Hello everyone. Nice to be here first of all.
Here's some trouble I faced, I'll try to describe it.
I downloaded the official firmware update from the device's menu. (Galaxy Tab 4.7.0 3G)
I followed the system command to reboot. The device restarts. Now, after Samsung logo, "installing update..." screen appears with the green robot. As it supposed.
While the process, the error appears :
E:Error in / cash/ fota/update.zip (status 7)... and it goes on and on.
With the three button combination, "power-volume down-home", I can still enter the download mode, but can't enter the recovery mode for hard reset.
There's another little nuance :
While on "installing system update" screen, I press the "home" button, and see short yellow sentence among others: "unpacking new recovery" Is this why I can't enter stock recovery? Is this all connected somehow?
An what I need to do?
Thank you.
Related
Upon every reboot I get the following error message:
Your device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source... ... ...
It goes on to say press the UP VOL button to hard reset or any other button to continue.
I press any other button and it proceeds to boot correctly.
Any way to disable the message?
htc hd - Stock 6.1 ROM
EDIT / UPDATE: If don't touch anything when it is on this screen it will eventually continue to boot normally... so again I would just like to disable this message if at all possible.
__________________
up! help...??
down vote
favorite
I sideloaded a bad zip to my phone using Root toolkit software and since then I see "Unfortunately System UI has stopped" message in loop.
When I try to enter recovery mode by pressing Volume Up + Down + Power buttons, I don't see the options. Just android logo with red exclamation is shown in recovery mode.
When I try using Root toolkit to install stock ROM then root toolkit software gives error message that ADB device is found but it was listed as "unauthorized" which I know that I have to accept that confirmation popup in the phone when we connect phone to computer. Since the System UI stopped error comes at phone bootup, I can't see the above fingerprint confirm dialog box too.
Any idea what can be done to resolve this?
When you see the dead android with the exclamation, hold power and press volume up.
Hello,
Phone: Huawei Y625 U-32
When I am turning ON the phone, it is opening normally, and logo appears, then the tone (huawei sound) plays. AND SUDDENLY appearing the "Encryption Unsuccessful" screen [with the "reset" button]
When I touched the "Reset" button, it takes me to the "recovery Menu" and I pressed on the "wipe data/factory reset", then it completed and then I pressed the "reboot system". It turned on SAME way, and AGAIN appears that "Encryption Unsuccessful".
Note1: when the "Encryption Unsuccessful" screen appears, then I can take screenshot, up/down volume, turn off/reboot (same UI like we use the phone normally)
Note2: The recovery Menu shows the firmware version ....567B105, even I tried all versions of the firmware (328B105, 567B108, etc)
Note3 : I checked the Chinese menu (Volume Down + Power button). And the camera, touch screen, sound, all are ok.
PLEASE HELP ME TO RECOVERY MY PHONE. I am trying this for a long time. But it is showing SAME thing again and again.
So, I am requesting all experts to HELP ME.
Thanks in advance.
Hi, big problem with my note.
Unlocked with custom rom today starts going in bootloop with warning screen about this is not the original rom. So I shut down the phone and after a bit I connect it to the power ac and the phone starts to boot loop with logo honor heavenly background. I cannot enter in bootloader pressing the right buttons.
Is it bricked? There's anything I can do? Please help me and sorry for my english.
Thanks.
Hi @rolling_bonzy
you can try to enter erecovery and let it install the latest version of stockrom.
to do this, connect your device to your computer with usb, then hold powerbutton as long as it needs to restart, then keep holding "vol+" until on the screen "your device has been blablabla not trusted" and the message shows up "your device is booting now..." - wait a while and you land in the Huawei eRecovery, where you can "Download latest version and recovery" ... do that
perhaps it is needed a second time after that for doing a factory reset in the same menu
let us know if it worked, cheers =)
pixel81k said:
Hi @rolling_bonzy
you can try to enter erecovery and let it install the latest version of stockrom.
to do this, connect your device to your computer with usb, then hold powerbutton as long as it needs to restart, then keep holding "vol+" until on the screen "your device has been blablabla not trusted" and the message shows up "your device is booting now..." - wait a while and you land in the Huawei eRecovery, where you can "Download latest version and recovery" ... do that
perhaps it is needed a second time after that for doing a factory reset in the same menu
let us know if it worked, cheers =)
Click to expand...
Click to collapse
Many thanks for your reply. Unfortunately no succes. But I notice that if I press "vol -" it stops to boot loop and the screen is black. If I release the button restart flashing.
and does it flash or only wants to?
perhaps you have a chance if you create a 'dload'-folder on your sdcard and therein copy this file (for example): http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3130/g1699/v168765/f1/full/update.zip (i have it from the topmost entry from http://pro-teammt.ru/firmware-database/?firmware_model=EDI-AL10&firmware_page=0 -> click on 'filelist')
After that, connect your device with usb on the computer, restart and keep holding vol+ and vol-
keep us updated
I was installing a custom ROM when I got a screen saying Verification integrity failed. I was then given a screen saying "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software" I held Power+Bixby key and Volume Down to be sent into the custom OS install screen. I was then trying to install TWRP, but when the device restarts and I hold down Volume Up, Bixby and Power Button, nothing happens and the phone is in a boot loop with the screen saying "SAMSUNG GALAXY S8 POWERED BY ANDROID"
TC Tahsin said:
I was installing a custom ROM when I got a screen saying Verification integrity failed. I was then given a screen saying "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software" I held Power+Bixby key and Volume Down to be sent into the custom OS install screen. I was then trying to install TWRP, but when the device restarts and I hold down Volume Up, Bixby and Power Button, nothing happens and the phone is in a boot loop with the screen saying "SAMSUNG GALAXY S8 POWERED BY ANDROID"
Click to expand...
Click to collapse
you have to have the phone connected to a PC while performing the button press combo when it does that