[null] - Samsung Galaxy S8+ Guides, News, & Discussion

[null]

Whenever i try select lineage recovery in AP Partition and press the Start button i get an error Saying,
"Odin DownloaderHas Stopped Working"
Please Help me, I've never encountered this error before

Related

Boot Error Message of Death!!!

Upon every reboot I get the following error message:
Your device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source... ... ...
It goes on to say press the UP VOL button to hard reset or any other button to continue.
I press any other button and it proceeds to boot correctly.
Any way to disable the message?
htc hd - Stock 6.1 ROM
EDIT / UPDATE: If don't touch anything when it is on this screen it will eventually continue to boot normally... so again I would just like to disable this message if at all possible.
__________________
up! help...??

Can't get to download mode after "error occurred while updating device SW". s7 edge

Can't get to download mode after "error occurred while updating device SW". s7 edge
While trying to upgrade my Claro galaxy s7 edge from android 6.0 to 7.0 using Smart Switch my phone crashed and the software got corrupted. (couldn't do it through manual/automatic update).
Now i'm stuck on the Window : "An error has occurred while updating the device software. Use the emergency recovery function in the Smart Switch PC software". I tried both the emergency Software Recovery and Device Initialization but both failed with error "failed to run firmware upgrade unknown error occurred". Tried it in different computer, restarting both the devices, reinstalling device driver. Nth worked.
Finally i searched forums and tried to flash custom rom using ODIN. Thing is while downloading the ROM my phone went to Download mode when i pressed "Volume up" + Power + Home button but now the combination just does nothing and i'm stuck on the "An error has occured window". I tried 300k tool and also Both volume + power + slide in usb cable combo but nth happened. I tried to install custom rom through ODIN while in this window but ti fails after 2 mins too.
Also Pressing Volume down Power and home (recovery mode) brings me to this same window again and again. Just waiting for the battery to die and start anew.
Just 4 days with my phone. Any help to solve these problem are appreciated.

			
				
Did you try already vol down + home + power and as soon as the screen goes blank switch to vol up + home + power to get in recovery mode?
Stuck on error screen; no download mode
Pet1981 said:
Did you try already vol down + home + power and as soon as the screen goes blank switch to vol up + home + power to get in recovery mode?
Click to expand...
Click to collapse
I am having the same issue after trying to flash updated ROM on my S8 via Odin. Process got to the end and said 'FAIL'. Following the reboot, I was stuck on the 'An error has occurred...' screen and every attempt to enter Download mode or recovery mode (By quickly switching to the volume up button in between reboots, as you stated) has failed. Smart Switch is not recognising my device either despite all the correct Samsung USB drivers being installed. Any ideas anyone?
Apologies for posting here on S7 forum but the problem is identical.
Did you ever fix this? I have the same problem now
peadark said:
Did you ever fix this? I have the same problem now
Click to expand...
Click to collapse
Does anyone has a solution to this ?
lazers378 said:
Does anyone has a solution to this ?
Click to expand...
Click to collapse
After the battery dies hold vol down+home+power key then it should enter download mode
prajwol.shr18 said:
Can't get to download mode after "error occurred while updating device SW". s7 edge
While trying to upgrade my Claro galaxy s7 edge from android 6.0 to 7.0 using Smart Switch my phone crashed and the software got corrupted. (couldn't do it through manual/automatic update).
Now i'm stuck on the Window : "An error has occurred while updating the device software. Use the emergency recovery function in the Smart Switch PC software". I tried both the emergency Software Recovery and Device Initialization but both failed with error "failed to run firmware upgrade unknown error occurred". Tried it in different computer, restarting both the devices, reinstalling device driver. Nth worked.
Finally i searched forums and tried to flash custom rom using ODIN. Thing is while downloading the ROM my phone went to Download mode when i pressed "Volume up" + Power + Home button but now the combination just does nothing and i'm stuck on the "An error has occured window". I tried 300k tool and also Both volume + power + slide in usb cable combo but nth happened. I tried to install custom rom through ODIN while in this window but ti fails after 2 mins too.
Also Pressing Volume down Power and home (recovery mode) brings me to this same window again and again. Just waiting for the battery to die and start anew.
Just 4 days with my phone. Any help to solve these problem are appreciated.
Click to expand...
Click to collapse
Hi! i know this is an old thread but i know how to fix it. You can flash with odin while you n the error screen. My phone (almost) died when i saw my kg state is prenormal and tried to flash magisk firmware but then... m phone showed up the error and then figured this out you can flash with odin when you are on the error screen.(sorry for bad english)
gasdoc76 said:
Stuck on error screen; no download mode
I am having the same issue after trying to flash updated ROM on my S8 via Odin. Process got to the end and said 'FAIL'. Following the reboot, I was stuck on the 'An error has occurred...' screen and every attempt to enter Download mode or recovery mode (By quickly switching to the volume up button in between reboots, as you stated) has failed. Smart Switch is not recognising my device either despite all the correct Samsung USB drivers being installed. Any ideas anyone?
Apologies for posting here on S7 forum but the problem is identical.
Click to expand...
Click to collapse
just watch my post

Encryption Unsuccessful Huawei Y625 U-32; Firmware is not installing

Hello,
Phone: Huawei Y625 U-32
When I am turning ON the phone, it is opening normally, and logo appears, then the tone (huawei sound) plays. AND SUDDENLY appearing the "Encryption Unsuccessful" screen [with the "reset" button]
When I touched the "Reset" button, it takes me to the "recovery Menu" and I pressed on the "wipe data/factory reset", then it completed and then I pressed the "reboot system". It turned on SAME way, and AGAIN appears that "Encryption Unsuccessful".
Note1: when the "Encryption Unsuccessful" screen appears, then I can take screenshot, up/down volume, turn off/reboot (same UI like we use the phone normally)
Note2: The recovery Menu shows the firmware version ....567B105, even I tried all versions of the firmware (328B105, 567B108, etc)
Note3 : I checked the Chinese menu (Volume Down + Power button). And the camera, touch screen, sound, all are ok.
PLEASE HELP ME TO RECOVERY MY PHONE. I am trying this for a long time. But it is showing SAME thing again and again.
So, I am requesting all experts to HELP ME.
Thanks in advance.

stock recovery missing

Hello everyone. Nice to be here first of all.
Here's some trouble I faced, I'll try to describe it.
I downloaded the official firmware update from the device's menu. (Galaxy Tab 4.7.0 3G)
I followed the system command to reboot. The device restarts. Now, after Samsung logo, "installing update..." screen appears with the green robot. As it supposed.
While the process, the error appears :
E:Error in / cash/ fota/update.zip (status 7)... and it goes on and on.
With the three button combination, "power-volume down-home", I can still enter the download mode, but can't enter the recovery mode for hard reset.
There's another little nuance :
While on "installing system update" screen, I press the "home" button, and see short yellow sentence among others: "unpacking new recovery" Is this why I can't enter stock recovery? Is this all connected somehow?
An what I need to do?
Thank you.

Finale solution to error android.process.acore has stopped

The solution is to reboot in safe mode (long press on power off) wait until the notifications "turn off safe mode" appear click on it it will reboot in normal mode and the error will no more come

Categories

Resources