Related
i had to find out if it will work followed this guide (https://www.xda-developers.com/flash-generic-system-image-project-treble-device) and it booted will try other project treble roms and report back here also eveything worked i didnt have a apk crash or force close the little time i used it also the camera apk worked great not as good as stock but not as bad as rros:laugh::laugh::laugh::laugh:
You flashed RR ph Treble or Lineage 15.1. How's the battery ? SOT? Does it support VOLTE?
Please Report
Honor 7x project treble
I flashed the Resurrection Remix phh-Treble and the LineageOS 15.1 phh-Treble will try the third and report back so far the battery life is normal haven't notice any abnormal drain and I can't confirm about the volte
dcraffam said:
i had to find out if it will work followed this guide (https://www.xda-developers.com/flash-generic-system-image-project-treble-device) and it booted will try other project treble roms and report back here also eveything worked i didnt have a apk crash or force close the little time i used it also the camera apk worked great not as good as stock but not as bad as rros:laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
Hi Dude, After seeing your message, I tried this on the Honor 7X BND AL10 with EMUI 8 (Manually updated) with the Lineage OS (ARM 64 A-ONLY DEVICE) using the fastboot method. I wiped everything including system and I tried with both stock recovery installed and Twrp recovery installed and I also tried wiping using fastboot "fastboot -w" command. After that I installed using the fastboot and it went well and shows as finished but when I tried to boot, it just doesn't boot at all. I don't even see the lineage OS boot logo or something and eventually it goes to Huawei E recovery.
Could you please tell me which version exactly you flashed like aosp or RR or Lineage and Arm 64 A-only device or AB-device etc... A lot of people would really appreciate that.
Thetpcguy said:
Hi Dude, After seeing your message, I tried this on the Honor 7X BND AL10 with EMUI 8 (Manually updated) with the Lineage OS (ARM 64 A-ONLY DEVICE) using the fastboot method. I wiped everything including system and I tried with both stock recovery installed and Twrp recovery installed and I also tried wiping using fastboot "fastboot -w" command. After that I installed using the fastboot and it went well and shows as finished but when I tried to boot, it just doesn't boot at all. I don't even see the lineage OS boot logo or something and eventually it goes to Huawei E recovery.
Could you please tell me which version exactly you flashed like aosp or RR or Lineage and Arm 64 A-only device or AB-device etc... A lot of people would really appreciate that.
Click to expand...
Click to collapse
im going to write a quick lil guide on how im doing this for you right now
.................................................HOW TO FLASH GSI ON HONOR 7X ................................
DO SO AT OWN RISK I HOLD NO LIABLILTY
LETS BEGIN
1 you must be on stock emui 8 you must not have a pin set or device encrypted or frp lock and boot loader must be unlocked
2 download one of the 3 images listed here ( https://www.xda-developers.com/flash-generic-system-image-project-treble-device/ )
( i personally only tried the ( LineageOS 15.1 phh-Treble Thread) and the (Resurrection Remix phh-Treble Thread) ((((((download the a only arm64image))))))))
3 download the 8.1 pico gaapps package for arm64 found here ( http://opengapps.org/ )
4 now you must download this twrp i know it works from the honor 7x oreo twrp ill upload it or you can download it from the thread
5 flash the twrp twrp_ramdisk_oreo_7-4-18.img linked in fastboot then reboot recovery (note) there will be two recoverys i upload one needed to flash the (gsi) and the other twrpimgmount_ramdisk.img is used to flash (((twrp backup)) to go back to stock oreo as the first one wont boot once the (gsi) is flashed only the mount twrp.img will the( twrp_ramdisk_oreo_7-4-18.img) will boot with the stock emui beta for some reason
6 create full backup with the twrp_ramdisk_oreo_7-4-18.img flashed in step 5 (personally i backed up everything i could )
7 factory reset data using twrp
8 flash the (gsi) image u downloaded in step 2 to system image .......... tap install change the type from zip to image select the (gsi) and flash to system image partion
9 flash pico gapps 8.1 arm 64 ( the rest are to big o flash ))
reboot device tada you booted a stock (gsi)
i couldnt upload recoveries but they can be found here https://forum.xda-developers.com/devdb/project/?id=25826#downloads
to go back to stock emui fastboot recovery flash the twrpimgmount.img factory reset and restore backup some partions will fail like bdm image,, data,, the partions that do uncheck those and restore backup agin flash stock recovery (RECOVERY_RAMDIS.img) and factory reset and you will be on emui8 agin
let me know if you have any problems im going t ry the phh treble aosp (gsi) now
Thetpcguy said:
Hi Dude, After seeing your message, I tried this on the Honor 7X BND AL10 with EMUI 8 (Manually updated) with the Lineage OS (ARM 64 A-ONLY DEVICE) using the fastboot method. I wiped everything including system and I tried with both stock recovery installed and Twrp recovery installed and I also tried wiping using fastboot "fastboot -w" command. After that I installed using the fastboot and it went well and shows as finished but when I tried to boot, it just doesn't boot at all. I don't even see the lineage OS boot logo or something and eventually it goes to Huawei E recovery.
Could you please tell me which version exactly you flashed like aosp or RR or Lineage and Arm 64 A-only device or AB-device etc... A lot of people would really appreciate that.
Click to expand...
Click to collapse
Try Flashing AOSP 8.1 ARM64 A-Only device system.img as its more updated than lineage or RROS.
Only, A-Only system.img should work on our device as per treble wiki on github.
TrainerRed said:
Try Flashing AOSP 8.1 ARM64 A-Only device system.img as its more updated than lineage or RROS.
Only, A-Only system.img should work on our device as per treble wiki on github.
Click to expand...
Click to collapse
Hi, I already flashed the AOSP version and it's booted up and working fine but I wanted the lineageOS as it has all the built in customisations. I just don't know why the lineage os didn't work as it was reported above the it's working. Maybe it's the variant thing? I have BND AL-10. I don't know Anyway thanks!!
Thetpcguy said:
Hi, I already flashed the AOSP version and it's booted up and working fine but I wanted the lineageOS as it has all the built in customisations. I just don't know why the lineage os didn't work as it was reported above the it's working. Maybe it's the variant thing? I have BND AL-10. I don't know Anyway thanks!!
Click to expand...
Click to collapse
How is the rom ? Is it can be used as daily driver ?
You still using AOSP or back to EMUI already ?
If you don't mind can you write review of Whats working and Whats Not?
TrainerRed said:
How is the rom ? Is it can be used as daily driver ?
You still using AOSP or back to EMUI already ?
If you don't mind can you write review of Whats working and Whats Not?
Click to expand...
Click to collapse
I installed it without any gapps or anything just bare minimum just to see if it boots or not. Here is what I observed during my short stay:laugh:
1. There is no VOLTE
2. The camera is working
3. I can't talk much about battery but there is no crazy drain as such so yeah
4. I don't know why you said it's the latest but the security patch is the same based on March, 2018 and it's android 8.1
5. The launcher seemed like the ice cream sandwich (Took me back to good ol days)
6. It felt smooth and unusual lag
I can't say much and suggest whether or not you can use it as a daily driver when I never used it as a daily driver. It's your call.
Hit the "Thanks" button if you really feel like thanking me:good:
dcraffam said:
.................................................HOW TO FLASH GSI ON HONOR 7X ................................
DO SO AT OWN RISK I HOLD NO LIABLILTY
LETS BEGIN
1 you must be on stock emui 8 you must not have a pin set or device encrypted or frp lock and boot loader must be unlocked
2 download one of the 3 images listed here ( https://www.xda-developers.com/flash-generic-system-image-project-treble-device/ )
( i personally only tried the ( LineageOS 15.1 phh-Treble Thread) and the (Resurrection Remix phh-Treble Thread) ((((((download the a only arm64image))))))))
3 download the 8.1 pico gaapps package for arm64 found here ( http://opengapps.org/ )
4 now you must download this twrp i know it works from the honor 7x oreo twrp ill upload it or you can download it from the thread
5 flash the twrp twrp_ramdisk_oreo_7-4-18.img linked in fastboot then reboot recovery (note) there will be two recoverys i upload one needed to flash the (gsi) and the other twrpimgmount_ramdisk.img is used to flash (((twrp backup)) to go back to stock oreo as the first one wont boot once the (gsi) is flashed only the mount twrp.img will the( twrp_ramdisk_oreo_7-4-18.img) will boot with the stock emui beta for some reason
6 create full backup with the twrp_ramdisk_oreo_7-4-18.img flashed in step 5 (personally i backed up everything i could )
7 factory reset data using twrp
8 flash the (gsi) image u downloaded in step 2 to system image .......... tap install change the type from zip to image select the (gsi) and flash to system image partion
9 flash pico gapps 8.1 arm 64 ( the rest are to big o flash ))
reboot device tada you booted a stock (gsi)
i couldnt upload recoveries but they can be found here https://forum.xda-developers.com/devdb/project/?id=25826#downloads
to go back to stock emui fastboot recovery flash the twrpimgmount.img factory reset and restore backup some partions will fail like bdm image,, data,, the partions that do uncheck those and restore backup agin flash stock recovery (RECOVERY_RAMDIS.img) and factory reset and you will be on emui8 agin
let me know if you have any problems im going t ry the phh treble aosp (gsi) now
Click to expand...
Click to collapse
Thanks for your detailed steps you documented.
But I did much simpiler. (but i did not flash gapps- so that would need to add some steps)
1. starting from stock EmUI 8 with stock recovery
2. Reboot to recovery perform factory reset.
3. when reset is done, while still in recovery plug in usb to phone and pc
4. select reboot, When screen goes off press and hold volume down. You will boot to fastboot
5. fastboot flash system C:\Users\Mr\Downloads\system-arm64-aonly.img
(your path to file will be different, unless you are also user "mr")
To return to stock do same steps but point fastboot flash to the stock emui system.img
Huawei camera works?
Which will you think better? Aosp lineages rr?
Thx
I tried flashing treble and lineage from twrp but neither worked on my bnd-l24. After flashing it just boots to the fastboot screen.
eskimowarrior7 said:
I tried flashing treble and lineage from twrp but neither worked on my bnd-l24. After flashing it just boots to the fastboot screen.
Click to expand...
Click to collapse
I have flashed to L24-- PHH RRos. It worked ok, gave a verdor image miss-match error.
did you factory reset before booting,
mrmazak said:
I have flashed to L24-- PHH RRos. It worked ok, gave a verdor image miss-match error.
did you factory reset before booting,
Click to expand...
Click to collapse
Yes, even tried the process a few more times. No luck.
eskimowarrior7 said:
Yes, even tried the process a few more times. No luck.
Click to expand...
Click to collapse
each time I started with flash stock recovery, then did factory reset
then from recovery reboot directly to fastboot
and fastboot flash system
mrmazak said:
Thanks for your detailed steps you documented.
But I did much simpiler. (but i did not flash gapps- so that would need to add some steps)
1. starting from stock EmUI 8 with stock recovery
2. Reboot to recovery perform factory reset.
3. when reset is done, while still in recovery plug in usb to phone and pc
4. select reboot, When screen goes off press and hold volume down. You will boot to fastboot
5. fastboot flash system C:\Users\Mr\Downloads\system-arm64-aonly.img
(your path to file will be different, unless you are also user "mr")
To return to stock do same steps but point fastboot flash to the stock emui system.img
Click to expand...
Click to collapse
Hi, Could you tell me which model and variant of Honor 7x you are using. I tried this on BND AL10 and it doesn't boot with all the stuff above. However, I could boot into AOSP GSI.
For BND AL10 users, Only the AOSP GSI is working but both the RR and the Lineage are not working. I tried all three with same method.
1. Wiped/ Factory reset
2. Installed using "fastboot flash system system.img"
I posted this message because I wasted a lot of time & data LOL so maybe this would be helpful to others. However, if somehow you manage to do it on AL10, please post it here.
Thetpcguy said:
Hi, Could you tell me which model and variant of Honor 7x you are using. I tried this on BND AL10 and it doesn't boot with all the stuff above. However, I could boot into AOSP GSI.
Click to expand...
Click to collapse
I'm using the L24
Thetpcguy said:
For BND AL10 users, Only the AOSP GSI is working but both the RR and the Lineage are not working. I tried all three with same method.
1. Wiped/ Factory reset
2. Installed using "fastboot flash system system.img"
I posted this message because I wasted a lot of time & data LOL so maybe this would be helpful to others. However, if somehow you manage to do it on AL10, please post it here.
Click to expand...
Click to collapse
Any updates if I can use it as my daily driver?
Create a vendor partition for cancro to flash a PT GSI IMAGE
This guide only suitable for MI4LTE and MI3W.
MI3TD don‘t support this method and ROM.
First we must thanks to the MkfsSion for his PT works on our MI4LTE.
https://github.com/MkfsSion/android_device_xiaomi_cancro
And thanks to the cjybyjk for his automatic treblizer tools.
https://github.com/cjybyjk/cancro_treblizer
Warning: this operation is highly experimental and may result in a serious risk of irreversibility
Method 1 With cjybyjk's cancro_treblizer.(Recommend this method now)
1.Let MI4LTE to fastboot mode.
We can press Volume - and Power button to let it into fastboot mode.
2.Let flash the TWRP which support ProjectTreble.
We can use the command [fastboot flash recovery x.img]
Recovery:https://drive.google.com/file/d/1Fc0SK_xYdmkFi5CzR4Vq8QLqQFQ1ikWk/view?usp=sharing
3.Let reboot into the TWRP and flash the cancro_treblizer.zip in TWRP and reboot into the TWRP again when finished.
https://drive.google.com/file/d/14EkMX9VKiC3kbELwtBkxmAYupCmCxPf5/view?usp=sharing
4.Mount the Cache System and Vendor partition and Wipe this 3 partitions.
5.Then we can flash the zip rom from the AFH below.
https://www.androidfilehost.com/?fid=11410932744536984188
6.If you flash the pie gsi arm rom and you must flash this omx-disable patch to fix the boot for pie.
https://drive.google.com/file/d/19TUZiX0vHxIlc9f_6wF2uySI8HcW7xqy/view?usp=sharing
7.Now you can use the nice ProjectTreble ROM on our MI4LTE!
Method 2 With 9008 mode and Diskgenius.(Not recommend now)
1.Let MI4LTE to fastboot mode.
We can press Volume - and Power button to let it into fastboot mode.
2.Let MI4LTE to disk mode(9008 mode).
Open the "磁盘模式工具.rar" ,Unzip it and double click the "清除fastboot进磁盘操作.bat" when MI4LTE go to black screen it was succeeded into disk mode.
Disk Mode Tools:https://drive.google.com/file/d/12uFsjwB_t_XzBWz0aeVJue5zdPiPCc7c/view?usp=sharing
3.Download the DiskGenius Software from the website:
http://www.diskgenius.com/
4.Open the DiskGenius and you will find all the MI4LTE partition in it and we need to restore aboot partition.
aboot partition file:https://drive.google.com/file/d/1aYikwwQQdAsa_XM7cKqv2f49aYAMNybu/view?usp=sharing
5.Then we need to restore ProjectTreble partition table.(For 16GB Version Only)
ProjectTreble partition table file:https://drive.google.com/file/d/1Zg_htr9tSfUHqr04pdxlCyn_qANnwJlM/view?usp=sharing
6.Then we can reboot the MI4LTE into the fastboot mode again and flash the TWRP which support ProjectTreble.
We can use the command fastboot flash recovery x.img
Recovery:https://drive.google.com/file/d/1Y-67W1MfMchny6ljCxKpU1_vq-PdLkpV/view?usp=sharing
7.Press Volume + and Power button to go into the TWRP.
8.Mount the Cache System and Vendor partition and Wipe this 3 partitions.
9.Then we can flash the zip rom from the AFH below.
https://androidfilehost.com/?fid=3700668719832236822
10.Now you can use the nice ProjectTreble ROM on our MI4LTE!
Now our MI4LTE is not ARM64 device so we can only flash A-Only and ARM GSI IMAGE.
Update 2018-08-21
Phh have just released the Android 9.0 GSI IMAGE have include ARM and ARM64 so our cancro can flash Android 9.0 GSI IMAGE for experience.
https://forum.xda-developers.com/pr...vice-development/aosp-9-0-phh-treble-t3831915
Update 2018-10-20
Fix App FC
Fix OMX
Fix GPS
Noteie PT GSI may need extra patch when you flash the pie gsi image with this pt package.
Cancro Rom Group
Group rules:
1.English only.(You can use the translator to communicate.)
2.Respect developers and administrators.
3. Please do not send spam.
4. Do not send stickers continuously.
Channel: @cancrorom
CN Group: @cancrogroup
https://t.me/micancro
前排支持
Supported ahead.
wow nice treble for our cancro,
is internal storage formatted or not?
Thanks for new thread.
小米MIX标准版4GB128GB银色MIUI10中国开发者8.8.8.
Shiroyasha21 said:
wow nice treble for our cancro,
is internal storage formatted or not?
Click to expand...
Click to collapse
It's no problem to wipe internal storage but when you wipe this you must reboot into Recovery again to copy zip rom to internal storage.
Changed files to Google Driver instead of BaiduYun Disk.
Mi3 not supported(
酷安基佬前来支持:laugh:
酷安基佬来一波??
Sent from my Essential Products PH-1 using XDA Labs
酷安前来支持！
Come from Coolapk.
Supported ahead( 前排吃瓜）
Guy from Coolapk
请问恢复Treble分区那一步，具体是哪个分区？之前没弄Treble，网上搜了一下好像也没有Treble的包，那个GitHub项目好像并不是个可刷的包。抱歉不是太懂，不好意思
All of you, please use English.
Also please tell whether Mi 3 will be supported in future or not?
Thanks.
ptg251294 said:
All of you, please use English.
Also please tell whether Mi 3 will be supported in future or not?
Thanks.
Click to expand...
Click to collapse
Mi3 TD Pisces (old Tegra CPU phone) not supported.
Mi3 W Cancro I've tried a minutes ago, and removing aboot, repartitioning, install new trebled twrp, and install LOS completed successfully @gujiangjiang
小米MIX标准版4GB128GB银色MIUI10中国开发者8.8.8.
JulianJenner said:
Mi3 TD Pisces (old Tegra CPU phone) not supported.
Mi3 W Cancro I've tried a minutes ago, and removing aboot, repartitioning, install new trebled twrp, and install LOS completed successfully @gujiangjiang
小米MIX标准版4GB128GB银色MIUI10中国开发者8.8.8.
Click to expand...
Click to collapse
Thanks for your testing.
Have you guys only tried Lineage? Every GSI rom should work, right?
mdki1996 said:
Have you guys only tried Lineage? Every GSI rom should work, right?
Click to expand...
Click to collapse
I also tried AOSP GSI and works fine yet.
When you flashed PT successed and you can flash the all the GSI IMAGE by your self.
Now the Android P ProjectTreble image have not released yet so we can use aosp,aex,Los first to use now and wait the p image release by phh and if phh released the image for arm then we can easily flash it with PT.
Here are the rom lists for arm32 pt devices and you can try these pt rom now.
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
https://forum.xda-developers.com/pr...device-development/rom-aosp-extended-t3821934
https://forum.xda-developers.com/pr...evice-development/rom-carbonrom-noct-t3821947
https://forum.xda-developers.com/pr...evice-development/lineage-phh-treble-t3767690
https://forum.xda-developers.com/pr...pment/gsi-resurrection-remix-o-6-1-0-t3811299
https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
https://forum.xda-developers.com/pr...official-treble-enabled-resurrection-t3761279
https://drive.google.com/folderview?id=1SsPuw3ZtTvoslJyqwSJsmDQ42qvJvYVN
Here is the guide to teach how to flash gsi image with pt support.
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
NOTE:
PLEASE FLASH ARM OR ARM32 GSI IMAGE NOT ARM64.
gujiangjiang said:
I also tried AOSP GSI and works fine yet.
When you flashed PT successed and you can flash the all the GSI IMAGE by your self.
Now the Android P ProjectTreble image have not released yet so we can use aosp,aex,Los first to use now and wait the p image release by phh and if phh released the image for arm then we can easily flash it with PT.
Here are the rom lists for arm32 pt devices and you can try these pt rom now.
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
https://forum.xda-developers.com/pr...device-development/rom-aosp-extended-t3821934
https://forum.xda-developers.com/pr...evice-development/rom-carbonrom-noct-t3821947
https://forum.xda-developers.com/pr...evice-development/lineage-phh-treble-t3767690
https://forum.xda-developers.com/pr...pment/gsi-resurrection-remix-o-6-1-0-t3811299
https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
https://forum.xda-developers.com/pr...official-treble-enabled-resurrection-t3761279
https://drive.google.com/folderview?id=1SsPuw3ZtTvoslJyqwSJsmDQ42qvJvYVN
Here is the guide to teach how to flash gsi image with pt support.
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
NOTE:
PLEASE FLASH ARM OR ARM32 GSI IMAGE NOT ARM64.
Click to expand...
Click to collapse
i try other GSI image,Aospe extended,DU,Aosp 8.1, but doesn't boot.reboot phone going fastboot mode
Haggiskop said:
i try other GSI image,Aospe extended,DU,Aosp 8.1, but doesn't boot.reboot phone going fastboot mode
Click to expand...
Click to collapse
I tried without problem.
Please confirm you have flash the pt support.
Then please confirm you download the right arm GAO image and use image flash method flash it not zip rom.
从我的 iPhone 发送，使用 Tapatalk
gujiangjiang said:
I tried without problem.
Please confirm you have flash the pt support.
Then please confirm you download the right arm GAO image and use image flash method flash it not zip rom.
从我的 iPhone 发送，使用 Tapatalk
Click to expand...
Click to collapse
i flash with twrp and without twrp fastboot mode but doesnt boot.arm a only version.lineage 15.1 cancro.zip
work only.
What is this?
- sGSI of ZUI 10.0/ 5.0 from Lenovo Z5pro/Z5, based on Android 8.1.0, June 1,2018 security patch.
Since this was requested in some comments, I flashed it and found working for our device flawlessly, with some bugs.
Features?
-All features of ZUI 4 + Soft Charge, gestures, multi space ( dual apps ) etc. Split Screen is also available.
How to flash?
ZUI 10 :
1. Download the flashable zip from the links.
2. Boot to twrp, and wipe dalvik, cache, data, system and vendor.
3. Flash the zip.
4. Reboot.
ZUI 5:
Method 1 : (Recommended)
- 1. Download any treble based 8.1.x rom and ZUI5.0-sGSI.zip (link below).
[Please use MIUI 10 8.11.1 by Narshi Shukla as base ROM, as it seems it's Vendor is most compatible.]
2. Extract the zip in your storage. You will get three files ( two flashable zips and one folder "sGSI.....". [Folder name might differ, there will be only one folder, so no worries])
3. Boot into recovery and take a backup.
4. Clean flash treble based Oreo ROM that you downloaded.
5. From your twrp, use file manager to move " sGSI...." folder to backup folder of Twrp.
6. Mount system and vendor and wipe cache/delvik, data and system.
( Don't wipe firmware and Vendor )
7. Goto restore in your twrp and restore the system from "sGSI....." folder.
8. Flash the remaining two zips.
9. Flash magisk if needed.
10. Wipe cache/delvik and reboot. Done.
Method 2 : https://forum.xda-developers.com/showpost.php?p=78389810&postcount=320
(You need treble based twrp, search if you don't already have).
After following all these steps, if your phone is stuck in Lenovo powered by android screen for long, then force reboot the phone and it will boot up to system.
What works?
-Here:
Call,SMS, VOLTE, Data, play store, Utouch, Fingerprint , Navigation, Double touch to wake, GCAM, Face Unlock, Hotspot, Banking apps, nearly everything.
What doesn't work?
- ROM specific. Bugs depend upon the treble ROM that you used as base. In some ROM, system sounds does not work. In MiUI 10, video recording might not work. Game Mode has some issues with global apps.
*FOR VIDEO RECORDING - see this : https://forum.xda-developers.com/showpost.php?p=78219358&postcount=93 ****
*Update GPU drivers for VULKAN support. Link in the links section.***
Performance?
- Better than ZUI 4, smooth as butter, no stutter playing games like PUBG, notifications on time, decent SOT.
Can it be used as daily driver?
- Yes, if you can live with some Chinese texts in certain apps.
Any other thing?
- Because the ROM is ported from Z5 which has a notch, total area of the notification bar cannot be used. To see things like real time network speed and battery "percentage" you have to pull down the notification bar.
What should I do first after booting the device?
- Install play store from App center. Install magisk to remove bloat wares. Install any music app, since there is none. This will make the system optimal for us.
Also, Turn "True Full Screen Mode" ON in display settings for full screen in Apps.
Install Magisk and download and install "SafteyPatch V2" within Magisk to pass safetynet and hide banking apps in magisk hide to use them.
Open security app and give all important permissions to the apps you use, including system apps. Also include them in autorun/whitelist section.
Links?
-Here
ZUI 10
https://drive.google.com/open?id=17lyWnAl0Kjkv5S89wdtw7HglF2072zP5
ZUI 5
Mega link :
https://mega.nz/#!FyxSiI7Y!iZmmVufR6pipX3mwv_-I3HqI714YAMJN1a2zIysinmc
Gdrive link:
https://drive.google.com/open?id=1F_Ou6x2bj26hhdffw45uo4r9qlJuaDb5
MiUi 10 8.11.1 Narshi Shukla - Full Rom
https://androidfilehost.com/?fid=11410932744536996684
MIUI 10 8.11.1 Narshi Shukla - Vendor for twrp recovery: @(THIS VENDOR isnt compatible with all roms, if facing random reboots, use the complete MIUI 10 ROM for the Gsi)
https://drive.google.com/drive/u/0/folders/15QHEUfLMagMV9jZTmlUHa4hkhkNTF-RC
Working GCAM link :
https://www.celsoazevedo.com/files/android/google-camera/f/MGC_6.1.021_FINAL_V1a_A8.1+.apk
VULKAN enabled open GL 3.2 driver link :
https://drive.google.com/folderview?id=11_atz5CDK9bHG4K_ME2LSRFFnxxKqWw2
Credits:
Not my work, I am just sharing it since I found it working.
All credits goes to this Xiaomi thread and bugrevealingbme.
https://*************/threads/zui-5-0-a-only-treble-rom.226/
******************************** FLASHING ISSUE ******************
While flashing this ROM, try to follow the guide above as strictly as possible. Use the ROM that is recommended.
If you are facing bootloop, download the vendor that is provided and restore it in twrp and then flash patch 1 and 2.
Also remember, during each and every step, your TWRP should have system and Vendor mounted. Check after every step.
Your phone might reboot once or twice during first boot, which is not an issue.
How to know if you flashed it correctly?
-If your phone boots into the system with "Lenovo bootanimation" , you flashed it correctly.
If your phone is stuck in "Lenovo - powered by android" splash image for more than 5 minutes, you got something wrong.
*********************************************************************
Screenshots attached :
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
I have one question. If i install a sgsi rom can i back to trenle, non-treble rom just with a simple flash method?
muujeeb said:
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
Click to expand...
Click to collapse
gcamera is working on redmi note 5 pro. should work also here.
muujeeb said:
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
Click to expand...
Click to collapse
GCAM is working.
Notification bug is not there. Only sometimes, it seems that we get late notification.
You have to flash it over Oreo because the GSI is Oreo based. Flashing over pie should work as well, since treble ROM is required. Take a backup of your system so you can restore easily, if you face any issue.
nonamesry said:
I have one question. If i install a sgsi rom can i back to trenle, non-treble rom just with a simple flash method?
Click to expand...
Click to collapse
Yes, you can get back to the ROM you want with simple flash, no problem.
Custom kernel flashable?
ashwinonm said:
Custom kernel flashable?
Click to expand...
Click to collapse
Haven't tested, but should be flashable.
Edit : Custom kernel might brick the device. Will test and update.
Donot flash custom kernel, it causes self restart of device.
Note: Moxie kernels can be flashed, you should flash patch2 after flashing kernels. But, MIUI 10 comes with moxie R5.1 so no use flashing Moxie again.
link not working
Wow it's so beautiful!
I used Arrow OS 8.1 but it got stuck in bootloop and does'nt boot at all.. I followed all the steps accordingly but it did not boot up even after i kept my phone overnight to let it boot. I don't know where i did wrong.
muujeeb said:
I used Arrow OS 8.1 but it got stuck in bootloop and does'nt boot at all.. I followed all the steps accordingly but it did not boot up even after i kept my phone overnight to let it boot. I don't know where i did wrong.
Click to expand...
Click to collapse
Use MIUI 10 port of Narshi Shukla latest build. It works.
May be Arrow OS cannot be used.
You can also try using Vendor of MIUI 10 once. Restore this vendor and the system image of ZUI.
Here is the vendor:
https://drive.google.com/drive/mobile/folders/15QHEUfLMagMV9jZTmlUHa4hkhkNTF-RC?usp=drive_open
kany1 said:
link not working
Click to expand...
Click to collapse
Link is working fine.
jebish7 said:
Link is working fine.
Click to expand...
Click to collapse
yes it is working with mega app
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
---------- Post added at 01:19 PM ---------- Previous post was at 01:13 PM ----------
ok i try to flash it again and boot successflly
marclevine said:
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
Click to expand...
Click to collapse
I think only MIUI 10 rom works flawlessly for this GSI. I will update the main page details and ask to use MIUI 10 only.
You couldnot flash patch 2 because it requires vendor, and may be your vendor is now messed up.
So use MIUI 10 port, it works without any issue.
marclevine said:
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
---------- Post added at 01:19 PM ---------- Previous post was at 01:13 PM ----------
ok i try to flash it again and boot successflly
Click to expand...
Click to collapse
Glad To hear.
So in whatever rom I am in Oreo , I can use that firmware if I use vendor only from your backup? And shouldn't wipe it?
ashwinonm said:
So in whatever rom I am in Oreo , I can use that firmware if I use vendor only from your backup? And shouldn't wipe it?
Click to expand...
Click to collapse
Well, that's how some people got this working, so yes, it's working that way as well. ( Your ROM should be treble based though )
I will attach the "Vendor" file in the main post as well, so other members can use it too.
custom kernel possible,mine running in moxie
** Post updated on 01/10/19 to include AOSiP GSI **
After trying out a lot of Android 10 GSIs, I have managed to get Lineage OS 17 and AOSiP GSI builds by Erfan to run on Mi Max 3. Thanks to the Dev erfanoabdi and his team who have worked on these.
On Mi Max 3 they are very smooth when they are working. However, certain apps can trigger freezing episodes or forced reboots. AOSiP seems smoother and more stable for now. Both are almost stock with no customization. Over all they are still buggy, just usable, and not reliable.
I am not a developer! Try at your own risk!!
** PLEASE NOTE: You would need to be on one of the AOSP- or LOS-based custom Pie Roms with firmware version 9.9.3 (as base) before flashing this rom. Havoc and AEX have been confirmed to work**
Here are the steps
What you would need:
1. GSI Android 10 Rom:
a. Lineage 17 GSI by Erfan: lineage-17.0-Aonly-10-20190909-ErfanGSI.img.7z
b. AOSiP
2. Permissiver_v4.zip
3. FixZygote_v2.zip
4.open_gapps-arm64-10.0-nano-20190920-UNOFFICIAL.zip
5. Magisk 19.4
6. Any file extractor app. I used ZArchiver from Play store.
Installation Steps.:
1. Extract system image from Android 10 GSI zipped file using app of your choice (ZArchiver in my case)
2. Boot into your recovery (I used Nijel's TWRP 3.2.3-3 and 3.2.3-4)
3. Back up your current ROM
4. Wipe data, system, art/davlik and cache
5. Tap install. Then tap ''Image''. Then select the (extracted) Lineage-17 system image, then tap System. Swipe to install.
6. Install Permissiver_v4 zip file.
7. Install FixZygote_V2 zip file
8. Install Magisk 19.4 zip file.
9. Boot into system. Tap ''OK'' on the screen pop up.
10. Reboot into TWRP.
11. Install OpenGaps.
13. Reboot system and set up your phone.
14. Reboot phone and start using.
What works
1. Mobile data, Wifi and bluetooth
2. Phone calls and messaging including dual sim
3. Playstore
4. Rooting with Magisk
5. Finger print reader
6. Gestures are amazing. Dark mode great!
Bugs
1. Stock camera and torch light do not work.
2. Slider does not control brightness
3. Chrome browser freezes. . Firefox and Via browser running smoothly.
4. Camera and video apps force-close or cause random reboots
Where are the links to the packages and why you install two different gapps (Bitgapps&Opengapps)???
L_e_x_t_e_r said:
Where are the links to the packages and why you install two different gapps (Bitgapps&Opengapps)???
Click to expand...
Click to collapse
There are no links to the packages as I wasn't certain of the XDA rules on links to other websites. Just google them and they are easy to find.
I tried just open gapps or just BitGaps and didn't work. Flashing BitGaps first appeared to point the Open Gapps to the right partition, and that worked.
Thanks for posting but very confusing without links. I know what mean about the rules but you can link the page for the GSI not the download etc
shingers5 said:
Thanks for posting but very confusing without links. I know what mean about the rules but you can link the page for the GSI not the download etc
Click to expand...
Click to collapse
I understand.
Thanks to the Nesh Patel at Tweakguy for the links.
My thanks to the devs who have worked on these.
Here are the links:
For Lineage GSI: https://github.com/resk84/releases/...ineage-17.0-Aonly-10-20190909-ErfanGSI.img.7z
For permissive: https://androidfilehost.com/?fid=600693192411788649
For bitzygote:
https://androidfilehost.com/?fid=1395089523397961748
Permissive link not working
shingers5 said:
Permissive link not working
Click to expand...
Click to collapse
Missed one digit at the end.
Permissiver link:
https://androidfilehost.com/?fid=6006931924117886495
This won't boot on global mix max 3 boot loop with both Nigel mod and orangefox recoveries. No work for global 4gb 64gb ROM model
shingers5 said:
This won't boot on global mix max 3 boot loop with both Nigel mod and orangefox recoveries. No work for global 4gb 64gb ROM model
Click to expand...
Click to collapse
I was on the latest Havoc Rom for Mi Max 3. Also my hardware is 6GB 128GB.
I tried a lot of the Android 10 GSIs and this was the only one that booted. The sequence has to be exactly same as in my post to boot.
Also, I don't know if it may have to do with your vendor. I didn't wipe and then flash the device-specific vendor firmware as suggested in some GSI how-to's.
So you were on an android pie ROM and flashed android 10 over it without wipe? I was on miui 11 before flash on global device
shingers5 said:
So you were on an android pie ROM and flashed android 10 over it without wipe? I was on miui 11 before flash on global device
Click to expand...
Click to collapse
Yes Havoc Pie Rom. I wiped davlik/art, system, data and cache only. Then proceeded exactly as outlined in my post. I have just flashed the LOS 17 again with my steps and it boots.
stonesolouk said:
Yes Havoc Pie Rom. I wiped davlik/art, system, data and cache only. Then proceeded exactly as outlined in my post. I have just flashed the LOS 17 again with my steps and it boots.
Click to expand...
Click to collapse
first attempt
i had derpfest AOSIP so i flashed LOS 17 over that with no wipe then the permissive and fix zip and it booted with errors. gestures for home works but edges dont. also kept fail on system etc
2nd attempt
flashed derpfest AOSIP then reboot
back to recovery then wipe as you did flash LOS17 then permissive and fix zips then reboot. boots up but same as before home gesture works and dark mode etc but edges don't. the bitgapps dont flash and open gapps nano causes bootloop on its own
3rd attempt gonna try with firmware 9.9.3 and flash without wipe vendor like the old days to see what happens
Got it good as I can for now
Flashed and booted AEX 6.7
Back to recovery and wiped as you say and not vendor
Flashed LOS 17 image then permissive and fix zips and magisk
Reboot
Didn't need flash 2 gapps just open gapps nano and reboot
Seems good apart from obvious
Brightness doesn't work
Camera
Battery drain very high
shingers5 said:
Got it good as I can for now
Flashed and booted AEX 6.7
Back to recovery and wiped as you say and not vendor
Flashed LOS 17 image then permissive and fix zips and magisk
Reboot
Didn't need flash 2 gapps just open gapps nano and reboot
Seems good apart from obvious
Brightness doesn't work
Camera
Battery drain very high
Click to expand...
Click to collapse
That's great. It settles down after a few more boots. I will update my post with your findings.
Brightness and all edge gestures work for me though.
stonesolouk said:
That's great. It settles down after a few more boots. I will update my post with your findings.
Brightness and all edge gestures work for me though.
OK cool. Hopefully someone can get it working fully or at least stable enough for daily use
Click to expand...
Click to collapse
And what about the AOSIP-Aonly-10-20190924-ErfanGSI.7z? Do I flatten the Lineage-17.0-Aonly-10-20190909-ErfanGSI.img or do I have to decide between one of them?
Does not herfor from the instructions
rudiratlos57 said:
And what about the AOSIP-Aonly-10-20190924-ErfanGSI.7z? Do I flatten the Lineage-17.0-Aonly-10-20190909-ErfanGSI.img or do I have to decide between one of them?
Does not herfor from the instructions
Click to expand...
Click to collapse
Yes it is one or the other.
You could try each one separately, then decide the one you prefer. AOSiP seems more fluid and stable.
Thank you for your prompt reply
What's the report on AOSIP as I haven't tried it yet. Wish someone would take the gsi and get it stable
shingers5 said:
What's the report on AOSIP as I haven't tried it yet. Wish someone would take the gsi and get it stable
Click to expand...
Click to collapse
It is smoother and more stable compared to LOS 17 but brightness slider and camera still don't work.
Via Telegram:
Color OS 7 (Realme UI) - GSI Leaked
Any rooted users can flash this GSI
GSI link (A Only partition) oint_right: https://drive.google.com/file/d/11MROfyPiTsv1wc9yFPpMY0wVvwjnX_ov/view?usp=sharing
GSI link (AB partition) oint_right: https://drive.google.com/file/d/1w1tl0fCLe_fudsubCe2uE4khJJhXJQjD/view?usp=drivesdk
Permessiver V5 oint_right: https://androidfilehost.com/?fid=6006931924117940902
Flashing Instructions:
1. Clean wipe (except vendor / Internal storage)
2. Flash GSI (As system img partition)
3. Flash Permessiver v5
4. Reboot to system & Enjoy :heart:
Click to expand...
Click to collapse
I haven't tested it. Proceed at your own risk.
does not work, gives an error and the touch does not work, the a only version does not work, set the a \ b version, we wait for the instructions
Hmmm I wonder 8f the permissive zip might work to get Other GSI's to boot?
Touch issue
After booting this GSI in realme X2 pro touch didn't work . How to fix touch issue?
Did anyone fix the Touch issue
Ranserot said:
does not work, gives an error and the touch does not work, the a only version does not work, set the a \ b version, we wait for the instructions
Click to expand...
Click to collapse
Happened the same, did you manage to fix it?
Thanks..what's is the img file size for a only..