Related
Hi,
I already read multiple threads which are somehow related to this issue, but I still don't really understand it:
What is hm2014811 and what is wt88047? Where is the difference? Really different devices? Or somehow Android 4 and 5? It would be great if someone could explain all the details (or direct me to some page/thread where it is explained). Is it important which TWRP version to use?
Here someone asks I have a HM2014811 does exist a way to install a WT88047 rom?
But I got a used Redmi 2 2014811 with 1 GB RAM, too, and can only install wt88047 roms, as it seems. Previously I had some MIUI 8.3 and it was too slow. Currently I'm trying Lineage OS 14.1. Could it be that all of them are designed for 2 GB RAM?
I have TWRP 3.0.2 from here.
I'd like to go back to Android 4, to see if the device gets faster. However, it tells me that the ROMs are for hm2014811 and I have a wt88047!
Since some threads seem to tell me that installing a different TWRP would change the device type, I tried to install this older TWRP 2.8.7.2. However, it doesn't boot. It stays at the "MI" in the center, and while that's still shown, I can access fastboot and install the above 3.0.2 again, which works.
Any explanations, suggestions? What clean and fast Rom should I install on my 1 GB device, and how?
Thanks a lot,
Alex
[SOLUTION] - for error hm2014811
Hello,
Here is how it works:
Use this TWRP image: twrp-3.3.1-0-wt88047.img
Flash the recovery image like so:
1. fastboot devices
2. fastboot flash recovery twrp-3.3.1-0-wt88047.img
3. fastboot boot twrp-3.3.1-0-wt88047.img
4. Wait as the phone reboots into the newly flashed TWRP recovery
5. in TWRP recovery on the phone go to Advanced -> ADB sideload and enable it
on the PC run:
adb sideload lineage-15.1-20200119-nightly-wt88047-signed.zip
Good luck!
Alex1a said:
Hi,
I already read multiple threads which are somehow related to this issue, but I still don't really understand it:
What is hm2014811 and what is wt88047? Where is the difference? Really different devices? Or somehow Android 4 and 5? It would be great if someone could explain all the details (or direct me to some page/thread where it is explained). Is it important which TWRP version to use?
Here someone asks I have a HM2014811 does exist a way to install a WT88047 rom?
But I got a used Redmi 2 2014811 with 1 GB RAM, too, and can only install wt88047 roms, as it seems. Previously I had some MIUI 8.3 and it was too slow. Currently I'm trying Lineage OS 14.1. Could it be that all of them are designed for 2 GB RAM?
I have TWRP 3.0.2 from here.
I'd like to go back to Android 4, to see if the device gets faster. However, it tells me that the ROMs are for hm2014811 and I have a wt88047!
Since some threads seem to tell me that installing a different TWRP would change the device type, I tried to install this older TWRP 2.8.7.2. However, it doesn't boot. It stays at the "MI" in the center, and while that's still shown, I can access fastboot and install the above 3.0.2 again, which works.
Any explanations, suggestions? What clean and fast Rom should I install on my 1 GB device, and how?
Thanks a lot,
Alex
Click to expand...
Click to collapse
Here's the answer for "What is hm2014811 and what is wt88047? Where is the difference? Really different devices? Or somehow Android 4 and 5?"
HM2014811 is the model of the 2014811 Xiaomi Redmi 2 variant. wt88047 is the codename of Redmi 2.
twrp Porter-
as we know there is no tool available to port twrp for mt67XX. Phone so here i create a Simple and user friendly tool to Manually Port twrp for the Mediatek MT67XX Phone also Work with MT65XX new 32 bit phone .
The tool is Not based on Source This is a manually Porting Method where we use Stock Recovery to Port a custom Recovery. i have Port twrp for almost all latest MT67XX Chip from source and you can use as a Port Recovery,[Link below]..
What you need
1. tool Download Here https://androidfilehost.com/?fid=962021903579481564
2. Stock recovery [dump using SP tool or using Miracle box] Rename it 'stock.img'
3. Ported twrp from same chip [ Here is My collection- https://www.androidfilehost.com/?w=files&flid=220042] select according your chip if not work try from other phone. rename it 'port.img'
Note- i have Not enable auto copy to keep work with all chip Manually copy Paste Require.
Instructions-
Place port.img and stock.img in tool folder
Run twrp Kitchen.exe and follow on screen instructions
Donation-
You can Donate Me http://paypal.me/droiddeveloper
Faq-
1. Touch Not Work-
it's due to kernel source try to port from other twrp,
final solution use OTG or compile from source.
2. unable to mount partition's-
check and fix fastab in ramdisk folder before hiting enter.
3,. is this Work on old MT65XX Phone-
yes you can use it for MT65XX phone.
4. is This Method work 100% on all Phone-
No it can't work 100% on all phone but work on up to 90% of Mediatek Phone.
5. is this Support Nougat and oreo Images-
yes this one Support oreo and Nougat Recovery Images.
XDA:DevDB Information
twrp porter , Tool/Utility for all devices (see above for details)
Contributors
XN Logos
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2017-09-30
Created 2017-10-01
Last Updated 2018-01-06
@XN Logos
Thanks for the tool.
I cannot download the recovery
MT6757 6.0 MM.rar
MT6757 Nougat helio P25 6GB RAM.zip
MT6797 Helio X27 6.0MM.rar
you can download from androidfilhost.
here is twrp for ulefone t1 ported using this tool base umi plus e. Helio p25, this tool not work on umidigi crystal 4GB/64GB i have tried but not success. https://androidfilehost.com/?fid=673368273298987398
Thank u for your great job, i think the recovery we obtain is called "image-new.img" (and not "recovery-new.img" as it's mentioned in the screen instruction). I successfully get this recovery but don't know how to flash it ( because my phone is locked and not rooted "LENOVO C2- k10a40-" ( MT6735 ). HELP PLZ and thanks again .
walid77dz said:
Thank u for your great job, i think the recovery we obtain is called "image-new.img" (and not "recovery-new.img" as it's mentioned in the screen instruction). I successfully get this recovery but don't know how to flash it ( because my phone is locked and not rooted "LENOVO C2- k10a40-" ( MT6735 ). HELP PLZ and thanks again .
Click to expand...
Click to collapse
You can flash it using SP flash tools, take scatter file from your ROM and then flash with SP tools...
Here is Fastboot Guide, but you can face adbd and large image error with fastboot.
Code:
fastboot oem unlock
fastboot flash recovery recovery-new.img
Please, help me to find usb vcom drivers for my device : LENOVO C2, k10a40, MT6735. Thank u again
walid77dz said:
Please, help me to find usb vcom drivers for my device : LENOVO C2, k10a40, MT6735. Thank u again
Click to expand...
Click to collapse
I beleive that any question not related to TWRP porter is OT here. Check driver v. 5.1632.
mod edit - needrom links removed not allowed due to registration required in order to download
Here is all Flash tools and drivers-
https://androidfilehost.com/?w=files&flid=216849
XN Logos said:
Here is all Flash tools and drivers-
https://androidfilehost.com/?w=files&flid=216849
Click to expand...
Click to collapse
You can get all news about Mediatek driver and tools (like Flashtool) here:
http://www.androidiani.com/forum/mo...l-flash-di-telefoni-con-chipset-mediatek.html
The latest driver (ADB + Preloader) is 5.1632 (the link that I posted), and is good fro XP up to Windows 10 and didn't rqeuire to disable driver sign.
The latest version for Flashtool (for Windows and Linux) is 5.1728
In the link that I posted are available Gogle Platform Tools (adb.exe/fastboot.exe) usefull for flash boot or recovery without using Flashtool.
base added for Helio X23 [Rename rk.bak to recovery.img]
https://androidfilehost.com/?fid=745849072291678959
Hi
great tool for mtk user y have à mt6797M ( elephone s7 4G )
if I understand correctly I need the recovery stock (I have) and a port recovery ( don't have ) but there are none in the link you give., I tried with MT6797 + helio + x25 + 6.0 but I have a MT6797M with android 7, I'm not sure try to flash .
is it possible for you to make a port of the MT6797M Helio X20 M ?
And my fil name: image-new.img not recovery-new.img it's normal ?
Thinking i got same request as Bradco but MT6753M chip Cubot Cheetah 2
I was not able to find the "1st kernel file", guessing it is xx.img-zImage file.
Here my device nougat stock recovery (or at page 4 device review)
With my device at the moment TWRP seems to work only on Marshmallow. It would be nice if someone like to share an updated recovery
BTW
It took me a few retries to check extracting recoveries requiers 3 or 4 times press enter instead of just a singel press any key
@toBsucht Psp @Bradco we have twrp for both Phone 1. Elephone S7 and 2.cubot cheetah 2 no need to Port again. search Forum..
XN Logos said:
@toBsucht Psp @Bradco we have twrp for both Phone 1. Elephone S7 and 2.cubot cheetah 2 no need to Port again. search Forum..
Click to expand...
Click to collapse
yes there is this twrp: TWRP 3.0.3 by Jemmini (I have it) available on needrom and xda
it works with android 6 without problem but not with android 7.
This TWRP 3.0.3 by Jemmini is based on rom: S7_4g_20170110092009_v1.9.zip which is a rom android 6: https://bbs.elephone.hk/thread-12895-1-1.html#.WdiBplu0OM
My rom got this one: s7_4g_20170814163417_v2.4.zip which android 7 v2.4
I tried this :
1. clean install the rom: s7_4g_20170814163417_v2.4.zip
2. start the phone
3. flash the twrp : TWRP_303_Elephone_S7_4g_v1.9
4. reboot the phone but it is blocking on the logo ( I access the recovery but can not start the phone )
5. y tried 2/3 times but once the recovery install it remains on the logo.
after searching I found only this recovery TWRP_303_Elephone_S7_4g_v1.9
I do not know if there is an update because all DROPbox links are down.
@Bradco
Please read carefully the object of this thread. It's only about TWRP porter.
Is not a thread of support for mod recovery about specific devices.
For this please post in the specific thread for the device. Thanks.
@XN Logos
I propose to add this as first object of firs post
- Scope of this thread
Scope of this thread is only to discuss about TWRP porter application.
Please don't discuss about support for recovery for specific devices.
For this please post in the specific thread for the devices.
bovirus said:
@Bradco
Please read carefully the object of this thread. It's only about TWRP porter.
Is not a thread of support for mod recovery about specific devices.
For this please post in the specific thread for the device. Thanks.
@XN Logos
I propose to add this as first object of firs post
- Scope of this thread
Scope of this thread is only to discuss about TWRP porter application.
Please don't discuss about support for recovery for specific devices.
For this please post in the specific thread for the devices.
Click to expand...
Click to collapse
yes sorry,
I explain just my situation, the subject of my post is well on the port of TWRP for processor MT6797M and not on elephone s7. I must speak well of the phone to explain the problem correctly.
Ps : y test this tuto : https://forum.xda-developers.com/showthread.php?p=32965365#post32965365
but y don't find the file BoardConfig.mk
Pretty much same here!
i took a look to default.prop it use a string:
ro.build.version.sdk=24 (stock v14 recovery)
ro.build.version.sdk=23 ( twrp recovery)
even more that needs to be updated in default.prop file from old TWRP to enable it on API24 i.g.
ro.build.fingerprint (seems to be a littel more work)
i stopped repacking TWRP since i note bad image maybe brick my phone.
Also someone told me marshmallow uses ID_creation code = MOB30J; Nougat uses ID_creation code = NHG47N .... idk
funny i removed a additioinal password request. Another user now got additional :highfive: and idk how it occur
Yes Guys, This thread is only for tool Not for Specific Device. So you can ask only for Port base [MT67XX] not for twrp. if you need twrp You can contact Me or create yourself using tool.
XN Logos said:
Yes Guys, This thread is only for tool Not for Specific Device. So you can ask only for Port base [MT67XX] not for twrp. if you need twrp You can contact Me or create yourself using tool.
Click to expand...
Click to collapse
ok I understand, I want to try to do it myself, can you make a port of MTK 6797M ?
( this is what I needed at the start, I came on this thread to do the twrp myself.
thank you in advance
As already written it is not that easy to use if some errors occur. Also i did not 100% on it which files i have to remove if tool say "delete following":
1. kernel (is it x.img-zImage?)
2. kernel offset (i guess i found)
and that flase "press ANY key" message! Just as a little sidenote for your update.
i had to find out if it will work followed this guide (https://www.xda-developers.com/flash-generic-system-image-project-treble-device) and it booted will try other project treble roms and report back here also eveything worked i didnt have a apk crash or force close the little time i used it also the camera apk worked great not as good as stock but not as bad as rros:laugh::laugh::laugh::laugh:
You flashed RR ph Treble or Lineage 15.1. How's the battery ? SOT? Does it support VOLTE?
Please Report
Honor 7x project treble
I flashed the Resurrection Remix phh-Treble and the LineageOS 15.1 phh-Treble will try the third and report back so far the battery life is normal haven't notice any abnormal drain and I can't confirm about the volte
dcraffam said:
i had to find out if it will work followed this guide (https://www.xda-developers.com/flash-generic-system-image-project-treble-device) and it booted will try other project treble roms and report back here also eveything worked i didnt have a apk crash or force close the little time i used it also the camera apk worked great not as good as stock but not as bad as rros:laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
Hi Dude, After seeing your message, I tried this on the Honor 7X BND AL10 with EMUI 8 (Manually updated) with the Lineage OS (ARM 64 A-ONLY DEVICE) using the fastboot method. I wiped everything including system and I tried with both stock recovery installed and Twrp recovery installed and I also tried wiping using fastboot "fastboot -w" command. After that I installed using the fastboot and it went well and shows as finished but when I tried to boot, it just doesn't boot at all. I don't even see the lineage OS boot logo or something and eventually it goes to Huawei E recovery.
Could you please tell me which version exactly you flashed like aosp or RR or Lineage and Arm 64 A-only device or AB-device etc... A lot of people would really appreciate that.
Thetpcguy said:
Hi Dude, After seeing your message, I tried this on the Honor 7X BND AL10 with EMUI 8 (Manually updated) with the Lineage OS (ARM 64 A-ONLY DEVICE) using the fastboot method. I wiped everything including system and I tried with both stock recovery installed and Twrp recovery installed and I also tried wiping using fastboot "fastboot -w" command. After that I installed using the fastboot and it went well and shows as finished but when I tried to boot, it just doesn't boot at all. I don't even see the lineage OS boot logo or something and eventually it goes to Huawei E recovery.
Could you please tell me which version exactly you flashed like aosp or RR or Lineage and Arm 64 A-only device or AB-device etc... A lot of people would really appreciate that.
Click to expand...
Click to collapse
im going to write a quick lil guide on how im doing this for you right now
.................................................HOW TO FLASH GSI ON HONOR 7X ................................
DO SO AT OWN RISK I HOLD NO LIABLILTY
LETS BEGIN
1 you must be on stock emui 8 you must not have a pin set or device encrypted or frp lock and boot loader must be unlocked
2 download one of the 3 images listed here ( https://www.xda-developers.com/flash-generic-system-image-project-treble-device/ )
( i personally only tried the ( LineageOS 15.1 phh-Treble Thread) and the (Resurrection Remix phh-Treble Thread) ((((((download the a only arm64image))))))))
3 download the 8.1 pico gaapps package for arm64 found here ( http://opengapps.org/ )
4 now you must download this twrp i know it works from the honor 7x oreo twrp ill upload it or you can download it from the thread
5 flash the twrp twrp_ramdisk_oreo_7-4-18.img linked in fastboot then reboot recovery (note) there will be two recoverys i upload one needed to flash the (gsi) and the other twrpimgmount_ramdisk.img is used to flash (((twrp backup)) to go back to stock oreo as the first one wont boot once the (gsi) is flashed only the mount twrp.img will the( twrp_ramdisk_oreo_7-4-18.img) will boot with the stock emui beta for some reason
6 create full backup with the twrp_ramdisk_oreo_7-4-18.img flashed in step 5 (personally i backed up everything i could )
7 factory reset data using twrp
8 flash the (gsi) image u downloaded in step 2 to system image .......... tap install change the type from zip to image select the (gsi) and flash to system image partion
9 flash pico gapps 8.1 arm 64 ( the rest are to big o flash ))
reboot device tada you booted a stock (gsi)
i couldnt upload recoveries but they can be found here https://forum.xda-developers.com/devdb/project/?id=25826#downloads
to go back to stock emui fastboot recovery flash the twrpimgmount.img factory reset and restore backup some partions will fail like bdm image,, data,, the partions that do uncheck those and restore backup agin flash stock recovery (RECOVERY_RAMDIS.img) and factory reset and you will be on emui8 agin
let me know if you have any problems im going t ry the phh treble aosp (gsi) now
Thetpcguy said:
Hi Dude, After seeing your message, I tried this on the Honor 7X BND AL10 with EMUI 8 (Manually updated) with the Lineage OS (ARM 64 A-ONLY DEVICE) using the fastboot method. I wiped everything including system and I tried with both stock recovery installed and Twrp recovery installed and I also tried wiping using fastboot "fastboot -w" command. After that I installed using the fastboot and it went well and shows as finished but when I tried to boot, it just doesn't boot at all. I don't even see the lineage OS boot logo or something and eventually it goes to Huawei E recovery.
Could you please tell me which version exactly you flashed like aosp or RR or Lineage and Arm 64 A-only device or AB-device etc... A lot of people would really appreciate that.
Click to expand...
Click to collapse
Try Flashing AOSP 8.1 ARM64 A-Only device system.img as its more updated than lineage or RROS.
Only, A-Only system.img should work on our device as per treble wiki on github.
TrainerRed said:
Try Flashing AOSP 8.1 ARM64 A-Only device system.img as its more updated than lineage or RROS.
Only, A-Only system.img should work on our device as per treble wiki on github.
Click to expand...
Click to collapse
Hi, I already flashed the AOSP version and it's booted up and working fine but I wanted the lineageOS as it has all the built in customisations. I just don't know why the lineage os didn't work as it was reported above the it's working. Maybe it's the variant thing? I have BND AL-10. I don't know Anyway thanks!!
Thetpcguy said:
Hi, I already flashed the AOSP version and it's booted up and working fine but I wanted the lineageOS as it has all the built in customisations. I just don't know why the lineage os didn't work as it was reported above the it's working. Maybe it's the variant thing? I have BND AL-10. I don't know Anyway thanks!!
Click to expand...
Click to collapse
How is the rom ? Is it can be used as daily driver ?
You still using AOSP or back to EMUI already ?
If you don't mind can you write review of Whats working and Whats Not?
TrainerRed said:
How is the rom ? Is it can be used as daily driver ?
You still using AOSP or back to EMUI already ?
If you don't mind can you write review of Whats working and Whats Not?
Click to expand...
Click to collapse
I installed it without any gapps or anything just bare minimum just to see if it boots or not. Here is what I observed during my short stay:laugh:
1. There is no VOLTE
2. The camera is working
3. I can't talk much about battery but there is no crazy drain as such so yeah
4. I don't know why you said it's the latest but the security patch is the same based on March, 2018 and it's android 8.1
5. The launcher seemed like the ice cream sandwich (Took me back to good ol days)
6. It felt smooth and unusual lag
I can't say much and suggest whether or not you can use it as a daily driver when I never used it as a daily driver. It's your call.
Hit the "Thanks" button if you really feel like thanking me:good:
dcraffam said:
.................................................HOW TO FLASH GSI ON HONOR 7X ................................
DO SO AT OWN RISK I HOLD NO LIABLILTY
LETS BEGIN
1 you must be on stock emui 8 you must not have a pin set or device encrypted or frp lock and boot loader must be unlocked
2 download one of the 3 images listed here ( https://www.xda-developers.com/flash-generic-system-image-project-treble-device/ )
( i personally only tried the ( LineageOS 15.1 phh-Treble Thread) and the (Resurrection Remix phh-Treble Thread) ((((((download the a only arm64image))))))))
3 download the 8.1 pico gaapps package for arm64 found here ( http://opengapps.org/ )
4 now you must download this twrp i know it works from the honor 7x oreo twrp ill upload it or you can download it from the thread
5 flash the twrp twrp_ramdisk_oreo_7-4-18.img linked in fastboot then reboot recovery (note) there will be two recoverys i upload one needed to flash the (gsi) and the other twrpimgmount_ramdisk.img is used to flash (((twrp backup)) to go back to stock oreo as the first one wont boot once the (gsi) is flashed only the mount twrp.img will the( twrp_ramdisk_oreo_7-4-18.img) will boot with the stock emui beta for some reason
6 create full backup with the twrp_ramdisk_oreo_7-4-18.img flashed in step 5 (personally i backed up everything i could )
7 factory reset data using twrp
8 flash the (gsi) image u downloaded in step 2 to system image .......... tap install change the type from zip to image select the (gsi) and flash to system image partion
9 flash pico gapps 8.1 arm 64 ( the rest are to big o flash ))
reboot device tada you booted a stock (gsi)
i couldnt upload recoveries but they can be found here https://forum.xda-developers.com/devdb/project/?id=25826#downloads
to go back to stock emui fastboot recovery flash the twrpimgmount.img factory reset and restore backup some partions will fail like bdm image,, data,, the partions that do uncheck those and restore backup agin flash stock recovery (RECOVERY_RAMDIS.img) and factory reset and you will be on emui8 agin
let me know if you have any problems im going t ry the phh treble aosp (gsi) now
Click to expand...
Click to collapse
Thanks for your detailed steps you documented.
But I did much simpiler. (but i did not flash gapps- so that would need to add some steps)
1. starting from stock EmUI 8 with stock recovery
2. Reboot to recovery perform factory reset.
3. when reset is done, while still in recovery plug in usb to phone and pc
4. select reboot, When screen goes off press and hold volume down. You will boot to fastboot
5. fastboot flash system C:\Users\Mr\Downloads\system-arm64-aonly.img
(your path to file will be different, unless you are also user "mr")
To return to stock do same steps but point fastboot flash to the stock emui system.img
Huawei camera works?
Which will you think better? Aosp lineages rr?
Thx
I tried flashing treble and lineage from twrp but neither worked on my bnd-l24. After flashing it just boots to the fastboot screen.
eskimowarrior7 said:
I tried flashing treble and lineage from twrp but neither worked on my bnd-l24. After flashing it just boots to the fastboot screen.
Click to expand...
Click to collapse
I have flashed to L24-- PHH RRos. It worked ok, gave a verdor image miss-match error.
did you factory reset before booting,
mrmazak said:
I have flashed to L24-- PHH RRos. It worked ok, gave a verdor image miss-match error.
did you factory reset before booting,
Click to expand...
Click to collapse
Yes, even tried the process a few more times. No luck.
eskimowarrior7 said:
Yes, even tried the process a few more times. No luck.
Click to expand...
Click to collapse
each time I started with flash stock recovery, then did factory reset
then from recovery reboot directly to fastboot
and fastboot flash system
mrmazak said:
Thanks for your detailed steps you documented.
But I did much simpiler. (but i did not flash gapps- so that would need to add some steps)
1. starting from stock EmUI 8 with stock recovery
2. Reboot to recovery perform factory reset.
3. when reset is done, while still in recovery plug in usb to phone and pc
4. select reboot, When screen goes off press and hold volume down. You will boot to fastboot
5. fastboot flash system C:\Users\Mr\Downloads\system-arm64-aonly.img
(your path to file will be different, unless you are also user "mr")
To return to stock do same steps but point fastboot flash to the stock emui system.img
Click to expand...
Click to collapse
Hi, Could you tell me which model and variant of Honor 7x you are using. I tried this on BND AL10 and it doesn't boot with all the stuff above. However, I could boot into AOSP GSI.
For BND AL10 users, Only the AOSP GSI is working but both the RR and the Lineage are not working. I tried all three with same method.
1. Wiped/ Factory reset
2. Installed using "fastboot flash system system.img"
I posted this message because I wasted a lot of time & data LOL so maybe this would be helpful to others. However, if somehow you manage to do it on AL10, please post it here.
Thetpcguy said:
Hi, Could you tell me which model and variant of Honor 7x you are using. I tried this on BND AL10 and it doesn't boot with all the stuff above. However, I could boot into AOSP GSI.
Click to expand...
Click to collapse
I'm using the L24
Thetpcguy said:
For BND AL10 users, Only the AOSP GSI is working but both the RR and the Lineage are not working. I tried all three with same method.
1. Wiped/ Factory reset
2. Installed using "fastboot flash system system.img"
I posted this message because I wasted a lot of time & data LOL so maybe this would be helpful to others. However, if somehow you manage to do it on AL10, please post it here.
Click to expand...
Click to collapse
Any updates if I can use it as my daily driver?
Is anyone here have been tested OOS GSI from Erfan GSIs Telegram on Mi 9T? I want to try but i don't know how to flash correctly, what's vendor or firmware and twrp version that i must have, and how many bugs that exist
I try it today
Bugs i notice
1-fingerprint doesnt work
2-camera doesnt work
3-allways on .....
4- some lags
5- some icones look like low resolution
If any developer work on it for our device it will be Great
What vendor and recovery i used
Miui eu stable 11.0.3.0 vendor
Twrp-3.3.1-4-davinci-fix
How to install it
Wipe cache,dalvik,system,data
Install img in system
Flash permissiver_v4
In recovery _advanced _ choose flash Disable_Dm-Verity_ForceEncrypt
memox44 said:
I try it today
Bugs i notice
1-fingerprint doesnt work
2-camera doesnt work
3-allways on .....
4- some lags
5- some icones look like low resolution
If any developer work on it for our device it will be Great
What vendor and recovery i used
Miui eu stable 11.0.3.0 vendor
Twrp-3.3.1-4-davinci-fix
How to install it
Wipe cache,dalvik,system,data
Install img in system
Flash permissiver_v4
In recovery _advanced _ choose flash Disable_Dm-Verity_ForceEncrypt
Click to expand...
Click to collapse
thanks for your reply! is that OOS android 10?
i thought that it would be more stable if we try to use miui 11 android 10 vendor. but, the problem is we must be on twrp for android 10 and with that twrp i cannot find System partition to flash .img, just System image.
There's one in K20 Pro Telegram, that one should work on our device, doing a couple of changes.
Hi Fellas,
Need your help in making my old lenovo A6000plus working again.
I have tried flashing 4 roms so far and got error 7 on 3 out of four. I cant download many roms and try them because of low internet data availability. I hope you can understand.
Out of 4 roms i was only able to flash Lineage OS android 10 rom by dev harsh. But unfortunately that just seems stucked on booting screen and taking eternal to boot. i waited like 4 hours to get that finished but that never did. I guess something is wrong there.
I need your immediate help to make my old phone alive again. i want to give this phone to my younger brother so that he could study from Internet.
I am using TWRP 3.2.2.0.
Consider me kind of noob in resolving issues while flashing.
Thanks in advance.
the same to you
The question is same to you
TWRP Error
Try installing the newest PitchBlack Recovery, I also had problems with stock TWRP, especially 3.2.2, the Pitchblack recovery is based on TWRP 3.3.1, and should solve your problems, if still not, check that the bootloader is unlocked, the system partition isn't read only, and format every partition (not the sd card ofcourse XD)
You can download PitchBlack recovery here: sourceforge.net/projects/pbrp/files/a6000/PitchBlack-a6000-2.9.0-20181119-1229-OFFICIAL.zip/download[/url]
It's a sourceforge link, since they no longer support the a6000
Have a nice day and hope this helps :highfive: