Finally we have a guide to unlock the bootloader of Meizu m2 note. We need Mediatek SP Flash Tool, MTK phone drivers and the images/bin files for unlocking. No modaco superboot, no fake tutorials any more
Now here's the guide:
1. Download the files I provide
Then unzip it. You'll get a folder with FlashTool, Phone drivers and unlock images.
2.Install drivers for Mediatek platform.
3.Flash the temp-unlock-secro.img via Flashtool.
4.Flash secro.img, lk.bin, preloader_meizu6753_65c_l1.bin via Flashtool.
5.Disconnect USB data cable and power on the phone. If you see the "=>Normal boot" sign(it's quite small.......) in the left bottom cornor of the screen, then the unlock is done. You can now flash things in whatever way you like. The guide is over~~~
The full tutorial is here:https://mega.nz/#!zJxmBDAA!VyYLgPoOfx1P4O7WzSvKVycnbWnYPESzazZGOoIt15w
The unlock tool is here:https://mega.nz/#!zA4zQT4B!c8W5IBPmmglAHwfzhqN3AOnYC2Rs1a_ToRLNBSLCXT8
Thank you for testing&trying!
Update: New link for the unlock tutorial and tools(Google Drive), since I lost my MEGA drive account's master key and I can no longer access to that account xDD
https://drive.google.com/file/d/1mVXr8b7i_H0dUd_ygdlQ882AERBuIczD/view?usp=sharing
https://drive.google.com/file/d/1v2bX8hRdtaVg-VP-VGqhzBpw0pAQeo1C/view?usp=sharing
2020/04/20 Update:IDK if there's still people using m2note, but it seems that GDrive has taken my files down, so here goes another link on OneDrive/Sharepoint, including unlock tools&guide&scatter file which can expand your system partition to 2G/2.5G(not made by me though),use with caution:
https://freeshadow-my.sharepoint.co...1Ci_6r_02ZZVMBDclrX_Zocv6FEdTzl_Co0w?e=mOX7RZ
Hey brother.we had already made 3 mouth hack in meizu m1 metal.But m1metal's system is powed by yunos.so we cannot get root until now.Nowadays,we can flash mx5 system.img by dd if so on flash command,but still unable to get root.I think its uboot's problem.I hope you can help us. 300billions m1 metal user need your help .thk you
Sent from my HTC M8d using XDA-Developers mobile app
aaawqw said:
Finally we have a guide to unlock the bootloader of Meizu m2 note. We need Mediatek SP Flash Tool, MTK phone drivers and the images/bin files for unlocking. No modaco superboot, no fake tutorials ant more
Now here's the guide:
1. Download the files I provide
Then unzip it. You'll get a folder with FlashTool, Phone drivers and unlock images.
2.Install drivers for Mediatek platform.
3.Flash the temp-unlock-secro.img via Flashtool.
4.Flash secro.img, lk.bin, preloader_meizu6753_65c_l1.bin via Flashtool.
5.Disconnect USB data cable and power on the phone. If you see the "=>Normal boot" sign(it's quite small.......) in the left bottom cornor of the screen, then the unlock is done. You can now flash things in whatever way you like. The guide is over~~~
I hope xda-developers can help work out a recovery image:fingers-crossed::fingers-crossed: If you can port the recovery and it works well, just leave a comment here I need that very much
PS: I tried to port a TWRP recovery from Elephone P8000 but the screen is upside down I tried to add ro.sf.hwrotation=180 in default.prop but it didn't work And I also tried to add setprop ro.sf.hwrotation 180 in init.rc. It didn't work as well:crying: Who can help fix this? Or I need to compile the TWRP myself?)
The full tutorial is here:https://mega.nz/#!zJxmBDAA!VyYLgPoOfx1P4O7WzSvKVycnbWnYPESzazZGOoIt15w
The unlock tool is here:https://mega.nz/#!zA4zQT4B!c8W5IBPmmglAHwfzhqN3AOnYC2Rs1a_ToRLNBSLCXT8
Thank you for testing&trying!
Click to expand...
Click to collapse
Some screenshots of unlock~~~
It shows it is still locked but we are able to flash recovery via fastboot or flashtool
[email protected] said:
Hey brother.we had already made 3 mouth hack in meizu m1 metal.But m1metal's system is powed by yunos.so we cannot get root until now.Nowadays,we can flash mx5 system.img by dd if so on flash command,but still unable to get root.I think its uboot's problem.I hope you can help us. 300billions m1 metal user need your help .thk you
Sent from my HTC M8d using XDA-Developers mobile app
Click to expand...
Click to collapse
M1 metal is powered by YunOS, and it have a system service called"AntiRoot". As we all know, the antiroot in YunOS is very powerful which is extremely hard to hack. Now you can only use Kingroot to get "Fake Root",which can't edit the system partition. I'm using m2 note(M571) so I can't help u about that, sorry
Oh, and remember this tutorial WON'T WORK on Meizu M571C (meizu m2 note China Telecom version ). We are still working on that but we don't have the phone to test our work.
meizu os version
using os version? when you open ur m2 note bootloader? Thank you
titoerlangga30 said:
using os version? when you open ur m2 note bootloader? Thank you
Click to expand...
Click to collapse
I have tested on Flyme 4.5.3A and Flyme 5.1.4.0A. It worked. And I'm going to write a easier toturial soon, by shell script.
titoerlangga30 said:
using os version? when you open ur m2 note bootloader? Thank you
Click to expand...
Click to collapse
Our bootloader has some problems, so it will always shows it is locked, but in fact it can be uocked by my method, and we are able to flash recovery partition. I ported one but it's buggy, so I won't release it until problem resolved. The screen is upside down but touch is ok. Th only way to fix it is to compile the full image, but my computer's performance is so poor.... Could u help me bro?
Sorry i cant help you.. my pc is not powerfull too and i dont have knowladge about it.. I wish someone can help u better.. and you can release custom rom or custom recovery for our Meizu m2 note.. peacee..
Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator
Giuppygrass said:
Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator
Click to expand...
Click to collapse
Please see the full guide I provided in the link
It has showed this.
Giuppygrass said:
Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator
Click to expand...
Click to collapse
I tested it on 4.5.3A and 5.1.4.0A.
This guide only change the ""secro" partition, "preloader" and "lk"(bootloader). It does not depend on your firmware version. So be relax and try it
Hope your Google translater works well
How about in the guide:
And change the Scatter to this file:
Now choose temp-unlock-secro.img and select it.
but it always fails because it is not a scatter but .img
Giuppygrass said:
How about in the guide:
And change the Scatter to this file:
Now choose temp-unlock-secro.img and select it.
but it always fails because it is not a scatter but .img
Click to expand...
Click to collapse
The scatter file is "MT6753_Android_scatter.txt", not the img maybe i insert a wrong picture there
what about mx4 pro (Exynos 5430 Octa) ?
hello we are new to and TWRP custom rom ??
I have build a TWRP recovery from the newest CM12.1 and TWRP source code.
Here's the link: https://mega.nz/#!ychBnTSb!wL6qicJ2KCpwnhHNImEhhk2OGuEKThxcDk2tj0iGuP0
Problems: Sometimes /cache partition can't be mounted. You can flash preloader, lk and secro partition again to solve this.
And the CPU Temperature clock doesn't work. It always shows 0 Degree...... I'll try to fix it.
Other functions works well Try it!
Before you flash it by Flash tool or fastboot or other tools, remember to remove /system/recovery-from-boot.p
That file will restore the flyme recovery at boot~
I would try but it is not clear how to use flash tool can make images of where to load the various files?
thank you
Giuppygrass said:
I would try but it is not clear how to use flash tool can make images of where to load the various files?
thank you
Click to expand...
Click to collapse
Run Flash Tool.
Load the scatter file first, then click the blank after "recovery", then load the recovery image. Click download then your phone will get TWRP recovery.
Remember to remove /system/recovery-from-boot.p first or your recovery will go back to flyme one
After installing the twrp have you tried to reflash a flyme rom ? Does it works or the official rom have some checks in the zip file to remove ?
Inviato dal mio m2 note utilizzando Tapatalk
Related
Hi, here's guide from @xen0n for CM12.1 for Meizu MX4.
Original Link：http://blog.xen0n.name/2016/01/12/meizu-mx4-cm-12.1-userdebug-8/
## Disclaimer and acknowledgements
All your actions with your phone are at your own risk; the author of this ROM is not liable.
This ROM is compiled from CyanogenMod 12.1 sources with own modifications (which are open-sourced on GitHub). I'd like to acknowledge the following people for their respective efforts:
- kirill8000 and kkk4 for unlocking bootloader of ordinary MX4's
- Axet and fire855 for the general MTK porting efforts
- DerTeufel for the information regarding to the MTK GPS implementation
- cofface's CWM recovery
- ccfxny support and fix
- Daxiaamu's one-key bootloader unlocking app (in Chinese)
YOU NEED: (Thanks for @zaurikk)
1. Download Flyme OS 4.2.8.2A stock firmware an official webpage Meizu
2. Flash it in stock recovery and select WIPE DATA
3. Get root permission
4. Download and install that APK
5. Open that app, and provide root permission.
6. Press "Press to UNLOCK BootLoader" - and wait, you will see "Unlock Finished"
7. After, will be available recovery mode, and you press to "Enter Recovery Mode"
8. Your phone reboot and enters for normal recovery - TWRP 2.8.6.0
9. Flash CyanogenMod12.1 for meizu MX4 (20160106) 【360（code:78c8）】
## OTHERS:
- come back to FLYME:flash patched-recovery-mx4 with flashify and then flash update.zip(offficial)
- Android version of MX4 please download the contents of the MX4 directory, Ubuntu version please download the contents of the Arale directory
Help pls.I wanna install that rom. What i need to do if i can not login in flyme acс.
The blisspop: http://pan.baidu.com/s/1qXr8kqg (F5 kernel)
http://pan.baidu.com/s/1eRzuaOy (F4 kernel)
dOMnin said:
Help pls.I wanna install that rom. What i need to do if i can not login in flyme acс.
Click to expand...
Click to collapse
You must make sure that you can get Root , then you can use the software to unlock (BL).
I understand it. But maybe u know, how i can get root?
dOMnin said:
I understand it. But maybe u know, how i can get root?
Click to expand...
Click to collapse
KingRoot is 100% working
dOMnin said:
I understand it. But maybe u know, how i can get root?
Click to expand...
Click to collapse
The Flyme4.2.8.2 have ROOT, but you must login first. If you forget, you can ask your friend borrow a account.
【Settings——Accounts——Personal settings——System privileges——open】
The main problem is - my phone is second hand. When i try to login in my acc, phone don't do than because first user not log off in his flyme acc. I wrote in meizu support but they can not help me because i dont have invoice. First user cant help me.
dOMnin said:
The main problem is - my phone is second hand. When i try to login in my acc, phone don't do than because first user not log off in his flyme acc. I wrote in meizu support but they can not help me because i dont have invoice. First user cant help me.
Click to expand...
Click to collapse
You try Kingroot.
what version of flyme firmware i need, on 4.5.4 kingroot not working?
dOMnin said:
what version of flyme firmware i need, on 4.5.4 kingroot not working?
Click to expand...
Click to collapse
You must put your firmware replacement for Flyme4.2.8.2，only this version unlocking brush into the CM not become brick
M461
CN_Victor said:
You must put your firmware replacement for Flyme4.2.8.2，only this version unlocking brush into the CM not become brick
Click to expand...
Click to collapse
Hi, is this working with M461 MX4 (model from China Unicom but in 4.2.8.2A) ? Thank you !
I bricked my phone ( i have unlocked BL and flashed recovery using your app )
Recovery (philz touch) did not work fine -Everything is unmounted. I cant mount /system, /data, /cache beacuse i have: "error- mounting /data" (or /system, /cache)
What can i do ?
I want to fix my phone. Im going to install stock recovery and flash flyme os 4.0.4I - Is it enough ? or i cant to this beacuse i have no mounted /system ??
Please help me guys.
///Can i mount /system using adb sideload ?
furious.builder said:
Hi, is this working with M461 MX4 (model from China Unicom but in 4.2.8.2A) ? Thank you !
Click to expand...
Click to collapse
YES，but now China unicom version may not signal after flash
Maagnum154 said:
I bricked my phone ( i have unlocked BL and flashed recovery using your app )
Recovery (philz touch) did not work fine -Everything is unmounted. I cant mount /system, /data, /cache beacuse i have: "error- mounting /data" (or /system, /cache)
What can i do ?
I want to fix my phone. Im going to install stock recovery and flash flyme os 4.0.4I - Is it enough ? or i cant to this beacuse i have no mounted /system ??
Please help me guys.
///Can i mount /system using adb sideload ?
Click to expand...
Click to collapse
Not do the following flash will brick: unlock BL, update flymeOS4.2.8.2, use this software recovery(not philz);
Now you can enter fastboot or recovery? Or you can send the meizu after-sales,it is free.
CN_Victor said:
Not do the following flash will brick: unlock BL, update flymeOS4.2.8.2, use this software recovery(not philz);
Now you can enter fastboot or recovery? Or you can send the meizu after-sales,it is free.
Click to expand...
Click to collapse
I installed from fastboot stock recovery and flyme os 4.2.8.2, my phone finally works, i tried again to install cm12, and now all works fine, but your recovery is in chinese, i used philz recovery from slowsunet topic.
Everything looks great, finally cm12.
but
I have one question
Where is "more"/"options" navigation button ?
I dont know how to use "more, options" navigation in an application , I hope you know what I mean
Maagnum154 said:
I installed from fastboot stock recovery and flyme os 4.2.8.2, my phone finally works, i tried again to install cm12, and now all works fine, but your recovery is in chinese, i used philz recovery from slowsunet topic.
Everything looks great, finally cm12.
but
I have one question
Where is "more"/"options" navigation button ?
I dont know how to use "more, options" navigation in an application , I hope you know what I mean
Click to expand...
Click to collapse
Goto Settings -> About Phone -> Click build number continuously until developer options is enabled.
domnin said:
what version of flyme firmware i need, on 4.5.4 kingroot not working?
Click to expand...
Click to collapse
路过
CN_Victor said:
can you upload some photos(CM ROM)? I can't upload here.thank you!
And your problem is how to open the developers options？？
Click to expand...
Click to collapse
Goto Settings -> About Phone -> Click build number continuously until developer options is enabled.
Hi, how can I come back to Flyme? Need to flash patched-recovery-mx4 with flashify and then flash update.zip (stable kk) ? Now, I'm in CM12.1 with Philz recovery. Help please
Edit: Just do it, with update and clear data and rules
All your actions with the phone is at your own risk. The authors are not liable. This is just your choice.
PLEASE read full instructions before you start.
RECOMMENDED ONLY FOR EXPERIENCED USERS.
This was tested ONLY on MEIZU MX4 and ONLY FIRMWARE 4.2.8.2A, ANY OTHER FIRMWARE/PHONE - YOU WILL RECEIVE BRICK PHONE.
(с)
ONLY FOR MEIZU MX4 AND ONLY FIRMWARE 4.2.8.2A. Don't use the that apk on Lollipop or your device will brick
Hello everyone, i changed chinese apk for unlock bootloader, and replaced chinese recovery, on TWRP 2 8.6.0 recovery.
1. Download Flyme OS 4.2.8.2A stock firmware an official webpage Meizu
2. Flash it in stock recovery and select WIPE DATA
3. Get root permission
4. Download and install that APK - drive.google.com/open?id=0B_Gd_o_kBWgLNHFuZW5kMlFzV2s
5. Open that app, and provide root permission.
6. Press "Press to UNLOCK BootLoader" - and wait, you will see "Unlock Finished"
7. After, will be available recovery mode, and you press to "Enter Recovery Mode"
8. Your phone reboot and enters for normal recovery - TWRP 2.8.6.0.
Thanks for the great work!
At last we're getting closer to opening up our meizu phones.
Can the phone with this, unlocked bootloader flash "I" international roms from OTA?
How to relock?
ideosx5 said:
How to relock?
Click to expand...
Click to collapse
Reflash FLyme rom (with Flyme recovery, be carefull!)
Or flash stock uboot
Successfully upgraded MX4 "A" edition phone to "I" using following method:
Installed 4.2.8 "A" stock firmware.
1. Installed apk method unlock (this thread).
2. Downloaded 4.5.7 "I" firmware, extracted and created system.img using (linux):
$ sdat2img system.transfer.list system.new.dat system.img
for windows, see this guide from Meizufans.
3. Boot into fastboot mode (now unlocked) using "VOL -" + "POWER"
4. fastboot flash boot boot.img
WAIT
fastboot flash system system.img
WAIT
5.Reboot into recovery
6. Full wipe
7. Install super su
8. Reboot
VOILA - 4.5.7 "I"
Remember to block/deactivate system updates once system has booted for first time.
Is it possible for someone to upload recovery.img of TWRP please ? I'd like to try
---------- Post added at 10:16 AM ---------- Previous post was at 09:22 AM ----------
I got it, I'm fixing the splash screen dimensions ahah^^
---------- Post added at 11:03 AM ---------- Previous post was at 10:16 AM ----------
It was a little harder than I expected but it's here : http://www.mediafire.com/download/26b963db1k489db/new-recovery.img
Learnincurve said:
Successfully upgraded MX4 "A" edition phone to "I" using following method:
Installed 4.2.8 "A" stock firmware.
Click to expand...
Click to collapse
Good, but there is easy way download that rom, and install it for TWRP(select full wipe, include internal storage) - emmaus.pro/MX4_custom_roms/Flyme/4.5.7i_twrp.zip
and there all stock Flyme roms for twrp - emmaus.pro/?dir=MX4_custom_roms/Flyme
Author all rom "nikk3d" russian 4pda users - 4pda.ru/forum/index.php?showuser=2196261
And this method works even on newest firmware, let's say 4.5.6i downgraded to 4.2.8i via 4.0.4i? Or is a easy variant of previous method, patched uboot by meizu remains after 4.5.6i upgrade if i understand, no matter if you downgrate to Kitkat?
update for TWRP : http://www.mediafire.com/download/f6a65ccpgrfaopw/TWRPr5.img
Changelog :
I corrected "Select storage" position, corrected some shifts on the main screen
zaurikk said:
Good, but there is easy way download that rom, and install it for TWRP(select full wipe, include internal storage) - emmaus.pro/MX4_custom_roms/Flyme/4.5.7i_twrp.zip
and there all stock Flyme roms for twrp - emmaus.pro/?dir=MX4_custom_roms/Flyme
Author all rom "nikk3d" russian 4pda users - 4pda.ru/forum/index.php?showuser=2196261
Click to expand...
Click to collapse
I have an MX4 originally with Ubuntu touch, I tried to flash 4.5.7i from emmaus.pro.
It failed, updater binary error. I checked the recovery log and it says write error, no space left.
Does anybody have any clue?
Thanks,
Note: I already tried a wipe out (even internal storage). No issues with the cyanogenmod roms from emmaus.pro.
Is someone trying to make fom Meizu MX5?
Sent from my MX5 using Tapatalk
itresw said:
I have an MX4 originally with Ubuntu touch, I tried to flash 4.5.7i from emmaus.pro.
It failed, updater binary error. I checked the recovery log and it says write error, no space left.
Does anybody have any clue?
Thanks,
Note: I already tried a wipe out (even internal storage). No issues with the cyanogenmod roms from emmaus.pro.
Click to expand...
Click to collapse
i think, mx4 ubuntu touch version, and standard china version, - internal partitions(storage) name - different, so you gives write an error.
isko01 said:
Is someone trying to make fom Meizu MX5?
Sent from my MX5 using Tapatalk
Click to expand...
Click to collapse
Now it is impossible.
zaurikk said:
Now it is impossible.
Click to expand...
Click to collapse
Thanks for reply . Can I know how much is good Caynogenmod on MX4? Is everything working good?
Sent from my MX5 using Tapatalk
isko01 said:
Thanks for reply . Can I know how much is good Caynogenmod on MX4? Is everything working good?
Sent from my MX5 using Tapatalk
Click to expand...
Click to collapse
Yep, all needed function now it work - gsm module, wi-fi, bluetooth and etc.
The only problem, that ROM not officially for Cyanogen team, that rom created by ordinary users and updated 1-2 times on month.
i tried on M2 note, i suppose it bricked.is it possible earlier condition working?i look up some unbrick videos, can repairs make my phone working?thanks.
No way to unbrick it, this is for MX4 not M2 Note !!! You'll need to change the motherboard, sorry
zaurikk said:
Yep, all needed function now it work - gsm module, wi-fi, bluetooth and etc.
The only problem, that ROM not officially for Cyanogen team, that rom created by ordinary users and updated 1-2 times on month.
Click to expand...
Click to collapse
Thanks to all user's who making this for MX4. They are really engineers! I hope they will try for MX5.
Yes, the problem it is not official, and we cant get new update.
Why we don't write a email to Canynogen and tell them that we open the bootloader and put CM. But we want they make CM for MX4 and MX5, with new CM and updates?
Sent from my MX5 using Tapatalk
my meizu is bricked, ne response please help me
hi someone had tested this app already? is it surely gonna work??
and after i will unlock the bootloader i can instal any rom? like Mokee and CM12.1??
Hi to everybody
I'm doing this thread because I've seen that there's a lot of confussion about how to install all this things properly, and I think that concentrating the wide-spread information could help you to get rid of this. First of all I have to thanks @aaawqw and @Moyster for their great efforts.
This is going to be a recopilatory of several sources and personal tips to help you to do this the easiest way. I'm not responsible of bricked phones nor your personal problems.
Please, read the full tutorial before doing anything, to avoid bricks and those things.
PREPARE THE RECIPE
Download these files:
- Unlocking bootloader tool: HERE
- TWRP image from Moyster (creator of LOS14 for our device): here
- If you want to install a modified version of FlymeOS, use this one from Romul35 from 4PDA: here. Original post
- Last LineageOS 14 build: from this thread. PLEASE DON'T FORGET TO THANK THE DEVELOPERS
- GApps: here I recommend the nano option. Choose ARM64 and Android version 6.0.
Put those three last files into your internal memory. If you've got an microSD card, I recommend you to put them into it (it's safer and easier).
UNLOCKING THE BOOTLOADER
To unlock the bootloader go to:
- Kevin.MX @aaawqw) post: here
Finally we have a guide to unlock the bootloader of Meizu m2 note. We need Mediatek SP Flash Tool, MTK phone drivers and the images/bin files for unlocking. No modaco superboot, no fake tutorials any more
Now here's the guide:
1. Download the files I provide
Then unzip it. You'll get a folder with FlashTool, Phone drivers and unlock images.
2.Install drivers for Mediatek platform.
3.Flash the temp-unlock-secro.img via Flashtool. (secro row)
4.Flash secro.img, lk.bin, preloader_meizu6753_65c_l1.bin via Flashtool. (secro, lk and preloader rows respectively)
5.Disconnect USB data cable and power on the phone. If you see the "=>Normal boot" sign(it's quite small.......) in the left bottom cornor of the screen, then the unlock is done. You can now flash things in whatever way you like. The guide is over~~~
The full tutorial is here
The unlock tool is here
Thank you for testing&trying!
If you've seen this spoiler and didn't thank Kevin, please go to here and thank him. This motivates him and gives him the recognisement he deserves.
- Robot Hijau 97 Youtube video: here It isn't in English, but may help if you find any problem or get lost during the unlocking. Leave him a like if it helped you.
This unlocking guide only works for M571 model. If you try this with a M571C (China Telecom) model, you'll get a bricked phone (very useful if you like paperweights )
THIS METHOD DOES WORK FOR M571H MODEL. DON'T WORRY, THE ONLY ONE THAT GIVES SOME ISSUES IS THE M571C.
The great user @aaawqw states "And Meizu M571C should use the same method of meizu m2 (mini), a shell script for frp unlock. But no recovery images yet…Different hardware and partitions"
Tips to unlock the bootloader easily:
- If you're going to do it from a Windows 10 or 8 pc, have in mind that to install unsigned drivers you'll have to unlock the feature in your pc. A guide to do this: here
- Select the images to flash and hit the Download button before connecting your Meizu (pressing Vol Down button). This will help you if it turns on and off and makes the flashing impossible.
- Download the guide or see the video to correctly follow all the steps. You don't want to lose your phone, don't you? Don't try to mix guides, because you may skip a step and brick your phone. The video and Kevin.MX guide are the same procedure, they both are safe.
INSTALLING TWRP
Once done this part, we'll proceed with the installation of TWRP recovery image. There are two ways, choose the easier to you:
- Flash TWRP from SP Flashtool (original idea from @widagdag. The post: here)
+Turn off your device
+ By using your pc or laptop, extract the TWRP zip for meizu m2 note, there's a file "recovery.img"
+ You can flash it via SP flash tool (clicking the recovery, then select the file)... then click Download, wait until finished!! (Check symbol)
+ You can reboot ur device now, unlocked bootloader and installed twrp!
*The profit is u didn't need to root first and install any flash tool such as Rash, FlashFire, Flashify, etc. saving you some time
Click to expand...
Click to collapse
- Flash the recovery image from Flyme:
+ Get root access (if you do, skip this step). You can get it downloading Kingroot: here. Just install this apk and follow the steps
+ Unzip TWRP zip into a known folder
+ Download Flashify from the Playstore
+ Grant superuser access
+ (Optional) make a backup of your current recovery going to backup tab
+ Tap Recovery Image
+ Choose a file
+ Find TWRP img that you unzipped before and flash it
Click to expand...
Click to collapse
INSTALLING CM AND GAPPS
We're close to the end of this post. The final step: installing your desired ROM and GApps. I will flash CM from the thread whose link is at the download section.
I hope you've put it into your memory (internal/external) as we said
Ok so:
- Turn off your phone
- Go into the TWRP recovery (Vol up+power)
- (Optional but recommended) Make a backup of Flyme, just in case you don't like the new ROM and would like to go back to Flyme. If it takes up too much memory, move it to your pc after making the backup.
- Go to Wipe menu
- Go to advanced wipe
- Select these:
+ System
+ Cache
+ Dalvik Cache
+ Data
- Swipe to do the wipe
- Go to install.
- Select your zip image (in my case the cm13 I downloaded).
- Install also the GApps zip file you downloaded
- Restart to System, and check what you've done.
Some final tips:
- Make the backup, seriously, it takes 10 min and you'll have a Flyme backup if you don't like CM.
- If you want to transfer all your apps and their data from Flyme to your new ROM, use Titanium Backup.
- If you want to install Xposed Framework, it's the same procedure: enter into TWRP, tap install, select the zip and swipe.
- This won't delete your images or videos, but I would recommend to transfer them to a microSD card or your PC.
- Yes, you need to do all this to install a custom ROM. Yes, even unlocking the bootloader. Don't try to skip a step if you aren't sure about what you're doing.
I think that's all, I'll update this post if I lost anything.
I hope this helped you to move into CM world. If you have any doubt don't hesitate to ask.
I know this seems exhausting, but trust me, it worths it. Welcome to the custom ROMs world in your Meizu M2 Note. Let the magic begin.
ADDITIONAL GUIDES
RELOCKING THE BOOTLOADER
If you want to relock the bootloader just follow this simple steps:
Flash the original recovery image from Flashtool of from Flashify (the steps are the same as installing TWRP). You can find this image here
From there, install an update.zip (download them from the official flyme web: here and put it into the storage )
Now you have flyme again with a locked bootloader.
INSTALLING FLYME WITH TWRP
It's very important that you don't install an update.zip from the original Flyme page, because you will cause a bootloop. To get the flyme updates, you can follow one of these two methods:
METHOD 1: 4PDA
-Download the modified zips from 4PDA: here]. Translate it to English. It's on custom firmware>Flyme
-Flash them from TWRP
METHOD 2: DO IT YOURSELF
-Download the update.zip file from the Flyme page
-Open it and remove the preloader- files
-Flash it from TWRP. It will give you an error: IGNORE IT.
Reboot and done, you've got Flyme and TWRP.
UNBRICK A PAPERWEIGHT
BIG THANKS TO @numpea FOR THIS:
This just a firmware that has all the partitions and can be used to unbrick to device using SPFlashtool
Here is the link:
FIRMWARE
- Flash temp_unlock_secro.img with sp flashtool like you do when unlocking the bootloader.
- When done, disconnect the device and add the firmware to sp flashtool. You need to select "format all+download", click on "Download" and connect the device. The flashing process will start. After it finishes, the device will start again.
You wil notice that you lost your imei number you can add it back by:
Using MTK Engineering Mode (does not requires root)
Open engineering mode » Click on Engineer Mode (MTK) » Swipe left to Connectivity » click on CDS Information » Radio Information
Click on phone 1 if you want to change your sim 1 or choose Phone 2 to change sim 2 IMEI, follow this guide:
For Phone 1: “AT+ EGMR=1,7,â€YOUR NEW IMEI NO†(make sure you add a space in between AT+ & EGMR)
For Phone 2: “AT+ EGMR=1,10,â€YOUR NEW IMEI NO†(make sure you add a space in between AT+ & EGMR)
Using Chamelephon (requires root, but much more easier)
Just copy the IMEIS from the phone's box and put them into the app.
hope this is helpful
Click to expand...
Click to collapse
I'll keep updating the info!
Really complete, I could unlock my M2 Note and install CM-12.1 ! Thanks !
Moyster said:
Really complete, I could unlock my M2 Note and install CM-12.1 ! Thanks !
Click to expand...
Click to collapse
Moyster xDD :laugh::laugh: Thanks to you, without you this wouldn't have been possible
Pretty much covered all, just state the Armv7 Android level API 21 64bit, 5.1 Micro or Nano for gapps. They might get confused on what to choose.
Xtian Rey said:
Pretty much covered all, just state the Armv7 Android level API 21 64bit, 5.1 Micro or Nano for gapps. They might get confused on what to choose.
Click to expand...
Click to collapse
Very true, thanks a lot. I introduced the platform and the Android version of GApps
Thanks nice guide... Very useful for everyone who want play and modified the M2 note.
"This unlocking guide only works for M571 model. If you try this with a M571C (China Telecom) model, you'll get a bricked phone (very useful if you like paperweights*)"
I Am Using M571C, But Everything Fine.
Sent from my M2 Note using XDA Forums Pro.
Mr0oHo0 said:
"This unlocking guide only works for M571 model. If you try this with a M571C (China Telecom) model, you'll get a bricked phone (very useful if you like paperweights*)"
I Am Using M571C, But Everything Fine.
Sent from my M2 Note using XDA Forums Pro.
Click to expand...
Click to collapse
I include this on the guide. I read it bricked the phone in several cases, but I'm glad yours didn't.
Thanks for your guideline , it helps a lot !
Great work lol
Another thing is…ShevT's recovery has no problem in cache partition.Only my broken recovery did… So remove the cache fixing partAny problem just send me a private message. I'll check when i have time.
---------- Post added at 04:00 PM ---------- Previous post was at 03:58 PM ----------
And Meizu M571C should use the same method of meizu m2 (mini), a shell script for frp unlock. But no recovery images yet…Different hardware and partitions…
Another thing is, Kingroot is not suggested. It cannot be detected by Flashfire and some other tools. And cannot be replaced by SuperSU. So Kingo Root+SuperSU might be better.
aaawqw said:
Great work lol
Another thing is…ShevT's recovery has no problem in cache partition.Only my broken recovery did… So remove the cache fixing partAny problem just send me a private message. I'll check when i have time.
---------- Post added at 04:00 PM ---------- Previous post was at 03:58 PM ----------
And Meizu M571C shoukd use the same method of meizu m2 (mini), a shell script for frp unlock. But no recovery images yet…Different hardware and partitions…
Click to expand...
Click to collapse
https://github.com/Moyster/android_device_meizu_m2note/blob/cm-12.1/BoardConfig.mk#L10
Line 10 to 15 you have the partitions size
Code:
$ cat /proc/partinfo
example :
Name------------Start-------------Size
recovery 0x0000000004840000 0x0000000001400000
Take the Size value : "0x0000000001400000" => hexadecimal to decimal => 20971520 = recovery partition size
PS: I don't think the hardware is "that" different, at least, the kernel meizu released should contain both phone models/drivers
This unlocking guide only works for M571 model.
Click to expand...
Click to collapse
Mine is M571H, can I proceed?
Qeemi said:
This unlocking guide only works for M571 model.
Mine is M571H, can I proceed?
Click to expand...
Click to collapse
Mine too and it worked. I can't assure you anything, but I think that the problem are m571C which are different. Good luck if you're going to give it a try!
Moyster said:
https://github.com/Moyster/android_device_meizu_m2note/blob/cm-12.1/BoardConfig.mk#L10
Line 10 to 15 you have the partitions size
Code:
$ cat /proc/partinfo
example :
Name------------Start-------------Size
recovery 0x0000000004840000 0x0000000001400000
Take the Size value : "0x0000000001400000" => hexadecimal to decimal => 20971520 = recovery partition size
PS: I don't think the hardware is "that" different, at least, the kernel meizu released should contain both phone models/drivers
Click to expand...
Click to collapse
See it. I'll give a try on m2 note(M571C, China Telecom). At least try to build twrp But seems my pc's hdd is not enough No space for source code
little problems.
bootloader unlocking and twrp and roms works very well..
1. OTG is working for me.. :good:
2. unfortunately my phone is not detected by PC..
(show USB is not connected, USB debugging is not accessible..)
3. little bit lag here and there..
4. wifi works well :good:
Need more optimization.. Expecting lot more from you
thankyou very much for this :good:
DOUBT : so bootloader is unlocked, now it is possible to make good MM and N based CM roms ?
dinkan01 said:
bootloader unlocking and twrp and roms works very well..
1. OTG is working for me.. :good:
2. unfortunately my phone is not detected by PC..
(show USB is not connected, USB debugging is not accessible..)
3. little bit lag here and there..
4. wifi works well :good:
Need more optimization.. Expecting lot more from you
thankyou very much for this :good:
DOUBT : so bootloader is unlocked, now it is possible to make good MM and N based CM roms ?
Click to expand...
Click to collapse
hi,which build of cm 12 you put in phone?
M571U
I have the Meizu M571U Model. Can I do this or will it be bricked?
Thank you very much
venturaj said:
I have the Meizu M571U Model. Can I do this or will it be bricked?
Thank you very much
Click to expand...
Click to collapse
It won't, the only problematic model is the M571C, have fun
LBA97 said:
It won't, the only problematic model is the M571C, have fun
Click to expand...
Click to collapse
How can I check which model my m2 note is..?
[email protected] said:
How can I check which model my m2 note is..?
Click to expand...
Click to collapse
Check the store page you bought it from. If you bought it from China, then probably it's a M571C. Good luck
HOW TO ROOT YOUR XIAOMI REDMI NOTE 4X MTK aka NIKEL
DISCLAIMER:
There might be more than 1 way to root this phone, this tutorial is based off of the procedure I used to root my phone. For your device's safety do not mix resources (downloads) from other threads with this thread. I first rooted when my phone was on MIUI 8.2 and Android 6.0.1 (It still works on higher versions of the software). Before continuing with the procedure, you are responsible for your phone and what you do to it, this thread worked for me but doesn't necessarily mean it will work for you as well if you don't follow the steps correctly or use different files. Nonetheless, I take no responsibility for what happens to your phone if anything goes wrong.
Requirements:Unlocked Bootloader (Click here for the procedure)
Custom Recovery "TWRP" (Click here to download)
ABD Drivers (Click here to download)
SuperSU (Click here to download)
(Download the latest .zip file called "Recovery Flashable" NOT any APK's)
Procedure:
1) Unlock your Bootloader (skip if already unlocked)
2) Download all the required files
3) Install the ADB Drivers
4) Move the downloaded SuperSU zip file to your phone's SD CARD or internal memory
5) Open the .bat file inside the NIKEL FLASHKIT folder
- Οnce the batch opens select the first option (FLASH ZCX-TWRP 3.0.2-X FOR Redmi Note 4 MTK)
6) Enable USB Debugging
- Enable developer options by clicking couple of times on the MIUI Version (Settings > About Phone)
- After you've enabled the developer options, go to additional settings and find "developer options"
- Enable USB Debugging
7) Connect your phone to your PC
8) Follow the instructions being printed on the NIKEL FLASHKIT batch file you've previously opened
9) After your phone has entered TWRP go to Install and find the .zip of SuperSU
10) Select the file then swipe to install and reboot, DONE!
norskaa said:
Hello everyone, I recently purchased a Xiaomi Redmi Note 4X and I'd like to root it,
Android Version : 6.0 MRA58K
MIUI Version : MIUI Global 8.2 | Stable 82.1.0 (MBFMIDL)
Is there currently any possible / safe way to root this phone? If so, please be kind and link me to a thread. Thanks in advance! <3
Click to expand...
Click to collapse
Well, you need an unlocked bootloader inorder to get root access.
Go apply for permissions if you haven't applied yet!
sachin n said:
Well, you need an unlocked bootloader inorder to get root access.
Go apply for permissions if you haven't applied yet!
Click to expand...
Click to collapse
Hello, thanks for your reply. I've just requested a bootloader unlock. What do I do after that in order to root my phone?
norskaa said:
Hello, thanks for your reply. I've just requested a bootloader unlock. What do I do after that in order to root my phone?
Click to expand...
Click to collapse
Flash the custom recovery (*.img) through fastboot command. For RN4 MTK there's limited custom recovery available, but you may consider trying Cofface TWRP or ZCX TWRP. After that you can install SuperSU or Magisk from custom recovery. There are plenty tutorials of flashing custom recovery and rooting device using TWRP in RN4 MTK device, search this forum or Google.
Devaz01 said:
Flash the custom recovery (*.img) through fastboot command. For RN4 MTK there's limited custom recovery available, but you may consider trying Cofface TWRP or ZCX TWRP. After that you can install SuperSU or Magisk from custom recovery. There are plenty tutorials of flashing custom recovery and rooting device using TWRP in RN4 MTK device, search this forum or Google.
Click to expand...
Click to collapse
Thanks for your reply, I've searched for video tutorials regarding flashing etc. All the videos I've found are about RN4 and NOT RN4X (which I own), does that make any difference?
norskaa said:
Thanks for your reply, I've searched for video tutorials regarding flashing etc. All the videos I've found are about RN4 and NOT RN4X (which I own), does that make any difference?
Click to expand...
Click to collapse
Doesn't matter sir, Xiaomi released 4/64GB MTK variant as wells, I assume you've the same.
Get TWRP for MTK variant of Redmi-note-4 and flash it. Nothing to worry.
sachin n said:
Doesn't matter sir, Xiaomi released 4/64GB MTK variant as wells, I assume you've the same.
Get TWRP for MTK variant of Redmi-note-4 and flash it. Nothing to worry.
Click to expand...
Click to collapse
Thank you so much for all your help! Ill post once I've tried it and successfully flashed my device, so other people with the same device could maybe find help here.
norskaa said:
Thank you so much for all your help! Ill post once I've tried it and successfully flashed my device, so other people with the same device could maybe find help here.
Click to expand...
Click to collapse
So, is it worked?
joppendaro said:
So, is it worked?
Click to expand...
Click to collapse
Yes
mr
mr flash twrp it is alive what mode fastboot
Thanks...
Sir.. Thanks a lot, I completed the whole process to install TWRP and root my redmi note 4x (Nikel) Ram 4GB internal 64 GB but I had to press volume down and power to force fastboot to come up then continue your step doubleclick the .bat file inside the NIKEL FLASHKIT folder...
MIUI Global 8.5 Stable 8530 (MBFMIED)
Yes, sometimes it works with the first try, other times you have to manually enter fast boot, and other you may need to reconnect your USB while in the process. It can be tricky at some point but it eventually works out
i tried few times and it is just not working for me. i dunno what n how... i unlocked bootloader from mi site. and nothing i try seems to work for me.
Kenannp said:
i tried few times and it is just not working for me. i dunno what n how... i unlocked bootloader from mi site. and nothing i try seems to work for me.
Click to expand...
Click to collapse
Could you give a more detailed explanation? Such as telling if you receive any errors , if the prerequisites installed correctly etc.?
norskaa said:
Could you give a more detailed explanation? Such as telling if you receive any errors , if the prerequisites installed correctly etc.?
Click to expand...
Click to collapse
nothing special. just when it says ur in twrp,nothing happens. i kept waiting even 20 mins n nothing.
repeated procedure few times and nothing.
but it worked,i changed usb cable and i went through,which is weird,usb works normal. copy/paste,charging...everything. but i didnt work for flasher.
however changed it and its all ok now
Kenannp said:
nothing special. just when it says ur in twrp,nothing happens. i kept waiting even 20 mins n nothing.
repeated procedure few times and nothing.
but it worked,i changed usb cable and i went through,which is weird,usb works normal. copy/paste,charging...everything. but i didnt work for flasher.
however changed it and its all ok now
Click to expand...
Click to collapse
Well at least the problem is solved now. Even though I think I mentioned in the thread that it might not work at all times and that you may have to disconnect the USB at some point. Anyways , good work
im glad that i found this thread.. sadly when i download the files.. its corrupted.. download several times.. same issue.. pls help.
xda111114 said:
im glad that i found this thread.. sadly when i download the files.. its corrupted.. download several times.. same issue.. pls help.
Click to expand...
Click to collapse
I've reuploaded the resources again. Here you go https://www.dropbox.com/s/52wb2dm1ludtfz8/Xiaomi Root.rar?dl=0
can someone help me. it's not booting into recovery mode. what should i do?
Does it still work in the latest version of MIUI 9.5.1.0? I have successfully installed TWRP but the .zip file might be outdated.
Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You
MIUI 9 For A610 Plus
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]
Rajevpmavoor said:
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]
Click to expand...
Click to collapse
Although the rom is bugless but, unfortunately VOLTE didn't work.
MIUI 9 For A610 Plus
Did you flash this new MIUI 9 ROM , I think it has volte and it is in Android M.
Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
does it boot into meta mode on pressing volume down+power button??( bcoz my fone boots into meta mode on doing so)
and how to go into bootloader?
while using sp flash tool i power off the fone and then connect it to sp flash tool via usb cable ...fone gets detected and but download for twrp doesnt occur ..it says PMT changed for the rom, select format all+ download ....
but i didnt do format all coz i dont have flashable stock rom...
I lost my IMEI after flash ROM, not able to retrieve IMEI
Issue in camera & Finger Lock
Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
I have checked both ROM, Miui ROM camera is look like .02MB, No VOLTE, Finger Print lock is not working
Thanks. I have messed up anyway...
Anybody have a complete Readback (Using SP-Flash Tools) copy of (volte) rom?
I lost Imei, From the given NVram.bin, Could not edit Imei using BPGL.... pull as Maui Meta and SN writer can not do this with present update.
I need to revert back. please help with ROM copy and NVRAM Edit.
Alfonso Osnofla said:
Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You
Click to expand...
Click to collapse
Just try http://www.ztedevice.com/support/detail?id=FE22BEF5C33D4A17BCDA20AAE2631951 ( http://download.ztedevice.com/support/product/569/201802111051594/sd/20180211105554767.zip )
sd card update using twrp.
But first remove the first line from update script file located inside the zip.
Just reply.
Need MIUI rom
Heyy plz gime me teh rom for zte blade A2 plus i really need a miui rom for zte blade A2 plus...
Help I'm confused.
Reading the comments i got to know that many people lost their IMEI and VOLTE , I want to root the device So can anyone tell me when does this problem occur (loosing volte and imei) during rooting or while flashing a custom rom?
kingksath said:
I lost my IMEI after flash ROM, not able to retrieve IMEI
Click to expand...
Click to collapse
Did you loose your IMEI on rooting or while flashing any custom Rom?
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
What is it for?
Is it for volte?
vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
Is this an update to the Stock Rom?
hi, can u help me please, iam tryin to update with twrp , i did remove first line from script but i have error.
Found a way to unlock bands on MTK based phones by flashing basebands from phones with the same chipset. Doing this by using SPFLASH and flashing md1 files. Still unable to connect to cell network on my Doogee bl12000. Flashed this phones MD1, was wondering if anybody could provide me with the nvdata and nvram from the ZTE blase a2 plus. Hoping by flashing those files can connect to a U.S. network.