Database Users

Samsung S7710 Xcover2 - device memory lost (0.00B) !

Hi!
I have big problem with my Xcover2
I have uploaded accidentally recovery from another model Galaxy S3 mini (i8190) from here: http://www.androidfilehost.com/?fid=9390334956548391158 after reboot i saw stock recovery, i reboot device. System start normally, but after this operation I was no longer able to enter recovery mode Only download mode works.
So I have uploaded the original ROM using ODIN3 v3.07, firmware i got from here: http://live.samsung-updates.com/index.php?device=GT-S7710 but i still can`t get in recovery mode using keys Vol-up + Home + Power, phone reboot after that keys So i can`t wipe data.
A few times I've used the ODIN and Kies trying to fix the phone. Flashing was done without any problems, there were no errors. But the phone reboot just after boot screen with the name of 'Samsung' and the phone model - bootloop :/
And then in the ODIN uploading another ROM again ticked the option "Nand Erase All" - after was done, there was no bootscreen at boot, on the display instead of startup screen was blank screen like this for 3sec
and after that was startup animation, system start normally I setup language, date etc, but then i discover that device memory was lost 0.00B
can`t receive SMS because there is no memory space :/
When the phone restarts then I have to set up all the settings again
When connecting the phone into the computer I see something like this:
Download mode works fine :
How can I fix the device memory ? (( Any suggestions, ideas? Every time I reboot device I can see blankscreen for ~3sec, and when phone boot I have to set up phone language and other settings again.
Sorry for my English

I am not an expert but i see you have wrong size on phone, reports as 30GB.
I think you need orginal image INCLUDING .pit file
But i have not been able to find online

hondavf1000f said:
I am not an expert but i see you have wrong size on phone, reports as 30GB.
Click to expand...
Click to collapse
This is size of my SD Card Phone memory is wrong size :/
Z3X Box support this phone, its expensive fixing toy but before i buy this i ask them if i can fix my phone using z3x box
I found PIT file on the support website http://z3x-team.com/support_files/ but for download i need connected card :/

jupii soon i get .PIT file for my S7710 so i have hope that fix my phone :fingers-crossed:

veimus said:
jupii soon i get .PIT file for my S7710 so i have hope that fix my phone :fingers-crossed:
Click to expand...
Click to collapse
:fingers-crossed:

Fixed flashing FULL SERVICE FIRMWARE from Z3X BOX support over 760MB with revovery, bootloader etc
Software publicly available from the Internet is trimmed from important files like recovery.img, parm.lfs etc :/
Code:
<OSM> Please wait..
<OSM> CODE_S7710XXAMB6_963581_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXE_S7710OXEAMB3_CL999465_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> STE_boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> STE_boot1.img
<ID:0/004> STE_boot2.img
<ID:0/004> ipl.bin
<ID:0/004> modem.bin
<ID:0/004> ssgtest.img
<ID:0/004> normal.bin
<ID:0/004> normal2.bin
<ID:0/004> param.lfs
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> userdata.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Odin setup:
auto reboot: yes
re-partition: yes
f. reset time: yes
phone bootloader update: yes
all other: uncheked
Oh and now i can get official update via OTA, Device Status: Official

hello! i have sam problem but i cant download any files from z3x box

Hello!
Have you Guys tried to check the Re-partion option in Odin und reflash a Original Samsung Rom or the rooted one from the boegl?

Thanks
Thanks Veimus
I had same problem, but rooting my phone, the links Z3X BOX from where you download it, still online, but i don't know if i can post it here, i will upload it, if anyone need it just ask!
Thanks a lot:good:

chatomas said:
Thanks Veimus
I had same problem, but rooting my phone, the links Z3X BOX from where you download it, still online, but i don't know if i can post it here, i will upload it, if anyone need it just ask!
Thanks a lot:good:
Click to expand...
Click to collapse
Hello
can u please post me somewhere param.lfs from s7710 (X cover 2 ) ?
thx

Same problem.
Hello! I have the same problem with you. If you want, can you give me the soft? I want to repair my phone (I have the same phone xCover 2).

Plz help me!
I have the same problem, can you show me all steps i need to do? I can't download files from z3x support and z3x samsung program doesn't works. Heeelp!

Me too
Story350 said:
I have the same problem, can you show me all steps i need to do? I can't download files from z3x support and z3x samsung program doesn't works. Heeelp!
Click to expand...
Click to collapse
After going through a bunch of stuff trying to fix my mobile data, I have ended up in this predicament.. I found a link to a full service the full service rom in another thread but the link was dead.
Does anyone have the rom and pit file? It would be very much appreciated.
Thank you

Fixed
Turns out I didn't need the full ROM after all. I was able to flash CWM and then mount and format /data. I'm not sure why this worked when a complete reset didn't but I'm thankful it did.

Full Service Rom
Hey Veimus you could be the Full Service Rome upload again?
Or someone else has a link?
I can think of the Z3X box as a student not afford

Recovery
Guys, I need ASAP torrent with S7710XXAMB6_OXEAMB3.zip I can't find it.
I want to restore my recovery but my wallet is too poor to buy z3box

I have the same problem: noone is willing to share? Thanx
Sent from my Xperia U using XDA Free mobile app

Thanx mate you resurrected my phone! Installed cwm formatted data et voila now I have my ram again!
Sent from my Xperia U using XDA Free mobile app

Hello. I need full service rom for s7710. Lost efs file, baseband xxxx, please. Thanks.

Same Problem
Hello guy, sorry for my not perfect english
I have the same problem with my galaxy, can i help me to find a Full service Rom complet of separately file : CNC, MODEM , PIT ,BOOTLOADER( I Have already the pit file). I have try to flash only PDA and PIT file but the problem is not solved!:crying: help me please.......
-question: but the bootloader in this chanche are Damaged???

[Q] Help, Odin stuck at system.img.ext4

Tbh, i found lots threads with the same problem but i couldn't solved mine.... anyway im on SM-9005
Story behind
I was trying to flash Lollipop 5.0 Stock ROM(using ODIN 3.09) [email protected]
and i gotten a huge red FAIL. somehow i manage to get myself to download mode again so without thinking twice i simply flash 4.4.2 stock ROM.
Succeed! but i gotten stuck at Samsung logo, this is where i regretted that i didn't wipe my data,etc via CWM but instead of that i went re-flash the same 4.4.2 stock ROM and now forever stuck at system.img.ext4.....
i tried flash CWM and wipe things up, does not work..
highly appreciate if someone would help me solve this :crying:
p/s.please pardon my english, its not my native tongue language.

elSpade said:
Tbh, i found lots threads with the same problem but i couldn't solved mine.... anyway im on SM-9005
Story behind
I was trying to flash Lollipop 5.0 Stock ROM(using ODIN 3.09) [email protected]
and i gotten a huge red FAIL. somehow i manage to get myself to download mode again so without thinking twice i simply flash 4.4.2 stock ROM.
Succeed! but i gotten stuck at Samsung logo, this is where i regretted that i didn't wipe my data,etc via CWM but instead of that i went re-flash the same 4.4.2 stock ROM and now forever stuck at system.img.ext4.....
i tried flash CWM and wipe things up, does not work..
highly appreciate if someone would help me solve this :crying:
p/s.please pardon my english, its not my native tongue language.
Click to expand...
Click to collapse
First thing - can you get back into Download mode?
If so take out battery and leave things for a while. Then when you put battery back in, hold down the DL mode keys and enter DL. Then connect phone to computer and in Odin, flash your Stock v5
You could also DL the Odin-flashable version of CWM or TWRP and flash that before you restart. (untick the Reboot option in Odin BEFORE you flash the firmware)

Journyman16 said:
First thing - can you get back into Download mode?
If so take out battery and leave things for a while. Then when you put battery back in, hold down the DL mode keys and enter DL. Then connect phone to computer and in Odin, flash your Stock v5
You could also DL the Odin-flashable version of CWM or TWRP and flash that before you restart. (untick the Reboot option in Odin BEFORE you flash the firmware)
Click to expand...
Click to collapse
Yes i can go to DL Mode, and when i flashed Stock v5, got stuck mid way
this is what on my ODIN (tried both 3.07 and 3.09)
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNH1_N9005OLBGNH1_N9005XXUGNH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
btw usually i left the PIT empty, but there's some thread suggested it, i try both. still stuck

elSpade said:
Yes i can go to DL Mode, and when i flashed Stock v5, got stuck mid way
this is what on my ODIN (tried both 3.07 and 3.09)
...
btw usually i left the PIT empty, but there's some thread suggested it, i try both. still stuck
Click to expand...
Click to collapse
What phone do you have?
Do you know which region it is from?
I think that firmware is Austria and some of the Asian phones seem to have different partitions.
Also have you tried re-downloading the file - sometimes zips get corrupted.

Journyman16 said:
What phone do you have?
Do you know which region it is from?
I think that firmware is Austria and some of the Asian phones seem to have different partitions.
Also have you tried re-downloading the file - sometimes zips get corrupted.
Click to expand...
Click to collapse
i bought from Malaysia? Asian that is.
i tried Hong Kong firmware, same problem but i have not tried re-download the HK Firmware, i try re-dl but might takes about 2hours

elSpade said:
i bought from Malaysia? Asian that is.
i tried Hong Kong firmware, same problem but i have not tried re-download the HK Firmware, i try re-dl but might takes about 2hours
Click to expand...
Click to collapse
While you wait, search Q&A for 'boot loop odin' and have a read...

[Q] -CM- What to update to

Hi guys, I have a Samsung Galaxy S4 from Canada, specifically Rogers. The phone is currently on the CM11 Nightly ROM. (I can check specifically which nightly, my phone is just backing up at the moment so I can't see!)
I have this problem, which is, when the phone automatically locks or I myself lock it, the radio signal completely drops. Sometimes the signal will come back, but to get it back for sure is to turn the phone on airplane mode then off again. It is annoying because when the phone is locked for a while, it will receive signal at some point. During that time I'll get a call and it'll ring but once the screen turns on the signal will drop, also dropping the call. I have a slight understanding that it could be a problem with the phone's radio firmware?
Now that you guys have an understanding about my problem, this is what I am hoping to accomplish. I want to update the phones ROM, as it is probably old, along with the proper fix to the phone's radio firmware. How do i go about doing this? The kind of ROM that I want is something in between stable version and nightly (not nightly as I think nightly was the one that caused my radio problem), I think that's SNAPSHOT M12? Please correct me if I am wrong. I would rather not lose any of my data but if I have to then I will but please do guide me because I am scared to lose any of my data.
Thank you guys for reading my long post, I hope my English and grammar is fine! I look forward to hearing from you guys!

The current version of Cyanogenmod is 12.1 (Android 5.1.1). The two release channels for 12.1 are nightlies and snapshots. As of yet there has been no CM12.1 snapshot I'm aware of, meaning all CM12.1 ROMs are nightlies.
You haven't said what version of the stock ROM you had before moving to CM11, but if the radio is too old, you'll want to update it. You'll need Odin and either the modem file, or a complete ROM, which you can download from here. If you choose to install the stock ROM, be aware that you will have to root your device again, using CF-Autoroot. Flashing the stock ROM or modem won't wipe your data unless you tell Odin to partition the S4, so you don't want to do that. What you do want to do before you attempt to do anything is make a nandroid backup as well as move any important files off the internal storage. While you won't need to wipe the S4 prior to installing the new stock ROM or the modem, you will need to do so when installing the new version of Cyanogenmod.
P. S. In the future, you want to direct your questions to the AT&T Galaxy S4 forums as this is the International S4 forum, which doesn't cover North American S4 devices. Your question however is general enough that we should still be able to help you.

Thanks for the reply!
Strephon Alkhalikoi said:
You haven't said what version of the stock ROM you had before moving to CM11
Click to expand...
Click to collapse
I don't know how to answer this, It's been quite a long time since I moved to CM11. Basically what I did was, when I bought the phone I went home and installed CM11 on it, haha.
Strephon Alkhalikoi said:
You'll need Odin and either the modem file, or a complete ROM, which you can download from here. If you choose to install the stock ROM, be aware that you will have to root your device again, using CF-Autoroot. Flashing the stock ROM or modem won't wipe your data unless you tell Odin to partition the S4, so you don't want to do that. What you do want to do before you attempt to do anything is make a nandroid backup as well as move any important files off the internal storage. While you won't need to wipe the S4 prior to installing the new stock ROM or the modem, you will need to do so when installing the new version of Cyanogenmod.
Click to expand...
Click to collapse
I am quite confused, sorry. What I'm doing right now is I'm downloading the newest radio firmware from the link you have given me. After that I'm going to follow the instructions of:
Extract (unzip) the firmware file
Download Odin v3.10.6
Extract Odin ZIP file
Open Odin v.3.10.6
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
That will fix my radio problems?
Now to update my ROM. This is where I am mostly confused. In your opinion, should I stick with CM11 Nightly? Can I somehow go from nightly to a more stable version like cm11 snapshot m12? Should I update to CM12? Will my phone keep up with the CM12 ROM?
Strephon Alkhalikoi said:
P. S. In the future, you want to direct your questions to the AT&T Galaxy S4 forums as this is the International S4 forum, which doesn't cover North American S4 devices. Your question however is general enough that we should still be able to help you.
Click to expand...
Click to collapse
Sorry I will keep that in mind! Mind you, I carefully chose this and looked at all my other options. I didn't see the AT&T forum to fit because AT&T is in the United States and my carrier is in Canada, I just didn't want to have problems with anything else

Guys, I think i screwed up.... So when i downloaded that firmware from Sammobile. I flashed it with ODIN and made sure re-partition was not checked. Everything looked fine and when my phone rebooted (its still rebooting at the moment) the welcome screen was the default "samsung" splash screen, not the Cyanogen Mod . I thought this method was only going to flash the phone's modem, not the ROM too
EDIT:
No....my worst nightmare came true .........NO!!!!
So my phone finished rebooting and its just a black screen. All I can see is the status bar at the top right that displays the WiFi signal and the Phone's network signal and the battery. Okay so I figured something out. When the phone is locked and I press the Home button, Battery Doctor's charging wallscreen shows up, meaning my device wasn't wiped ? When I tried to unlock from Battery Doctor's charging screen, it would just show the black screen with just the status bar .... PLEASE HELP ME !!!

It flashes a complete ROM, which is part of the reason I mentioned making a backup. Now you'll need to root your S4 again, as I mentioned, install a custom recovery, and then you can install Cyanogenmod (12.1 recommended). By flashing the complete ROM it also ensures you have a clean slate from which to move forward. Now all the firmware pieces "match" and you avoid any odd effects by having a mismatched bootloader and baseband.

Strephon Alkhalikoi said:
It flashes a complete ROM, which is part of the reason I mentioned making a backup. Now you'll need to root your S4 again, as I mentioned, install a custom recovery, and then you can install Cyanogenmod (12.1 recommended). By flashing the complete ROM it also ensures you have a clean slate from which to move forward. Now all the firmware pieces "match" and you avoid any odd effects by having a mismatched bootloader and baseband.
Click to expand...
Click to collapse
D'awww Well I guess a clean slate isn't so bad. I backed up my text messsages and my photo's should be backed up onto the google drive anyways. I don't know if you saw my edited post but the UI is not loading. Its just showing the status bar at the top right (signal, wifi signal, battery).
Thanks.

If you're going to install CM12.1 I wouldn't worry about Touchwiz not starting. Just go ahead and prep the phone for Cyanogenmod, as the most important parts - baseband and bootloader - are apparently working properly.
EDIT: ROM installs don't wipe data when done through Odin unless you tell Odin to partition the device. Thus you'd need a factory reset to ensure Touchwiz works. But where you're going to put Cyanogenmod on, don't worry about Touchwiz.

Strephon Alkhalikoi said:
If you're going to install CM12.1 I wouldn't worry about Touchwiz not starting. Just go ahead and prep the phone for Cyanogenmod, as the most important parts - baseband and bootloader - are apparently working properly.
Click to expand...
Click to collapse
The problem is, I can't. There's nothing there on the phone. Its just a black screen. Unless, thats what you meant.
I tried searching for a CM 12.1 Canadian version and I found this thread. http://forum.cyanogenmod.org/topic/104233-jfltesgh-i337m/
apparently theres no canadian version of the CM 12.1
what should I do ?

Use the Optimized CM12.1 here in I9505 Original Android Development. It's supposed to work with all Qualcomm S4s except the Value Edition S4.
Oh, and you don't need CF-Autoroot. Simply install the recovery using Odin, then install Cyanogenmod. Wipe data and cache, then reboot. Everything should be back to normal about ten minutes after rebooting, as the ART compiler compiles the apps.

Strephon Alkhalikoi said:
Use the Optimized CM12.1 here in I9505 Original Android Development. It's supposed to work with all Qualcomm S4s except the Value Edition S4.
Oh, and you don't need CF-Autoroot. Simply install the recovery using Odin, then install Cyanogenmod. Wipe data and cache, then reboot. Everything should be back to normal about ten minutes after rebooting, as the ART compiler compiles the apps.
Click to expand...
Click to collapse
Thanks for the replies! I'm sorry if im asking for too much but could you please confirm that this is the right one? link
So, I don't need to root? how can i verify that my phone is still rooted? If my phone is still rooted, I download Canadian Galaxy S4 SGH-i337M (Bell, Rogers, Telus) – CWM Recovery v6.0.4.4
Then flash that with Odin ?
edit: I think I know why this failed miserably....On Odin V3.10.6 I clicked "AP" for some reason, when I was flashing the firmware. Could that be the problem? If so, is there a fix ? i can't access my phones SD card .

Right link, but Clockworkmod is not a good choice for a recovery to flash through Odin. Use TWRP instead as Clockworkmod is no longer updated.
Cyanogenmod is pre-rooted, though until you open the developer options in settings you can't access it. That's why you don't need to root beforehand. There is no harm however if you choose to root anyway before installing.
Clicking Odin like that shouldn't do anything. But where you've encountered problems, read the instructions here to wipe the storage. Then install the stock ROM again through Odin to see if that resolves the problem.

i just installed cm-12.1-20150625-NIGHTLY-jfltexx on my s4 with cm-12.1-20150623-NIGHTLY-jfltexx but there is a problem with the phone functions. It can't make any call. .it do not find my sim card!! Same thing with cm-12.1-20150624-NIGHTLY . The last one that works is 20150623 . Is there anyone that can confirm my problem?

Strephon Alkhalikoi said:
Right link, but Clockworkmod is not a good choice for a recovery to flash through Odin. Use TWRP instead as Clockworkmod is no longer updated.
Cyanogenmod is pre-rooted, though until you open the developer options in settings you can't access it. That's why you don't need to root beforehand. There is no harm however if you choose to root anyway before installing.
Clicking Odin like that shouldn't do anything. But where you've encountered problems, read the instructions here to wipe the storage. Then install the stock ROM again through Odin to see if that resolves the problem.
Click to expand...
Click to collapse
I am following this:
Code:
TWRP Recovery v2.8.7.0 is suggested for installation
First time or clean install:
Download the ROM from the link above
Download GApps package for Lollipop 5.1
Put the zip files on your SDCard
Reboot in Recovery
Wipe Data / Factory Reset
Optional: convert to F2FS
Select "Install zip from SDCard"
Choose ROM's zip file
Choose GApps zip file
Reboot system
Unfortunately, I am stuck though. I can't put the zip files in my phone because my phone is semi-bricked. I can't access my SD card. I don't have another device that I could plug my SD card into, and I don't have an SD card reader either!
edit: sorry im really like uneasy right now and im thinking that I don't want to lose all my data, so i'm exploring a bit. I booted up CWM because I had a backup made from there. I saw the backup, but when I tried to restore it, it said "MD5 Mismatch" is there ANY way I could get that backup of mine to restore? I would have a peace of mind and then we can restart this process from there.

flipboi15 said:
I am following this:
Code:
TWRP Recovery v2.8.7.0 is suggested for installation
First time or clean install:
Download the ROM from the link above
Download GApps package for Lollipop 5.1
Put the zip files on your SDCard
Reboot in Recovery
Wipe Data / Factory Reset
Optional: convert to F2FS
Select "Install zip from SDCard"
Choose ROM's zip file
Choose GApps zip file
Reboot system
Unfortunately, I am stuck though. I can't put the zip files in my phone because my phone is semi-bricked. I can't access my SD card. I don't have another device that I could plug my SD card into, and I don't have an SD card reader either!
edit: sorry im really like uneasy right now and im thinking that I don't want to lose all my data, so i'm exploring a bit. I booted up CWM because I had a backup made from there. I saw the backup, but when I tried to restore it, it said "MD5 Mismatch" is there ANY way I could get that backup of mine to restore? I would have a peace of mind and then we can restart this process from there.
Click to expand...
Click to collapse
I assume your model is i337M. Check it in download mode. If that's the case, then follow this.
1. Flash this:
http://forum.xda-developers.com/galaxy-s4-att/general/sgh-i337m-canadian-stock-official-t3082758
2. Flash TWRP
3. Flash the rom you want.
That's all. You are making it to difficult.

Lennyz1988 said:
I assume your model is i337M. Check it in download mode. If that's the case, then follow this.
1. Flash this:
http://forum.xda-developers.com/galaxy-s4-att/general/sgh-i337m-canadian-stock-official-t3082758
2. Flash TWRP
3. Flash the rom you want.
That's all. You are making it to difficult.
Click to expand...
Click to collapse
So step 1 and 2 flash that with Odin? Do I wipe or no? If i decide not to wipe, will i still have my old stuff from my phone back?
I am confused with step 3. How do I flash the ROM? Using ODIN? Or TWRP? If its through TWRP, how do I get the ROM in my SD card?
edit: I flashed the first link and this is my log, it failed
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUGOC4_I337MOYAGOC4_I337MVLUGOC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
tried a second time, it still failed
I think my phone is bricked. Its stuck on "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
latest log im digging myself a deeper hole :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUGOC4_I337MOYAGOC4_I337MVLUGOC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Removed!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!

Flashing CM is easy. It doesn't require root access because this phone has no bootloader lock. Download a custom recovery with TAR file format, install drivers, go to the download mode of your phone, connect your phone to your computer, and use Odin to flash the recovery. Then copy CM zip file to a SD card and flash it in recovery. That's all!?
For recovery I recommend TWRP: teamw.in
If you've installed Kies you should have drivers on your computer. Otherwise install Kies or only drivers if you can find them on Samsung official website.

flipboi15 said:
So step 1 and 2 flash that with Odin? Do I wipe or no? If i decide not to wipe, will i still have my old stuff from my phone back?
I am confused with step 3. How do I flash the ROM? Using ODIN? Or TWRP? If its through TWRP, how do I get the ROM in my SD card?
edit: I flashed the first link and this is my log, it failed
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUGOC4_I337MOYAGOC4_I337MVLUGOC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
tried a second time, it still failed
I think my phone is bricked. Its stuck on "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
latest log im digging myself a deeper hole :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUGOC4_I337MOYAGOC4_I337MVLUGOC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Removed!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!
Click to expand...
Click to collapse
Use a different usb port / different usb cable.

Thanks for all the help guys I really do appreciate it and I can't thank you all enough. I have the stock rom working at the moment. I have TWRP installed and I put the ROM and GAPPS into my SD card. I booted into TWRP recovery and clicked on install then i chose the ROM zip but, it fails. This is the error attached picture.

flipboi15 said:
Thanks for all the help guys I really do appreciate it and I can't thank you all enough. I have the stock rom working at the moment. I have TWRP installed and I put the ROM and GAPPS into my SD card. I booted into TWRP recovery and clicked on install then i chose the ROM zip but, it fails. This is the error attached picture.
Click to expand...
Click to collapse
Try redownloading the .zip file. Maybe it's corrupt.

So after trying to install the ROM in TWRP and failing. I couldn't load up the phone anymore, it got stuck at the Samsung Logo screen. I am now re-flashing I337MVLUGOC4 - 5.0.1 Lollipop.
edit:
So at the moment, my phone is working fine on stock rom. I redownloaded the CM-12.1 optimized. I moved it into my SD card. I need to know if there are certain steps I need to do to get this right. These are the steps I took the first time.
Rebooted into TWRP recovery mode, then clicked install then I navigated to the CM-12.1 ROM zip and swiped to install.
Was I supposed to wipe anything? The only time I wiped(the default wipe in twrp) was after I installed the 5.0.1 Lollipop firmware. By the way, i noticed that my phone's internal memory is almost full, it only has 2GB of 9.69GB left in the internal. I checked it out and all my old files were still there!

Reflashing stock rom

I have a Samsung galaxy J5 (2016, SM-J510FN/DS) whose OS I carelessly deleted (while not having a backup nonetheless ) while fixing a boot loop issue. I managed to reinstall Android 6.0 (Marshmallow) from opengapps.org (Arm architecture, 6.0 Android, Full version). The install was successful (I used TWRP to reinstall from my SD card) but I am now stuck on the boot loop. The phone either stays stuck on the Samsung logo or boots into recovery. I have wiped the Davik cache and performed a factory reset with success but I am still getting stuck on this boot loop. I have reinstalled the OS a few times but it #1 fails on zip verification and #2 repeats the boot loop after zip verification is turned off. I have a feeling that this is probably the root of my problem, however, my tool box of solutions is spent. I respectfully ask for assistance from more knowledgeable individuals and offer my thanks in advance.

mrnice10033 said:
I have a Samsung galaxy J5 (2016, SM-J510FN/DS) whose OS I carelessly deleted (while not having a backup nonetheless ) while fixing a boot loop issue. I managed to reinstall Android 6.0 (Marshmallow) from opengapps.org (Arm architecture, 6.0 Android, Full version). The install was successful (I used TWRP to reinstall from my SD card) but I am now stuck on the boot loop. The phone either stays stuck on the Samsung logo or boots into recovery. I have wiped the Davik cache and performed a factory reset with success but I am still getting stuck on this boot loop. I have reinstalled the OS a few times but it #1 fails on zip verification and #2 repeats the boot loop after zip verification is turned off. I have a feeling that this is probably the root of my problem, however, my tool box of solutions is spent. I respectfully ask for assistance from more knowledgeable individuals and offer my thanks in advance.
Click to expand...
Click to collapse
1) Boot in TWRP.
2) Wipe /system, /data, /cache & /dalvik-cache.
3) Power off the phone.
4) Reflash stock ROM with Odin.

#Henkate said:
1) Boot in TWRP.
2) Wipe /system, /data, /cache & /dalvik-cache.
3) Power off the phone.
4) Reflash stock ROM with Odin.
Click to expand...
Click to collapse
Do just like he said, Wiping is not totally required just make sure you perform factory data reset from stock recovery.

#Henkate said:
1) Boot in TWRP.
2) Wipe /system, /data, /cache & /dalvik-cache.
3) Power off the phone.
4) Reflash stock ROM with Odin.
Click to expand...
Click to collapse
unfortunatly, I've tried this multiple times and still cannot get it out of the boot loop. I'm not booting back into recovery but rather to the Samsung logo now.

Wizardlysense said:
Do just like he said, Wiping is not totally required just make sure you perform factory data reset from stock recovery.
Click to expand...
Click to collapse
I've done this as well with no success.

And if you are not waiting for the necessary time you need to load the system? .. since after installing the stock you have to leave this in the samsung logo about 10 to 20 minutes at least

One thing to note is that you should be flashing AP, BL, CP, and CSC, and not the HOME package only (not sure if your variant has it in the first place!). Also, ensure that the "NAND Erase All" option is ticked before performing the flash.

thank you, I have not tried ticking nand flash before but I will try it.

Wizardlysense said:
Do just like he said, Wiping is not totally required just make sure you perform factory data reset from stock recovery.
Click to expand...
Click to collapse
This is what I'm seeing on Odin
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
I have switched from Odin 3.12 to 3.04 and tried different stock files but no success yet.

mrnice10033 said:
This is what I'm seeing on Odin
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
I have switched from Odin 3.12 to 3.04 and tried different stock files but no success yet.
Click to expand...
Click to collapse
Are you sure you have got the correct files for your device? Usually, when it errors out at aboot.mbn it is because the files are for another device/variant. What's your device model? I will try downloading for you the stock files and see whether it is successful.
P.S. Just saw that you noted your device model in the OP. Sorry about that! Give me a moment and I will get the files for you!

https://drive.google.com/drive/folders/0B8346PsUO8X8cUE1QkZMOGI2SmM?usp=sharing
Try this!

Rizzed said:
Are you sure you have got the correct files for your device? Usually, when it errors out at aboot.mbn it is because the files are for another device/variant. What's your device model? I will try downloading for you the stock files and see whether it is successful.
P.S. Just saw that you noted your device model in the OP. Sorry about that! Give me a moment and I will get the files for you!
Click to expand...
Click to collapse
Thank you so much. I appreciate it.

Can't turn on my phone, can't open twrp, Odin fail Galaxy s8

Hello everyone,
I'm following this forum for mounths but just had chance to register.
I tried to root my phone, then I think something went wrong. Turned on the phone and used for a while, but had a fingerprint sensor error. After that I reboot the phone, but while showing the Samsung logo, I got "only official released binaries are allowed to be flashed" top of the screen. And phone was automaticly turning off after that.
Then I put the phone download mode and tried to install official firmware. Odin was failed.
I tried to flash bootloader only, and fail neither.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I thought maybe the stock rom that I trying to install is older. But now I can't open the TWRP with the buttons for the wipe data. The Samsung Galaxy logo views, after that it turns off.
Trying to install twrp again, Odin gives me fail too. Now I can only open the download mode.
I need my phone today urgently for contact with my colleagues.
Please ask me for the missing informations and please help me ASAP.. Sorry for my bad and complicated English..

Try to flash an earlier Version of the bootloader maybe QF7.
I found the flashable odin archive at https://mega.nz/#!5Q4TATzQ!DT2OQO01KHfw7HsVNElZSfZ4DHoO9W99k3dJqfumMhg for s8 and at https://mega.nz/#!dMZ0zbDL!oYrcBh8DeOqMFeO9QObu8eNXVrjsajXICJ0o3MJPJ-o for s8+.
I also find a video for this issue at https://youtu.be/VTi3uBkpJic
Try this and reply back..
- ————————————
Or just try to flash the stock rom without the cm.bin/ bl firm.

memreb1801 said:
Try to flash an earlier Version of the bootloader maybe QF7.
I found the flashable odin archive at for s8+.
I also find a video for this issue at
Try this and reply back..
Click to expand...
Click to collapse
Thank you for helping but I tried these solutions allready. Now downloading another country's official rom from sammobile. I'm going to try this one but I have no hope

Good luck!!??

My solution did work. Download the latest firmware and install it with Odin. Thanks everyone anyway..