Upon every reboot I get the following error message:
Your device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source... ... ...
It goes on to say press the UP VOL button to hard reset or any other button to continue.
I press any other button and it proceeds to boot correctly.
Any way to disable the message?
htc hd - Stock 6.1 ROM
EDIT / UPDATE: If don't touch anything when it is on this screen it will eventually continue to boot normally... so again I would just like to disable this message if at all possible.
__________________
up! help...??
Related
down vote
favorite
I sideloaded a bad zip to my phone using Root toolkit software and since then I see "Unfortunately System UI has stopped" message in loop.
When I try to enter recovery mode by pressing Volume Up + Down + Power buttons, I don't see the options. Just android logo with red exclamation is shown in recovery mode.
When I try using Root toolkit to install stock ROM then root toolkit software gives error message that ADB device is found but it was listed as "unauthorized" which I know that I have to accept that confirmation popup in the phone when we connect phone to computer. Since the System UI stopped error comes at phone bootup, I can't see the above fingerprint confirm dialog box too.
Any idea what can be done to resolve this?
When you see the dead android with the exclamation, hold power and press volume up.
First of all, I'd like to mention everything was fine with my phone before i decided to update. I also don't have root. I tried but failed to root.
I just downloaded and installed the marshmallow update for lenovo k3 note. (1657 mb) I have slow and inconsistent wifi so it took about 4 days to download. I installed it today and restarted my phone only to find the error message 'Unfortunately, the process com.android.phone has stopped' [OK][Try to solve]. This literally pops up in my face every second. I try to swipe my phone quickly after pressing [OK] and it works but you have to be rapid. But I cant do anything because this message pops up every time, even after i press [OK] or [Try to solve]. I tried to open settings to factory rest my phone but the settings app seems corrupt. Apparently, it can't even detect my SD card or SIM card. I think there is something wrong with my SD card tbh.
I screwed up big time here. Someone please help!
Try recovery mode to factory reset..
Power off phone
press and hold Volume Up + Volume Down + Power key at the same time for a few seconds.
You can release held keys when you see the LENOVO icon.
You should be in recovery mode now
You can navigate here by using the Volume buttons and confirm options by holding down the Power key.
Try rooting again search Google it works
Then flash custom ROM
"It can't be trusted and my not work properly"
Hi,
I unlocked the bootloader and flashed twrp but can't boot the phone anymore.
It only starts when pressing power button + volume up. Then I get following message two times before I get the third, final message mentioned in the headline:
Code:
Your device has been unlocked and can't be trusted
After that it tells my to press the power button to continue -> phone goes off.
Can't connect to adb shell, so what can I do?
BR
Michael
happyass**** said:
"It can't be trusted and my not work properly"
Hi,
I unlocked the bootloader and flashed twrp but can't boot the phone anymore.
It only starts when pressing power button + volume up. Then I get following message two times before I get the third, final message mentioned in the headline:
Code:
Your device has been unlocked and can't be trusted
After that it tells my to press the power button to continue -> phone goes off.
Can't connect to adb shell, so what can I do?
BR
Michael
Click to expand...
Click to collapse
Can you get into recovery? If so, I would say connect phone in recovery, (will show up on PC as mtp device), then copy anything you don't want to lose. Then do a full wipe, and flash stock rom, or custom rom and see if the message is still there.
Managed to enter recovery for once. Flashed Omnirom but know it stucks at the 'Sony screen'.
Can't get into recovery anymore.
I did it!
It works!
Don't ask me how. Wild keypress combinations and luck.
I think its related to sony drm, you have to flash genesis kernel for it to work well, anyway good luck
Hi!
I've got an Samsung Galaxy S7 since 2017.
Due to an app i wanted to use i tried to Root my phone. It did work but not all apps worked properly so i tried to unroot it.
As it did seem to work but i was still a bit sceptic i decided to do a factory reset to completely empty it.
While doing the factory reset my phone crashed... also found out that i didn't have my OEM allowance on so i can't even enter my phone anymore as it says Custom binary locked by FRP Lock.
I emptied the data / cache and tried to factory reset but it wouldn't do anything.
I tried flashing my phone with the samsung firmware for the S7 with odin, BUT my phone doesn't respond at all.
it just keeps standing on Downloading... do not turn off target. Even if Odin tries to write onto the phone nothing happens, even tho the downloader should respond. Tried different Cables as well. As of now i have no idea what to do left to get in there. i tried for hours, tried different firmwares, but nothing responds... Anyone having tips for me?
When you tried with oden where you in download mode or still on the boot screen with the lock message?
You can't flash if your not in download mode.
to get in download you shoud normally by pressing the Volume Down, Home and Pose On/Off button together for about 3-4 seconds.
Once the Download screen appears, press Volume Up button to continue.
you could give this a try
Press the Power On/Off button and Volume Down button simultaneously for 5-7 seconds as shown below.
Wait for the phone to reboot and start again normally.
See that the Custom Binary Block error message does not pop-up this time.
if not then you could try .
Another useful way to bypass/remove the FRP Lock error is to perform a factory reset on your phone. This can be implemented by booting into the Recovery Mode. To do so:
Long press the Power On/Off, Home and Volume Up button together and was for a screen with multiple options appear before you.
Now use the Volume Down key to scroll down and select “Wipe Data/Factory Reset” using the Power On/Off button as shown in the screenshot below.
Wait patiently for the process to get over and for your phone to restart normally.
Note: you will lose all your data and setting stored in the phone after performing a factory/ hard reset.
Be prepared to set-up your phone from scratch after the process is over.
RichyE said:
When you tried with oden where you in download mode or still on the boot screen with the lock message?
You can't flash if your not in download mode.
to get in download you shoud normally by pressing the Volume Down, Home and Pose On/Off button together for about 3-4 seconds.
Once the Download screen appears, press Volume Up button to continue.
you could give this a try
Press the Power On/Off button and Volume Down button simultaneously for 5-7 seconds as shown below.
Wait for the phone to reboot and start again normally.
See that the Custom Binary Block error message does not pop-up this time.
if not then you could try .
Another useful way to bypass/remove the FRP Lock error is to perform a factory reset on your phone. This can be implemented by booting into the Recovery Mode. To do so:
Long press the Power On/Off, Home and Volume Up button together and was for a screen with multiple options appear before you.
Now use the Volume Down key to scroll down and select “Wipe Data/Factory Reset” using the Power On/Off button as shown in the screenshot below.
Wait patiently for the process to get over and for your phone to restart normally.
Note: you will lose all your data and setting stored in the phone after performing a factory/ hard reset.
Be prepared to set-up your phone from scratch after the process is over.
Click to expand...
Click to collapse
It was already in download mode. i can get into download mode, it just doesn't respond when i try with Odin.
The 2nd doesn't work somehow.. the lock still appears unfortunatly...
And did multiple times wipe data / factory reset but nothing...
Hi, big problem with my note.
Unlocked with custom rom today starts going in bootloop with warning screen about this is not the original rom. So I shut down the phone and after a bit I connect it to the power ac and the phone starts to boot loop with logo honor heavenly background. I cannot enter in bootloader pressing the right buttons.
Is it bricked? There's anything I can do? Please help me and sorry for my english.
Thanks.
Hi @rolling_bonzy
you can try to enter erecovery and let it install the latest version of stockrom.
to do this, connect your device to your computer with usb, then hold powerbutton as long as it needs to restart, then keep holding "vol+" until on the screen "your device has been blablabla not trusted" and the message shows up "your device is booting now..." - wait a while and you land in the Huawei eRecovery, where you can "Download latest version and recovery" ... do that
perhaps it is needed a second time after that for doing a factory reset in the same menu
let us know if it worked, cheers =)
pixel81k said:
Hi @rolling_bonzy
you can try to enter erecovery and let it install the latest version of stockrom.
to do this, connect your device to your computer with usb, then hold powerbutton as long as it needs to restart, then keep holding "vol+" until on the screen "your device has been blablabla not trusted" and the message shows up "your device is booting now..." - wait a while and you land in the Huawei eRecovery, where you can "Download latest version and recovery" ... do that
perhaps it is needed a second time after that for doing a factory reset in the same menu
let us know if it worked, cheers =)
Click to expand...
Click to collapse
Many thanks for your reply. Unfortunately no succes. But I notice that if I press "vol -" it stops to boot loop and the screen is black. If I release the button restart flashing.
and does it flash or only wants to?
perhaps you have a chance if you create a 'dload'-folder on your sdcard and therein copy this file (for example): http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3130/g1699/v168765/f1/full/update.zip (i have it from the topmost entry from http://pro-teammt.ru/firmware-database/?firmware_model=EDI-AL10&firmware_page=0 -> click on 'filelist')
After that, connect your device with usb on the computer, restart and keep holding vol+ and vol-
keep us updated