Related
Anyone have any experience with a Micro USB to USB A Adapter connected to a USB to Serial? I'm waiting on some OTG adapters to test it out, but wondered if anyone had experience.
It seams that the change to the MHL cable is to allow USB on Go with the same cable
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Mr_Maz said:
It seams that the change to the MHL cable is to allow USB on Go with the same cable
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Click to expand...
Click to collapse
I had a bunch this was the case! Thanks for confirming.
Sent from my GT-I9300 using xda app-developers app
But how would one plug a usb cable into the hdmi port?
The_Biz said:
But how would one plug a usb cable into the hdmi port?
Click to expand...
Click to collapse
there is a MHL adapter that gives you a male 11 pin micro USB to female HDMI so you can just plug a standard male to male HDMI cable from adapter to TV.
see:
Samsung Galaxy S III MHL to HDMI adapter
Does anyone know if this new adapter will work with the Galaxy Nexus, as well? Also, does it charge the phone--or at least keep it from being drained--when USB OTG is being used? I've been looking for a way to use USB OTG with a flash drive on my GN while also charging/powering the phone. USB OTG is a real power hog.
It should, but on mine it doesn't.
I've got a new MHL cable and a USB OTG cable in the hope I could plug my MHL into the SGS3, use a powered USB hub connected to the Micro USB on the MHL and then connect a keyboard and mouse into the USB hub, then connect the HDMI to the TV.
For me it doesn't work. I thought this was the whole reason they changed the MHL cable to the new type. Can anyone else confirm?
Logicalstep
can we get an update on this situation here? How
can we get MHL AND USB OTG?
My reading of the link is that the micro USB port has been repinned to provide USB on the go and not that the cable allows for this.On the mhl cable there is a female HDMI port and a micro USB ( both female) which must be used by the charger.
If the usb connection is also female type, we have to use a usb otg cable to get it work. But at the moment my phone also wont recognize any devices -.-' only mhl and nothing else.
I bought this adapter for 25 euros and want to have it working.
I also asked samsung on facebook 'bout this problem, and everything the told me:
Go support site...
very helpful.
I hope the will enable this feature in a future update.
Hi,
I was hoping to use a wired ethernet connection to my N7.
I was reading it was possible and I happen to have the cables from before. A micro usb to usb female and then a usb to ethernet adapter. Mine is based on ADM 8515 and it doesn't work.
I haven't rooted or done anything else yet.
I have seen reports that another usb to ethernet adapter works, based on AX88772.
Anyone managed to get this to work? Does it work out of the box with the AX88772? Anyone managed to get it to work with this ADMTek one, or any other chipset?
Mons
I have not seen or heard what the micro usb will be used for on the NP....
The ADT-1 has a USB port and all it can be used for is a keyboard/mouse currently. I'd kill for OTG support. That said though, the ADT-1 also comes with a splitter for the power that adds an additional USB port to connect to your computer to access it via the SDK. So, it could be very much the same setup, or something completely different.
Interesting... You would think they would list the use for it.. maybe these OTG cables i have will come in handy..
It's been said that usb to ethernet adapters will work.
Read the update at https://plus.google.com/110558071969009568835/posts/dpSj5KtYP97
Hey pleasecan u help me in downgrading lg g3 stylus by saying the steps
Sent from my LG-D690 using XDA Forums
jestexman said:
I have not seen or heard what the micro usb will be used for on the NP....
Click to expand...
Click to collapse
You can connect an OTG cable to it. I connected a USB 3.0 HUB + Ethernet adapter to the OTG cable and connected my keyboard & mouse to the hub and a 64 GB micro SD card for extra storage. I also used the the ethernet port so now I don't need to connect through WiFi
lost2030 said:
You can connect an OTG cable to it. I connected a USB 3.0 HUB + Ethernet adapter to the OTG cable and connected my keyboard & mouse to the hub and a 64 GB micro SD card for extra storage. I also used the the ethernet port so now I don't need to connect through WiFi
Click to expand...
Click to collapse
What OTG cable and USB 3.0 HUB+Ethernet adapter are you using?
lschroeder said:
What OTG cable and USB 3.0 HUB+Ethernet adapter are you using?
Click to expand...
Click to collapse
I'm using a Ugreen OTG cable. I bought the 2 pack. The usb 3.0 hub is from Inateck. Links are below.
http://www.amazon.com/Ugreen®-Adapter-Samusung-Android-Function/dp/B00LN3LQKQ
http://www.amazon.com/Inateck-Gigab...id=1446168331&sr=1-2&keywords=inateck+usb+3.0
Hi guys!
I want to use wired ethernet on my nintendo switch (installed android) both docked and handheld. I want to buy a TP-link TP-Link UE300 USB3.0 - Gigabit Ethernet adapter and a Gembird A-OTG-CMAF2-01 0.2m USB Type-C USB-A adapter. It is simple plug and play will work, or I must do somthing? Anyone can help me? Sorry for my bad english.