I have installed twrp on my redmi note 7 with ressurection remix and for some reason I cannot connect to any wifi without setting it to static first. When it is set to dhcp, i get the message 'sign in required'. I have flashed the newest firmware files from the XiaomiUpdater website. I dont know what else to do. This issue happens with any custom rom I have. Please help.
If it happens with any ROM, sounds like there is an issue with WiFi router configuration? Have you tried connecting anything else to that WiFi router to rule out it's not the cause?
Related
Installed the OTA update and re-applied unRevoked root. I can't maintain a wireless connection for long. I initially thought it was my router and rebooting the router actually does temporarily fix the problem but it happens again. How do I know it is not the router? My other wireless devices are working! I disable wifi on my phone and reconnect but still have no service. Rebooting the router is the only temporary fix. Gah.
I would say it may be the Rom over the OTA. That is of you're running a custom Rom or anything that's not stock. Are you running the latest radio? The .09.10,check to make sure. If your other devices are working without dropping then that eliminated the router for the equation. If you want to make sure then try connecting to any open WiFi connection to see if you have the same issue. If you do then u know for sure it's not your router.
I would try doing a nandroid first then wipe cache and davlik and flash your Rom again. Do not do a factory reset. Once you boot up just test the WiFi again b4 doing anything. If it works then just restore your apps if needed via Titanium backup.
If u have the same issue then at that point u can do a nandroid restore.
Multiple option,am confident one of them will work,good luck.
Sent from my PC36100 using Tapatalk
i had the same issue running fresh 3.3.0 .. and what i saw that my phone wasnt connecting at all but my laptop and my sisters top were all connecting. So i went into the wireless router ip address .. whatever yours may be. re-entered my password and WALA.. it started connecting to my phone again.. it was strange but thats what worked for me
So I dont exactly know what is going on. I go to connect to a wireless network and it will start to connect, say its obtaining IP adress, and then refresh and start all over again. It never actually connects and stays connected. I know its not the router because I have tried numerous networks (that worked before) and now they just stopped working. I did have trouble with root and I re unlocked the tablet because root wasn't working. Is there anyway I messed something up? I installed the 3.2.2 rooted rom and now I flashed back to moray both with the same non-working wifi result.
Anyone know what is going on?
smith3jk said:
So I dont exactly know what is going on. I go to connect to a wireless network and it will start to connect, say its obtaining IP adress, and then refresh and start all over again. It never actually connects and stays connected. I know its not the router because I have tried numerous networks (that worked before) and now they just stopped working. I did have trouble with root and I re unlocked the tablet because root wasn't working. Is there anyway I messed something up? I installed the 3.2.2 rooted rom and now I flashed back to moray both with the same non-working wifi result.
Anyone know what is going on?
Click to expand...
Click to collapse
Did you by chance restore system apps and data through Titanium Backup? Sometimes wifi is messed up by restoring a previous version of the system app and data over a newer version supplied by a custom Rom.
You might want to just wipe everything in recovery, reflash your Rom and set it all up again fresh.
my WIFI was messed up when I swiched Kernels way back. I had forgotten to push one of the files... when you switched ROMs, did you wipe first or did you just install one over the other?
have similar issue after going from hammerhead 3.2 to moray 2.2.2.
Infrastructures wifi works fine, but whe trying to connect the xoom to an ad-hoc (from Nokia jokiuspot) just keeps displaying "obtaining IP address". Never had a problem with hammerhead? Guessing it has something to do with the dchp client on the Xoom¿
Certainly not a big problem, and something I am more than happy to live with as is.
everything else working spot on. Using a UK wifi only!
Hello,
I just set up Swiftdroid v2.0 RC5 with my 540, however, I wanted to set up WiFi after that to download some apps. The problem is that I can't connect to my router, after entered the correct key it says 'Authentification', and some seconds later it aborts and says 'Deactivated', it simply doesn't connect, while other machines (i.e. my laptop, my sister's PC) are able to use our WiFi.
Help would be appreciated.
Regards.
thiaZ99 said:
Hello,
I just set up Swiftdroid v2.0 RC5 with my 540, however, I wanted to set up WiFi after that to download some apps. The problem is that I can't connect to my router, after entered the correct key it says 'Authentification', and some seconds later it aborts and says 'Deactivated', it simply doesn't connect, while other machines (i.e. my laptop, my sister's PC) are able to use our WiFi.
Help would be appreciated.
Regards.
Click to expand...
Click to collapse
Flash the ROM again I don't have problems with WiFi..
I actually flashed RC4 twice yesterday, I thought RC5 would solve that problem, so I installed it, sadly it didn't. I don't think that that problem is caused by a hardware error as WiFi worked with the raw 2.1.
thiaZ99 said:
I actually flashed RC4 twice yesterday, I thought RC5 would solve that problem, so I installed it, sadly it didn't. I don't think that that problem is caused by a hardware error as WiFi worked with the raw 2.1.
Click to expand...
Click to collapse
Are you sure that you entered the correct password? If you know it's correct, revise your router configuration and change the password of the wireless point to something different and try again. If all else fail, install Connectify on a Wifi compatible computer and tether your internet connection.
jhonnyx1000 said:
Are you sure that you entered the correct password? If you know it's correct, revise your router configuration and change the password of the wireless point to something different and try again. If all else fail, install Connectify on a Wifi compatible computer and tether your internet connection.
Click to expand...
Click to collapse
its either the wrong password or your system!!
i had a similar problem but just reflashed and problem solved!!
I hope someone can help me with this.
I have an ideos X5 and this happens with both aurora and miui roms (all ICS).
At home, I can connect perfectly to my WPA2 PSK network and use it.
At work, I can connect to the WPA2 PSK network, I get all dhcp settings, but can't connect to anything. I can't even get dns resolution for google.com.
The laptop and my ICS tablet both work perfectly on these networks.
Is there anything I can do to troubleshoot and solve this problem?
Both aurora and miui already worked in this network, but I can't reproduce it now, even with wipes and different versions installed.
Happns the same with since yesterday! I'm using the Elora ROM, and already reinstalled it over and over and still doenst work =( any help??
luiscarlosmatos said:
Happns the same with since yesterday! I'm using the Elora ROM, and already reinstalled it over and over and still doenst work =( any help??
Click to expand...
Click to collapse
Go to the latest Elora/Aurora zip/update that worked and extract wpa_supplicant from system/bin/
replace it with the one on your phone.
reboot
Hi,
Right now I'm having issues with my Moto G4 Play and wifi. The problems is kind of reproducible ... after some days.
ROMs tried:
RR-N-v5.8.3-20170707-harpia-Official.zip
lineage-14.1-20170711-nightly-harpia-signed.zip
Symptoms:
- Wifi Scan doesn't work any more ... just showing SSID from some hours before
- Even not possible to connect to wifi when entering the SSID and security settings manually
- Disabling / Enabling the wifi doesn't help
Solution:
- Right now ... only a reboot fixes the problem
Anybody here facing the same problem?
Regards stefan1384
Had the same issue here as well but I swapped routers a day back and it hasn't happened again so far. Using RR-N-v5.8.3-20170707-harpia-Official.zip.
Probable solutions:
1. Reset your network settings of the modem/router if possible.
2. Flash the modem file from the latest available stock ROM and then clean flash the custom ROM.
3. Give the necessary logs (modem logs and dmesg along with the logcat) when you re produce the issue.
rileysnotz said:
Had the same issue here as well but I swapped routers a day back and it hasn't happened again so far. Using RR-N-v5.8.3-20170707-harpia-Official.zip.
Click to expand...
Click to collapse
While not questioning the fix in your specific case the loss of WiFi scanning capability at the device level has absolutely nothing to do with the local AP (router).
Hello,
thanks for your feedback. With the Wifi APs it's a little bit complicated ... can't force the company where I'm working to replace their equipment ... I'm still not sure if it's caused by my home wifi or wifi at work.
I updated now to the latest lineage build: lineage-14.1-20170718-nightly-harpia-signed.zip maybe it's already solved there otherwise I'll maybe try to install a newer SomeFeak Kernel.
I'll post updates here.
Regards