I've got a Fusion Control USB Powered and Controlled Rotary Volume Knob.
It works on my Android board and Win7 PC but Joying doesn't seem to do anything with it. Doesn't control volume at all.
Anyone have experience with something like this?
I'm not new to Android but I am new to Android car stereos.
The terminal command lsusb shows the USB device and it gets an ID number.
So it's clearly showing up. Just not doing anything?
I've got a Joying Intel SC9853i.
All of the Android head units have a crippled Android version on them, some not so much, some quite a lot. The vendors add system apps onto it that interfere with the way Android ”typically" works.
Because I have such an Intel SC9853i myself, I can tell that this is one of the worst that I had so far in this respect.
I have the same Issue. It would be awesome to get it work as my unit has no physical buttons. the touch buttons are a joke.
t3vio said:
I have the same Issue. It would be awesome to get it work as my unit has no physical buttons. the touch buttons are a joke.
Click to expand...
Click to collapse
I have this on my Amazon wishlist.
Hard buttons that use wiring to the steering wheel controls on the Joying.
Instead of using Bluetooth.
https://www.amazon.com/gp/product/B0782TY4KC/ref=ox_sc_saved_title_1?smid=A11S1SD1BHTWFM&psc=1
Related
Hi,
So I am looking to buy a android headunit for my VW preferably in this style...
https://www.eonon.com/upload/product/Gallery/GA8153/GA8153-01.jpg
My current one I have got is a Joying 8inch which is similar to the one in the picture however the subwoofer had a seperate level control which was annoying because whenever you turn your speaker volume down, the sub woofer was still playing really loudly, you would then have to turn the subwoofer adjustment down as well so I had enough of it and gave it to my brother. I am now searching for another one however my BIG need is that I want the subwoofer and speakers to be controlled together using the volume knob.. I dont want to be driving and adjusting the volume knob as well as adjusting the subwoofer level on top of it. Its a silly design and all the new head units seem to have this!?
Any ways here is what I would like with the headunit:
WIFI
Bluetooth
Navigation
USB port
Browsing youtube
CD/DVD drive
Split screen/ Multitasking
Dashcam setup with DVR built into the head unit...
Here is the one I have seen https://www.eonon.com/Android-Car-G...a-Core-GPS-Navigation-System-Touchscreen.html
Have already pre ordered it but the stock wont be in till 8th january so I can still look around and find something else which might be better... Any recommendations guys? I love the fact this has a 8 core CPU but then it comes with the annoying subwoofer level adjustment which makes no sense to have. Would like a head unit without this sub woofer level adjustment feature.
Thank You.
so as the title says which is the best joying or other android head unit as far as modability and versatility.
right now i have rooted parrot asteroid smart that is adequate but kinda lacking in processing power so can lag if i have more than a few apps open with torque running in the background.
I'm interested in this thread. I have an Xtrons unit I've been using for the past 5 years now, so I'm due for an update.
I know one thing that's important to me in any head unit I get is that it have physical dials and/or buttons. Touchscreen controls require visual contact, which I'd like to keep to a minimum while driving. Volume control and << | >> song controls primarily. Screencasting would also be a huge plus. I'm just beginning to do my research, so any shortcuts or suggestions anyone can offer, I'd love to hear it.
I have a winca s190 from carnaviplayer
Styled to the same shape as my original OEM one
Literally has everything you just listed
this is for my forfour
http://www.carnaviplayer.com/smart-fortwoforfour-2007-2010-aftermarket-gps-navigation-p-958
I would also love to know the answer to this question
Hi All - I've had a Joying Sofia 3GR head unit since March 2017. I need to replace it. I currently have a 2008 Nissan 350Z without Bose or navigation, if this helps in the discussion. I like, but certainly do not love my Sofia unit, overall the experience has gotten far, far too frustrating not to replace this head unit. So here's what I do not like about the unit, and what I'd like to fix with new hardware.
1 - Right off the bat, the unit doesn't fit into any double-din dash kits I have found for this car. I've tried Metra and Scosche kits for the 350z, and the unit is a few mm too wide and too tall for it. Given the way the Z's center stack is designed, going with a unit where the display sticks out and is wider and taller than double-din likely won't work as I only have about 10mm of wiggle room before it touches the HVAC controls or prevents me from opening the center console compartment.
2 - I'm looking for a new unit with capacitive or no buttons. My Joying unit's NAVI button mechanism has failed, so it's stuck in. In addition, the volume encoder randomly adjusts the volume without me touching it. I'll be driving and all of a sudden the volume rises quickly and drastically, I can't have that obviously, it's too large of a distraction. Ideally, I'd like to get my factory steering wheel volume controls back. This has proven difficult as the standard aftermarket steering wheel control modules in the industry are frustrating and there's little documentation about it at all, and I don't believe my car has a CANbus or anything similar. I don't want to stick a BT remote on the wheel, that's silly.
3 - GPS randomly dies completely and bringing it back is luck of the draw. If I go into the Car Settings app or any GPS utility app, it cannot reach satellites. Ever. I've tried a reboot, I've tried manual A-GPS refreshes, I've tried making sure the date/time is correct, I've tried factory resetting it. Nothing, absolutely nothing fixes it with consistency, factory resets have gotten it back sometimes, but not always, and not currently. I guess this could be hardware, I just don't know. Navigation is a big part of why I decided to get one of these units in the first place.
4 - Poor performance. I'm trying to have to interact with the unit as little as possible. I'd like to be able to quickly set the music I want to hear, or the navigation destination of my choice, and have it work as reasonably well as say, my phone does. Currently, the Sofia unit hiccups, gets stuck, crashes, sound glitches, etc often. Usually at least once a day.
5 - Poor sound quality. It just doesn't sound as good as my factory CD player did. Not even close. I was able to get it sounding great with Viper4Android, but that takes up too much CPU headroom, so everything else will glitch, heat up, etc so it's not viable. Also since the 6.0 update, I can't use the EQ function in Viper, which is a large reason of why I was able to get it sounding good previously.
Does anyone have an Android unit that they love, and that actually works with consistency?
I wrote up a review here [Review] ATOTO A6 Install in Subaru WRX, but the bottom line is that i'm happy with ATOTO A6 Pro. I wont repeat the details here, but it addresses most of your needs and I was able to get the steering wheel controls working in my older car.
Hi all,
I posted this in the Joying forum but have had no success so figured I'd try my luck here too.
I just installed a Joying JY-VQ131N4GN Android 10 unit with newest firmware shipped into my '14 VW Passat with Fender Audio. Here are some of the issues I am running into and hope other people that may have experienced/solved these problems can help. I purchased the Can bus option for my vehicle and it was supposed to be plug and play.
1. Rear speaker output is very low for all output types (radio, android auto, BT audio, etc.). When fader setting is moved all the way to the rear, I get no sound at all from the rears. I don't know if this is due to the headunit or the Fender DSP located in the car's amp. I messed with the volume balance in the factory menu but I didnt notice any difference. I ordered a 12v bench tester and will test the speaker outs directly from the headunit soon.
2. The Joying supplied BT Music app/shortcut sends you to the BT phone app when used in a launcher. Sometimes it does this even when using the native launcher/UI.
3. I am unable to set custom steering wheel control buttons within the unit. It says to "hold down button to learn" or something like that but when I hit (and hold) any button it just does what the original button normally does (I am trying to change the phone button on the steering wheel to play/pause).
4. Hand brake sensor is backwards, when the handbrake is off, the headunit says it is activated and vice versa.
5. The unit won't switch from Celsius to Fahrenheit even after changing it in the setting menu. However, car launcher pro does allow switching to Fahrenheit but the top of the screen still reads Celsius regardless.
Chief Underverse said:
Hi all,
I posted this in the Joying forum but have had no success so figured I'd try my luck here too.
I just installed a Joying JY-VQ131N4GN Android 10 unit with newest firmware shipped into my '14 VW Passat with Fender Audio. Here are some of the issues I am running into and hope other people that may have experienced/solved these problems can help. I purchased the Can bus option for my vehicle and it was supposed to be plug and play.
1. Rear speaker output is very low for all output types (radio, android auto, BT audio, etc.). When fader setting is moved all the way to the rear, I get no sound at all from the rears. I don't know if this is due to the headunit or the Fender DSP located in the car's amp. I messed with the volume balance in the factory menu but I didnt notice any difference. I ordered a 12v bench tester and will test the speaker outs directly from the headunit soon.
2. The Joying supplied BT Music app/shortcut sends you to the BT phone app when used in a launcher. Sometimes it does this even when using the native launcher/UI.
3. I am unable to set custom steering wheel control buttons within the unit. It says to "hold down button to learn" or something like that but when I hit (and hold) any button it just does what the original button normally does (I am trying to change the phone button on the steering wheel to play/pause).
4. Hand brake sensor is backwards, when the handbrake is off, the headunit says it is activated and vice versa.
5. The unit won't switch from Celsius to Fahrenheit even after changing it in the setting menu. However, car launcher pro does allow switching to Fahrenheit but the top of the screen still reads Celsius regardless.
Click to expand...
Click to collapse
Looking to get this exact head unit. Did you ever overcome these issues?
Hello there all, I recently installed an android head unit from AliExpress, and everything went well until I first noticed that non of the buttons on the wheel worked. I saw many posts about this, but I didn't mind as I really didn't use it much. However, I got a professional to install the reversing camera that came with the head unit and try fixing the steering wheel's buttons. Because the professional attempted to fix the buttons for the steering wheel, he caused non of the buttons below the head unit to work (e.g. radio, the numbers, and turning the circle to try and change the volume). The "professional" was only able to get 2 of the buttons on the steering wheel to work (volume up and down, but you have to hold it down for like 5 seconds before it works), and when I tried to get back to him, they didn't respond. Also some reason, the volume will randomly mute every now and then (e.g. listening to music and the volume goes to 0).
I have seen many other threads about checking fuses and removing the battery for 10 minutes; however, I was wondering if there may be other fixes you guys may have that may help before attempting the battery method.
I would also like to say that I'm not overly confident working with or in cars. However, if there is a video or a simple explanation on how to do the fix, that would help make me feel confident.
Car: 2010 Ford Fiesta LX , 4sp auto 1.4L 4cyl Petrol.
Android head unit (model T10 6G 09 to 11): https://www.aliexpress.com/item/400...0.0.784e38daJ9X36b&mp=1&gatewayAdapt=Pc2Msite
edit: I have checked both 15amp and the 7.5amp and they were both fine.
reaL3ty said:
Hello there all, I recently installed an android head unit from AliExpress, and everything went well until I first noticed that non of the buttons on the wheel worked. I saw many posts about this, but I didn't mind as I really didn't use it much. However, I got a professional to install the reversing camera that came with the head unit and try fixing the steering wheel's buttons. Because the professional attempted to fix the buttons for the steering wheel, he caused non of the buttons below the head unit to work (e.g. radio, the numbers, and turning the circle to try and change the volume). The "professional" was only able to get 2 of the buttons on the steering wheel to work (volume up and down, but you have to hold it down for like 5 seconds before it works), and when I tried to get back to him, they didn't respond. Also some reason, the volume will randomly mute every now and then (e.g. listening to music and the volume goes to 0).
I have seen many other threads about checking fuses and removing the battery for 10 minutes; however, I was wondering if there may be other fixes you guys may have that may help before attempting the battery method.
Car: 2010 Ford Fiesta LX , 4sp auto 1.4L 4cyl Petrol.
Android head unit (model T10 6G 09 to 11): https://www.aliexpress.com/item/400...0.0.784e38daJ9X36b&mp=1&gatewayAdapt=Pc2Msite
Click to expand...
Click to collapse
Have you set the right car in the CAN-settings menu?
Clarify if your steering wheel buttons are provided via CAN or resistor related. (Car dealer)
rigattoni said:
Have you set the right car in the CAN-settings menu?
Clarify if your steering wheel buttons are provided via CAN or resistor related. (Car dealer)
Click to expand...
Click to collapse
I have set the CAN-settings to what the seller provided from AliExpress.
However, I think the steering wheel buttons are functional by resistors/resistance. (e.,g. wiring of KEY1, KEY2 and KEY GND).
I have a feeling that the "professional" may have done something to the wiring or such just to get the steering wheel buttons to work but in the process, he has made the radio control panel buttons not work anymore.
My main focus is just to fix the radio control panels (the picture below) as I use those way more than any other buttons on the steering wheel.
reaL3ty said:
I have set the CAN-settings to what the seller provided from AliExpress.
However, I think the steering wheel buttons are functional by resistors/resistance. (e.,g. wiring of KEY1, KEY2 and KEY GND).
I have a feeling that the "professional" may have done something to the wiring or such just to get the steering wheel buttons to work but in the process, he has made the radio control panel buttons not work anymore.
My main focus is just to fix the radio control panels (the picture below) as I use those way more than any other buttons on the steering wheel.
Click to expand...
Click to collapse
The radio control panel is provided by the CAN.
As no one knows what they did to the wiring, any help with it is no possible. You need to talk with the "professional" to get this fixed.
In your case about the SW buttson are connected to the resistor cales, you just need to search for the related app to set them. This is no automatism. May be you need to search for the SW in the settings. As I don´t know your system, I am not able to provide more help here.
Edit: You may test some other CAN-settings, may be they changed something and this leads to the issue with the radio buttons.
rigattoni said:
The radio control panel is provided by the CAN.
As no one knows what they did to the wiring, any help with it is no possible. You need to talk with the "professional" to get this fixed.
In your case about the SW buttson are connected to the resistor cales, you just need to search for the related app to set them. This is no automatism. May be you need to search for the SW in the settings. As I don´t know your system, I am not able to provide more help here.
Edit: You may test some other CAN-settings, may be they changed something and this leads to the issue with the radio buttons.
Click to expand...
Click to collapse
I get that, I don't really care about the SW buttons. I'm mainly just more focused on trying to figure out the radio control panel. I'm confused because the radio control panel stopped working as I had the "professional" help. Also, it's hard to talk with them again as they gave just left me on read for about 2 weeks now (from Airtasker).
I'll have another look tomorrow deeper into the CAN-settings, and will message the AliExpress seller for some help as I remember they said a problem like this might occur without the correct CAN-settings as you mentioned as well.
reaL3ty said:
I get that, I don't really care about the SW buttons. I'm mainly just more focused on trying to figure out the radio control panel. I'm confused because the radio control panel stopped working as I had the "professional" help. Also, it's hard to talk with them again as they gave just left me on read for about 2 weeks now (from Airtasker).
I'll have another look tomorrow deeper into the CAN-settings, and will message the AliExpress seller for some help as I remember they said a problem like this might occur without the correct CAN-settings as you mentioned as well.
Click to expand...
Click to collapse
Did you manage to get this sorted?