Hi Guys
i have a question i want to flash my galaxy s7 edge with Odin i want to ask that there is some confusion between HOME-CSC and CSC simple
1-Can you please guide me which one i need to select to flash my phone?
2-What is Difference between the HOME-CSC and CSC?
3-What happened with both of them if i will flash with one of them ?
Guys ill wait for your reply ......hope so you will guide me in this matter
let's say you wanna update your phone without wiping the data u have on it. you use the home csc. If u have custom recovery and custom rom and you wanna go back to stock firmware you flash the csc file.
Sent from my SM-G935F using XDA-Developers mobile app
ecg803 said:
let's say you wanna update your phone without wiping the data u have on it. you use the home csc. If u have custom recovery and custom rom and you wanna go back to stock firmware you flash the csc file.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
I am already on the Stock and with the stock recovery if i will select the CSC simple what will happen is there any DAMAGE to my phone???
the csc file will just wiped the whole phone of your data just like day u bought it.
Sent from my SM-G935F using XDA-Developers mobile app
ecg803 said:
the csc file will just wiped the whole phone of your data just like day u bought it.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Then CSC simple is good i want wipe all of the data thanks a LOT...........one more question if you have a answer about that i saw error in recovery
E: CANT MOUNT / DATA (invalid aurgument)
is there any soln about this issue what you said about this error.....but this error did nothing to my phone my phone is working normally
your answer is required
that is normal.
Sent from my SM-G935F using XDA-Developers mobile app
There should be a guide on this...!
But what's the difference between CSC and HOME_CSC?
treysis said:
But what's the difference between CSC and HOME_CSC?
Click to expand...
Click to collapse
Didn't he already answer that question?
Home_CSC: Flash the firmware without wiping the data (if you just want to update the ROM)
CSC: Flash the firmware along with a complete wipe including data (mostly used in cases like bricked phones or Go-Back-To-Stock situations)
I always backup data and do a clean install with CSC ! Its recommended.
When I wanted to swap the firmware from (V) Verizon to (U) Unlocked, I had to use CSC simple, the Home_CSC gave an error. So I assumed the existing data cannot be "saved" when firmware are of different types.
I have asked about this and I wasn't that lucky to get an answer, so I just tried it (trial and error).
However, I think the data wipe is just a side-effect, not the purpose of CSC. Changing the CSC will always wipe data, including any custom software from the previous carrier:
https://productioncommunity.publicm...ung-Phone-Info/m-p/53208/highlight/true#M6228
In my case the original Home_CSC, had only VZW (Verizon) code available. The new unlocked firmware brought in 15 different CSC codes that can be applied when a SIM from one of those providers is introduced in the phone. Phone INFO shows those codes.
@NaJeEb303 He did answer, but he didn't make it clear. Only after knowing the answer I can understand what he meant. So thanks to you for clarifying.
adnanandhoney said:
Hi Guys
i have a question i want to flash my galaxy s7 edge with Odin i want to ask that there is some confusion between HOME-CSC and CSC simple
1-Can you please guide me which one i need to select to flash my phone?
2-What is Difference between the HOME-CSC and CSC?
3-What happened with both of them if i will flash with one of them ?
Guys ill wait for your reply ......hope so you will guide me in this matter
Click to expand...
Click to collapse
Brother when you are flashing firmware with same csc as your previous firmware then you can use Home_csc and if you are flashing different csc firmware then you have to use file which starts with csc. You will lose data when not using home_csc because it contains different partition information and flashing this will delete you previous partition resulting loss of data but a successful flashing if you are stuck with home_csc. Hope you got your answer.
where do i find the HOME_CSC file?
Hey all,
i just used Odin3-v3.13.1 to upgrade from:
G935FXXU2EREM - GALAXY S7 EDGE SM-G935F DBT GERMANY
to:
G935FXXU2ERG2 - GALAXY S7 EDGE SM-G935F DBT GERMANY
First i selected all AP, BL, CP and HOME_CSC and started flasching. At the very last step (think it was the csc part) it failed.
The Phone said i thould have to use SmartSwitch to get Recovery. So i just opened odin again and just selected AP, BL and CP no csc this time.
That worked. Phone booted, did a bit upgrading and optimizing and now iam on 01.July upgraded. All fine!
But now iam really confused about csc in general.. what is it doing? And is it safe to just leave any csc file empty in odin when doing an upgrade?
No idea? Maybe i should better start a new fred for that
how can i get home_csc for samsung note 3 n900? thanks
How to modify CSC to prevent wipe of my files?
Hello!
How to wipe android OS, but keep my files, like documents, pictures, audio and video in SAMSUNG SM-N9005 memory? 'Android system' package was disabled in 'packagedisabler pro', and now SM-N9005 sticks during booting with animated SAMSUNG logo. Flashing with HOME firmware does not recover because it does not enable 'Android system' package.
How to modify CSC to prevent wipe of my files?
or
How to modify HOME_CSC to wipe android OS but keep my files?
Thanks!
I was answered this on Reddit
I started a thread on Reddit about how to get OTA after stock ROM flash, and the guy said that if I used the CSC file in the CSC field in Odin, I should still get OTA, so I guess it just means you would get OTAs on it. I think it depends on other factors such as build number and others too though, so I would research first.
NaJeEb303 said:
Didn't he already answer that question?
Home_CSC: Flash the firmware without wiping the data (if you just want to update the ROM)
CSC: Flash the firmware along with a complete wipe including data (mostly used in cases like bricked phones or Go-Back-To-Stock situations)
I always backup data and do a clean install with CSC ! Its recommended.
Click to expand...
Click to collapse
my tab s4 is factory unlocked. I'm currently using a tmobile sim. will flashing either of these remove the unlock? looking to flash android pie
i have done everything as said and my process has fail for s7 galaxy. how do revert back or redo?
Related
Hi everyone,
this maybe a very noob question but how do you change the CSC on the S4?
I recently flashed an unbranded UK firmware onto my Australian S4, back with my old phone, I was able to change the CSC with *#272*IMEI# though that doesn't seem to work now. So any ideas? Any help would be greatly appreciated. I want to change the CSC to a UK CSC so I'll be able to receive updates OTA or through kies.
1.Download the appropriate firmware for your region from sammobile.
2.Extract Hidden.img and cache.img
3.Now compress these two files together into a .Tar file.
4.Flash this in PDA section of Odin
5.You now have correct CSC
Sent from my GT-I9305 using XDA Premium HD app
Is anyone having trouble changing their CSC?
I've flashed the pre-rooted UK Firmware, and used CSC Changer to set the CSC to BTU.
It automatically re-boots, but the CSC hasn't changed.
I boot into recovery and perform a F.Reset, and the CSC still doesn't change to BTU.
As far as I can tell, I'm following all instructions correctly from here.
http://forum.xda-developers.com/showthread.php?t=2250824
"If someone want to change CSC, please use this app: Samsung Galaxy S2/S3 CSC
After using this app you MUST reboot into RECOVERY for the changes to take place.
Don't worry if you see some errors in recovery, it's NORMAL as "hidden.img" is excluded..
WORKS perfectly! TESTED!! "
I don't know what I'm doing wrong, and I'm getting increasingly frustrated!
Obagleyfreer said:
1.Download the appropriate firmware for your region from sammobile.
2.Extract Hidden.img and cache.img
3.Now compress these two files together into a .Tar file.
4.Flash this in PDA section of Odin
5.You now have correct CSC
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
Tried that without success. Got a failure in Odin.
There's no hidden.img nor cache.img but hidden.img.ext4 and cache.img.ext4. Are these the correct files?
I downloaded latest btu UK firmware
Loaded with odin
Did a factory reset
Switched if and then went into recovery mode
Rebooted and btu was activated
I was not rooted
Sent from my GT-I9505 using xda premium
Lipito said:
Tried that without success. Got a failure in Odin.
There's no hidden.img nor cache.img but hidden.img.ext4 and cache.img.ext4. Are these the correct files?
Click to expand...
Click to collapse
they are just ext4 formats so u could mount it on linux or something else..
use mkuserimg.sh command to convert
I'm also interested in this. I also changed from Australian firmware to UK. Since changing I've noticed HD voice (wb amr) is off (check by typing *#0011# into dialer then menu key>back>menu key>key input >enter '1' then wait till menu appears >WB AMR Status.)
Prior to changing roms both WB AMR Setting and UTMS WB was On. Now they're both off. I did some searching and apparently its tied to the CSC.
so.....how do we change csc to s4? i have installed unbranded rom, wiped but csc remained the same. how de we change this?
I9505 stuck with wrong CSC
gangstar said:
so.....how do we change csc to s4? i have installed unbranded rom, wiped but csc remained the same. how de we change this?
Click to expand...
Click to collapse
I am also stuck after trying several suggestions of fixes..
The Sammobile firmware for NEE (Nordic) gives a CSC of BTU, i previously had H3G
Looks like we will have to wait till DEV's get time to build a work-around.
Doing web searches there are several dodgy sites that claim older changers work on the S4 & also giving instructions to install via the old way with the 3 files, instead of just the PDA.
Hikari0307 said:
Hi everyone,
this maybe a very noob question but how do you change the CSC on the S4?
I recently flashed an unbranded UK firmware onto my Australian S4, back with my old phone, I was able to change the CSC with *#272*IMEI# though that doesn't seem to work now. So any ideas? Any help would be greatly appreciated. I want to change the CSC to a UK CSC so I'll be able to receive updates OTA or through kies.
Click to expand...
Click to collapse
Try this to change CSC:
http://droidviews.com/2012/how-to-change-csc-in-samsung-galaxy-phones/
Very well written article, so thank you for the link. Sadly though, one of the methods worked for me. Any more ideas gratefully received though!
++
VogonP0et said:
Very well written article, so thank you for the link. Sadly though, one of the methods worked for me. Any more ideas gratefully received though!
Click to expand...
Click to collapse
i just reboted in stock android recovery (hold vol up + home button+ power),and it said "applied multi csc....and it changed the csc to the my curent firmware¨s csc
I am trying to set my csc to BTU. Im using csc changer app.
However everytime I run it, I dont get a screen allowing me to choose the csc as they show in guides.
I know the app works, since its changed my csc from EVR to DBT (since my rom is german based).
What am I doing wrong?
After playing around with several stock firmwares and Odin, I accidentally stumbled upon a method to change the CSC of my S4 I9505 without the need to root the device. I successfully changed from the original TGY (Hong Kong) to SIN (Singapore) and then to DBT (Germany). This is what I did (in summary)
Make sure you take a backup via Kies if you need personal files
Download the respective stock ROMS from sammobile.com or samsung-updates.com or see thread on Stock Roms on XDA
Extract zip to get tar.md5
Put device into download mode (Vol down+ Home + Power) and Flash using Odin (PDA option)
Wait till device reboots back into Android after completing the flash and recovery
Once device reboots, do a Factory Reset via Settings > Accounts
Once device reboots after Factory Reset/recovery, enter the google account info and restore settings and then turn off the device
Boot device back into download mode (Vol down+ Home + Power)
Re-flash the same downloaded firmware for a second time via Odin
Once the device reboots after the 2nd flash, your CSC should have changed to the CSC of the ROM you downloaded, and Kies also should show that CSC has changed and it should allow future updates via Kies or OTA
kaushalls said:
After playing around with several stock firmwares and Odin, I accidentally stumbled upon a method to change the CSC of my S4 I9505 without the need to root the device. I successfully changed from the original TGY (Hong Kong) to SIN (Singapore) and then to DBT (Germany). This is what I did (in summary)
Make sure you take a backup via Kies if you need personal files
Download the respective stock ROMS from sammobile.com or samsung-updates.com or see thread on Stock Roms on XDA
Extract zip to get tar.md5
Put device into download mode (Vol down+ Home + Power) and Flash using Odin (PDA option)
Wait till device reboots back into Android after completing the flash and recovery
Once device reboots, do a Factory Reset via Settings > Accounts
Once device reboots after Factory Reset/recovery, enter the google account info and restore settings and then turn off the device
Boot device back into download mode (Vol down+ Home + Power)
Re-flash the same downloaded firmware for a second time via Odin
Once the device reboots after the 2nd flash, your CSC should have changed to the CSC of the ROM you downloaded, and Kies also should show that CSC has changed and it should allow future updates via Kies or OTA
Click to expand...
Click to collapse
It's unnecessary to do steps 7-10. You may check your new CSC in recovery mode after restoring the device.
Drunk1105 said:
It's unnecessary to do steps 7-10.
Click to expand...
Click to collapse
I was thinking so too but that's exactly what helped me to change CSC on my i9295 (very common with i9505). After the first wipe I still had the old CSC (I checked in Kies though). After the full procedure I have proper CSC in Kies. Probably there is a easier way but this one works also.
gtp said:
I was thinking so too but that's exactly what helped me to change CSC on my i9295 (very common with i9505). After the first wipe I still had the old CSC (I checked in Kies though). After the full procedure I have proper CSC in Kies. Probably there is a easier way but this one works also.
Click to expand...
Click to collapse
You had to restart Kies, it would show the new CSC then.
Drunk1105 said:
You had to restart Kies, it would show the new CSC then.
Click to expand...
Click to collapse
Of course I restarted Kies. I think what I have not done is entering Recovery once the Odin flash is done. Entering Recovery gives the following: Applying Multi-CSC... Applied the CSC-code: XXX (my new CSC here). And I think here's where all the magic happens.
gtp said:
Of course I restarted Kies. I think what I have not done is entering Recovery once the Odin flash is done. Entering Recovery gives the following: Applying Multi-CSC... Applied the CSC-code: XXX (my new CSC here). And I think here's where all the magic happens.
Click to expand...
Click to collapse
At least for me, my device goes in to "Recover Booting" after each Odin flash as well as a factory reset. I actually tried a a manual recovery boot via Vol Up + Home + Power after the factory reset in step 6, but it did not change my CSC, hence doing all steps is what worked for me all the time. I once skipped the Google login part after the factory reset and it didn't work that time either and had to do another factory reset, google login and another re-flash.
I wish there is an easier way, the reason I have been experimenting with different firmwares is to see if I can get LTE working natively, since phone does not show the LTE option under Mobile Networks. We have 2 operators offering LTE here in Sri Lanka but Samsung only sells the I9500 officially here which does not have LTE, so got down my I9505 from HK. So far I have had to use Viaero 4G Toggle app from the play store to enable LTE, while it works, enabling LTE this way is a huge battery drainer!
but is there a way to extract CSC from a particular firmware and flash only this?
I used to do it on my S3 by using the hidden.img and the cache.img but if I try in Odin on the S4 it fails (
How to flash the firmware (5 files in archive) to your s7edge?
AP, CP & BL I understand, but the 2 CSC-files...?
CSC -> there's a PIT inside and will wipe your device
HOME_CSC -> the data should stay on your device
Today I tried to update with HOME_CSC, everything was OK, but at the end Odin 3.10.7 FROZE at "meta-data" (this folder is in the HOME_CSC file): nothing happened anymore and I had to pull the cable
Smart Switch didn't recognize my S7edge anymore for the "Emergency Firmware Repair"!
Luckely, Odin did recognize my device and could install the firmware with the "normal" CSC-file and afterwards my device was reset...
I hope someone has a solution on this, because I don't want to install everytime again and again...
+1
same happened to me. I have the same question...
cristy78 said:
+1
same happened to me. I have the same question...
Click to expand...
Click to collapse
How did you get your device working again?
henklbr said:
How did you get your device working again?
Click to expand...
Click to collapse
Well, the flash went just fine. No problems except the device reset at factory settings. As brand new one....
But of course I would like to know how to flash without resetting the device.
I had the same problem yesterday when used Home_CSC... flashed again with normal CSC and went back to normal with a formated user data
We really need a solution to that... What would happen if we skipped the CSC file when flashing thru ODIN?
Flashing with CSC and not home_CSC will also reset your CSC.
Eg: I was on VODAFONE Romania and flashed stock unbranded using CSC. The result was I lost my ROM (from Romania) CSC, and defaulted to XEO from the multi CSC.
In this situation you cannot go back to your original CSC even after flashing using Smart Switch.
Rooting is the only option then and that will trip Knox.
Sent from my SM-G935F using Tapatalk
anybody figured this out?
Just had the same problem flashing with HOME_CSC it got stuck in ODIN and had to pull the cable.
Had to turn off phone and boot again in download mode to flash again with a straight CSC.
insaned said:
Just had the same problem flashing with HOME_CSC it got stuck in ODIN and had to pull the cable.
Had to turn off phone and boot again in download mode to flash again with a straight CSC.
Click to expand...
Click to collapse
Have a look at this thread:
OFFICIAL STOCK Firmware-update (Odin) thread Samsung GALAXY S7Edge SM-G935F
henklbr said:
Have a look at this thread:
OFFICIAL STOCK Firmware-update (Odin) thread Samsung GALAXY S7Edge SM-G935F
Click to expand...
Click to collapse
Thanks for the heads up. good job
What is the benefit of flashing Home_CSC instead of just CSC?
BCSC said:
What is the benefit of flashing Home_CSC instead of just CSC?
Click to expand...
Click to collapse
+1 for that question...
If some can clear us out whats inside of both files and diffrences it would be great ...
V_B said:
+1 for that question...
If some can clear us out whats inside of both files and diffrences it would be great ...
Click to expand...
Click to collapse
CSC contains an instruction that allow Odin to wipe the DATA
Code:
--update_package=CACHE:recovery/sec_csc.zip
--carry_out=csc_factory
--wipe_data
HOME_CSC contains instruction only to allow wipe of cache BUT the original HOME_CSC can cause Odin to freeze at the end of the flashing process.
Code:
--update_package=CACHE:recovery/sec_csc.zip
--carry_out=csc_home
--wipe_cache
That's why you need to modify the HOME_CSC using the CYGWIN tool.
Just dont flash the home csc. I never did it. Everything work greats.
mercifool said:
Just dont flash the home csc. I never did it. Everything work greats.
Click to expand...
Click to collapse
HOME_CSC is supported on Odin version 3.11 or later. It's okay to flash it now.
Sorry to revive this thread but when a downgrade is done from Nougat back to Marshmallow a factory reset via recovery must be required if flashing HOME_CSC. Otherwise just use normal CSC on downgrade.
thank you
Samsung S6 Active G890A
Hello,
Where do I find a HOME_CSC file for Samsung S6 Active SM-G890A device?
Hi everyone. I am having battery drain issues after i installed the September security update. I want to reinstall the firmware on smart switch by connecting to PC.
The last time i tried it through emergency software recovery in fownload mode, I almost bricked my phone. Can i reinstall using device initialization option? Which one would be better?
Thanks in advance.
Chirag22ster said:
Hi everyone. I am having battery drain issues after i installed the September security update. I want to reinstall the firmware on smart switch by connecting to PC.
The last time i tried it through emergency software recovery in fownload mode, I almost bricked my phone. Can i reinstall using device initialization option? Which one would be better?
Thanks in advance.
Click to expand...
Click to collapse
Why not using odin instead?
Geoz said:
Why not using odin instead?
Click to expand...
Click to collapse
Thank you.
Tried it when i had bricked my phone. Want successful. Went through most of the tutoriala but didnt succeed. Would love to flash APC8 if I am able to use Odin.
Chirag22ster said:
Thank you.
Tried it when i had bricked my phone. Want successful. Went through most of the tutoriala but didnt succeed. Would love to flash APC8 if I am able to use Odin.
Click to expand...
Click to collapse
When you brick your device it has nothing to do with Odin (use the latest version)
Make sure you install the right firmware for your device
Import the appropriate files to Odin exactly where they supposed to be
You'll have five files when unpacked downloaded package
Installing CSC will wipe your device, to avoid that you have to install HOME_CSC instead
You may also need to set a password for a secure startup as it may ask
Geoz said:
When you brick your device it has nothing to do with Odin (use the latest version)
Make sure you install the right firmware for your device
Import the appropriate files to Odin exactly where they supposed to be
You'll have five files when unpacked downloaded package
Installing CSC will wipe your device, to avoid that you have to install HOME_CSC instead
You may also need to set a password for a secure startup as it may ask
Click to expand...
Click to collapse
Thanks again. My model no is 935 FD. APC8 is available for model 935F. Can i flash it for 935 FD model?
Chirag22ster said:
Thanks again. My model no is 935 FD. APC8 is available for model 935F. Can i flash it for 935 FD model?
Click to expand...
Click to collapse
Yes I think but I have the F model so I never tried that, Do so search on Google
Geoz said:
When you brick your device it has nothing to do with Odin (use the latest version)
Make sure you install the right firmware for your device
Import the appropriate files to Odin exactly where they supposed to be
You'll have five files when unpacked downloaded package
Installing CSC will wipe your device, to avoid that you have to install HOME_CSC instead
You may also need to set a password for a secure startup as it may ask
Click to expand...
Click to collapse
Hey again, @Geoz
I have two questions:
1. I can't get FOTA on my S7E, I think because the CSC file. Can I really flash the "HOME" one and not wipe data?
2. If I want to flash another Stock ROM, I must set secure startup? And if I forget, there is any solution?
LironImaN said:
Hey again, @Geoz
I have two questions:
1. I can't get FOTA on my S7E, I think because the CSC file. Can I really flash the "HOME" one and not wipe data?
2. If I want to flash another Stock ROM, I must set secure startup? And if I forget, there is any solution?
Click to expand...
Click to collapse
If you want to flash different stock firmware other than your region, flash the three (BL, AP, CP ) and use your original HOME_CSC (you are aware that you have to start all over), installing your region stock firmware with HOME_CSC will not wipe your device.
If you forget password use (default_password) without the brackets but it's important to set it before and use it only if you forget
Geoz said:
If you want to flash different stock firmware other than your region, flash the three (BL, AP, CP ) and use your original HOME_CSC (you are aware that you have to start all over), installing your region stock firmware with HOME_CSC will not wipe your device.
If you forget password use (default_password) without the brackets but it's important to set it before and use it only if you forget
Click to expand...
Click to collapse
But if I will flash other region FW and my own country CSC, I won't be able to get FOTA. As far as I know, The FW and the CSC has to match to get updates.
About password for secure startup, I mean, is it really necessary to set it before flashing new ROM? I must set it up?
LironImaN said:
But if I will flash other region FW and my own country CSC, I won't be able to get FOTA. As far as I know, The FW and the CSC has to match to get updates.
About password for secure startup, I mean, is it really necessary to set it before flashing new ROM? I must set it up?
Click to expand...
Click to collapse
You don't have to do anything just a heads up
S7 edge stuck on blue screen and download mode
It allows me to start a download In odin but fails everytime. Can I send my phone somewhere to have firmware reinstalled? I tried to get passed FRP lock cause I got ripped off and my computer died during a power outage so now the phone won't boot firmware or let me intall. I've tried 5 different ones. HELP:crying:
After all the hype I decided to try out the BTU nougat firmware, flashed the AP file via odin. Found out its buggy for me so I installed back stock 6.0.1 firmware for baltics, the same I had when I bought the phone. I also did wipe data. Now Galaxy Care says my device isnt compatible for it and Samsung Members app says my device isnt supported. What did I do wrong?
By the way before doing data wipe when my phone booted up after installing back to 6.0.1, it asked me for some.kind of password. I downloaded the firmware from sammobile.
Edit: maybe it was because I selected only the AP file in odin when i installed back the SEB firmware?
Sent from my SM-G935F using XDA-Developers Legacy app
archzz said:
After all the hype I decided to try out the BTU nougat firmware, flashed the AP file via odin. Found out its buggy for me so I installed back stock 6.0.1 firmware for baltics, the same I had when I bought the phone. I also did wipe data. Now Galaxy Care says my device isnt compatible for it and Samsung Members app says my device isnt supported. What did I do wrong?
By the way before doing data wipe when my phone booted up after installing back to 6.0.1, it asked me for some.kind of password. I downloaded the firmware from sammobile.
Edit: maybe it was because I selected only the AP file in odin when i installed back the SEB firmware?
Sent from my SM-G935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
You need to flash all files via Odin when doing this.
AP, BL, CP and CSC!
When reverting back and forth between completly different room you need a clean and install, and will loose personal media like settings, text pictures and so on, if not backed up.....
And after the FIRMWARE has booted, you turn OFF the phone and boot into the orginal recovery again. Flash the cache/dalvik and then factory reset, restart!
So yes
Like @LyLu said, you need to flash all 4 files, not just AP.
Also, if you are asked for a password and haven't set one, the default password is default_password
Unfortunately default_password is incorrect, does not accept it.
Which password is required?
Thanks.
I would like activate VOLTE on my carrier ORANGE FRANCE.
I have to update to the new firmware orange but i don't want to lose my data and i'm not rooted...
is it possible to only change home csc or csc for VOLTE without losing data??
Thank you..
ilan78 said:
I would like activate VOLTE on my carrier ORANGE FRANCE.
I have to update to the new firmware orange but i don't want to lose my data and i'm not rooted...
is it possible to only change home csc or csc for VOLTE without losing data??
Thank you..
Click to expand...
Click to collapse
Not 100% sure, but I have a unlocked S8 + and wanted VoLTE from my carrier, so i flashed the CSC file that belongs to the carrier that has VoLTE, and it worked fine It didn't wipe my data. but you have to make sure to flash the CSC file that doesnt have the pit file inside it (this will repartition your phone and delete the data).
for example the stock firmware for my carrier comes with 2 CSC files.
CSC_EVR_G955FEVR1AQD9_CL11146180_QB13177317_REV00_user_low_ship.tar -- This CSC file will repartition my phone
HOME_CSC_EVR_G955FEVR1AQD9_CL11146180_QB13177317_REV00_user_low_ship.tar -- this CSC doesnt include the pit file and will not wipe my data.
So in your case you will have to check the CSC files and flash the correct one. And if your phone gets stuck on the samsung logo screen try flashing the whole stock firmware with the CSC for VoLTE from your carrier.
(make sure to remove userdata.img from the AP.tar file in the stock image, as this will also wipe your data too from my experience use Z-zip to create/Edit a tar file that can be flashed via Odin)
remember this isnt 100%, but has worked for me in 3 different phones.
kossiewossie said:
Not 100% sure, but I have a unlocked S8 + and wanted VoLTE from my carrier, so i flashed the CSC file that belongs to the carrier that has VoLTE, and it worked fine It didn't wipe my data. but you have to make sure to flash the CSC file that doesnt have the pit file inside it (this will repartition your phone and delete the data).
for example the stock firmware for my carrier comes with 2 CSC files.
CSC_EVR_G955FEVR1AQD9_CL11146180_QB13177317_REV00_user_low_ship.tar -- This CSC file will repartition my phone
HOME_CSC_EVR_G955FEVR1AQD9_CL11146180_QB13177317_REV00_user_low_ship.tar -- this CSC doesnt include the pit file and will not wipe my data.
So in your case you will have to check the CSC files and flash the correct one. And if your phone gets stuck on the samsung logo screen try flashing the whole stock firmware with the CSC for VoLTE from your carrier. (make sure to remove userdata.img from the AP.tar file in the stock image, as this will also wipe your data too from my experience)
remember this isnt 100%, but has worked for me in 3 different phones.
Click to expand...
Click to collapse
Thank you very much... I'm scared to try and to lost all....
And do you think i have to choose the CSC of same firwmare's version? Because i Have the new update AQG5 and the CSC I want for VOLTE is AQF7. Thank You very much.
ilan78 said:
Thank you very much... I'm scared to try and to lost all....
And do you think i have to choose the CSC of same firwmare's version? Because i Have the new update AQG5 and the CSC I want for VOLTE is AQF7. Thank You very much.
Click to expand...
Click to collapse
yeh you can use CSC from older version like i am doing, should be fine. :good:
kossiewossie said:
yeh you can use CSC from older version like i am doing, should be fine. :good:
Click to expand...
Click to collapse
Just, after that you lost update with OTA?
ilan78 said:
Just, after that you lost update with OTA?
Click to expand...
Click to collapse
yes you lose OTA, but you can just download the stock image and repeat this process.