything seems well... booted correctly nothing lost all seems good to early to tell but will keep you informed !
THANK YOU!!!

Need help flashing stock rom, already attempted and failed on GS5

Hello everyone,
I'm trying to flash a stock rom on a Verizon GS5. I say trying because so far it hasn't been working, unless I'm doing something wrong, which I think I am. When I got the phone, it had a Sprint rom flashed to the GS5. The original Verizon IMEI under the battery is clean and verified good with Verizon. There is nothing physically or cosmetically wrong with the phone, it powers on sometimes and randomly restarts. When it does turn on, the Sprint Spark logo comes up, the phone boots up normally and then randomly shuts off, taking a long time to be able to power back on. The only way that it says on is by putting it on Download Mode.
When in download mode, it shows as a G900P,
As far as my understanding goes, shouldn't it be a G900V?
I attempted to flash a stock Verizon rom I downloaded and tried to flash it with Odin 3.04 but it fails each and every time. I have installed the Samsung drivers that I got from the website, I restarted the computer, I restarted the phone but Odin give me a fail error.
Then I tried a newer version of Odin 4.43 but I'm not sure I'm using that one correctly but it's not working for me either.
I left the phone in Download Mode and it has been on for about 30 mins (the longest so far without it restarting on me).
Is there something that I'm missing here? Something else I could try to fix this?
Any ideas? Suggestions?
Any help would be greatly appreciated!!

..

-> It's a Verizon Galaxy S5 Phone I got from eBay
-> It's flashed with the Sprint rom version of the GS5
-> The phone restarts on and off, randomly, unless it is in Download Mode
-> I want to flash it back to the original Verizon GS5 rom.
-> I attempted to flash the phone with Odin 3.09 and rom SM-G900V_VZW_1_20140331185350
-> I get an error message when using Odin 3.09, it FAILS
-> The progress bar in the GS5 phone advances a small amount but that's it.
-> I attempted to use Odin 4.43 with the same rom file but that also fails and I get an error message.
-> I researched on Google before signing up and asking for help.
-> I have read many Threads and Posts on several Forums, and I have also tried many tutorials without any luck.
-> I researched how to use Odin, there is lot's of pictures, easy explanations but that's not it.
-> I found a GS5 stock rom, file name mentioned above.
-> Samsung drivers are installed, phone is recognized by Odin.
1.) Am I using the correct rom?
2.) Which version of Odin should I use?

..

SewerDweller said:
Hello everyone,
Any ideas? Suggestions?
Any help would be greatly appreciated!!
Click to expand...
Click to collapse
Download this version of Odin and extract the folder in the zip.
Make sure you have downloaded the correct firmware, extract the MD5 / tar file from inside the firmware.zip file you downloaded and put it in the Odin 3.07 folder
Start Odin.exe, put your phone in download mode and connect to your PC, if you have Kies installed make sure it is not running, Odin and Kies don't mix.
Once you have the Blue ID.COM indicated, click on PDA, find the MD5 / .tar file wait for teh file check Odin runs then click Start, wait for Odin to finish and your phone reboots.
Guide for Odin use here it is from the S3 but the use of Odin is the same for the S5

It took me a while to get it to turn on but here's what I got from trying ag4751's suggestions.
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900VVRU1ANI2_G900VVZW1ANI2_G900VVRU1ANI2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
It's the same thing that I was getting before, I'm sorry if I did not explain myself in detail at first.
I have used 2 versions of Odin 3.09 (which I used on my own and got the above message).
3.07 as suggested by ag4751.
I have used 2 different roms and both fail.
->G900V_VZW_1_20140331185350
->G900VVRU1ANI2-20140919141518
@fffft
To answer your question as to what tutorial I followed, I followed ag4751's tutorial/explanation on his reply. It's basic, just like all the other tutorials I googled.
1.) Put the phone in download mode
2.) Open Odin
3.) Select PDA
4.) Wait for the file check
5.) Click start
and then it fails.
That's what @ag4751 suggested, that's what I tried, that's what I tried before, that's what I'm trying now and all that is failing for some reason.

..

..

I9505 Softbricked, Cannot be flashed with odin :(

Hello,
I have problems with my s4 I9505 while I try to unbrick it
After a ota update from android 4.4.2 to 5.X (Orginal Firmware from Samsung) it cannot boot and enter Recovery and now I try to flash Firmware with odin but my phone turning screen off during odin says System.img.ext4 but the phone seens still working because it is showing in odin as connected but it doesn't continue flashing
I also see a new stuff in Download Mode Like Write Protection Enabled and eMMC Burst Mode Enabled

MichalPlays said:
Hello,
I have problems with my s4 I9505 while I try to unbrick it
After a ota update from android 4.4.2 to 5.X (Orginal Firmware from Samsung) it cannot boot and enter Recovery and now I try to flash Firmware with odin but my phone turning screen off during odin says System.img.ext4 but the phone seens still working because it is showing in odin as connected but it doesn't continue flashing
I also see a new stuff in Download Mode Like Write Protection Enabled and eMMC Burst Mode Enabled
Click to expand...
Click to collapse
Which firmware were you trying to flash through Odin? Is it KK or Lollipop?

Post the Odin log here.

Mandark52 said:
Which firmware were you trying to flash through Odin? Is it KK or Lollipop?
Click to expand...
Click to collapse
I tryed to flash Lollipop 5.0.1 (Orginal Firmware) and before brick I had Cyanogenmod Lollipop with Old Samsung Lollipop Modem and all worked fine until this **** ota update :/

Lennyz1988 said:
Post the Odin log here.
Click to expand...
Click to collapse
Ok, I will post it at 4:30p.m. (German Time Zone)

Lennyz1988 said:
Post the Odin log here.
Click to expand...
Click to collapse
ODIN LOG:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOJ2_I9505OXAHOJ2_I9505XXUHOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
(Device Freeze,after 2h battery empty)
<ID:0/007> Removed!!
<OSM> All threads completed. (succeed 0 / failed 1)

MichalPlays said:
ODIN LOG:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOJ2_I9505OXAHOJ2_I9505XXUHOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
(Device Freeze,after 2h battery empty)
<ID:0/007> Removed!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Use a different usb port/different usb cable. That will solve it.

Lennyz1988 said:
Use a different usb port/different usb cable. That will solve it.
Click to expand...
Click to collapse
Nope I tryed now this already :/
I tested also the battery with my other s4 and it worked fine.
There is a pict. that showing where I put the firmware file and what option I select
hmm, what is this CSC and Phone slots at odin?
sry 4 my bad english

Maybe try a newer version of Odin?

MichalPlays said:
Nope I tryed now this already :/
I tested also the battery with my other s4 and it worked fine.
There is a pict. that showing where I put the firmware file and what option I select
hmm, what is this CSC and Phone slots at odin?
sry 4 my bad english
Click to expand...
Click to collapse
Then try a different pc. the log doesn't show anything strange that would let me doubt my suggestion.

Lennyz1988 said:
Then try a different pc. the log doesn't show anything strange that would let me doubt my suggestion.
Click to expand...
Click to collapse
At all my pc's one with win7 and another with windows xp - sp3 it are the same, maybe I need to flash something other and them the firmware :/

@MichalPlays Try using Odin 307.

downgrade Samsung s4 [GT-I9505] from Lolipop 5.0.1 to kitkat 4.4.2
Please read the entire post and don’t skip any steps, note that we cannot be blamed in case something goes wrong and you brick the phone.
1)-Make sure that your phone version is GT-I9505 (if you don't know how to check ; remove your battery then you will find)
2)-Download[/B] " SAMSUNG USB Driver for Mobile Phones" and setup, if you dont have it already
-Download Odin3-v3.09
-Download "PDA" ; "[email protected]" [1.52 GB]
-Download "BL" ; "Bootloader_GNK2.tar" [2.12 MB]
-Download "CP"; "Modem_GNK2_FULL.tar" [61.46 MB]
3)- your phone must be Charged 70% or more, and Rooted, if you have Samsung Kies; reboot your pc then end Kies from CPU (Ctrl + Alt + Supp).
4)-extract Odin and Start a program as an administrator then put only the PDA file which you've already downloaded and extracted before "([email protected])"
-Disable « Auto Reboot » and « Re-Partition »
-Enable « F. Reset Time » only
-Reboot your phone on Download Mode ( Power off the Phone completely, Press and hold Volume Down, Home and Power buttons, all at the same time.
Release the buttons only when the ‘Warning!!’ message appears.
Next, press Volume Up button to confirm that you wish to enter Download Mode.
Your device will now show a green Android with the ‘Downloading… Do not turn off target’ text listed under it.).
-Connect your device with your PC and check "Added Message" and « ID:COM » in Odin
-Start
5)-Once you have "PASS" Plug out your Phone, and Reboot again in "Download Mode",
-Reset Odin
-Enable « Auto Reboot »and « F. Reset Time » only
-Put « Bootloader_GNK2.tar » on "BL"
-Put « Modem_GNK2_FULL.tar » on "CP
-Plug in your Phone and check "Added Message" and « ID:COM » if it doesn't work; restart Odin.
-Start to Downgrade
6)-Once the Downgrade done, plug out your phone and Hard Reset ;
(Power off your phone completely. Boot it in Recovery Mode. Select the ‘wipe data/ factory reset’ option. Confirm process by selecting the ‘Yes — delete all user data’ option. Press Power to confirm process. Reboot the phone when the Hard Reset/ Factory Reset is completed).
7)-Enjoy...

MichalPlays said:
At all my pc's one with win7 and another with windows xp - sp3 it are the same, maybe I need to flash something other and them the firmware :/
Click to expand...
Click to collapse
Ok then we can probably rule that out.
Are you using the original cable? Did you try different cables?

Lennyz1988 said:
Ok then we can probably rule that out.
Are you using the original cable? Did you try different cables?
Click to expand...
Click to collapse
I use always Original Cable and tested with cable from s4, s3, s3neo and htc one x plus and all doesn't work I tryed now the tutorial from this one guy this all was the same :/
btw. can I flash and enter a costum recovery without android on it ??

MichalPlays said:
I use always Original Cable and tested with cable from s4, s3, s3neo and htc one x plus and all doesn't work I tryed now the tutorial from this one guy this all was the same :/
btw. can I flash and enter a costum recovery without android on it ??
Click to expand...
Click to collapse
Yeah you can do that. Flash the latest TWRP. Uncheck auto-reboot before flashing with Odin.

Lennyz1988 said:
Yeah you can do that. Flash the latest TWRP. Uncheck auto-reboot before flashing with Odin.
Click to expand...
Click to collapse
oh, ok I will try this becasue I have this cyanogenmod .rar file on sd card and have also there an nandroid backup

Help special case to flash stock rom in s7 edge 935a

Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it

Darkboss10 said:
Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Click to expand...
Click to collapse
Remove PIT file and try again.
From Edge of Galaxy Seven

Darkboss10 said:
Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Click to expand...
Click to collapse
Not knowing WHAT you are flashing, makes it a little harder to determine what is going wrong.
Go HERE and flash this in Download Mode. This is the latest Stock 935A ROM, This will wipe Everything on the device, and it'll be like it came brand new

norbarb said:
Remove PIT file and try again.
From Edge of Galaxy Seven
Click to expand...
Click to collapse
which is the pit file, sorry for dumb question

Darkboss10 said:
which is the pit file, sorry for dumb question
Click to expand...
Click to collapse
If I remember correctly you need to uncheck PIT in odin and this should help. BTW. What are you trying to flash?
From Edge of Galaxy Seven

I have try the stock rom version 935a...pf2 . And any other stock rom i have found for the 935a seeing which will work .

Darkboss10 said:
I have try the stock rom version 935a...pf2 . And any other stock rom i have found for the 935a seeing which will work .
Click to expand...
Click to collapse
If you are currently on a ROM that has v4 boot loader's, part of your problem may be that you are trying to flash a rom with v2, v3 bootloaders
Sent from my SM-G935T using XDA-Developers Legacy app

so i do better go with the v4 bootloader and i will check if the pit file is uncheck, what should i put on the re-partition case of odin active or inactive?
by the way thanks for your help

kangi26 said:
If you are currently on a ROM that has v4 boot loader's, part of your problem may be that you are trying to flash a rom with v2, v3 bootloaders
Sent from my SM-G935T using XDA-Developers Legacy app
Click to expand...
Click to collapse
hey i did exactly as you told me , and for first time i guess i have an advance, i still get an error but at least a new error , check it out maybe you know what it is
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
any idea what can be?
i try to flash the G935a...PI2 rom bot without the CSC which i guess is the pit file right?

When you try to get the device into Recovery, it will appear like it isn't doing it or looks like an "No Command" error and it can take a couple of min to actually get into Recovery.
I would boot into Recovery again, let it sit for a few min. My bet is that it will eventually get into Recovery. Once it does, do a Factory reset, and then reboot into Download Mode, open Odin connect the device to your PC and install all 4 of the items from the Stock ROM thread, don't mess with any of the settings in Odin, just populate the slots with the BL, AP, CP and CSC

kangi26 said:
When you try to get the device into Recovery, it will appear like it isn't doing it or looks like an "No Command" error and it can take a couple of min to actually get into Recovery.
I would boot into Recovery again, let it sit for a few min. My bet is that it will eventually get into Recovery. Once it does, do a Factory reset, and then reboot into Download Mode, open Odin connect the device to your PC and install all 4 of the items from the Stock ROM thread, don't mess with any of the settings in Odin, just populate the slots with the BL, AP, CP and CSC
Click to expand...
Click to collapse
This is what i get . But it doesnt enter recovery at the end. It just shut off ....

Darkboss10 said:
This is what i get . But it doesnt enter recovery at the end. It just shut off ....
Click to expand...
Click to collapse
Looks like the device is just rebooting
Sent from my SM-G935T using XDA-Developers Legacy app

kangi26 said:
Looks like the device is just rebooting
Sent from my SM-G935T using XDA-Developers Legacy app
Click to expand...
Click to collapse
if you watch the top corner blue letters it says recovery booting....

Darkboss10 said:
if you watch the top corner blue letters it says recovery booting....
Click to expand...
Click to collapse
I'm at a loss man, I'm sorry. I haven't seen that before, I dont get the "Samsung" part when I enter Recovery

Darkboss10 said:
if you watch the top corner blue letters it says recovery booting....
Click to expand...
Click to collapse
Can you post screen from download mode?
From Edge of Galaxy Seven

norbarb said:
Can you post screen from download mode?
From Edge of Galaxy Seven
Click to expand...
Click to collapse
There you go . By the way i should mention the phone only turns on download mode when plugged.

Darkboss10 said:
There you go . By the way i should mention the phone only turns on download mode when plugged.
Click to expand...
Click to collapse
OK you got bootloader v2. Try to flash some older version of MM in download mode using odin
Like from here: http://forum.xda-developers.com/showthread.php?p=67601581
From Edge of Galaxy Seven

You need to start by using the latest Odin, 3.12.3 for installing the original ROM. If you try to unlock, you need to go get the PrinceComsy version. PrinceComsy won't work for in-bricking a device, and if you have any of the stock versions of the ROM, you need the 3.12.3 version.

norbarb said:
OK you got bootloader v2. Try to flash some older version of MM in download mode using odin
Like from here: http://forum.xda-developers.com/showthread.php?p=67601581
From Edge of Galaxy Seven
Click to expand...
Click to collapse
I try that . Now i got this error but only on the phone screen and odin is stuck at initialization .. any idea what could be

i download the venom stock rom and the odin file he suggest but that odin is v 3.11.2 , so that was the one that trows me the odin protocol error, i try the same rom but with the v 3.12.3 odin , and it start working but it says fail at the on the recovery image, do that has to do something with my problem that the phone can boot into recovery mode?
here are the logs
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> FAIL! (Erase)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1