Related
Hi Guys
i have a question i want to flash my galaxy s7 edge with Odin i want to ask that there is some confusion between HOME-CSC and CSC simple
1-Can you please guide me which one i need to select to flash my phone?
2-What is Difference between the HOME-CSC and CSC?
3-What happened with both of them if i will flash with one of them ?
Guys ill wait for your reply ......hope so you will guide me in this matter
let's say you wanna update your phone without wiping the data u have on it. you use the home csc. If u have custom recovery and custom rom and you wanna go back to stock firmware you flash the csc file.
Sent from my SM-G935F using XDA-Developers mobile app
ecg803 said:
let's say you wanna update your phone without wiping the data u have on it. you use the home csc. If u have custom recovery and custom rom and you wanna go back to stock firmware you flash the csc file.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
I am already on the Stock and with the stock recovery if i will select the CSC simple what will happen is there any DAMAGE to my phone???
the csc file will just wiped the whole phone of your data just like day u bought it.
Sent from my SM-G935F using XDA-Developers mobile app
ecg803 said:
the csc file will just wiped the whole phone of your data just like day u bought it.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Then CSC simple is good i want wipe all of the data thanks a LOT...........one more question if you have a answer about that i saw error in recovery
E: CANT MOUNT / DATA (invalid aurgument)
is there any soln about this issue what you said about this error.....but this error did nothing to my phone my phone is working normally
your answer is required
that is normal.
Sent from my SM-G935F using XDA-Developers mobile app
There should be a guide on this...!
But what's the difference between CSC and HOME_CSC?
treysis said:
But what's the difference between CSC and HOME_CSC?
Click to expand...
Click to collapse
Didn't he already answer that question?
Home_CSC: Flash the firmware without wiping the data (if you just want to update the ROM)
CSC: Flash the firmware along with a complete wipe including data (mostly used in cases like bricked phones or Go-Back-To-Stock situations)
I always backup data and do a clean install with CSC ! Its recommended.
When I wanted to swap the firmware from (V) Verizon to (U) Unlocked, I had to use CSC simple, the Home_CSC gave an error. So I assumed the existing data cannot be "saved" when firmware are of different types.
I have asked about this and I wasn't that lucky to get an answer, so I just tried it (trial and error).
However, I think the data wipe is just a side-effect, not the purpose of CSC. Changing the CSC will always wipe data, including any custom software from the previous carrier:
https://productioncommunity.publicm...ung-Phone-Info/m-p/53208/highlight/true#M6228
In my case the original Home_CSC, had only VZW (Verizon) code available. The new unlocked firmware brought in 15 different CSC codes that can be applied when a SIM from one of those providers is introduced in the phone. Phone INFO shows those codes.
@NaJeEb303 He did answer, but he didn't make it clear. Only after knowing the answer I can understand what he meant. So thanks to you for clarifying.
adnanandhoney said:
Hi Guys
i have a question i want to flash my galaxy s7 edge with Odin i want to ask that there is some confusion between HOME-CSC and CSC simple
1-Can you please guide me which one i need to select to flash my phone?
2-What is Difference between the HOME-CSC and CSC?
3-What happened with both of them if i will flash with one of them ?
Guys ill wait for your reply ......hope so you will guide me in this matter
Click to expand...
Click to collapse
Brother when you are flashing firmware with same csc as your previous firmware then you can use Home_csc and if you are flashing different csc firmware then you have to use file which starts with csc. You will lose data when not using home_csc because it contains different partition information and flashing this will delete you previous partition resulting loss of data but a successful flashing if you are stuck with home_csc. Hope you got your answer.
where do i find the HOME_CSC file?
Hey all,
i just used Odin3-v3.13.1 to upgrade from:
G935FXXU2EREM - GALAXY S7 EDGE SM-G935F DBT GERMANY
to:
G935FXXU2ERG2 - GALAXY S7 EDGE SM-G935F DBT GERMANY
First i selected all AP, BL, CP and HOME_CSC and started flasching. At the very last step (think it was the csc part) it failed.
The Phone said i thould have to use SmartSwitch to get Recovery. So i just opened odin again and just selected AP, BL and CP no csc this time.
That worked. Phone booted, did a bit upgrading and optimizing and now iam on 01.July upgraded. All fine!
But now iam really confused about csc in general.. what is it doing? And is it safe to just leave any csc file empty in odin when doing an upgrade?
No idea? Maybe i should better start a new fred for that
how can i get home_csc for samsung note 3 n900? thanks
How to modify CSC to prevent wipe of my files?
Hello!
How to wipe android OS, but keep my files, like documents, pictures, audio and video in SAMSUNG SM-N9005 memory? 'Android system' package was disabled in 'packagedisabler pro', and now SM-N9005 sticks during booting with animated SAMSUNG logo. Flashing with HOME firmware does not recover because it does not enable 'Android system' package.
How to modify CSC to prevent wipe of my files?
or
How to modify HOME_CSC to wipe android OS but keep my files?
Thanks!
I was answered this on Reddit
I started a thread on Reddit about how to get OTA after stock ROM flash, and the guy said that if I used the CSC file in the CSC field in Odin, I should still get OTA, so I guess it just means you would get OTAs on it. I think it depends on other factors such as build number and others too though, so I would research first.
NaJeEb303 said:
Didn't he already answer that question?
Home_CSC: Flash the firmware without wiping the data (if you just want to update the ROM)
CSC: Flash the firmware along with a complete wipe including data (mostly used in cases like bricked phones or Go-Back-To-Stock situations)
I always backup data and do a clean install with CSC ! Its recommended.
Click to expand...
Click to collapse
my tab s4 is factory unlocked. I'm currently using a tmobile sim. will flashing either of these remove the unlock? looking to flash android pie
i have done everything as said and my process has fail for s7 galaxy. how do revert back or redo?
I flashed 5.11 AP on ap and CP
did I brick my phone bcuz on an old ip4 i bricked my modem firmware xd
@#Henkate
I had CP unchecked but STILL AT SAMSUNG LOOP
HELP J500F Romania
Flashing same version dont cause any problem but if you flash wrong version anything can happen. make a backup before flashing anything .
Hello
I'm trying to flash the official lollipop stock rom on my j500h
I'm downloaded this stock Galaxy-j5-SM-J500h-full-factory-ROM-5.1.1.zip on androidfilehost
I'm extrect the Rom 4 file
BL
AP
CP
CSC
AP CP AND CSC flashing parfect but BL is not flashing
Please GUYS help me how to flash the bootloader tar via Odin tool
My phone is fully dead
AAMIR_KH said:
Hello
I'm trying to flash the official lollipop stock rom on my j500h
I'm downloaded this stock Galaxy-j5-SM-J500h-full-factory-ROM-5.1.1.zip on androidfilehost
I'm extrect the Rom 4 file
BL
AP
CP
CSC
AP CP AND CSC flashing parfect but BL is not flashing
Please GUYS help me how to flash the bootloader tar via Odin tool
My phone is fully dead
Click to expand...
Click to collapse
What is the error?
JohnTryingToRoot said:
What is the error?
Click to expand...
Click to collapse
thanks for your reply
My phone is showing this ERROR on downloading... mode SW REV FAIL : [aboot]Fused 2 > binary 1
please tell me sir how to fix the problem
AAMIR_KH said:
Hello
I'm trying to flash the official lollipop stock rom on my j500h
I'm downloaded this stock Galaxy-j5-SM-J500h-full-factory-ROM-5.1.1.zip on androidfilehost
I'm extrect the Rom 4 file
BL
AP
CP
CSC
AP CP AND CSC flashing parfect but BL is not flashing
Please GUYS help me how to flash the bootloader tar via Odin tool
My phone is fully dead
Click to expand...
Click to collapse
Hi, so from what i understand you flash with Odin so i have Odin 3.12 you should take this one , put your phone into Download Mode and when you see your phone on odin ,click on AP and choose the xxxxxxxx.tar.md5 ,from what i know you need only AP , the rest are :
BL: your bootloader
CP: your modem
CSC: this is what features you get in some countries or carriers like Wi-Fi Calling.
Not a Pro , but that s what i can do for you
EDIT: And i don t think is a big of a problem i had some devices that were screwed by me and i gave them live again ) ,hope you make it buddy.
pantynpc said:
Hi, so from what i understand you flash with Odin so i have Odin 3.12 you should take this one , put your phone into Download Mode and when you see your phone on odin ,click on AP and choose the xxxxxxxx.tar.md5 ,from what i know you need only AP , the rest are :
BL: your bootloader
CP: your modem
CSC: this is what features you get in some countries or carriers like Wi-Fi Calling.
Not a Pro , but that s what i can do for you
EDIT: And i don t think is a big of a problem i had some devices that were screwed by me and i gave them live again ) ,hope you make it buddy.
Click to expand...
Click to collapse
As you said of the flash only AP xxxj500h.tar.m5d on I'm already tried but odin showing only one error fail Auth I'm downloaded latest firmware on sammobile website but all firmware showing same problems on my j500h
Downloading mode
SW REV FAIL : [aboot]Fused 2 > binary 1
please let me tell have any solutions to fix this problem
AAMIR_KH said:
As you said of the flash only AP xxxj500h.tar.m5d on I'm already tried but odin showing only one error fail Auth I'm downloaded latest firmware on sammobile website but all firmware showing same problems on my j500h
Downloading mode
SW REV FAIL : [aboot]Fused 2 > binary 1
please let me tell have any solutions to fix this problem
Click to expand...
Click to collapse
Make sure you just choose the CSC, PA and cache to flash thru odin dont try to flash the BL that is what will cause the revision check error.
Don't use from sammobile. Use one from the xda threads.
Maybe check ,idk if u will find something important... : https://forum.xda-developers.com/showthread.php?t=2785363
Hello,
Today I tried to flash KING OF NOUGAT v13 but my phone got stacked on Samsung Logo(+30min). I was forced to restart it(Power+Volume Up) and flash the recovery that made before flashing. To my surprise when the phone boot there was no connection(only Wi-FI). As far as I can see IMEI, Bluetooth and Mac address are unavailable. I tried different backup(I have two on SD card) but the problem was the same.
When I created the backup I made a full backup including EFC, but for some reason, it's not working.
I also tried this article , and put those commands in the terminal but no result.
I know there is an option to fix it if I flash the stock rom . But i would like to know if there is another options
there is sticky thread with info how to get imei back, so just read and follow
yaro666 said:
there is sticky thread with info how to get imei back, so just read and follow
Click to expand...
Click to collapse
Actually, the problem was the the Bl and Cp, After I flashed the latest everything workout
Can you please share the link to the latest BL and CP ...i am facing the same issue after flashing the leaked oreo update...and i cant flash older BL verrsions anymore,and i cant use any sim either....
download the newest rom and extract it yourself, easy as unpacking
yaro666 said:
download the newest rom and extract it yourself, easy as unpacking
Click to expand...
Click to collapse
I tried but it still shows this error
SW REV check fail device 2 binary 1
it flashed without any bl other ap cp and csc but gives error while flashing the BL file....did u flash the nougat BL file,or any other one ?
Sariful Alam Fahad said:
I tried but it still shows this error
SW REV check fail device 2 binary 1
it flashed without any bl other ap cp and csc but gives error while flashing the BL file....did u flash the nougat BL file,or any other one ?
Click to expand...
Click to collapse
same here i downloaded the latest version i could find and i cant flash the bootloader and flashing CP doesnt fix anything
I do have problems - Wifi and BT can't be enabled. So I want to reflash Stock Rom.
In the manual at sammobile.com is mentioned to flash 4 partitions, AP, BL, CP, CSC - but in the download zip file there is no CP file (Modem/Radio).
I assume a reflash of CP might useful to recover Wifi/BT. How to get this file? Anything else I can do?
In the stock firmware there should be 4 files. I have this tab and have flashed OS without any problem. While downloading the firmware pls, Check the region and build number.