Database Users

[Q] Manual update to 8.4.4.5 (3.1) fails :-(

I'm in the UK and have been waiting for nearly a month for an OTA firmware update, but it's not happened. So I've been trying to do a manual update. I've not managed to make that work though, even after a factory reset. I've got a MicroSD card with the following on it:
/ASUS/Update/WW_epad-user-8.4.4.5.zip
The Transformer correctly recognises the update when that's inserted so I tell it to update. It reboots to the updating screen, but after 10 to 15 seconds it fails with an exclamation mark sign next to the droid. Upon forced reboot it says "System has been updated successfully" even though it hasn't - the build number is still showing it's on 8.2.3.9. However it doesn't notice the update on the MicroSD card any more and I have to do another factory reset before I can try again (with the same results).
Please can someone suggest what I should try next?

Hi! I'm new to the transformer, but was doing a manual update yesterday. There was a pdf manual also in ASUS website where it said that you should UNZIP the file inside your microsd directory. If you check the zip, you have a main directory called ASUS, so make sure you have MicroSD/ASUS and you should be good to go. I did it that way.
For the zip file, get something in the android market any would do.
Ahhh!! VERY important, did you make sure you downloaded the update that goes with your tablet? You have a CN, TW, US, DE and I guess another version. Check out your ROM under settings.
Good luck!

Try this: http://forum.xda-developers.com/showthread.php?t=1123429

I had the exact same issue with my US TF. I re-downloaded the file again and tried it and it was successful.

I have unzipped it already - the file I downloaded from ASUS was UpdateLauncher_WW_epaduser8445.zip, which contains /ASUS/Update/WW_epad-user-8.4.4.5.zip file (that zip file in turn contains a big blob image plus various meta data). The "WW" is correct for me as there's no specific "UK" firmware.

So I read about NVFlash that @ondoy1943 linked to and was just getting my head round doing that. But first I thought I'd give @Oyeve's suggestion of re-downloading a go, however just after factory resetting to do that the OTA update suddenly happened!
If I'm feeling adventurous in the future I might install a custom ROM using NVFlash, but for now I'll stick with the stock 3.1.

"Network unavailable" on manual System update attempt

Just got my Axon 7, shipped from DE to UK, thought I'd try manual software update.
Current version listed as ZTE A2017GV1.0.0B06
It times out with Network Unavailable despite the fact it is connected to WiFi and Chrome works fine as well as everything else needing internet connections.
I am on Three UK, haven't tried updating without a SIM ... is that worth trying? I did see at initial setup I was prompted to accept some sort of 3UK profile though I assumed this is just APN/MMS stuff.
Anyone else having similar problem trying to update?
I see talk of updating to B08 etc, from 2017G --- is 2017G same as 2017GV1... wouldn't want to assume anything this early on in my game
TIA for any tips/advice.
Am really liking this phone though, might be nice to get latest update for security mainly, not sure if many features are added?

Same issue here as it happens, though I'm currently trying to update WITHOUT a sim (didn't appreciate it was nano so new one on order!).
I was thinking it maybe needed one to be present to update, but clearly that's not the case.

nstirton said:
Same issue here as it happens, though I'm currently trying to update WITHOUT a sim (didn't appreciate it was nano so new one on order!).
I was thinking it maybe needed one to be present to update, but clearly that's not the case.
Click to expand...
Click to collapse
Can't speak to the EU version, but I was surprised when my A2017U would not complete initial setup (& update) without the SIM, although wifi was strong. All completed quickly as soon as I popped in the SIM.

Hi,
I have the same issue here.
I've just bought A2017G from Italy (Amazon) and I live in France. Can't have the upade to B08. There is always this message "No network" after a minute of searching. I tried with 4G and Wifi and there is the same issue!

Also can't connect
Same issue here. I am already on B.08 and have wifi/Sim in place.

Mysterious problem
I have tried many solutions but I wasn't able to update :
- used three different sim cards from 3 operators
- removed sim card and worked only on wifi
- used VPN
- tried to update via SD card form the update page and from recovery
... Unsuccessful !
Anyone have idea?

I'm also having the same problem. I live in Sweden and I just got the phone today. Would be nice if I could update sometime soon.

A2017g b06
Greenland here, I also have problems with the connectivity

Maybe ZTE is updating its servers so that the updates can finally deploy at the same time, the same version, for everyone.
Or, maybe... they are silently getting rid of Adups and moving to another kind of upload process, before **** hits the proverbial fan.
Also, Global Axon 7 here, brought via Amazon.es, sent from Germany and now used across Portugal/Spain. Running 0B08.

deoki said:
Maybe ZTE is updating its servers so that the updates can finally deploy at the same time, the same version, for everyone.
Or, maybe... they are silently getting rid of Adups and moving to another kind of upload process, before **** hits the proverbial fan.
Also, Global Axon 7 here, brought via Amazon.es, sent from Germany and now used across Portugal/Spain. Running 0B08.
Click to expand...
Click to collapse
I can understand that, but even if we put the B08 update file downloaded from ZTE support in SD card, the update can't be processed.

Hello, I had the same problem, I reinitialized the Axon 7, and I copied the file update.zip B09 on the phone, it recognized and installed the file (I was on the b08 before)

Hallo, i have the same problem with update, I have B06, somebody can give me a link to download the latest firmware and how to install it.

Yansin said:
I can understand that, but even if we put the B08 update file downloaded from ZTE support in SD card, the update can't be processed.
Click to expand...
Click to collapse
hmm I put a b09 in the sd card and it updated no problem

Solution found!
I’ve already found the solution for the manual upadate from SD card and it’s easy to do.
Theses instructions are not mine and I’m not responsible of what you do with your phone. I found them inside the update file that I Downloaded then I unzipped.
You will find a PDF document called “ZTE A2017G Upgrade Guide (through an SD Card).pdf”. You can use it to do the upgrade step by step.
Till now, all was OKEY: backup is very quickly with Zte app. The update take about 5 minutes, than the phone restarts automatically.
If you cannot find the B08 update file, try to download it from here: http://www.ztedevice.com/support/detail?id=98CEB24F9FFD433EA99EC424163149A6
Here are the steps (exactly as mentioned in ZTE Upgrade Guide)
ZTE V7 Upgrade Guide (Through an SD Card)
​1. Backing Up the Data
1) Download the upgrade package.
Open http://www.ztedevice.com.cn/support and download the upgrade package (update.zip) that matches your phone model. If the downloaded package is not update.zip, unzip the package to obtain update.zip.
Ensure that your micro SD card is at least 3GB.
2) Remove the SIM card before the upgrade. Back up the data and APPs in your phone by using the built-in Backup function. To enable the built-in Backup function of your phone (an SD card must be inserted), select
Backup and Restore from the main menu。
3) Perform data backup.
Note:
You should not remove the SD card during the backup process. To avoid data lost, it is not recommended to cancel the backup process.
4) Verify that the update.zip file in the root directory of the SD card
matches the model of the phone. Do not modify the file name and extension name of the files in the upgrade package.
5) Verify that your phone has enough (at least 30%) power. Charge the phone if required. To avoid data lost or upgrade failure, it is not recommended to upgrade your phone through an SD card when the phone is being charged.
Note:
You should not perform any other operation on the phone during the upgrade process. To avoid upgrade failure, do not forcibly remove the battery.
A normal upgrade should be completed in 2-3 minutes. If the phone does not reboot or show any response in three minutes, you should perform the upgrade process again. If the phone cannot be started, perform a forced upgrade. If the forced upgrade does not work, you should contact an after-sale service agent for support.
2. Upgrade Description
There are two upgrade methods: normal upgrade and forced upgrade.
If the phone cannot be started properly, for example, the phone cannot be started, or the phone does not enter stand-by state, perform a forced upgrade. If the phone can be started properly and the Settings menu can be selected, perform a normal upgrade.
3. Upgrade Steps
A. Normal upgrade (the primary upgrade method)
1) Download the upgrade package that matches the phone model from ZTE official website (http://www.ztedevice.com.cn/support/), extract update.zip from the package, and copy update.zip to the root directory of the SD card (the file name must be update.zip
2) Select System Manager > File Manager> SD Card from the main menu, and verify that the update.zip file in the root directory of the SD card is proper.
3) Tap the main screen is displayed. Tap and select SETTINGS >All setting > Updates>,
4) Click INSTALL, The phone automatically powers off and reboots. the SD
card upgrade screen is displayed,
After the phone is upgraded, it is rebooted again. After the phone starts properly, it is recommended to manually restore the phone to its original factory default settings. The phone is upgraded properly and can be used.
B. Forced upgrade (for the phones that cannot be started or the phones that cannot enter standby state)
1) For a powered-off phone, press and hold both the volume key + and power
key to enter into Recovery mode.
2) Press the volume key - to select apply update from sdcard, and press the power key to confirm it.
3) Press the volume key - to select the update.zip file, and press the power key to confirm it. The phone completes the upgrade process in about three minutes.
4) On the Upgrade Complete screen, select reboot system now and press the power key to confirm it.
4. (Optional) Restoring the Data
If you have backed up data before upgrading your phone, restore the data.
1) Backup and Restore important user information.
2) Perform data restoration.
Note:
Do not remove the SD card during the restoration process. To avoid data lost, it is not recommended to cancel the restoration process.
An interesting thread: http://forum.xda-developers.com/axon-7/how-to/manual-updating-a2017g-t3519104 !

Thanks, but i tryed to install this update but I get an error that it is not for my phone, i have ZTE A2017G_1817 buildnr. ZTE A2017GV1.1.0B06
Have I don anything wrong or do I need an other file
Regards

Same problem on my axon 7 a2017g - updated via updater from b06 to b08 - network unavailable trying to check update to b09

Same white me, then I tryed it with the downloaded updat.zip from B08 and he start the update bute later stopt whit the message this file is not for my phone ??
Where can I download the B09 update.

keesvl55 said:
Same white me, then I tryed it with the downloaded updat.zip from B08 and he start the update bute later stopt whit the message this file is not for my phone ??
Where can I download the B09 update.
Click to expand...
Click to collapse
The file is on ztedevice (link in thread) but i think (as some of other users) that this patch is only for Spain - don't know that for 100% but most ppl that can upadate it with OTA are located in Spain. Also I still get "network unavailable" when I trying to check update (location Poland, phone from UK). But you should can update from B06 to B08 as I can without any doubts via OTA.

MrMD69 said:
The file is on ztedevice (link in thread) but i think (as some of other users) that this patch is only for Spain - don't know that for 100% but most ppl that can upadate it with OTA are located in Spain. Also I still get "network unavailable" when I trying to check update (location Poland, phone from UK). But you should can update from B06 to B08 as I can without any doubts via OTA.
Click to expand...
Click to collapse
Here the problem is solved, this morning the ota update worked en now he is installing B08.
I downloaded B09 en wanted to go install it and than the give me the original B08 update in the screen, let see how it works.

As for 1.01.2017 update check start working for me - no more "network unavailable" just "up to date" at B08 a2017g.

Recovery bricked after Nougat update?

First excuse me for opening an other thread like this, i think i have read all other threats regarding my problem, but none have the same situation
My Huawei M3 Wifi (BTV-W09) seems semi bricked after installation of Nougat Update.
The Installation (Force Install with dload) gave me an error and also while boot i got the error message: "Your device has failed verification and may not work properly."
I have the option to press "Powerbutton" and the device will boot up. I checked the Version and it showed android 7 + EMUI 5. The only problem was that almost every system app was missing, like keyboard, calendar etc. (playstore was there)
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error. I have ADB/Fastboot installed and tried some different things like flashing/unbricking it with "Huawei Multitool" where you can extract like boot.img or recovery.img and try to flash it.
Also getting an error. I can access eRecovery witout problems, the option to fix it by itself by wifi doesn`t work. I can´t access "normal" recovery and i think there is the problem (may got bricked while flashing Nougat?) I think its recovery problem, cause when i boot it up to the "half-installed" Android and go into setting "hard-reset" option i know it would boot up intoi recovery and would erease everything, while bootup it shows error "reset failed".
In fastbootmode i see bootloader: unlocked FRM: unlocked
I tried to install TWRP recovery with adb but get error: adb remote command not allowed
I downloaded like 15 different Android Versions 6+7 Emui 4.1+5 to try with force update but none worked, may i have to flash special version of recovery first?
I just want a normal version of android 6 or 7 i dont mind but at the moment with half working 7 "without" systemapps its a hardtime.
I hope someone can help me.
This isnt my first android device and im not a total noob i unlocked bootloader and flashed kernels on many other phones but with the W-09 where i did nothing special i dont get why "recovery got broken"
Thanks in advance

You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.

nicolap8 said:
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
Click to expand...
Click to collapse
thanks for your anwser, i read that so i also tried unlocking it "again" and it quotet it is also unlocked in adb. I also know that there are 2 packages. That you need TWRP i didnt know thanks so i am a bit smater now. I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.

kivi90 said:
I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
Click to expand...
Click to collapse
This is nonsense. Unlock, install the right TWRP then install the second zip package.

nicolap8 said:
This is nonsense. Unlock, install the right TWRP then install the second zip package.
Click to expand...
Click to collapse
i cant unlock cause i dont have the code, on the huawei page i try do make an account and get the code by providing the necessary information.
I just uploaded a picture, i choose "before EMUI5" cause this is the only option i can choose "tablets". --> i choose "tablet wifi" , enter product model "BTV-W09" then the serialnumber i can see in setting: 28D6R17316XXXXXX but then i have the problem to input product id, it say i can get it through "Dialer" app (which i dont have in wifi model ) or the calculator. Problem is in my damaged installation there is no huawei calc, other calcs from store dont work (read that problem in other threats) I tried many apps from appstore to get a product ID but huawei site keeps saying wrong product ID =/
With the program DC Unlocker i am able to see a MEID i dont know if its the right one, i tried my luck with the Product ID Generator from Huawei but it doenst work. (device not supported)

It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!

nicolap8 said:
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
Click to expand...
Click to collapse
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.

Did you ever find a fix
Did you ever find a way to fix this. I'm in the same situation. I even did a VPN on my router to give me a Hong Kong address for erecovery and that still didn't work. I have the exact same product. Like you I tried to various attempts to download a new recovery, but nothing works. Nice hardware, but some of the worst software/firmware I have ever dealt with since starting with the first release of Android on the HTC Hero.

kivi90 said:
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Click to expand...
Click to collapse
I had mostly the same problem. I rolled back to 4.1 using the rollback and the actual 4.1 update.app. I think that puts you on C100 if I remember right. Tablet I have is C128 (USA) but no problem for this step. Get the Product ID from the calculator. Allow OEM unlock in the settings, then unlock it using the unlock code. Email yourself the unlock code because who knows if their website will even be functional next time. Alternatively you can extract the stock calculator from the update_data_usa.zip or whatever and try to use DC with 5.0. That second update zip does not install properly via the dload method, so a bunch of stock apps don't get installed. You can kind of hack it and flash it via TWRP but I didn't do it that way.
Or...you can use firmware finder to force an OTA from 4.1 right up to 5.0 (350), then take that last partial OTA to 351 after as well. The way to do that is via DNS in firmware finder. Find the Full OTA in firmware finder you want, send it to the updater by changing your DNS the way it tells you to, and when it does the OTA, everything will be properly installed basically the official way. Good as new. Flash TWRP to recovery2 and replace the erecovery. Keep the stock recovery as is. Install magisk. Golden.
---------- Post added at 03:36 AM ---------- Previous post was at 03:26 AM ----------
kivi90 said:
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error.
Click to expand...
Click to collapse
Also, as far as the rollback, you need to do the first one (the C900 which is just a compatibility fix to allow rollback, previously used by beta testers I believe). Then you need to do the second one, the C100. If it is getting stuck, try downloading it again and be sure you don't have anything else in the /dload directory on either internal or the sd card. I had one on both at one point so maybe that happened to you. The C900 should be very quick but the C100 will slowly progress after 5% all the way around in several minutes.
When you get to updating back to 5.0, you can choose whichever region you want as long as it is a full OTA. C128 is USA and that's what I bought so that's what I picked. That gets you back in the right OTA update channel after that.

Hi guys,
I started as a novice and have learnt the hard way.
Has anyone tried rollback to EMUI 4.1 EU version on a US device (W09) and are there any problems I should be aware of?
I have had the exact same problem shared in this thread and have gone through the pain of finding a solution. My last resort is to rollback to 4.1 and restart the whole process.
@deV14nt: you suggested that when updating back to EMUI 5.0, I can choose the region even if my EMUI4.1 is EU version. How does this work?
Thanks in advance for your help.

Seems i have an issue

Ok so to start i got my bootloader code, did the Oem line in adb all went well, used the greatslon us M3 Twrp, said it went through ok, tried to boot using the volume up an down as well as power just boots to blackscreen then does nothing. if i let it just boot into factory android it runs for a min and then forces a reboot, oh and my model is the CPN-W09 which i think is the issue upon reading, the Greatslon twrp is for a dif version of M3 then mine, so i tried the erecovery it says im not supported, i tried restore through hisuite says not supported, i try and do a factory reset but unit powers off before it can complete. Any ideas what i can do?

I had that issue with my first M3, even though it's a BAH-W09. Since it was US version and I didn't catch there being a difference between it and the international/European BTV-W09, I screwed it up. I was never able to get back to full operation, but that was mostly out of irritation and the ease at which I could return it for a replacement.
That being said, there are full-update firmwares out there, you'll need to spend some time on Google/search engine of choice to find them. Once you have one, you'll need the firmware extractor to pull the update apart into the individual .img files, which can then be flashed using fastboot.
I'd start with https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146 - this is a firmware finder that should be able to find and download firmware updates for you (Windows only, I believe)
Then https://forum.xda-developers.com/showthread.php?t=2433454 - this should be able to pull the firmware apart for you. This was the part I got stuck on and initiated my return after, but I'm sure it works, I just wanted the easy way out

I wiped my Huawei P9 Lite's OS

Hi. I recently made the huge mistake of trying to update my rooted huawei p9 lite's system and it crashed. It got stuck in "your device is booting now" and since I figured out it crashed because of the update, a good way of restoring my device is to wipe the entire system (I kind of now know that it was a pretty huge mistake, at least with that I think I am right). All I know is that ist is a VNS-L21 since I found that on the back of the phone, but i don't know what follows after 21. I tried to add on an SD Card an update.zip, but since I don't really know what model it is, I fount on google VNS-L21C432B381 but there are many more models like this and I don't know which one is mine, it failed. Then, my laptop stopped copying .zip files correctly and I gave up on this method. Then, I tried to extract several update.app files in a dload folder on SD Card one-by-one, meaning one failed, tried to download another one, copied on SD, volume up+down+power button and so on, but I can't find a good file.
PLEEASE, I've been trying to repair this phone for the last 60 hours and I think I start to be a little bit irritable because I can't figure out a good method to repair this beautifully tangled situation.
Thank you in advance!