Hello, I bought Redmi Note 7 from aliexpress, it came with EU Rom and unlocked bootloader, i thougth it was official so i decided to lock the bootloader so it will be more secure and i think it got bricked. And now i'm stuck in the recovery "This MIUI version can't be installed on this device", tried to unlock bootloader officially (i had permissions on my old Note 3), but i got "Current account is not bound to this device", tried flashing rom with chinese MI PC suite to no avail.
I'm out of options. Can it be unbricked, can services access edl mode and flash official rom or can i do something?
7enas said:
Hello, I bought Redmi Note 7 from aliexpress, it came with EU Rom and unlocked bootloader, i thougth it was official so i decided to lock the bootloader so it will be more secure and i think it got bricked. And now i'm stuck in the recovery "This MIUI version can't be installed on this device", tried to unlock bootloader officially (i had permissions on my old Note 3), but i got "Current account is not bound to this device", tried flashing rom with chinese MI PC suite to no avail.
I'm out of options. Can it be unbricked, can services access edl mode and flash official rom or can i do something?
Click to expand...
Click to collapse
youtube. com/watch?v=K4rDNl3GGPs (delete the empty part of the link)
use this method, use miflash and stable chinese rom. Remember after your phone alive again you have to wait for 7-15 days to unlock it again.
7enas said:
Hello, I bought Redmi Note 7 from aliexpress, it came with EU Rom and unlocked bootloader, i thougth it was official so i decided to lock the bootloader so it will be more secure and i think it got bricked. And now i'm stuck in the recovery "This MIUI version can't be installed on this device", tried to unlock bootloader officially (i had permissions on my old Note 3), but i got "Current account is not bound to this device", tried flashing rom with chinese MI PC suite to no avail.
I'm out of options. Can it be unbricked, can services access edl mode and flash official rom or can i do something?
Click to expand...
Click to collapse
Download MiFlasher and fastboot rom, Youtube the instruction. FIXED.
h0p3l3ss_s0ul said:
youtube. com/watch?v=K4rDNl3GGPs (delete the empty part of the link)
use this method, use miflash and stable chinese rom. Remember after your phone alive again you have to wait for 7-15 days to unlock it again.
Click to expand...
Click to collapse
So without opening the phone there is no way?
enzeruh said:
Download MiFlasher and fastboot rom, Youtube the instruction. FIXED.
Click to expand...
Click to collapse
Tried, got xbl error, if i would fix that, i would probably get error "can't flash in lock state".
7enas said:
Tried, got xbl error, if i would fix that, i would probably get error "can't flash in lock state".[/QUO
Dont know if you could flash from edl mode.
Click to expand...
Click to collapse
Try sideloading that fastboot rom to your device..
This might not be of help, but here's what I had to do to install the Polish MIUI/Xiaomi.eu variant (as I'm from Poland).
The first thing you need to do is to download Xiaomi's adb / fastboot tools ( https://miui.blog/any-devices/xiaomi-adb-fastboot-usb-drivers-tool/ ). After that, we connect the phone to the computer using the cable that was in the box with it. After connecting, locate the folder where the adb / fastboot tools are, press Shift + Right mouse button and choose the PowerShell window. After that, enter "adb devices" and if the correct phone name appears, enter "adb reboot bootloader". Thanks to this, the phone will go into Fastboot mode (you can skip this & go straight to fastboot). If possible, enter "fastboot devices" to check if the phone is still being detected. If it is, enter "fastboot flash recovery twrp.img" (after downloading the proper TWRP ), but DO NOT PRESS ENTER. At this point, disconnect the USB cable from the computer, press Enter in PowerShell and connect the phone again. If everything went correctly, you should have TWRP flashed without problems. Then, press the Power button on the phone until it vibrates, then immediately hold Power and Volume + until the phone enters TWRP itself. If everything went correctly, you can now upload MIUI immediately after the phone is in TWRP. Then, you can enjoy the new system.
Sithhy™ said:
This might not be of help, but here's what I had to do to install the Polish MIUI/Xiaomi.eu variant (as I'm from Poland).
The first thing you need to do is to download Xiaomi's adb / fastboot tools ( https://miui.blog/any-devices/xiaomi-adb-fastboot-usb-drivers-tool/ ). After that, we connect the phone to the computer using the cable that was in the box with it. After connecting, locate the folder where the adb / fastboot tools are, press Shift + Right mouse button and choose the PowerShell window. After that, enter "adb devices" and if the correct phone name appears, enter "adb reboot bootloader". Thanks to this, the phone will go into Fastboot mode (you can skip this & go straight to fastboot). If possible, enter "fastboot devices" to check if the phone is still being detected. If it is, enter "fastboot flash recovery twrp.img" (after downloading the proper TWRP ), but DO NOT PRESS ENTER. At this point, disconnect the USB cable from the computer, press Enter in PowerShell and connect the phone again. If everything went correctly, you should have TWRP flashed without problems. Then, press the Power button on the phone until it vibrates, then immediately hold Power and Volume + until the phone enters TWRP itself. If everything went correctly, you can now upload MIUI immediately after the phone is in TWRP. Then, you can enjoy the new system.
Click to expand...
Click to collapse
^ this something new i've seen, unfortunately i sent it to service, they said will try to reflash (they even said i might need a new mobo with is a nonsense), if they fail i will try this. Thank you.
Im in the same condition, full brick, no image, no vibration, nothing. The only thing that can save him is an authorized account, but I live in Argentina and I'm a student, I can't pay $ 30, it's a lot of money here. If you find a solution please post it. I'm desperate
Try flashing the global fastboot rom via miflash tool.It will surely work
Infiniction said:
Try flashing the global fastboot rom via miflash tool.It will surely work
Click to expand...
Click to collapse
Error: Flashing is not allowed in the lock state
Downloaded latest europe fastboot and now i get this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi there! How are you? Could you solve the problem? How did you do it? Thank you!
TinoSantos said:
Hi there! How are you? Could you solve the problem? How did you do it? Thank you!
Click to expand...
Click to collapse
Just open your phone back ( https://www.youtube.com/watch?v=arV7POS-iiM ) i used hairdryer instead ( safer ), remove screws and disconnect the battery (yellow screws, blue battery connector) or just follow the vid ). Test point ( https://www.youtube.com/watch?v=XzknDcBovWw ) then flash china rom if you have chinese variant. Then apply for BL unlocking, after unlocking flash GLOBAL or whatever version you want with MiFlasher ( DON"T CHOOSE FLASH AND LOCK). Never lock again if not on china rom (on china variant)
7enas said:
Just open your phone back ( https://www.youtube.com/watch?v=arV7POS-iiM ) i used hairdryer instead ( safer ), remove screws and disconnect the battery (yellow screws, blue battery connector) or just follow the vid ). Test point ( https://www.youtube.com/watch?v=XzknDcBovWw ) then flash china rom if you have chinese variant. Then apply for BL unlocking, after unlocking flash GLOBAL or whatever version you want with MiFlasher ( DON"T CHOOSE FLASH AND LOCK). Never lock again if not on china rom (on china variant)
Click to expand...
Click to collapse
Thanks, it doesn`t work for me because the phone is in edl mode already, when try to flash says "only nup and sig tag can be received before flash anything", so only with an edl authorized account, even with QFIL and SDM660 modified programmer. I will have to pay a person who has it and never buy a xiaomi again, this has already happened to me with other brands (I like modding) and solved it easily with a pc in 15 min. Thank you.
(GTranslate)
TinoSantos said:
Thanks, it doesn`t work for me because the phone is in edl mode already, when try to flash says "only nup and sig tag can be received before flash anything", so only with an edl authorized account, even with QFIL and SDM660 modified programmer. I will have to pay a person who has it and never buy a xiaomi again, this has already happened to me with other brands (I like modding) and solved it easily with a pc in 15 min. Thank you.
(GTranslate)
Click to expand...
Click to collapse
Hola, tenías el cel desbloqueado? podes explicarme que te paso en una de esas te puedo dar una mano. levanta el cel? llega al sistema? si tenias el sistema desbloqueado se supone que debiste haberte logueado con una cuenta de xiomi/miui por lo cual deberias poder usarla para desbloquear, sino te levanta el cel pero esta desbloqueado deberias poder acceder por adb para entrar en un recovery y de ahi flashearlo. avisame cual es el problema exacto a ver.
Related
Disclaimer
We are not responsible for bricked devices,
thermonuclear war, or you getting fired because the alarm app failed.
YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Hard. A lot.
MX4 ANDROID VERSION:
DONWLOAD THE ROM
https://mega.nz/#!JQ0zHJLb!6Z_zL3SglvKh3r7BDjiiITe0S4ARR0zUgKo-Ifx1VyE
AND FLASH IT VIA RECOVERY
MX4 UBUNTU VERSION:
- MEIZU MX4 16/32
- SP FLASH TOOL
- DRIVERS
- FACTORY FIRMWARE
ALL THE FILES CAN BE DOWNLOADED FROM THIS LINK: https://mega.nz/#F!MkNnETAZ!GYPnBc8B_LMgdR1fNI0c_g
1
- TURN OFF THE PHONE
- OPEN DEVICE MANAGER
- PLUG THE PHONE TO THE PC AND HOLD VOLUME UP + POWER BUTTON (HOLD IT AND WATCH DEVICE MANAGER A UNKNOWN DEVICE POPUP FASTY)
- WHEN POPUP UPGRADE THE DRIVER OF THIS UNKNOWN DEVICE (FASTY) FROM THE FOLDER "Drivers Hard Reset"
- WHEN YOU DO IT TURN OFF THE PHONE BUT LEAVE IT UNPLUGGED
2
-UNZIP FACTORY FIMRWARE
- UNZIP SP TOOL "SP_Flash_Tool_exe_windows_v5.1424.00"
- UNZIP "DLL" AND INSTALL IT
- OPEN SP TOOL
- CHOOSE THE SCATTER (FROM factory_m75_1.5.0.21.test-signed)
- CHOOSE "FIRMWARE UPGRADE" (IF YOU DO DOWNLOAD YOU BRICK YOUR PHONE)
- CHOOSE THE DONWLOAD AGENT "DA_SWSEC.bin"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3
- PUSH "DOWNLOAD" ON SP TOOL
- ON PHONE TURNED OFF HOLD VOLUME UP + VOLUME DOWN AND PLUG IN IT (WHEN THE BAR COME RED KEEP OLD THE BUTTONS, WHEN THE BAR COME WHITE AND THE PROCESS START LEAVE VOLUME BUTTONS)
When the process finish you have an factory unlocked Meizu MX4 with KitKat. If you want try Ubuntu Touch look this thread----> http://forum.xda-developers.com/meizu-mx/general/meizu-mx4-how-to-flash-ubuntu-touch-t3210039
Thanks to Taras. Thanks to me for the tests. :good: :highfive:
Naphtha said:
Disclaimer
We are not responsible for bricked devices,
thermonuclear war, or you getting fired because the alarm app failed.
YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Hard. A lot.
YOU NEED:
- MEIZU MX4 16/32
- SP FLASH TOOL
- DRIVERS
- FACTORY FIRMWARE
ALL THE FILES CAN BE DOWNLOADED FROM THIS LINK: https://mega.nz/#F!MkNnETAZ!GYPnBc8B_LMgdR1fNI0c_g
1
- TURN OFF THE PHONE
- OPEN DEVICE MANAGER
- PLUG THE PHONE TO THE PC AND HOLD VOLUME UP + POWER BUTTON (HOLD IT AND WATCH DEVICE MANAGER A UNKNOWN DEVICE POPUP FASTY)
- WHEN POPUP UPGRADE THE DRIVER OF THIS UNKNOWN DEVICE (FASTY) FROM THE FOLDER "Drivers Hard Reset"
- WHEN YOU DO IT TURN OFF THE PHONE BUT LEAVE IT UNPLUGGED
2
-UNZIP FACTORY FIMRWARE
- UNZIP SP TOOL "SP_Flash_Tool_exe_windows_v5.1424.00"
- UNZIP "DLL" AND INSTALL IT
- OPEN SP TOOL
- CHOOSE THE SCATTER (FROM factory_m75_1.5.0.21.test-signed)
- CHOOSE "FIRMWARE UPGRADE" (IF YOU DO DOWNLOAD YOU BRICK YOUR PHONE)
- CHOOSE THE DONWLOAD AGENT "DA_SWSEC.bin"
View attachment 3588241 View attachment 3588242
3
- PUSH "DOWNLOAD" ON SP TOOL
- ON PHONE TURNED OFF HOLD VOLUME UP + VOLUME DOWN AND PLUG IN IT (WHEN THE BAR COME RED KEEP OLD THE BUTTONS, WHEN THE BAR COME WHITE AND THE PROCESS START LEAVE VOLUME BUTTONS)
When the process finish you have an factory unlocked Meizu MX4 with KitKat. If you want try Ubuntu Touch look this thread----> http://forum.xda-developers.com/meizu-mx/general/meizu-mx4-how-to-flash-ubuntu-touch-t3210039
Thanks to Taras. Thanks to me for the tests. :good: :highfive:
Click to expand...
Click to collapse
Give firmware flashtool 1,4,1
thanks for your job .can I flash it on my Android MX4?
CN_Victor said:
thanks for your job .can I flash it on my Android MX4?
Click to expand...
Click to collapse
Yes try
Cyka blyat'
Your method dosen't work on Meizu MX4 32Gb Android Edition from China (M460)
MEIZU MX4
dude it dose not work !
OK IM A BIT SUSPICIOUS AT THIS POINT ,, SO YOU SAY THAT YOUR INSTRUCTION WILL UNBRICK AND UNLOCK OUR BRICKED MEIZU MX4 PHONES BUT WHY DONT YOU SHOW US A SCREENSHOT OF SP FLASH TOOL WITH THIS FANCY RED LINE THAT PROVES THAT YOUR INSTRUCTION ACTUALLY WORKS
BROM ERROR: S_BROM_CMD_STARTCMD_FAIL(2005)
[BROM] Can not pass bootrom start comand! Possibly target power up too early.
[HINT]:
Hi Naphtha, this error appear to me when I connect the phone after to push download in sp flash tool. Any idea? Thank's a lot.
Edit: Other error.
BROM ERROR: S_AUTH_HANDLE_IS_NOT_READY(5000)
[User] This is a secure base-band chip! Please select the authentication file first
[HINT]
MeNa82 said:
BROM ERROR: S_BROM_CMD_STARTCMD_FAIL(2005)
[BROM] Can not pass bootrom start comand! Possibly target power up too early.
[HINT]:
Hi Naphtha, this error appear to me when I connect the phone after to push download in sp flash tool. Any idea? Thank's a lot.
Edit: Other error.
BROM ERROR: S_AUTH_HANDLE_IS_NOT_READY(5000)
[User] This is a secure base-band chip! Please select the authentication file first
[HINT]
Click to expand...
Click to collapse
You have it! Try to "format whole bootloader" on SP flash tool. Hold volume up + volume down.
Naphtha said:
You have it! Try to "format whole bootloader" on SP flash tool. Hold volume up + volume down.
Click to expand...
Click to collapse
What do you mean? In section "format" appear:
validation start stop
auto format flash
manual format flash
auto format flag
format whole flash
format whole except bootloader
I tried the 2 last options and appear the same 5000 error
you have 2 errors : 1 for auth and 1 for fast-start up. The first come because you don't hold good volume down and volume up the second can come for the partitions damaged.
Use volume down ad volume up and choose format whole except bootloader". Try this.
Naphtha said:
you have 2 errors : 1 for auth and 1 for fast-start up. The first come because you don't hold good volume down and volume up the second can come for the partitions damaged.
Use volume down ad volume up and choose format whole except bootloader". Try this.
Click to expand...
Click to collapse
may i ask you how much cost to repair meizu mx4 in Italy ?
P.S. your instruction work because you have/had unlocked boot-loader and thats why you can easily install any firmware .. meanwhile me and other users who have locked bootloader from the factory can not install any of those firmware .. we can't even flash firmware via sp flash tool because MEIZU locked our phones in the factory .
ertog said:
may i ask you how much cost to repair meizu mx4 in Italy ?
P.S. your instruction work because you have/had unlocked boot-loader and thats why you can easily install any firmware .. meanwhile me and other users who have locked bootloader from the factory can not install any of those firmware .. we can't even flash firmware via sp flash tool because MEIZU locked our phones in the factory .
Click to expand...
Click to collapse
Yes but this is an factory firmware with factory tools. Is impossibile.
Naphtha said:
you have 2 errors : 1 for auth and 1 for fast-start up. The first come because you don't hold good volume down and volume up the second can come for the partitions damaged.
Use volume down ad volume up and choose format whole except bootloader". Try this.
Click to expand...
Click to collapse
Forget de first error, may be I didn't press the botons correctly. But now , always appear the second error:
BROM ERROR: S_AUTH_HANDLE_IS_NOT_READY(5000)
[User] This is a secure base-band chip! Please select the authentication file first
[HINT]
Any one with brick phone can try it?
MeNa82 said:
Forget de first error, may be I didn't press the botons correctly. But now , always appear the second error:
BROM ERROR: S_AUTH_HANDLE_IS_NOT_READY(5000)
[User] This is a secure base-band chip! Please select the authentication file first
[HINT]
Any one with brick phone can try it?
Click to expand...
Click to collapse
Error known by many people here.
You will find many people in your case here http://forum.xda-developers.com/meizu-mx/general/meizu-mx4-how-to-flash-ubuntu-touch-t3210039
No solution to date.
ouigo said:
Error known by many people here.
You will find many people in your case here http://forum.xda-developers.com/meizu-mx/general/meizu-mx4-how-to-flash-ubuntu-touch-t3210039
No solution to date.
Click to expand...
Click to collapse
Bad news
Enviado desde mi GT-I8260 mediante Tapatalk
On SP flash tool you have another preloader and scatter, try to flash it
Naphtha said:
Yes but this is an factory firmware with factory tools. Is impossibile.
Click to expand...
Click to collapse
WHAT PHONE MODEL YOU HAVE ???
IS THIS MEIZU UBUNTU EDITION ?
WHERE YOU BOUGHT YOUR MEIZU PHONE ?
HAVE YOU VISITED BEFORE SERVICE CENTER TO FIX YOUR PHONE ?
ITALIAN
COSA MODELLO DI TELEFONO HAI ???
E 'QUESTA EDIZIONE MEIZU UBUNTU?
Dove è stato acquistato IL TELEFONO MEIZU?
Avete visitato PRIMA DI CENTRO DI ASSISTENZA PER FISSARE TUO CELLULARE?
Naphtha said:
On SP flash tool you have another preloader and scatter, try to flash it
Click to expand...
Click to collapse
Nothing to do
Is there a phisical methode to force the download mode? I remember the samsung galaxy s could enter in download mode with the heat from a hair dryer. Perhaps , removing the battery...
ertog said:
WHAT PHONE MODEL YOU HAVE ???
IS THIS MEIZU UBUNTU EDITION ?
WHERE YOU BOUGHT YOUR MEIZU PHONE ?
HAVE YOU VISITED BEFORE SERVICE CENTER TO FIX YOUR PHONE ?
ITALIAN
COSA MODELLO DI TELEFONO HAI ???
E 'QUESTA EDIZIONE MEIZU UBUNTU?
Dove è stato acquistato IL TELEFONO MEIZU?
Avete visitato PRIMA DI CENTRO DI ASSISTENZA PER FISSARE TUO CELLULARE?
Click to expand...
Click to collapse
Normal MX4 32gb returned from customer service.
Naphtha said:
Normal MX4 32gb returned from customer service.
Click to expand...
Click to collapse
it was official meizu costumer service ?
Hi Everyone
This is Guide how to repair your phone who was dead
My phone doesn't worked for 3 days so i get small trick and successfully repaired from dead
My phone was 5 times not worked like dead,Screen not Works ...only LED works,when i connect to pc usb device not recognized and nothing....
Explanation about my Problem:
IN MY CASE!
and the worst In my case Power button and Volume Buttons doesn't working so i open the BACK COVER eject the cable from volume button and insert small cable in slots to cover the pins like pressing volume up and down and finally connected to pc with usb
So we are starting the GUIDE:
1.First you need the drivers so you can get from this https://drive.google.com/folderview?id=0B1T7tp6tJ_3kX3p6SUxWb2NfWTQ&usp=sharing
2.After you installed the Drivers go to. Download mode if not goes try this... Press Volume UP and Volume DOWN and connect to usb to your pc
3.Go to device Manager to view the Port ,so the port can be "Android HS-USB QDLoader 9008 (COM3)"
4.Download the Panasonic Firmware Eluga and Extract (don't worry this is the same like idol 3 only name changed)https://docs.google.com/uc?id=0B01OmzpKE6vAVDhaSFN2aVFzaVU
5. After Extract you wil find EB-90S55EWLv1009.exe so run as administrator wait to load data
6.select 6045 and in the list down you can find your phone
7.and press the button "download"
8.So process starting ..indetifying your device you will get informations about imei..rooted or no .....
9.so automatically started to flashing the firmware (my it's go to 45 % and then i get error)
10.Don't worry press the button Reboot Device
11.and your device will reboot and you will view 'the screen powered by android and then panasonic so i get message Encrypted device just click the button "reset" and automatically device will be reseted and when wil finish with reset automatically reboots and wait to first boot you will get welcome screen set up and finished.....
12.So device successfully repaired from dead
If you want to go to CM or Stock for Idol 3
-i will write guide to unlock bootloader and flash TWRP recovery
-You must have Minimal Adb and Fastboot
-type "adb reboot-bootloader" to reboot into bootloader. The device should reboot to the screen showing " .powered by android". This is bootloader mode.
-Then type "fastboot -i 0x1bbb devices" should show some numbers and "fastboot" after the numbers
-Type "fastboot -i 0x1bbb oem device-info" shows device info including bootloader status (e.g. locked).
-Type "fastboot -i 0x1bbb oem unlock" to unlock the bootloader; after this you should get, for device info,
-Type "fastboot -i 0x1bbb oem device-info" and you should see "Device unlocked: true"
-You successfully unlocked the bootloader one step more to flash the recovery
-Download the TWRP RECOVERY FROM THIS LINK:
https://www.androidfilehost.com/?fid=24421527759881858
-Then copy from when you downlaod and paste the recovery in C:\Program Files\Minimal ADB and Fastboot
-Press Shift in the directory and click Right on mouse and open command promt here
-Type fastboot -i 0x1bbb flash recovery twrp-3.0.0-1.img or fastboot -i 0x1bbb boot twrp-3.0.0-1.img (if you want to test before installation)
-so successfully installed recovery and flash CM Or whatever you want
[/SIZE][/COLOR][/B]
Sorry for Grammatical Errors!
This guide will repair from dead....
in my case , buttons also doesn't work , how did you opened the back cover?
xZrender said:
in my case , buttons also doesn't work , how did you opened the back cover?
Click to expand...
Click to collapse
here's video how you can open
https://www.youtube.com/watch?v=FrFE8FdTXrY
Alek Dev said:
Hi Everyone
IN MY CASE!
and the worst In my case Power button and Volume Buttons doesn't working so i open the BACK COVER eject the cable from volume button and insert small cable in slots to cover the pins like pressing volume up and down and finally connected to pc with usb
Click to expand...
Click to collapse
i opened back cover , but how did you press the volume button , it doesnt work for me , i ont know what to do ;/
xZrender said:
i opened back cover , but how did you press the volume button , it doesnt work for me , i ont know what to do ;/
Click to expand...
Click to collapse
Eject cable from motherboatd....insert small cable in slots to cover the pins like pressing volume up and down and finally connected to pc with usb
problem with idol 3 4.7 6039K
Hi there,
I don't know if this is the correct section, I hope so, otherwise I really appreciate you can drive me to the appropriate one, it's new for me this forum!
I have an idol 3 4.7, where I have installed kingroot and after I took out (I didn´t reset the phone, Just unistall the app),
yesterday i received the update system message, I imagine for the marshmallow update, so I say Yes, install it.
But the phone entered in bootloop. I only have the initial screen with the options as Reboot system, adb and so on.
I tried to wipe but nothing. So now my phone stucked. I tried with an assistance center in Quito but they could't
My questions are:
may I use this system for 6039K?
Or does anybody hear about a solution in this case?
Should I open and take out the battery?
Please, any suggestion will be really welcome in order to make the phone work again.
P.
nipozzano said:
Hi there,
I don't know if this is the correct section, I hope so, otherwise I really appreciate you can drive me to the appropriate one, it's new for me this forum!
I have an idol 3 4.7, where I have installed kingroot and after I took out (I didn´t reset the phone, Just unistall the app),
yesterday i received the update system message, I imagine for the marshmallow update, so I say Yes, install it.
But the phone entered in bootloop. I only have the initial screen with the options as Reboot system, adb and so on.
I tried to wipe but nothing. So now my phone stucked. I tried with an assistance center in Quito but they could't
My questions are:
may I use this system for 6039K?
Or does anybody hear about a solution in this case?
Should I open and take out the battery?
Please, any suggestion will be really welcome in order to make the phone work again.
P.
Click to expand...
Click to collapse
Hello
This Guide only works with Idol 3 5.5
but i will explain how to restore your device
Can you try with Mobile upgrade Q to restore,if doesn't work
Use this guide from wiemar ,it should help to you because it's for your model
http://forum.xda-developers.com/showpost.php?p=63709274&postcount=113
If you any questions ask me
Hi ! I follow the guide up to the section 9, unfortunately, in the Panasonic Firmware Eluga and Extract after pressing download it stops after 2% and I have got the error message "load nprg error error code 5002". Does someone know how to fix that ?
Thanks !
Error
I get: "Master Clear: FAIL Flash Status: [COM3->PC[3]] COM3->PC[3] failed to erase misc (Error code = 40016) " :crying:
Now I get the same error that matcail... did you solved it ???
Good tutorial but it does not help me. My phone keeps on rebooting.
Schumi_wk said:
Good tutorial but it does not help me. My phone keeps on rebooting.
Click to expand...
Click to collapse
Tell me info About your phone? Model,Country,ROM...../?
All is standard, no root, no twrp and the latest software from alcatel, the model is 6045Y. But all of a sudden my phone decided to random reboot and it didn't stop
So i looked to unbrick it and came with a couple of options, first i tried to sideload software but that didn't work, than i tried it with Mobile upgrade from alcatel and that didn't work.
Than i saw this thread and tried it twice but after Panasonic and the sound it starts to reboot again. Now i'm trying again with Mobile upgrade.
All that is changed is the recovery interface it looks now like it is from MM.
Schumi_wk said:
All is standard, no root, no twrp and the latest software from alcatel, the model is 6045Y. But all of a sudden my phone decided to random reboot and it didn't stop
So i looked to unbrick it and came with a couple of options, first i tried to sideload software but that didn't work, than i tried it with Mobile upgrade from alcatel and that didn't work.
Than i saw this thread and tried it twice but after Panasonic and the sound it starts to reboot again. Now i'm trying again with Mobile upgrade.
All that is changed is the recovery interface it looks now like it is from MM.
Click to expand...
Click to collapse
More Looks like Hardware Problem Try again with Mobile q if not works...Send to warranty repair.....
Alek, thank you for this great guide. It saved my 6045k model.
I was messing around with AlekOS 3.0, had issues with lock screen and experimented with modems. I managed to permanently disable secondary sim slot (was using famewolf's modem backups). I forgot to copy modem.img backup to my PC! Also tried bunch of TWRP backups with no luck. My last hope was Mobile Upgrade Q and reverting back tu 5.0.2. Unfortunately with no success (only one sim slot is recognized again).
Finally I found this thread, followed the guide and I can confirm that it did solve sim issue. The setup finished with no errors that you mentioned. It got stuck at 45%, but after a while (10min) it completed successfully.
Cheers!
I'm in the same situation as you,but my problem is that Panasonic Eluga doesn't recognice my devide,drivers are correctly installed,I checked everything but nothing:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I´ve tried everything to downgrade my device (Mobile Q doesn't work) but nothing :crying:
peito said:
I'm in the same situation as you,but my problem is that Panasonic Eluga doesn't recognice my devide,drivers are correctly installed,I checked everything but nothing:
I´ve tried everything to downgrade my device (Mobile Q doesn't work) but nothing :crying:
Click to expand...
Click to collapse
You must do something Wrong...Press Pwr button and Volume up and down and thern connect to PC and then you will get RED SCREEN....Press Volume Up until you get Black screen and then press Download and if you get again same Send me Pm with Teamviewer ID AND PASS and i will try to help you
eXoSaX said:
Alek, thank you for this great guide. It saved my 6045k model.
I was messing around with AlekOS 3.0, had issues with lock screen and experimented with modems. I managed to permanently disable secondary sim slot (was using famewolf's modem backups). I forgot to copy modem.img backup to my PC! Also tried bunch of TWRP backups with no luck. My last hope was Mobile Upgrade Q and reverting back tu 5.0.2. Unfortunately with no success (only one sim slot is recognized again).
Finally I found this thread, followed the guide and I can confirm that it did solve sim issue. The setup finished with no errors that you mentioned. It got stuck at 45%, but after a while (10min) it completed successfully.
Cheers!
Click to expand...
Click to collapse
Alek Dev said:
You must do something Wrong...Press Pwr button and Volume up and down and thern connect to PC and then you will get RED SCREEN....Press Volume Up until you get Black screen and then press Download and if you get again same Send me Pm with Teamviewer ID AND PASS and i will try to help you
Click to expand...
Click to collapse
That is exactly what I'm doing,entering in Download mode and then download in the Panasonic software,but nothing,the program cannot read my phone,I'm really tired of trying this,I will stuck in your Alek rom (btw,no matter how many times I flash your modem,I cannot get the lock screen ).Ty anyway Alek and keep it up!!!!
Was on alek 3.0 before bootloop appear after a strange warning on android about battery, now got bootloop, no twrp access etc
try ur solution but after 45% and error, reboot and no screen about panasonic only bootloop
11.and your device will reboot and you will view 'the screen powered by android and then panasonic so i get message Encrypted device just click the button "reset" and automatically device will be reseted and when wil finish with reset automatically reboots and wait to first boot you will get welcome screen set up and finished.....
Click to expand...
Click to collapse
already tried SUGAR+QCT_SP+v10.5.1(4pda source) and mobile upgrade q 5.0.9, both finished without error after 100% but still bootloop
i think it s total broke with motherboard pb or battery
thorfr said:
Was on alek 3.0 before bootloop appear after a strange warning on android about battery, now got bootloop, no twrp access etc
try ur solution but after 45% and error, reboot and no screen about panasonic only bootloop
already tried SUGAR+QCT_SP+v10.5.1(4pda source) and mobile upgrade q 5.0.9, both finished without error after 100% but still bootloop
i think it s total broke with motherboard pb or battery
Click to expand...
Click to collapse
Looks Like Problem With Motherboard and Battery ..you can try again with Panasonic Firmware Tool and if this not help Send it to Warranty Repair
ok i m gonna send it to warr:crying:antly
retry mobil q upgrage wo success bootloop again
I received my Redmi 4 Prime today and it came with a vendor ROM. Mi Unlock won't work with it, so I need to flash the China dev ROM in EDL mode in order to unlock the bootloader. However, when I issue "adb reboot edl", the phone reboots, but there's no red LED. When I attempt to flash the official ROM with MiFlash, it fails. I'm left wondering if it's a driver issue or if for whatever reason, it's not entering EDL mode. My Redmi Note 3 Pro displays a red LED when it's in EDL mode.
Can anyone help? Thanks.
EDIT: I tried a different USB port and it worked. I hope that's helpful for someone else. Still no red LED in EDL mode though.
Redmi 4 Prime doesnt display red led on EDL. It just shows up like Qualcomm 9008 on device manager.
pilililo2 said:
Redmi 4 Prime doesnt display red led on EDL. It just shows up like Qualcomm 9008 on device manager.
Click to expand...
Click to collapse
Thanks. Have you had any issues with the notification LED?
I'm running the latest ROM from xiaomi.eu.
It doesn't flash for missed calls, regardless of which colour I choose. It only flashes for messages if I use the stock messaging app. If I enable the LED within Chomp, with Light Manager or Light Flow, it doesn't work. Previously, when I've used MIUI, I've used the built-in tool to change the colour of missed calls, messages and calendar notifications, but it won't work. It comes on when charging, however, so I know it works.
Bricked Redmi 4 Prime
Does anyone have any idea on how to unbrick a redmi 4 prime?
It's completly bricked and I've tried everything:
-> EDL cable -> doesn't work
-> Pressing buttons tutorial -> doesn't work
My driver is only the QUalcomm 900E, I can't force it to get the 9008...
I'm so frustrated I just want to smash it
If you have any ideas, I would be glad to hear.
ratomike said:
Does anyone have any idea on how to unbrick a redmi 4 prime?
It's completly bricked and I've tried everything:
-> EDL cable -> doesn't work
-> Pressing buttons tutorial -> doesn't work
My driver is only the QUalcomm 900E, I can't force it to get the 9008...
I'm so frustrated I just want to smash it
If you have any ideas, I would be glad to hear.
Click to expand...
Click to collapse
I was in the same situation as you, but I've found this as a solution and I was SO happy I could make it work... You should try that out, hope it works for you as well.
He said the deepflash cable doesnt work, he is on diag mode (because he probably flashed the wrong rom). You need to follow this to get out of 900E
https://xiaomi.eu/community/threads/guide-testpoint-xiaomi-redmi-4-prime-unbrick-qh900e.37478/
pilililo2 said:
He said the deepflash cable doesnt work, he is on diag mode (because he probably flashed the wrong rom). You need to follow this to get out of 900E
https://xiaomi.eu/community/threads/guide-testpoint-xiaomi-redmi-4-prime-unbrick-qh900e.37478/
Click to expand...
Click to collapse
I mean I was in the same situation as him, because I've also made a deep flash cable but couldn't get it working for the first couple of times, because I was doing it wrong. You don't have to disassemble your phone, just follow the instructions in the post that I've linked in my previous reply, it worked for me.
Thanks for the replies, I will try 1st without disassembling , if it doesn't work I will try to disassemble it.
ardrift said:
I was in the same situation as you, but I've found this as a solution and I was SO happy I could make it work... You should try that out, hope it works for you as well.
Click to expand...
Click to collapse
This and that comment you've posted saved my phone from hard brick!
The exact steps mentioned there didn't work after trying several times, so what I've done is (some of the steps are copied from OP):
Created a deepflash cable (tl;dr get a data cable and uncover the green + black cables. easiest way to uncover without cutting them is by burning the plastic)
Started the phone in fastboot mode (PWR + volume down)
Connected the phone to the computer using the deepflash cable (don't short the cables yet),
used "fastboot reboot" to restart phone.
Quickly short GND and D+ for a few seconds AND click both volume_up+volume_down, then windows installed HS-USB QDloader 9008 driver
I've flashed the phone with fastboot global rom and lost unlock status :/
Pumpino said:
I received my Redmi 4 Prime today and it came with a vendor ROM. Mi Unlock won't work with it, so I need to flash the China dev ROM in EDL mode in order to unlock the bootloader. However, when I issue "adb reboot edl", the phone reboots, but there's no red LED. When I attempt to flash the official ROM with MiFlash, it fails. I'm left wondering if it's a driver issue or if for whatever reason, it's not entering EDL mode. My Redmi Note 3 Pro displays a red LED when it's in EDL mode.
Can anyone help? Thanks.
EDIT: I tried a different USB port and it worked. I hope that's helpful for someone else. Still no red LED in EDL mode though.
Click to expand...
Click to collapse
Follow this: youtu. be/E5r05IzVnTg
I can't post this link, remove the space after the "."
But, before of connecting the device to pc, you have to remove the battery connector. One in the center, just above the battery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have unbricked my RedMi 4 Pro so.
i can enter edl mode by installing custom adb program (search on xda). simply reboot device to bootloader and run custom adb program, type 'fastboot reboot edl'.
EDL mode unavailable on new Redmi 4 Prime
Hello all,
I have just received a new Redmi 4 Prime from GeekBuying.com.
It came with official Global 8.1.2, but to make sure I was not on a vendor version I downloaded official one again and updated.
First, I appear to be unable to unlock the phone, stuck at 50% claiming a mismatch between accounts. Strange as I unlocked my Redmi Note 3 Kate without issues a while ago so the account is enabled for unlocking. I do have USB debugging and OEM unlock enabled in developer options.
So next step, I would like to try unlocking from the Chinese Developer ROM, but it seems it is impossible to put this phone into EDL mode.
I have tried from the recovery mode (volume up+power) but when I click the "download" button it just reboots to normal MIUI. If I use a modified fastboot command which can be used to send "fastboot reboot-edl" it also just reboots to normal MIUI. Even "adb reboot edl" just reboots to the homescreen.
Is EDL locked in newer versions of this phone?
dandodex said:
Hello all,
I have just received a new Redmi 4 Prime from GeekBuying.com.
It came with official Global 8.1.2, but to make sure I was not on a vendor version I downloaded official one again and updated.
First, I appear to be unable to unlock the phone, stuck at 50% claiming a mismatch between accounts. Strange as I unlocked my Redmi Note 3 Kate without issues a while ago so the account is enabled for unlocking. I do have USB debugging and OEM unlock enabled in developer options.
So next step, I would like to try unlocking from the Chinese Developer ROM, but it seems it is impossible to put this phone into EDL mode.
I have tried from the recovery mode (volume up+power) but when I click the "download" button it just reboots to normal MIUI. If I use a modified fastboot command which can be used to send "fastboot reboot-edl" it also just reboots to normal. Even "adb reboot edl" just reboots to the homescreen.
Is EDL locked in newer versions of this phone?
Click to expand...
Click to collapse
AFAIK EDL disabled since 8.1.2 global rom, however I successfully unlock while using 8.1.2 global rom, by removing my other devices in mi account page and use account number instead of email/phone.
Btw if you really need EDL, you must create a deepflash cable. I only use fastboot to install rom, never had a problem, so i never had to do EDL.
dels07 said:
AFAIK EDL disabled since 8.1.2 global rom, however I successfully unlock while using 8.1.2 global rom, by removing my other devices in mi account page and use account number instead of email/phone.
Btw if you really need EDL, you must create a deepflash cable. I only use fastboot to install rom, never had a problem, so i never had to do EDL.
Click to expand...
Click to collapse
Thanks for that. I factory reset and user the account ID number instead of my email address to log into Mi Account. I tried to unlock again and this time it worked.
Very interesting to learn that EDL was disabled since 8.1.2 global ROM.
I just got a new Redmi4 Prime with a chinese vendor rom on 8.2.1.0 and the EDL mode was 'disabled' but managed to get into it by booting the phone to fastboot and typing :
fastboot oem edl
Phone rebooted to black screen and was then able to flash global rom using the MiFlash program.
All good! Even managed to get root (to install AdAway) keeping original recovery by booting phone to fastboot and typing :
fastboot boot your_custom_recovery.img
TWRP booted up and then flashed supersu then rebooted.
Very happy with this phone!
no edl :/
guys, can't get to edl in anyway
deepflash cable not working. testpin near battery not working. testpin that is one and a bit up plus shield to the right- not working. got diagnostics 900e still. stuck at boot loop, MI appears on a second and blank screen. That happend after i tried to flash throught TWRP.
any ideas? fastboot working , but that gives nothing since locked bootloader i think ?
Hi all,
issue: xiaomi unlocker stuck at 50% (presumably due to wrong version)
issue2: EDL mode is not accessible, so no other version can be flashed
solution: log in to the xiaomi unlocker tool using your xiaomi account number, rather than phone number or email address. The account number can be found by logging in through the browser and looking at your account details. This worked for me and allowed the unlocker to reach 100% even though I was running a global stable 8.2 rom. Then proceed to use fastboot/adb to flash TWRP, no EDL necessary. Hope this works for you.
shoo said:
guys, can't get to edl in anyway
deepflash cable not working. testpin near battery not working. testpin that is one and a bit up plus shield to the right- not working. got diagnostics 900e still. stuck at boot loop, MI appears on a second and blank screen. That happend after i tried to flash throught TWRP.
any ideas? fastboot working , but that gives nothing since locked bootloader i think ?
Click to expand...
Click to collapse
What are you trying to achieve?
You want to use official MIUI? Use fastboot and miflash, it works even your bootloader is locked.
You already unlocked I assumed, since you can use TWRP, then you can boot to twrp and flash rom etc or maybe yoy want to flash twrp on locked bootloader? In that case use official unlock method and login in mi unlocker using your account number.
Deleted.
After a while I managed to revive phone. But now when I want to go into "DOWNLOAD" mode to flash Global stable official rom, the phone simply reboots.
(I can't open separate topic, sorry, I thought I will be able as I wrote)
Hi guys,
It turned out this script can't really unlock the bootloader. Although I didn't see it, my phone must have come with an unlocked bootloader.
I did another test on the same script but for Redmi 4X and the result was the same - can't unlock the bootloader.
So the moderators can delete this topic as it now serves no purpose. There are other topics for flashing TWRP and rooting the phone.
I am sorry for misleading you guys...
Here's how to install TWRP and SuperSu.
I'm not responsible if you brick your phone or lose data. I did a test on mine and all worked fine.
Info found here - (https://www.gizdev.com/root-xiaomi-mi-5s-unlock-bootloader/).
What you need:
1. Mi Flash Tool - Link(or just the ADB driver - Link)
2. Flasher ToolKit for Mi 5s - Link.
3. USB Debugging enabled in Developer Options
Install the Mi Flash Tool or the ADB drivers. Windows might tell you the drivers cannot be verified. Click on Yes to continue with the installation.
Unzip the Flasher ToolKit files to a folder on your computer.
Start with FLASHER TOOLKIT Capricorn.bat.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hit Enter and this is what you'll see:
First you need to unlock the bootloader, so click on 3. Bootloader Utility. - This only really checks if the bootloader is locked or not. Nothing else.
The program will inform that hitting Enter will restart the phone in Bootloader mode.
Once there the unlocking will begin and you'll see this:
Now the phone will restart.
Once it boots up Android, you can continue with the next step - installing TWRP. Now it's a good time to transfer the SuperSu zip file to your phone. In Downloads for example.
Select the first option - Flash ZCX-TWRP 3.0.2.X for Mi 5s.
The image will be transferred and the phone will be restarted in Recovery mode. It might take a while to load TWRP for the first time, be patient.
Now that you're in TWRP, click on Install, select the SuperSU zip file. Once flashed, go back to Reboot, System.
If something fails:
-The ADB drivers didn't work for me so I installed Mi Flash and unplugged/plugged the phone in the USB.
Check in Device Manager if the ADB drivers are loaded for your Mi 5s. If you don't see anything saying ADB, unplug the phone and plug it back in the USB. Or try another USB port. Or try uninstalling the current drivers and reconnect the phone again.
-If you've closed the Flasher ToolKit and you try to start it again, but nothing happens, open Task Manager and kill/end task the adb.exe *32 process.
- If your phone restarts in Recovery, but all you see is the TWRP logo for minutes, give it about 10 minutes. If nothing changes, restart the phone by pressing and holding the power button. Have you unlocked the bootloader first?
It might have been a good idea to take a camera and shoot every step of the process, but I was testing it to confirm it's working. Hence most of the screenshots are from the web.
Anyway, that's what I can think of right now. If I'm missing something or you can't get it to work, let me know.
yes do it plz
Yes, it's a great ideea. Do it pls.
it will be a good start to have a guide here, you should give all the ways you know, including the first step to unlock by contacting xiaomi, however if you find a guide for a certain section you can link to it (or copy it and add a link so it won't be broken) .
It would also be nice to have a guide for major roms, with some optional steps that not all are aware of, like switching to f2fp
Should be ready now. The good thing is that you don't need to contact Xiaomi to unlock the bootloader.
ok so i did everything you told me
but i fail
first i press the 3 and everything was ok my device is unlocked no problem and its restart automatic
next i go to fast boot... and when i press 1 its show me twrp is install
but after that noting happens ... i press vol up and power its go to mi recovery
my phone is on fast boot i check that with cmd
dont know way
eny idea what to do
eny other method ? can i install with mi flash tool ?
im so confuse
Did you see the TWRP logo when the recovery was supposedly installed? Repeat again the TWRP installation and let's see what will happen.
unicastbg said:
Did you see the TWRP logo when the recovery was supposedly installed? Repeat again the TWRP installation and let's see what will happen.
Click to expand...
Click to collapse
no noting show up ? eny other method ?
frozenline said:
no noting show up ? eny other method ?
Click to expand...
Click to collapse
I'd say the recovery image is not getting transferred to your phone. Do you see a confirmation that the img file was sent over? It usually states how much time it took to transfer over.
unicastbg said:
I'd say the recovery image is not getting transferred to your phone. Do you see a confirmation that the img file was sent over? It usually states how much time it took to transfer over.
Click to expand...
Click to collapse
yes exactly its not transferring
---------- Post added at 03:34 PM ---------- Previous post was at 03:01 PM ----------
ok i did it problem was the adb i install naked adb driver its on know...ok so how i install custom rom? its like my other phones but something new in mounting it seed read only ? i had to change that or something? witch to wipe?
When starting TWRP the very first screen asks if you want to mount the partitions in read only mode or full access. And a check box to never show this again. Have you seen that? If not, try to update TWRP to 3.1.x.x, don't remember the exact version, you can find it here, in the Mi 5s section of the forums.
If you get that working, installing a new OS is pretty easy - go to Install, select the ZIP file with the new OS and follow the instructions. You might want to wipe cache and dalvik to avoid force closures after that.
Usually instructions on how to install a specific OS version are found in that OS's forum section.
i all ready do that bye rename and replace the new twrp in the flash kit folder everything is don... what is the best rom right now to install?
That's really up to your preference. I'm on global developer 7.5.25. Some use LOS.
i tried your guide, but i cant unlock bootloader. After i select option 3, the phone restarts and the bunny appears but after that i only receive the message attached.
Can somebody tell me what i do wrong?
What's your current MIUI version?
I'm on 8.2.1.0 and on computer i have Windows 10. I enabled usb debugging and type on add device account
Trimis de pe al meu MI 5s folosind Tapatalk
To be honest I'm not really sure why it doesn't work for you. The phone restarts, so you have the adb drivers.
Here's a little something that deserves a shot - the very first post - http://en.miui.com/forum.php?mod=viewthread&tid=525726&extra=page=1&page=2&mobile=2
I'd love to hear back from you if that worked or not.
i make a request to xiaomi to unlock bootloader and they aproved it in 6 hours, so i will try with mi unlock tool when i get home today. i keep you informed. thx
In managed to unlock with official metod.
Trimis de pe al meu MI 5s folosind Tapatalk
I've taken a look at the code in the script and this method WILL NOT unlock your bootloader. This is only useful for flashing TWRP and rooting a phone, if your phone IS ALREADY UNLOCKED. The third picture provided in the original post is incorrect and that will not be printed on the screen. The script does not attempt
Code:
fastboot oem unlock-go
at any point.
You will probably have to go through the official unlock process.
Hi people, noob user here
My Mate 9 MHA-L09 stays bricked after i rebrand via HWOTA or update by any method, but i can bring it back to life only with IDT and board software (EMUI 5 - Android 7). Tried differents methods with nougat and oreo firmwares:
HWOTA update from sdcard or windows (brick)
Twrp, then supersu or magisk and update zip (brick)
dload folder with sd card upgrade or 3 button method (brick)
fastboot flash images with Huawei Update extractor (brick)
After that, phone stays bricked, no fastboot, recovery, battery charge, nothing. I plug it to usb and its recognized as huawei com usb (without using testpoint), and then i return to the beginning flashing board software (made that like 20 times by now :crying::crying::crying::crying Pleaseee send some help !!
OK I can help you, it's really easy by the way, did you know which version do you have before the disaster?
Version and cust?
lefkiller said:
OK I can help you, it's really easy by the way, did you know which version do you have before the disaster?
Version and cust?
Click to expand...
Click to collapse
Hi, in fact I had no cust because I sent my phone to a technician and he left it like Build System 8.0.0.x(xxx), I couldn't unlock bootloader with dc unlocker because not supported. So I thought the only way was to downgrade with board software and flash new firmware but now I'm in a loop for like 1 week with this problem.
Do you have access to recovery? Bootloader? It allows you flash something?
lefkiller said:
Do you have access to recovery? Bootloader? It allows you flash something?
Click to expand...
Click to collapse
Yes, I can do everything, but after EMUI update process shows "Finished, device will restart" it doesn't, gets bricked. Then I have to flash board software again to boot my phone
OK, what method are you using to flash?
DC Phoenix or dload?
And what firmware are you trying to flash?
Wen all this happens to you what firmware has you in the phone?
Are trying to install your same region?
Answer me all Tha questions and probably I can give you the way to solve you problem
lefkiller said:
OK, what method are you using to flash?
DC Phoenix or dload?
And what firmware are you trying to flash?
Wen all this happens to you what firmware has you in the phone?
Are trying to install your same region?
Answer me all Tha questions and probably I can give you the way to solve you problem
Click to expand...
Click to collapse
HWOTA update from sdcard or windows (brick)
Twrp, then supersu or magisk and update zip (brick)
dload folder with sd card upgrade or 3 button method (brick)
fastboot flash images with Huawei Update extractor (brick)
Click to expand...
Click to collapse
Tried Nougat and Oreo firmwares, rebrand, same model or L29, AL00 (C636, C432, C605). Maybe its an xloader thing, i don't know
OK, but you are not answering my questions, what is you older version, original oeminfo, etc, needed to have success fixing your phone.
Try this:
1 Flash board firmware (idt)
2 Boot on maintenance system and check in manufacturer menu background USB port, manufacturer mode (*#*#2846579#*#*)
3 on HCU client (paid) unlock your phone if needed and fix numbers if your device has Meid use CDMA fix if not use UMTS (imei, model, vendor, country, etc)
Unmark flash as empty board and the opción for QC
4 now you most have a pretty nice Boot loop, so you need to enter fastboot mode, in fastboot mode disconnect the cable USB and press volume bottoms at the same time you are now in fastboot submeno, just luck for shut down opción
5 flash you stock rom in force mode pressing all de buttons at the same time, using a SD card/dload/UPDATE. APP
the rom most be one newest than the one you have before, that's why I ask to you but you don't answer me
That's it, welcome back to your phone
I'm my case I use the rom MHA-L29C605B375 downloaded from androidhost.ru, lock for one whit only 2 archives.
lefkiller said:
OK, but you are not answering my questions, what is you older version, original oeminfo, etc, needed to have success fixing your phone.
Try this:
1 Flash board firmware (idt)
2 Boot on maintenance system and check in manufacturer menu background USB port, manufacturer mode (*#*#2846579#*#*)
3 on HCU client (paid) unlock your phone if needed and fix numbers if your device has Meid use CDMA fix if not use UMTS (imei, model, vendor, country, etc)
Unmark flash as empty board and the opción for QC
4 now you most have a pretty nice Boot loop, so you need to enter fastboot mode, in fastboot mode disconnect the cable USB and press volume bottoms at the same time you are now in fastboot submeno, just luck for shut down opción
5 flash you stock rom in force mode pressing all de buttons at the same time, using a SD card/dload/UPDATE. APP
the rom most be one newest than the one you have before, that's why I ask to you but you don't answer me
That's it, welcome back to your phone
I'm my case I use the rom MHA-L29C605B375 downloaded from androidhost.ru, lock for one whit only 2 archives.
Click to expand...
Click to collapse
Like I said, my phone was running Oreo (I think) and build was System 8.0.0.0xx, could't use themes, bank apps also didn't work, that's why I tried to downgrade so I could flash new firmware :angel: I have no idea what oeminfo was, I'm sorry . I will give a try to HCU
Oeminfo contains model, vendor, country, etc, if you don't know fixed whit HCU, they have tutorial for that
https://hcu-client.com/huawei-phone-country-vendor-repair/
Just follow that and you will be OK, be sure to flash a proper rom, dload method
lefkiller said:
OK, but you are not answering my questions, what is you older version, original oeminfo, etc, needed to have success fixing your phone.
Try this:
1 Flash board firmware (idt)
2 Boot on maintenance system and check in manufacturer menu background USB port, manufacturer mode (*#*#2846579#*#*)
3 on HCU client (paid) unlock your phone if needed and fix numbers if your device has Meid use CDMA fix if not use UMTS (imei, model, vendor, country, etc)
Unmark flash as empty board and the opción for QC
4 now you most have a pretty nice Boot loop, so you need to enter fastboot mode, in fastboot mode disconnect the cable USB and press volume bottoms at the same time you are now in fastboot submeno, just luck for shut down opción
5 flash you stock rom in force mode pressing all de buttons at the same time, using a SD card/dload/UPDATE. APP
the rom most be one newest than the one you have before, that's why I ask to you but you don't answer me
That's it, welcome back to your phone
I'm my case I use the rom MHA-L29C605B375 downloaded from androidhost.ru, lock for one whit only 2 archives.
Click to expand...
Click to collapse
No success on step 5, I tried to install MHA-L09C605B360 (8.0.0.360) with HWOTA, same problem, device restart then hard brick.
Flashed board software again (100th time), HCU thing, dload update (this time with MHA-L09C605B375 8.0.0.375) with 3 buttons and then "Software Update Failed" at 5%
Can you show me the image of HCU Wen you repair UMTS or CDMA
lefkiller said:
can you show me the image of hcu wen you repair umts or cdma
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pabl0cv said:
No success on step 5, I tried to install MHA-L09C605B360 (8.0.0.360) with HWOTA, same problem, device restart then hard brick.
Flashed board software again (100th time), HCU thing, dload update (this time with MHA-L09C605B375 8.0.0.375) with 3 buttons and then "Software Update Failed" at 5%
Click to expand...
Click to collapse
This update is the one whit just 2 files?
Download this https://androidhost.ru/SG5
Okay, after hours of trying, reading a lot of threads, I concluded this:
Neither B360, 361, 362, etc., worked, UNTIL B375. How did I realize that? earlier I said something about the xloader partition, I don't know clearly what it means but what I did was extract the XLOADER partition image from UPDATE.APP of every build (with huawei update extractor). Then I flashed with fastboot (fastboot flash xloader xloaderfile.img). Every image I tried FAILED image xloader1 verification error, until I tried with XLOADER.img from B375, it said OKAY. Finally, as I knew that build would work, flashed the whole firmware (3 files), following this GUIDE from mankindtw. Btw I repaired imei, vendor, country with hcu after flashing board software
Now I have a second problem, I can't unlock my sim. If someone could help me here, HCU says Error, not supported
View attachment 5091113
lefkiller said:
OK, but you are not answering my questions, what is you older version, original oeminfo, etc, needed to have success fixing your phone.
Try this:
1 Flash board firmware (idt)
2 Boot on maintenance system and check in manufacturer menu background USB port, manufacturer mode (*#*#2846579#*#*)
3 on HCU client (paid) unlock your phone if needed and fix numbers if your device has Meid use CDMA fix if not use UMTS (imei, model, vendor, country, etc)
Unmark flash as empty board and the opción for QC
4 now you most have a pretty nice Boot loop, so you need to enter fastboot mode, in fastboot mode disconnect the cable USB and press volume bottoms at the same time you are now in fastboot submeno, just luck for shut down opción
5 flash you stock rom in force mode pressing all de buttons at the same time, using a SD card/dload/UPDATE. APP
the rom most be one newest than the one you have before, that's why I ask to you but you don't answer me
That's it, welcome back to your phone
I'm my case I use the rom MHA-L29C605B375 downloaded from androidhost.ru, lock for one whit only 2 archives.
Click to expand...
Click to collapse
Te lo dije en el número 3, primera linea
Te lo dije en el número 3, primera linea
Click to expand...
Click to collapse
You were right, I should have done that before repair with hcu. "Read sim unlock codes" did nothing, only "direct sim unlock" worked for me.
So, finally after more than a week , what I did was:
Flash board software with IDT and testpoint
Repair phone with "Direct sim unlock" in HCU (paid 3 euro)
Repair umts (imei, model, vendor, country) (paid 8 euro, 24h timed license)
Flashed B375 ROM with HWOTA guide
After boot system, unlocked frp and bootloader, then upgraded to Pie build 9.0.1.189 with HWOTA9 guide as I didn't receive any official update from huawei
Now my phone is receiving ota updates :highfive::victory: thank you so much :laugh:
The step with HWOTA was not necessary, with dload it was more than enough, all the updates came to me until reaching 9.1.0.252, after that I have not received anything else, in FF I see that there is up to 9.1.0.275, I have my doubts whether to do it by dload
lefkiller said:
The step with HWOTA was not necessary, with dload it was more than enough, all the updates came to me until reaching 9.1.0.252, after that I have not received anything else, in FF I see that there is up to 9.1.0.275, I have my doubts whether to do it by dload
Click to expand...
Click to collapse
dload update (this time with MHA-L09C605B375 8.0.0.375) with 3 buttons and then "Software Update Failed" at 5%
Click to expand...
Click to collapse
Dload method didn't make it for me, for sure I missed or did something wrong
lefkiller said:
This update is the one whit just 2 files?
Download this https://androidhost.ru/SG5
Click to expand...
Click to collapse
This works nice whit dload method, just 2 files in it
The important thing is that you managed to recover the equipment and now everything is functional