Database Users

Darwish TWPR 3.0.0-0 tool for all MTK devices ONLY!

Welcome to
Darwish TWRP 3.0 Tool
for MTK Devices​
Darwish TWRP Tool is the best tool to auto-port TWRP 3.0.0-0 + for your MTK device , the tool is very easy to use , just run the setup.exe anf follow the instructions.
Features of the tool :
Auto mode :-
- Just follow the instructions on the screen and i will port TWRP for your MTK device.
Porting a working ADB-MTP :-
- You don't have to unpack/repack your recovery and edit the file to get a working ADB-MTP.
Support 6mb partitions :-
- One of the coolest features of this tool that it can port TWRP 3.0.0-0 for your small recovery partition but , some devices have a huge kernel so try your luck.
Supports MTK Devices ONLY! :-
- This TWRP is compiled from the source without adding any themes or anything just a vanilla.
Installation How-to :
1. Double-Click on Setup.exe and follow the instructions.
2. That is all.
Requirements :
- Root. Here
- ADB Drivers. Here
- Enabled USB Debugging. Here
- Disabled driver signature. Here
Compatibility :
This toll is compatible with Gingerbread , Honeycomb , Ice Cream Sandwich , Jelly Bean , KitKat , Lollipop , Marshmallow.
WARNING :
Don't USE IT ON LOCKED BOOTLOADER MTK DEVIECES
SUCH AS
ASUS , HTC , LG , Sony , Motorola and OTHERS.
Before you run the tool don't forget to :
1. Make a ROM backup with MTK droid tools. Here
2. Install falshify & and make another backup of your current recovery and also boot image.
Questions and Answers (FAQ) :
Q : Your tool doesn't work.
A : Everything is explained at the top.
Q : I can't get ADB to work on my PC.
A : Then get one of your device forum Dev to look at this porting tool.
Q : I have an MTK model xxx SoC YYY , does your porting tool support it?
A : the title already said it , for all MTK devices ONLY!
Except sprout devices like MT6580 , Maybe soon i will make the tool support MT6580 devices and more.
Q : I have an MTK device but i am afraid that the tool brick my device.
A : If you are really afraid then don't use it.
Q : After auto-porting TWRP successfully , and i am ready to flash a new custom ROM , but the problem is that after wiping the system from TWRP and then going to flash the ROM it shows Error : 7.
A : This can be fixed by going to mount tab from TWRP then uncheck the system mount partition then flash the ROM as normal.
Screenshots :
Credits
Dees_troy who developed TWRP and his Team
Carliv for his awesome tool Carlivkitchen scripts
Dennis Bareis (dennisbareis.com) for the CTEXT DOS coloring tool
Yann Collect (https://github.com/Cyan4973/lz4) for the lz4
I'm not going to forget my friend Yuweng (the developer who created Easy magic tool) for giving me ideas and helping me creating Darwish TWRP tool , the reason i made this tool because yuweng stopped creating Easy Magic TWRP for several reasons , so i have made Darwish TWRP Tool , lets say the new generation of Easy Magic TWRP , anyway , thanks again for Yuweng
Special thanks for Android Matrix Development Check out there group Here
They have awesome ROMS and you can ask about any problem you face for MTK
XDA:DevDB Information
Darwish TWRP tool, Tool/Utility for all devices (see above for details)
Contributors
XxDishoxX, Yuweng
Version Information
Status: Beta
Created 2016-05-28
Last Updated 2016-05-29

And where is DL link?
Sent from my Arrow using xda premium

Where is the link?

Without links this is a placeholder thread, placeholder threads are not allowed so thread closed.
@XxDishoxX
If you have links you wish to add please contact me and we can open the thread again.

[Tutorial] Meizu m2 note bootloader unlock guide

Finally we have a guide to unlock the bootloader of Meizu m2 note. We need Mediatek SP Flash Tool, MTK phone drivers and the images/bin files for unlocking. No modaco superboot, no fake tutorials any more
Now here's the guide:
1. Download the files I provide
Then unzip it. You'll get a folder with FlashTool, Phone drivers and unlock images.
2.Install drivers for Mediatek platform.
3.Flash the temp-unlock-secro.img via Flashtool.
4.Flash secro.img, lk.bin, preloader_meizu6753_65c_l1.bin via Flashtool.
5.Disconnect USB data cable and power on the phone. If you see the "=>Normal boot" sign(it's quite small.......) in the left bottom cornor of the screen, then the unlock is done. You can now flash things in whatever way you like. The guide is over~~~
The full tutorial is here:https://mega.nz/#!zJxmBDAA!VyYLgPoOfx1P4O7WzSvKVycnbWnYPESzazZGOoIt15w
The unlock tool is here:https://mega.nz/#!zA4zQT4B!c8W5IBPmmglAHwfzhqN3AOnYC2Rs1a_ToRLNBSLCXT8
Thank you for testing&trying!
Update: New link for the unlock tutorial and tools(Google Drive), since I lost my MEGA drive account's master key and I can no longer access to that account xDD
https://drive.google.com/file/d/1mVXr8b7i_H0dUd_ygdlQ882AERBuIczD/view?usp=sharing
https://drive.google.com/file/d/1v2bX8hRdtaVg-VP-VGqhzBpw0pAQeo1C/view?usp=sharing
2020/04/20 Update:IDK if there's still people using m2note, but it seems that GDrive has taken my files down, so here goes another link on OneDrive/Sharepoint, including unlock tools&guide&scatter file which can expand your system partition to 2G/2.5G(not made by me though),use with caution:
https://freeshadow-my.sharepoint.co...1Ci_6r_02ZZVMBDclrX_Zocv6FEdTzl_Co0w?e=mOX7RZ

Hey brother.we had already made 3 mouth hack in meizu m1 metal.But m1metal's system is powed by yunos.so we cannot get root until now.Nowadays,we can flash mx5 system.img by dd if so on flash command,but still unable to get root.I think its uboot's problem.I hope you can help us. 300billions m1 metal user need your help .thk you
Sent from my HTC M8d using XDA-Developers mobile app

aaawqw said:
Finally we have a guide to unlock the bootloader of Meizu m2 note. We need Mediatek SP Flash Tool, MTK phone drivers and the images/bin files for unlocking. No modaco superboot, no fake tutorials ant more
Now here's the guide:
1. Download the files I provide
Then unzip it. You'll get a folder with FlashTool, Phone drivers and unlock images.
2.Install drivers for Mediatek platform.
3.Flash the temp-unlock-secro.img via Flashtool.
4.Flash secro.img, lk.bin, preloader_meizu6753_65c_l1.bin via Flashtool.
5.Disconnect USB data cable and power on the phone. If you see the "=>Normal boot" sign(it's quite small.......) in the left bottom cornor of the screen, then the unlock is done. You can now flash things in whatever way you like. The guide is over~~~
I hope xda-developers can help work out a recovery image:fingers-crossed::fingers-crossed: If you can port the recovery and it works well, just leave a comment here I need that very much
PS: I tried to port a TWRP recovery from Elephone P8000 but the screen is upside down I tried to add ro.sf.hwrotation=180 in default.prop but it didn't work And I also tried to add setprop ro.sf.hwrotation 180 in init.rc. It didn't work as well:crying: Who can help fix this? Or I need to compile the TWRP myself?)
The full tutorial is here:https://mega.nz/#!zJxmBDAA!VyYLgPoOfx1P4O7WzSvKVycnbWnYPESzazZGOoIt15w
The unlock tool is here:https://mega.nz/#!zA4zQT4B!c8W5IBPmmglAHwfzhqN3AOnYC2Rs1a_ToRLNBSLCXT8
Thank you for testing&trying!
Click to expand...
Click to collapse
Some screenshots of unlock~~~
It shows it is still locked but we are able to flash recovery via fastboot or flashtool

[email protected] said:
Hey brother.we had already made 3 mouth hack in meizu m1 metal.But m1metal's system is powed by yunos.so we cannot get root until now.Nowadays,we can flash mx5 system.img by dd if so on flash command,but still unable to get root.I think its uboot's problem.I hope you can help us. 300billions m1 metal user need your help .thk you
Sent from my HTC M8d using XDA-Developers mobile app
Click to expand...
Click to collapse
M1 metal is powered by YunOS, and it have a system service called"AntiRoot". As we all know, the antiroot in YunOS is very powerful which is extremely hard to hack. Now you can only use Kingroot to get "Fake Root",which can't edit the system partition. I'm using m2 note(M571) so I can't help u about that, sorry

Oh, and remember this tutorial WON'T WORK on Meizu M571C (meizu m2 note China Telecom version ). We are still working on that but we don't have the phone to test our work.

meizu os version
using os version? when you open ur m2 note bootloader? Thank you

titoerlangga30 said:
using os version? when you open ur m2 note bootloader? Thank you
Click to expand...
Click to collapse
I have tested on Flyme 4.5.3A and Flyme 5.1.4.0A. It worked. And I'm going to write a easier toturial soon, by shell script.

titoerlangga30 said:
using os version? when you open ur m2 note bootloader? Thank you
Click to expand...
Click to collapse
Our bootloader has some problems, so it will always shows it is locked, but in fact it can be uocked by my method, and we are able to flash recovery partition. I ported one but it's buggy, so I won't release it until problem resolved. The screen is upside down but touch is ok. Th only way to fix it is to compile the full image, but my computer's performance is so poor.... Could u help me bro?

Sorry i cant help you.. my pc is not powerfull too and i dont have knowladge about it.. I wish someone can help u better.. and you can release custom rom or custom recovery for our Meizu m2 note.. peacee..

Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator

Giuppygrass said:
Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator
Click to expand...
Click to collapse
Please see the full guide I provided in the link
It has showed this.

Giuppygrass said:
Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator
Click to expand...
Click to collapse
I tested it on 4.5.3A and 5.1.4.0A.
This guide only change the ""secro" partition, "preloader" and "lk"(bootloader). It does not depend on your firmware version. So be relax and try it
Hope your Google translater works well

How about in the guide:
And change the Scatter to this file:
Now choose temp-unlock-secro.img and select it.
but it always fails because it is not a scatter but .img

Giuppygrass said:
How about in the guide:
And change the Scatter to this file:
Now choose temp-unlock-secro.img and select it.
but it always fails because it is not a scatter but .img
Click to expand...
Click to collapse
The scatter file is "MT6753_Android_scatter.txt", not the img maybe i insert a wrong picture there

what about mx4 pro (Exynos 5430 Octa) ?

hello we are new to and TWRP custom rom ??

I have build a TWRP recovery from the newest CM12.1 and TWRP source code.
Here's the link: https://mega.nz/#!ychBnTSb!wL6qicJ2KCpwnhHNImEhhk2OGuEKThxcDk2tj0iGuP0
Problems: Sometimes /cache partition can't be mounted. You can flash preloader, lk and secro partition again to solve this.
And the CPU Temperature clock doesn't work. It always shows 0 Degree...... I'll try to fix it.
Other functions works well Try it!
Before you flash it by Flash tool or fastboot or other tools, remember to remove /system/recovery-from-boot.p
That file will restore the flyme recovery at boot~

I would try but it is not clear how to use flash tool can make images of where to load the various files?
thank you

Giuppygrass said:
I would try but it is not clear how to use flash tool can make images of where to load the various files?
thank you
Click to expand...
Click to collapse
Run Flash Tool.
Load the scatter file first, then click the blank after "recovery", then load the recovery image. Click download then your phone will get TWRP recovery.
Remember to remove /system/recovery-from-boot.p first or your recovery will go back to flyme one

After installing the twrp have you tried to reflash a flyme rom ? Does it works or the official rom have some checks in the zip file to remove ?
Inviato dal mio m2 note utilizzando Tapatalk

[HOWTO] Flash TWRP and Flash CM+GApps [Meizu M2 Note]

Hi to everybody
I'm doing this thread because I've seen that there's a lot of confussion about how to install all this things properly, and I think that concentrating the wide-spread information could help you to get rid of this. First of all I have to thanks @aaawqw and @Moyster for their great efforts.
This is going to be a recopilatory of several sources and personal tips to help you to do this the easiest way. I'm not responsible of bricked phones nor your personal problems.
Please, read the full tutorial before doing anything, to avoid bricks and those things.
PREPARE THE RECIPE
Download these files:
- Unlocking bootloader tool: HERE
- TWRP image from Moyster (creator of LOS14 for our device): here
- If you want to install a modified version of FlymeOS, use this one from Romul35 from 4PDA: here. Original post
- Last LineageOS 14 build: from this thread. PLEASE DON'T FORGET TO THANK THE DEVELOPERS
- GApps: here I recommend the nano option. Choose ARM64 and Android version 6.0.
Put those three last files into your internal memory. If you've got an microSD card, I recommend you to put them into it (it's safer and easier).
UNLOCKING THE BOOTLOADER
To unlock the bootloader go to:
- Kevin.MX @aaawqw) post: here
Finally we have a guide to unlock the bootloader of Meizu m2 note. We need Mediatek SP Flash Tool, MTK phone drivers and the images/bin files for unlocking. No modaco superboot, no fake tutorials any more
Now here's the guide:
1. Download the files I provide
Then unzip it. You'll get a folder with FlashTool, Phone drivers and unlock images.
2.Install drivers for Mediatek platform.
3.Flash the temp-unlock-secro.img via Flashtool. (secro row)
4.Flash secro.img, lk.bin, preloader_meizu6753_65c_l1.bin via Flashtool. (secro, lk and preloader rows respectively)
5.Disconnect USB data cable and power on the phone. If you see the "=>Normal boot" sign(it's quite small.......) in the left bottom cornor of the screen, then the unlock is done. You can now flash things in whatever way you like. The guide is over~~~
The full tutorial is here
The unlock tool is here
Thank you for testing&trying!
If you've seen this spoiler and didn't thank Kevin, please go to here and thank him. This motivates him and gives him the recognisement he deserves.
- Robot Hijau 97 Youtube video: here It isn't in English, but may help if you find any problem or get lost during the unlocking. Leave him a like if it helped you.
This unlocking guide only works for M571 model. If you try this with a M571C (China Telecom) model, you'll get a bricked phone (very useful if you like paperweights )
THIS METHOD DOES WORK FOR M571H MODEL. DON'T WORRY, THE ONLY ONE THAT GIVES SOME ISSUES IS THE M571C.
The great user @aaawqw states "And Meizu M571C should use the same method of meizu m2 (mini), a shell script for frp unlock. But no recovery images yet…Different hardware and partitions"
Tips to unlock the bootloader easily:
- If you're going to do it from a Windows 10 or 8 pc, have in mind that to install unsigned drivers you'll have to unlock the feature in your pc. A guide to do this: here
- Select the images to flash and hit the Download button before connecting your Meizu (pressing Vol Down button). This will help you if it turns on and off and makes the flashing impossible.
- Download the guide or see the video to correctly follow all the steps. You don't want to lose your phone, don't you? Don't try to mix guides, because you may skip a step and brick your phone. The video and Kevin.MX guide are the same procedure, they both are safe.
INSTALLING TWRP
Once done this part, we'll proceed with the installation of TWRP recovery image. There are two ways, choose the easier to you:
- Flash TWRP from SP Flashtool (original idea from @widagdag. The post: here)
+Turn off your device
+ By using your pc or laptop, extract the TWRP zip for meizu m2 note, there's a file "recovery.img"
+ You can flash it via SP flash tool (clicking the recovery, then select the file)... then click Download, wait until finished!! (Check symbol)
+ You can reboot ur device now, unlocked bootloader and installed twrp!
*The profit is u didn't need to root first and install any flash tool such as Rash, FlashFire, Flashify, etc. saving you some time
Click to expand...
Click to collapse
- Flash the recovery image from Flyme:
+ Get root access (if you do, skip this step). You can get it downloading Kingroot: here. Just install this apk and follow the steps
+ Unzip TWRP zip into a known folder
+ Download Flashify from the Playstore
+ Grant superuser access
+ (Optional) make a backup of your current recovery going to backup tab
+ Tap Recovery Image
+ Choose a file
+ Find TWRP img that you unzipped before and flash it
Click to expand...
Click to collapse
INSTALLING CM AND GAPPS
We're close to the end of this post. The final step: installing your desired ROM and GApps. I will flash CM from the thread whose link is at the download section.
I hope you've put it into your memory (internal/external) as we said
Ok so:
- Turn off your phone
- Go into the TWRP recovery (Vol up+power)
- (Optional but recommended) Make a backup of Flyme, just in case you don't like the new ROM and would like to go back to Flyme. If it takes up too much memory, move it to your pc after making the backup.
- Go to Wipe menu
- Go to advanced wipe
- Select these:
+ System
+ Cache
+ Dalvik Cache
+ Data
- Swipe to do the wipe
- Go to install.
- Select your zip image (in my case the cm13 I downloaded).
- Install also the GApps zip file you downloaded
- Restart to System, and check what you've done.
Some final tips:
- Make the backup, seriously, it takes 10 min and you'll have a Flyme backup if you don't like CM.
- If you want to transfer all your apps and their data from Flyme to your new ROM, use Titanium Backup.
- If you want to install Xposed Framework, it's the same procedure: enter into TWRP, tap install, select the zip and swipe.
- This won't delete your images or videos, but I would recommend to transfer them to a microSD card or your PC.
- Yes, you need to do all this to install a custom ROM. Yes, even unlocking the bootloader. Don't try to skip a step if you aren't sure about what you're doing.
I think that's all, I'll update this post if I lost anything.
I hope this helped you to move into CM world. If you have any doubt don't hesitate to ask.
I know this seems exhausting, but trust me, it worths it. Welcome to the custom ROMs world in your Meizu M2 Note. Let the magic begin.
ADDITIONAL GUIDES
RELOCKING THE BOOTLOADER
If you want to relock the bootloader just follow this simple steps:
Flash the original recovery image from Flashtool of from Flashify (the steps are the same as installing TWRP). You can find this image here
From there, install an update.zip (download them from the official flyme web: here and put it into the storage )
Now you have flyme again with a locked bootloader.
INSTALLING FLYME WITH TWRP
It's very important that you don't install an update.zip from the original Flyme page, because you will cause a bootloop. To get the flyme updates, you can follow one of these two methods:
METHOD 1: 4PDA
-Download the modified zips from 4PDA: here]. Translate it to English. It's on custom firmware>Flyme
-Flash them from TWRP
METHOD 2: DO IT YOURSELF
-Download the update.zip file from the Flyme page
-Open it and remove the preloader- files
-Flash it from TWRP. It will give you an error: IGNORE IT.
Reboot and done, you've got Flyme and TWRP.
UNBRICK A PAPERWEIGHT
BIG THANKS TO @numpea FOR THIS:
This just a firmware that has all the partitions and can be used to unbrick to device using SPFlashtool
Here is the link:
FIRMWARE
- Flash temp_unlock_secro.img with sp flashtool like you do when unlocking the bootloader.
- When done, disconnect the device and add the firmware to sp flashtool. You need to select "format all+download", click on "Download" and connect the device. The flashing process will start. After it finishes, the device will start again.
You wil notice that you lost your imei number you can add it back by:
Using MTK Engineering Mode (does not requires root)
Open engineering mode » Click on Engineer Mode (MTK) » Swipe left to Connectivity » click on CDS Information » Radio Information
Click on phone 1 if you want to change your sim 1 or choose Phone 2 to change sim 2 IMEI, follow this guide:
For Phone 1: “AT+ EGMR=1,7,”YOUR NEW IMEI NO” (make sure you add a space in between AT+ & EGMR)
For Phone 2: “AT+ EGMR=1,10,”YOUR NEW IMEI NO” (make sure you add a space in between AT+ & EGMR)
Using Chamelephon (requires root, but much more easier)
Just copy the IMEIS from the phone's box and put them into the app.
hope this is helpful
Click to expand...
Click to collapse
I'll keep updating the info!

Really complete, I could unlock my M2 Note and install CM-12.1 ! Thanks !

Moyster said:
Really complete, I could unlock my M2 Note and install CM-12.1 ! Thanks !
Click to expand...
Click to collapse
Moyster xDD :laugh::laugh: Thanks to you, without you this wouldn't have been possible

Pretty much covered all, just state the Armv7 Android level API 21 64bit, 5.1 Micro or Nano for gapps. They might get confused on what to choose.

Xtian Rey said:
Pretty much covered all, just state the Armv7 Android level API 21 64bit, 5.1 Micro or Nano for gapps. They might get confused on what to choose.
Click to expand...
Click to collapse
Very true, thanks a lot. I introduced the platform and the Android version of GApps

Thanks nice guide... Very useful for everyone who want play and modified the M2 note.

"This unlocking guide only works for M571 model. If you try this with a M571C (China Telecom) model, you'll get a bricked phone (very useful if you like paperweights*)"
I Am Using M571C, But Everything Fine.
Sent from my M2 Note using XDA Forums Pro.

Mr0oHo0 said:
"This unlocking guide only works for M571 model. If you try this with a M571C (China Telecom) model, you'll get a bricked phone (very useful if you like paperweights*)"
I Am Using M571C, But Everything Fine.
Sent from my M2 Note using XDA Forums Pro.
Click to expand...
Click to collapse
I include this on the guide. I read it bricked the phone in several cases, but I'm glad yours didn't.

Thanks for your guideline , it helps a lot !

Great work lol
Another thing is…ShevT's recovery has no problem in cache partition.Only my broken recovery did… So remove the cache fixing partAny problem just send me a private message. I'll check when i have time.
---------- Post added at 04:00 PM ---------- Previous post was at 03:58 PM ----------
And Meizu M571C should use the same method of meizu m2 (mini), a shell script for frp unlock. But no recovery images yet…Different hardware and partitions…
Another thing is, Kingroot is not suggested. It cannot be detected by Flashfire and some other tools. And cannot be replaced by SuperSU. So Kingo Root+SuperSU might be better.

aaawqw said:
Great work lol
Another thing is…ShevT's recovery has no problem in cache partition.Only my broken recovery did… So remove the cache fixing partAny problem just send me a private message. I'll check when i have time.
---------- Post added at 04:00 PM ---------- Previous post was at 03:58 PM ----------
And Meizu M571C shoukd use the same method of meizu m2 (mini), a shell script for frp unlock. But no recovery images yet…Different hardware and partitions…
Click to expand...
Click to collapse
https://github.com/Moyster/android_device_meizu_m2note/blob/cm-12.1/BoardConfig.mk#L10
Line 10 to 15 you have the partitions size
Code:
$ cat /proc/partinfo
example :
Name------------Start-------------Size
recovery 0x0000000004840000 0x0000000001400000
Take the Size value : "0x0000000001400000" => hexadecimal to decimal => 20971520 = recovery partition size
PS: I don't think the hardware is "that" different, at least, the kernel meizu released should contain both phone models/drivers

This unlocking guide only works for M571 model.
Click to expand...
Click to collapse
Mine is M571H, can I proceed?

Qeemi said:
This unlocking guide only works for M571 model.
Mine is M571H, can I proceed?
Click to expand...
Click to collapse
Mine too and it worked. I can't assure you anything, but I think that the problem are m571C which are different. Good luck if you're going to give it a try!

Moyster said:
https://github.com/Moyster/android_device_meizu_m2note/blob/cm-12.1/BoardConfig.mk#L10
Line 10 to 15 you have the partitions size
Code:
$ cat /proc/partinfo
example :
Name------------Start-------------Size
recovery 0x0000000004840000 0x0000000001400000
Take the Size value : "0x0000000001400000" => hexadecimal to decimal => 20971520 = recovery partition size
PS: I don't think the hardware is "that" different, at least, the kernel meizu released should contain both phone models/drivers
Click to expand...
Click to collapse
See it. I'll give a try on m2 note(M571C, China Telecom). At least try to build twrp But seems my pc's hdd is not enough No space for source code

little problems.
bootloader unlocking and twrp and roms works very well..
1. OTG is working for me.. :good:
2. unfortunately my phone is not detected by PC..
(show USB is not connected, USB debugging is not accessible..)
3. little bit lag here and there..
4. wifi works well :good:
Need more optimization.. Expecting lot more from you
thankyou very much for this :good:
DOUBT : so bootloader is unlocked, now it is possible to make good MM and N based CM roms ?

dinkan01 said:
bootloader unlocking and twrp and roms works very well..
1. OTG is working for me.. :good:
2. unfortunately my phone is not detected by PC..
(show USB is not connected, USB debugging is not accessible..)
3. little bit lag here and there..
4. wifi works well :good:
Need more optimization.. Expecting lot more from you
thankyou very much for this :good:
DOUBT : so bootloader is unlocked, now it is possible to make good MM and N based CM roms ?
Click to expand...
Click to collapse
hi,which build of cm 12 you put in phone?

M571U
I have the Meizu M571U Model. Can I do this or will it be bricked?
Thank you very much

venturaj said:
I have the Meizu M571U Model. Can I do this or will it be bricked?
Thank you very much
Click to expand...
Click to collapse
It won't, the only problematic model is the M571C, have fun

LBA97 said:
It won't, the only problematic model is the M571C, have fun
Click to expand...
Click to collapse
How can I check which model my m2 note is..?

[email protected] said:
How can I check which model my m2 note is..?
Click to expand...
Click to collapse
Check the store page you bought it from. If you bought it from China, then probably it's a M571C. Good luck

ZTE Blade A2 Plus Rooting( SuperSU or Magisk),Recovery & Flashing Stock Rom

Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You

MIUI 9 For A610 Plus
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]

Rajevpmavoor said:
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]
Click to expand...
Click to collapse
Although the rom is bugless but, unfortunately VOLTE didn't work.

MIUI 9 For A610 Plus
Did you flash this new MIUI 9 ROM , I think it has volte and it is in Android M.

Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
does it boot into meta mode on pressing volume down+power button??( bcoz my fone boots into meta mode on doing so)
and how to go into bootloader?
while using sp flash tool i power off the fone and then connect it to sp flash tool via usb cable ...fone gets detected and but download for twrp doesnt occur ..it says PMT changed for the rom, select format all+ download ....
but i didnt do format all coz i dont have flashable stock rom...

I lost my IMEI after flash ROM, not able to retrieve IMEI

Issue in camera & Finger Lock
Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
I have checked both ROM, Miui ROM camera is look like .02MB, No VOLTE, Finger Print lock is not working

Thanks. I have messed up anyway...
Anybody have a complete Readback (Using SP-Flash Tools) copy of (volte) rom?
I lost Imei, From the given NVram.bin, Could not edit Imei using BPGL.... pull as Maui Meta and SN writer can not do this with present update.
I need to revert back. please help with ROM copy and NVRAM Edit.

Alfonso Osnofla said:
Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You
Click to expand...
Click to collapse
Just try http://www.ztedevice.com/support/detail?id=FE22BEF5C33D4A17BCDA20AAE2631951 ( http://download.ztedevice.com/support/product/569/201802111051594/sd/20180211105554767.zip )
sd card update using twrp.
But first remove the first line from update script file located inside the zip.
Just reply.

Need MIUI rom
Heyy plz gime me teh rom for zte blade A2 plus i really need a miui rom for zte blade A2 plus...

Help I'm confused.
Reading the comments i got to know that many people lost their IMEI and VOLTE , I want to root the device So can anyone tell me when does this problem occur (loosing volte and imei) during rooting or while flashing a custom rom?

kingksath said:
I lost my IMEI after flash ROM, not able to retrieve IMEI
Click to expand...
Click to collapse
Did you loose your IMEI on rooting or while flashing any custom Rom?

http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update

vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
What is it for?
Is it for volte?

vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
Is this an update to the Stock Rom?

hi, can u help me please, iam tryin to update with twrp , i did remove first line from script but i have error.

Found a way to unlock bands on MTK based phones by flashing basebands from phones with the same chipset. Doing this by using SPFLASH and flashing md1 files. Still unable to connect to cell network on my Doogee bl12000. Flashed this phones MD1, was wondering if anybody could provide me with the nvdata and nvram from the ZTE blase a2 plus. Hoping by flashing those files can connect to a U.S. network.

KW98 - twrp and rooting

Hello,
I am using kingwear 98 (kw98)
https://www.smartwatchspecifications.com/Device/kingwear-kw98/
It's a smart watch based on MTK6580.
I am trying to understand what is the best method to install twrp on mediatek devices.
1. Is it by using the magic twrp installer ?
2. Or by manually porting twrp to our specific device , as seen in some tutorials here (porting twrp with same chipset into socket recovery)?
Well, actually I did try a 3rd option:[/B][/B]
3. I tried to use AllCall-W1_recovery recovery.img ( which has the same chipset).
https://mega.nz/#!kfgmmRRD!RcvPwf0Jc-BAwM4Sf9fYJrmF3DsTQTEYtE2LVeWyE10
Surprisingly it worked . Yet, after several days without issues, last week it became dead.
So, I don't understand how it worked in the first place (it is same chipset, but probably use totally different interface , and drivers ! ) , and if it became dead because something it might be wrong to put same recovery image of another device, without. proper porting.
So, should I flash same image (allcall W1 recovery) again on a new kw98 device that I will buy, or use one of the above methods (port twrp manually into my stock, or install magic twrp for mediatek).
Thank you,
ranran