Related
I recently installed the GA5151F in my 2007 mazdaspeed. I do did not get any manuals for it. They gave me a link for a website manual but that unit was not listed. Does anyone have those? I contacted Eonon too and if I get them I will post them here.
I am also wondering if I can use the Malaysk rom with this unit and if so is there a guide to doing it? I have been searching and reading but not quite sure exactly what I need. The info for this seems to be all over the place or else I am just not seeing it. I have rooted and flashed android devices before. Thank you for all and any help.
I have the same unit in my Mazda3 with no manuals. Didn't really ever need it though since there was an installation video. What exactly are you looking for with the manual?
destructo322 said:
I have the same unit in my Mazda3 with no manuals. Didn't really ever need it though since there was an installation video. What exactly are you looking for with the manual?
Click to expand...
Click to collapse
I wasn't looking for anything specific, just wanted to look it over to see if I was missing anything important. Did you modify yours with a different rom or anything?
JohnnyTightlips said:
I wasn't looking for anything specific, just wanted to look it over to see if I was missing anything important. Did you modify yours with a different rom or anything?
Click to expand...
Click to collapse
Not yet. I've actually been looking over a lot of sources to see what changes I can make. Malaysk ROM looks like it should be good as long as you use the ones for RK3188 / 800 x 480 resolution. That can be found here: http://forum.xda-developers.com/showthread.php?t=3246370. Information and instructions on where I found that it works is here: http://forum.xda-developers.com/android-auto/android-head-units/eonon-ga5153f-mcu-t3217479/page2
It looks like changing the rom is fine as long as you don't make any changes to the MCU because i don't find any support for MTCB-ZD.
You can also find other useful apps and information at the following link that are applicable to most android units:
http://forum.xda-developers.com/wiki/Hui_Fei_Type#MTCB_Android_Automotive_Head_Units
Let me know if you make any changes to your system as I won't have access to mine for another two weeks.
destructo322 said:
Not yet. I've actually been looking over a lot of sources to see what changes I can make. Malaysk ROM looks like it should be good as long as you use the ones for RK3188 / 800 x 480 resolution. That can be found here: http://forum.xda-developers.com/showthread.php?t=3246370. Information and instructions on where I found that it works is here: http://forum.xda-developers.com/android-auto/android-head-units/eonon-ga5153f-mcu-t3217479/page2
It looks like changing the rom is fine as long as you don't make any changes to the MCU because i don't find any support for MTCB-ZD.
You can also find other useful apps and information at the following link that are applicable to most android units:
http://forum.xda-developers.com/wiki/Hui_Fei_Type#MTCB_Android_Automotive_Head_Units
Let me know if you make any changes to your system as I won't have access to mine for another two weeks.
Click to expand...
Click to collapse
Thanks a lot for the info, I may just mess with it this weekend. I will keep you posted.
HU Updated
I got a little bored last night and decided to go through with this.
I put the update_4_4_4_FUSE_800X480_RK3188_16_MAL_22_05_2016_AUDIO on my head unit and it worked.
I put update.img on the root of a usb stick and put it in the port labeled usb.
I turned on the unit and went into the Settings menu, move to very bottom of the menu, select “About tablet”
Select “System Updates”
Select “Wipe data from the flash” option and click “Install”
I then let it fully install and it sat at the mazda logo forever. I finally read more of the instructions and saw it will always do that.
I shut the car off.
I then turned the car back on holding the power button and I pushed the reset button, not sure which one did it but then it showed it was erasing
After that it booted up and everything worked well.
My only issue is that the Android Head Unit app service thing does not control google music, which is the only music app I really want to use.
Any ideas?
Also is there a guide for this rom and all the cool features it has?
I also don't understand how I stop the radio when I switch to another app like google music? It keeps playing unless I hit the mode button and switch to music.
Another problem I would like to address is when my phone connects over bluetooth for it to auto turn on wifi tether, I think tasker can do this but I wasn't sure if there was another app. I do really like this head unit but I have a lot of tweaking to do before I get it where I would like it.
JohnnyTightlips said:
I got a little bored last night and decided to go through with this.
I put the update_4_4_4_FUSE_800X480_RK3188_16_MAL_22_05_2016_AUDIO on my head unit and it worked.
I put update.img on the root of a usb stick and put it in the port labeled usb.
I turned on the unit and went into the Settings menu, move to very bottom of the menu, select “About tablet”
Select “System Updates”
Select “Wipe data from the flash” option and click “Install”
I then let it fully install and it sat at the mazda logo forever. I finally read more of the instructions and saw it will always do that.
I shut the car off.
I then turned the car back on holding the power button and I pushed the reset button, not sure which one did it but then it showed it was erasing
After that it booted up and everything worked well.
My only issue is that the Android Head Unit app service thing does not control google music, which is the only music app I really want to use.
Any ideas?
Also is there a guide for this rom and all the cool features it has?
I also don't understand how I stop the radio when I switch to another app like google music? It keeps playing unless I hit the mode button and switch to music.
Another problem I would like to address is when my phone connects over bluetooth for it to auto turn on wifi tether, I think tasker can do this but I wasn't sure if there was another app. I do really like this head unit but I have a lot of tweaking to do before I get it where I would like it.
Click to expand...
Click to collapse
Thanks for the info. Should be useful when I get to it so I don't freak out from the logo.
For Google Play Music: http://forum.xda-developers.com/showthread.php?p=63877529 . I think this app just had a checkbutton for me to use spotify, but it should support google play although I'm not sure if you need to do anything extra.
Malaysk guide: I am not aware of any, but it seems to be used across a lot of head units so there is probably some videos on YouTube.
Radio issue: I think it may be a bug in Eonon's MCU which is only updated by Eonon and you probably have to specifically ask them for any updates. I may do that at some point because it annoys me also. I usually was just exiting out using the back button before I found that mode fixes it temporarily just recently. You might be able to just use Tasker to kill the radio app whenever Google Play Music is opened.
Auto-tether: I used tasker to do this whenever it connects to EONON on bluetooth and would automatically end the tether when disconnected. Other apps may work such as https://play.google.com/store/apps/details?id=eu.inrete.autotethering&hl=en
As for me, I used to have my unit set up where tasker on the phone would turn on hotspot and use spotify through the head unit. Now, I just have my HU start up at bluetooth and tasker on my phone opens a specific spotify playlist whenever it detects i am connected to Eonon. I mainly do this just because I download songs on spotify and podcasts to my phone whenever I'm on wifi to save data. I'm thinking about mirroring my phone using EasyConnected and seeing how that works out on the HU.
JohnnyTightlips said:
I recently installed the GA5151F in my 2007 mazdaspeed. I do did not get any manuals for it. They gave me a link for a website manual but that unit was not listed. Does anyone have those? I contacted Eonon too and if I get them I will post them here.
I am also wondering if I can use the Malaysk rom with this unit and if so is there a guide to doing it? I have been searching and reading but not quite sure exactly what I need. The info for this seems to be all over the place or else I am just not seeing it. I have rooted and flashed android devices before. Thank you for all and any help.
Click to expand...
Click to collapse
Is it an MTCB head unit ? Can you post a pic of your settings/about device screen ?
typos1 said:
Is it an MTCB head unit ? Can you post a pic of your settings/about device screen ?
Click to expand...
Click to collapse
Will post pics soon, life is crazy busy atm.
http://imgur.com/a/hoWtd
Is this what you are looking for?
JohnnyTightlips said:
http://imgur.com/a/hoWtd
Is this what you are looking for?
Click to expand...
Click to collapse
Yeah, the last pic was.
You have an MTCB units made by ZD.
There are some manuals around, come KLD ROMs have them on the unit, you dont really need one, but if you must one have I could get a copy for you, its not very detailed and its the same for all units from all manufacturers apart from minor details like the launcher.
typos1 said:
Yeah, the last pic was.
You have an MTCB units made by ZD.
There are some manuals around, come KLD ROMs have them on the unit, you dont really need one, but if you must one have I could get a copy for you, its not very detailed and its the same for all units from all manufacturers apart from minor details like the launcher.
Click to expand...
Click to collapse
Eonon just sent me this.
Wish you a good day.
Sorry for inconvenience caused.
Here is online user manual for your reference:
http://i.sbo2.com/page/GASeriesAndroid4.4Manual(eonon)_EN.html
Here is an installation video for your reference:
https://www.youtube.com/watch?v=jZIsormC28A
Any further questions pls feel free to contact me.
Have a nice day.
typos1 said:
Yeah, the last pic was.
You have an MTCB units made by ZD.
There are some manuals around, come KLD ROMs have them on the unit, you dont really need one, but if you must one have I could get a copy for you, its not very detailed and its the same for all units from all manufacturers apart from minor details like the launcher.
Click to expand...
Click to collapse
Does that microphone mod still apply to these units? I have not had a chance to test the external mic but it is all hooked up. Another thing I was wondering is if you still need to do the audio mod to get better sound quality on these units as well. I won't be taking it apart any time soon but when I upgrade to an amp and better speakers I might if that is still needed. I also can not figure out how to get the screensaver mph to display anything and the clock is wrong. Thanks for the help.
JohnnyTightlips said:
Does that microphone mod still apply to these units? I have not had a chance to test the external mic but it is all hooked up. Another thing I was wondering is if you still need to do the audio mod to get better sound quality on these units as well. I won't be taking it apart any time soon but when I upgrade to an amp and better speakers I might if that is still needed. I also can not figure out how to get the screensaver mph to display anything and the clock is wrong. Thanks for the help.
Click to expand...
Click to collapse
The ZD units are relatively rare, I think youd have to take yours apart to see about the mic set up, but its probably roughly the same as the other units, which are all slightly different but they all need modding, best check out the mic mod thread to see if anyone has done it to a ZD unit.
Pretty certain it will have he audio controller hooked up to the MCU rather than Android so you would need to do 7floor's audio mod, assuming of course that youre not happy with the sound as it is, there is a slight sound quality improvement with the Lollipop update so you may wanna try that.
What screensaver is that, one from on here or did it come on the unit ?
---------- Post added at 01:28 AM ---------- Previous post was at 01:15 AM ----------
destructo322 said:
It looks like changing the rom is fine as long as you don't make any changes to the MCU because i don't find any support for MTCB-ZD.
Click to expand...
Click to collapse
Its not that the MCU is not suported, its that the ZD units have only started appearing recently so they are no MCU updates yet, plus you cant get a copy of the MCU off the unit, in time ZD MCU updates will no doubt turn up.
destructo322 said:
Radio issue: I think it may be a bug in Eonon's MCU which is only updated by Eonon and you probably have to specifically ask them for any updates. I may do that at some point because it annoys me also. I usually was just exiting out using the back button before I found that mode fixes it temporarily just recently. You might be able to just use Tasker to kill the radio app whenever Google Play Music is opened.
Auto-tether: I used tasker to do this whenever it connects to EONON on bluetooth and would automatically end the tether when disconnected. Other apps may work such as https://play.google.com/store/apps/details?id=eu.inrete.autotethering&hl=en
Click to expand...
Click to collapse
These units need an app to control switching between music apps other than the MTC ones that they come with, otherwise your ll get 2 sources playing at once, this is what @JohnnyTightlips was referring to.
Eonon are sellers ONLY, all they do is buy these from ZD, stick badges on and sell them, they do not make the MCU or have anything to do with it, its a ZD MCU ie, like all the other MTCB units, its an STMicroElectronics MCU with software developed by MTC for ZD. Its not an Eonon MCU, the radio issue he was talking about is the one I referred to above.
Forget about Eonon (apart from as a possible source of updates) and about "GA5151F" (it means nothing), you both have ZD MTCB head units - a good example is if you bought a BMW from a dealers called Smith & Son, you dont have a car called a Smiths & Son, you have a BMW.
My next and previous track steering wheel controls don't seem to work in Google play music. I see the next and previous toast come up on the screen when I press them but nothing happens in the app. volume and mute work great. I'm not sure if maybe there is a setting I'm missing. I also don't know what the control settings app does. And in the viper audio tool what settings do I adjust for Android music apps? Also what is the biggest fat32 SD card I can have in each slot 128gb? Thanks for the help.
JohnnyTightlips said:
Does that microphone mod still apply to these units? I have not had a chance to test the external mic but it is all hooked up. Another thing I was wondering is if you still need to do the audio mod to get better sound quality on these units as well. I won't be taking it apart any time soon but when I upgrade to an amp and better speakers I might if that is still needed. I also can not figure out how to get the screensaver mph to display anything and the clock is wrong. Thanks for the help.
Click to expand...
Click to collapse
Isn't the mic mod just for units that only have internal mics? The HU already has the option for an external microphone so I don't see much reason needed to solder in an external mic. Nobody that's called me has complained of the internal mic so I haven't even connected an external yet, but I might next time I take it out because it's too annoying to put back in.
I have the external mic hooked up and did a test the other day. I was driving at 80mph and the person on the other line said I sounded great and it sounded like I was using the phone itself. My external is mounted to the top/side of the steering column.
JohnnyTightlips said:
My next and previous track steering wheel controls don't seem to work in Google play music. I see the next and previous toast come up on the screen when I press them but nothing happens in the app. volume and mute work great. I'm not sure if maybe there is a setting I'm missing. I also don't know what the control settings app does. And in the viper audio tool what settings do I adjust for Android music apps? Also what is the biggest fat32 SD card I can have in each slot 128gb? Thanks for the help.
Click to expand...
Click to collapse
Control settings is for CAN Bus data, different apps will appear depending on what setting you have your unit set on in factory settings.
destructo322 said:
Isn't the mic mod just for units that only have internal mics? The HU already has the option for an external microphone so I don't see much reason needed to solder in an external mic. Nobody that's called me has complained of the internal mic so I haven't even connected an external yet, but I might next time I take it out because it's too annoying to put back in.
Click to expand...
Click to collapse
All units have built in mics, most people find it useless for calls but some find it ok for google now.
JohnnyTightlips said:
I have the external mic hooked up and did a test the other day. I was driving at 80mph and the person on the other line said I sounded great and it sounded like I was using the phone itself. My external is mounted to the top/side of the steering column.
Click to expand...
Click to collapse
Most, but not all, people find they need to do the mic mod.
Does that canbus app let you do anything? I opened it and it have a bunch of buttons but nothing seemed to do anything. Is that where I am supposed to set what the steering controls do?
JohnnyTightlips said:
Does that canbus app let you do anything? I opened it and it have a bunch of buttons but nothing seemed to do anything. Is that where I am supposed to set what the steering controls do?
Click to expand...
Click to collapse
No, its not for SWC, only for CAN Bus, not all cars are supported.
Mirrored from my Amazon review on this unit:
Here are all of the pieces we purchased with the A62721PB 2G/32G, in order to install in our 2006 Dodge Ram 1500 truck. Install is still not complete, but I'll get to that in a bit.
(associate links removed for spam filter)
As you can see, its an ordeal to install this unit. Even the manufacturer doesn't seem to understand the vehicles it will be installed in, in our case, a 06 Ram 1500. Standard Chrysler wiring (would be the same for almost any 06 Dodge, Chrysler, Jeep... etc) telling me to tap into the -5v canbus wiring as the accessory switch. To properly install this in those vehicles, you need a CanBus adapter, which will give you the ability to turn to ACC and run the unit, and allow it to dim with the interior lighting. Neither of those are done in a 12v switched wire in these vehicles. Oh, and you will need an antenna adapter too... both of these I have yet to buy . If you have more than basic radio functions in your vehicle, you need a better install kit. Basic wiring wont cut it to do the job right.
As it is, I used a tap to the ignition switch (+12v) to turn the unit on until I have a few bucks to pick up a proper install. So think of all of that when buying. To get all the functions, you need more parts, so a $300 radio turns into a $500 radio quick.
OK.. Use. Most of my use is with Google Maps, Amazon Music (offline) or the backup cam. Getting those or any software setup with large downloads was a pain, as this unit shuts off the wifi with the key, so no updates while you sleep, and no way to turn that functionality on. Unless you leave your keys in the vehicle (not the best choice). And with the sub-par performance of the wifi in this unit, its going to take a while. I can see my home wifi all over my property with our phones. The truck only seems to see my neighbor's connection. The antenna is mounted under the black part of the windshield trim, just out of view. In fact, the only good reception I've gotten is with a portable hotspot in the truck. The A6 also cannot seem to see our 5gHz channels. These seem to be built to the same standards as generic 2010 tablets.
The built in pairing is useless. It just shares the screen image with the head unit. No controls, no passthrough... just video. If I wanted to use my phone I would have stuck to the ram mount. PDA-Net is the only way I've been able to connect, as my phone plan doesn't include wifi hotspot.
Speaking of phone hookup and this unity, you can share data (like PDA. net) or use fast charge. not both? And those USB leads really should come with some sort of bracket and template for in-dash installation. We plan on making these, but really, it would be a lot nicer to have it come with. Right now, they just fall out of the bottom of the dash like an afterthought.
Additionally, we negated to install the microphone. Most times people can hear you fine. If not, you have to re-boot the system. You also have to reboot when it wont pause music when a call comes in, or lower sound when the rear camera activates.
-Side note about that pause... most sub $30 bluetooth adapters resume your media when you start the vehicle back up. not this one.. you got to hush the FM software, navigate back to your music (Amazon music in our case) and then hit play. Since there is no play button on the factory remote, its a real pain in the backside. Not well thought out Atoto. -
Reverse cam is basic, we bought the matching ATOTO one and the quality is garbage. Looking for a better unit now. Nice that it just lowers the music while backing up, and doesn't cut out though.
I haven't tried to install a better home screen or layout in this unit. It would help to have a bit more open framework. The colors and designs are bland and garish at the same time (congrats on that hot mess Atoto) with no support for changing them.
The best looking interface and use so far has been Torque, which we have the pro version of, and has been useful to see a few tuning parameters as well as info for towing. We bought a generic ODB2 dongle and it works fine. The downside is the built in browser for looking up a trouble code that came from blowing out our dash lighting during install (dumb grounding mistake, should have known better and pulled the battery leads. ) No support for acceleration sensors though, seems the A6 does not have them. So if you want this for your autocross car, maybe skip it and just use a used Samsung Tab or something.
Im going to look into re-flashing the headunit after we button up the install with a better ROM, better apps, and hope I can find a good dashcam utility that works for this. CarWebGuru works at first, but then on re-boot will disable all sound, cameras, and the remote if left as the launcher. If not, it still works, but is kindof redundant.
overall, its a project. Take a full day to get it all installed, maybe longer to dial it in right.
Overall, so far, we spent a total of $368.17, and will be spending at least another $80 on this unit. I guess that is the name of the game when you want to do things right, and not spend $800+ on a turnkey system.
I also discovered that Prey security will install, but not open on this unit. Thought it would be nice to have a bit of additional theft protection int eh truck and the ability to track it if it did get stolen.
. I recently bought the a6 and had to learn the hard way also. I'm installing in a 13 Dodge Durango.
Majority of the extra cost would come with any new aftermarket unit since newer vehicles need to communicate with the can us system. I went in also thinking I could buy the cheap harness and be good to go. Majority of the Chinese headunits are made for international vehicles. . Most are plug and play.
I got on lightning deal for $200 and so far about $100 in parts. But I expect this with any aftermarket radio I install. Days of cheap harness and dash kit are over.
But anything is worth the cost vs my stock radio.
Just like any Chinese product(coming from Android TV boxes) they take a lot of tinkering but that comes with the cheap price. I plan on 8nstalling one of the car launchers and replacing every non essetnial app.
Power amp or gmmp for music. So with my limited testing, I've had a good experience. I'm within 20ft of my router at home so speeds been great. Bluetooth has been Rock solid also with media.
Will post more on Sunday when I complete the install.
Right on. I didnt have the cash to buy one from some place thats worked out more bugs. I have industry friends that sell a unit that retails at $800, adn I could get it wholesale, but thats still a chunk more cash than I had.
Got my wifi a bit better sorted this afternoon by putting a repeater out in my little tool shed, and finally have 75% of the tomtomgo USA map downloaded. This unit nor that app are good at downloading. I also noticed something about Car Web Guru on startup... if the factory launcher does not have default access, not only will certain things stop working (cameras, sound, USB), but it screws with the clock, which then throws off other apps that use the clock as part of any sort of key. Amazon does this with offline music, which I have a lot of on here.
TeamADW said:
Right on. I didnt have the cash to buy one from some place thats worked out more bugs. I have industry friends that sell a unit that retails at $800, adn I could get it wholesale, but thats still a chunk more cash than I had.
Got my wifi a bit better sorted this afternoon by putting a repeater out in my little tool shed, and finally have 75% of the tomtomgo USA map downloaded. This unit nor that app are good at downloading. I also noticed something about Car Web Guru on startup... if the factory launcher does not have default access, not only will certain things stop working (cameras, sound, USB), but it screws with the clock, which then throws off other apps that use the clock as part of any sort of key. Amazon does this with offline music, which I have a lot of on here.
Click to expand...
Click to collapse
I don't believe these stereos are any different from one another. I've read about changing launchers breaking things. Luckily I believe there is a fix out there.
Probably try emailing them for possible fix..
I still need the steering wheel module but thats something I'll do in future upgrade
intruda119 said:
I don't believe these stereos are any different from one another. I've read about changing launchers breaking things. Luckily I believe there is a fix out there.
Probably try emailing them for possible fix..
I still need the steering wheel module but thats something I'll do in future upgrade
Click to expand...
Click to collapse
I have emailed them, but the language barrier is strong here. Talked about changing the launcher, and they told me it is not possible, but I am willing to try more now that I have a few more tools at hand.
Just curious, if your vehicle doesn't have a 12v acc, is there a 12v power outlet /cig lighter (or anything else) that is controlled by the key. You could use any 12v that is controlled by the key and tie it the unit acc.
stabone00 said:
Just curious, if your vehicle doesn't have a 12v acc, is there a 12v power outlet /cig lighter (or anything else) that is controlled by the key. You could use any 12v that is controlled by the key and tie it the unit acc.
Click to expand...
Click to collapse
What vehicle do you have?
If nothing is there under the radio dash, you can tap into the fuse box.
Wont work. 12v+ ACC is controlled by the bus. With the key off, the cigar lighter ports are still charged with 8-10v, which the unit sees as an on trigger.
In order to get around this, you need a canbus controller, which is available from a few companies.
intruda119 said:
What vehicle do you have?
If nothing is there under the radio dash, you can tap into the fuse box.
Click to expand...
Click to collapse
I agree, fuse box would be your best bet. Aside from just the key switch, you could probably find a delayed off or open door off. If not, you just need to find a circuit activated by the key, could be any voltage made or ground made. Relays are cheap.
stabone00 said:
I agree, fuse box would be your best bet. Aside from just the key switch, you could probably find a delayed off or open door off. If not, you just need to find a circuit activated by the key, could be any voltage made or ground made. Relays are cheap.
Click to expand...
Click to collapse
Yeah need to know what type of vehicle it is.
Sent from my SM-N950U using Tapatalk
Any body get Waze working?
Unit can't find position/gps
Why would I do that in this truck with a relay and aux fuse panel, when I can control th dimming and ACC on via the canbus and an appropriate interface? Ive dealt with a lot of vehicle electronics (its part of my job) and going around a proven modern system with a bunch of jankey wiring just looks bad, especially in this case where it isnt needed.
In our Jeep Cherokee, maybe, but that also has things liek additional trailer wiring and radio equipment going in, as well as separate harnesses for the lighting to overcome stock deficiencies, but the Ram is pretty solid. Atoto says they have a built in canbus interface coming, just not there yet.
TeamADW said:
Why would I do that in this truck with a relay and aux fuse panel, when I can control th dimming and ACC on via the canbus and an appropriate interface? Ive dealt with a lot of vehicle electronics (its part of my job) and going around a proven modern system with a bunch of jankey wiring just looks bad, especially in this case where it isnt needed.
In our Jeep Cherokee, maybe, but that also has things liek additional trailer wiring and radio equipment going in, as well as separate harnesses for the lighting to overcome stock deficiencies, but the Ram is pretty solid. Atoto says they have a built in canbus interface coming, just not there yet.
Click to expand...
Click to collapse
Yeah why would you do that?
Our last few post was towards the guy asking about it. We can only assume he has an older vehicle.
intruda119 said:
Yeah why would you do that?
Our last few post was towards the guy asking about it. We can only assume he has an older vehicle.
Click to expand...
Click to collapse
Ah, my bad. Yeah, if you have an older vehicle, you could do a relay setup for ACC, but normally thats just a stop on the key, at least back to the 70s.
My thoughts.
Built in amp is 10x better than the stock one.
Very little lag when operating the unit. Lags a bit when streaming and downloading at same time.
Plays all types of media.
Screen is great. Easily used with sunlight shining through(sun roof)
Dims at night time correctly.
2sec boot is amazing.
Presistent app permissions notification drives me nuts.
App installs take forever(download is fast as the connection)
3ven thought 99% of time I'm listening to Google play or off HDD would be nice to limit volume when turning on car when fm radio auto starts.
Everything outside of my noobnesw and lots of user error has been plug and play. What's taking me 2 weeks so far would probably take experienced person 1hr or less.
I took apart the unit and can't understand why these units are bigger than name brand headunits. There is nothing in them but space.
Sent from my SM-N950U using Tapatalk
The screen is very nice. Boot time is more like time to pop the screen on, like when you hit the power button on your phone after its been in your pocket on standy. The real boot time takes forever (why is this microwave so slow!!!!1)
Mine keeps having issues with SD cards. have had it randomly say its corrupted, pull it out, reinsert, and all good. Just odd I think . And I finally found a good GPS app for this one, since it has enough space, the TomTom app is perfect. At least for my uses, even with having to pay for a month when using it for longer distances.
My biggest issue other than the few mentioned already in this thread, is the lack of speaker settings. There isn't enough options for speaker fine tuning, and as a result I can't get my speakers to sound good at all without massive distortion and clipping. Anyone know if there's a solution for this?
XDApurp said:
My biggest issue other than the few mentioned already in this thread, is the lack of speaker settings. There isn't enough options for speaker fine tuning, and as a result I can't get my speakers to sound good at all without massive distortion and clipping. Anyone know if there's a solution for this?
Click to expand...
Click to collapse
Best I can think of would be through a different amplifier than the built in one. Best luck I have had is with the "natural" setting. Its all software based, I found that it stops working and needs rebooted to get the profile back. Im betting thats a driver issue, and one we wont see updated in the A6.
You guys do know the trick about hitting BACK when the FM tuner comes up, then selecting the Atoto AUX and hitting HOME (leaving it in memory) to prevent the auto-start of FM and getting blasted out of the cab, right?
With the AUX trick, CarWebGuru (or other launchers) will autostart just fine. Every now and then (especially after a long power-off, like a day or two) you might have to repeat the trick, and more often, you'll need to manually start AUX if things like steering wheel controls or the Atoto equalizer isn't working after a restart (Aux or FM will force a restart of the MCU hardware).
Hello, everyone.
I bought a Dasaita 10.2" Android head unit for my Jeep about a year ago. Love the Android functionality. However, it's got some quirks. I am hoping someone can give me some guidance on them.
I'll start with (hopefully) the simplest:
1) Visualizers don't ever work. That's unfortunate, but such a large head unit with a nice screen. Is there a setting somewhere that might make them work?
2) Sometimes when I first start the vehicle, the default (and crappy) mp3 player starts up automatically. I never use it, but can't uninstall it. There must be a hidden setting somewhere that tells the unit to start this app, but I can't find it.
3) Someone said I could view the backup camera even when not backing up. I changed the settings like another thread said, or I thought I did, but I never get any video from the backup camera unless I'm actually in reverse.
4) Only about 3 times now, it has frozen when I back up, and when I am moving forward again, it still shows the last view, a frozen snapshot, from the backup camera. No controls work. It must be restarted to get that camera view off the screen.
5) I see firmware updates on XDA, but am not sure how to tell which one is for my device. I can't post a link to the one I bought from Amazon, but the description says this: "Dasaita 10.2 inch Large Screen Unviersal Double Din Car GPS Stereo 4G+32G OCTA-Core Chip For Jeep Wrangler 2015 2016 2017 With Blutooth Wifi Car Audio 8G Meomery Card"
6) 3 USB connectors, but only 1 seems to work. When I asked support about it, Quick said to use the one that works because it is "more stable." Is there another purpose for the other two?
7) I didn't use the external mic for Bluetooth, and although Bluetooth works and I can hear people fine, people complain every conversation that they can't hear me. Even if I'm sitting parked. I finally gave up on Bluetooth. Is the included mic a lot better? Apparently it's unusable for me as-is.
Overall, I love the functionality and can't imagine going back to a standard head unit. Would like to just fix these quirks. If you have a fix for any of them, please let me know!
Thanks,
Brian
Hello, I hope this is the right place, I keep finding this forum every time I search trying to trouble shoot my issues. Long story short, I had been eyeing these head units for my Q5 to add CarPlay, a local installer recommended the same model, and I thought great, so I ordered it and they installed it. I am however having 3 issues, and while the seller has been helpful, they are on a completely different time zone and it’s not progressing well unfortunately. The installer can’t find anything wrong. Little did I know what I was getting into, and I can’t find a manual or even a specific model number to search on.
My Car:
2013 Audi Q5 MMI (3g, gps nav, etc built in, AMI port in glove box, but everything else is in the center console under the screen)
Unit I installed as recommended by installer:
Android 10.0 Head Unit for Audi Q5 2009-2017 Car GPS Navi Stereo Radio 4G BT RDS 732910618142 | eBay
Find many great new & used options and get the best deals for Android 10.0 Head Unit for Audi Q5 2009-2017 Car GPS Navi Stereo Radio 4G BT RDS at the best online prices at eBay! Free shipping for many products!
www.ebay.com
My 3 issues:
1) My OEM backup camera does not show video. The radar sensors work. When I put the car into reverse the unit changes to backup mode, but the video image is black. There are multiple backup camera options in the software, I have tried them all. The after market selections at least give me the radar visual and lane lines, but still no video feed. The OEM option only shows me a black screen with a picture of a Q5 on the right.
2) The audio from the head unit is not coming through the car stereo. None of the center console controls work. The right 2 control buttons around the knob are both always flashing slowly. Only Radio works and can be controlled by steering wheel. My phone seems to be synced to car‘s original Bluetooth, and audio takes over when I get a call.
3) My airbag light in the dash is on. I am certain this is because the bezel they sent me only has the hazard light switch.
The unit otherwise is getting better and better as I learn to use it and CarPlay, which I ultimately bought it for, is working well too. My wife and I though are really struggling without the backup camera, and I fear I’ll be ripping the whole thing out and putting the original unit back in if I can’t fix that.
I have pictures of everything inside and out I can share. I’ll add them later as I can. But since this forum keeps coming up in my searches, I thought I would get a conversation started and see if anyone could help me. Really appreciate any assistance in advance. At this point I’ve become versed in taking the car apart and can get behind the entire vertical stack in the center and have confirmed what I can. I’m pretty handy with software as well.
(At the very least to start, a picture of my backup camera options in the software, I’ve tried them all)
jcapxda said:
Hello, I hope this is the right place, I keep finding this forum every time I search trying to trouble shoot my issues. Long story short, I had been eyeing these head units for my Q5 to add CarPlay, a local installer recommended the same model, and I thought great, so I ordered it and they installed it. I am however having 3 issues, and while the seller has been helpful, they are on a completely different time zone and it’s not progressing well unfortunately. The installer can’t find anything wrong. Little did I know what I was getting into, and I can’t find a manual or even a specific model number to search on.
My Car:
2013 Audi Q5 MMI (3g, gps nav, etc built in, AMI port in glove box, but everything else is in the center console under the screen)
Unit I installed as recommended by installer:
Android 10.0 Head Unit for Audi Q5 2009-2017 Car GPS Navi Stereo Radio 4G BT RDS 732910618142 | eBay
Find many great new & used options and get the best deals for Android 10.0 Head Unit for Audi Q5 2009-2017 Car GPS Navi Stereo Radio 4G BT RDS at the best online prices at eBay! Free shipping for many products!
www.ebay.com
My 3 issues:
1) My OEM backup camera does not show video. The radar sensors work. When I put the car into reverse the unit changes to backup mode, but the video image is black. There are multiple backup camera options in the software, I have tried them all. The after market selections at least give me the radar visual and lane lines, but still no video feed. The OEM option only shows me a black screen with a picture of a Q5 on the right.
2) The audio from the head unit is not coming through the car stereo. None of the center console controls work. The right 2 control buttons around the knob are both always flashing slowly. Only Radio works and can be controlled by steering wheel. My phone seems to be synced to car‘s original Bluetooth, and audio takes over when I get a call.
3) My airbag light in the dash is on. I am certain this is because the bezel they sent me only has the hazard light switch.
The unit otherwise is getting better and better as I learn to use it and CarPlay, which I ultimately bought it for, is working well too. My wife and I though are really struggling without the backup camera, and I fear I’ll be ripping the whole thing out and putting the original unit back in if I can’t fix that.
I have pictures of everything inside and out I can share. I’ll add them later as I can. But since this forum keeps coming up in my searches, I thought I would get a conversation started and see if anyone could help me. Really appreciate any assistance in advance. At this point I’ve become versed in taking the car apart and can get behind the entire vertical stack in the center and have confirmed what I can. I’m pretty handy with software as well.
(At the very least to start, a picture of my backup camera options in the software, I’ve tried them all)
Click to expand...
Click to collapse
Sorry to say, issue 1 and 3 are quite sure installation issues.
For the first one: Quite clear and could be measured: The backup camera has no power. There should be a connector for the power feed. --> instructions.
Third one: They removed the connector for the airbag, while checking the unit with ignition on. Can be reset at the dealer or by someone who has the right tooling.
Second one: Look into the settings of the unit and check the settings for the CAN box. 2 possibilities here: You got the wrong CAN box or the setting is not set to external amplifier.
@rigattoni thank you
rigattoni said:
Sorry to say, issue 1 and 3 are quite sure installation issues.
For the first one: Quite clear and could be measured: The backup camera has no power. There should be a connector for the power feed. --> instructions.
Click to expand...
Click to collapse
Well installation issues, at this point I think I can fix (famous last words). Getting parts / seems to be harder with communication challenges. (was instructions supposed to be a link?)
I pulled things out last night, I didn't find the RCA yellow video in I expected (there are 2 but they both seemed to be for aftermarket and are disconnected. There wasn't the obvious yellow <-> yellow rca adapters I see everyone else have with the power feed to the reverse lights. I'm assuming it's (in theory) feeding in through the primary adapter (block of plugs) going in to the back of the Android unit. I was able to account for all other connectins.
rigattoni said:
Third one: They removed the connector for the airbag, while checking the unit with ignition on. Can be reset at the dealer or by someone who has the right tooling.
Click to expand...
Click to collapse
They reset it, it keeps coming back on. My original had a light, this bezel doesn't. As I understand there is likely some resisitance that's supposed to be here ...
rigattoni said:
Second one: Look into the settings of the unit and check the settings for the CAN box. 2 possibilities here: You got the wrong CAN box or the setting is not set to external amplifier.
Click to expand...
Click to collapse
Thanks, I will check settings. There's a "key settings" and offers 4 & 8. It's the only major configuration section I don't understand. But I think I've tried both. Will look again.
jcapxda said:
Well installation issues, at this point I think I can fix (famous last words). Getting parts / seems to be harder with communication challenges. (was instructions supposed to be a link?)
Click to expand...
Click to collapse
No link, the seller should at least provide some installation instruction with the unit.
As I don´t know the unit and don´t know what has been provided with the unit itself, I am not able to help.
Your backup camera should have a video output which needs to get connected with the head unit. Where to put, needs to get from the seller. If he is not able... send this crap back.
The same for the airbag error message... If the seller is not able to give clear instruction... send the crap back.
Seller finally agreed they didn't send me all the right cables. Specifically they mentioned I need an AMI cable, but also the LVDS plug (in the photo above, in the top left) ... should have an adapter. Which I've specifically asked them about a few times in pictures, but as I suspected it, it can't just be unplugged and needs an adapter to plug into the rest. So... those are on their way, we'll see. I suspect the OEM backup cam video comes in via that cable based on my research and wiring diagrams, but again, we'll see.
jcapxda said:
Seller finally agreed they didn't send me all the right cables. Specifically they mentioned I need an AMI cable, but also the LVDS plug (in the photo above, in the top left) ... should have an adapter. Which I've specifically asked them about a few times in pictures, but as I suspected it, it can't just be unplugged and needs an adapter to plug into the rest. So... those are on their way, we'll see. I suspect the OEM backup cam video comes in via that cable based on my research and wiring diagrams, but again, we'll see.
Click to expand...
Click to collapse
Good to know.
Did they give you a guide how to fix the airbag issue?
Just to let you know: In case of an accident, the airbags can be activated or not without control. This is a severe security issue, you should take care of.
The AMI cable just provides audio and is normally used for external audio sources like iPod, IPhone and such things. May be they use it to get the head unit speaking to your OEM amplifier. I don´t know your unit and the specs. At least Audi is not that easy with these kind of units.
Well, predictably, nothing's easy.
They sent me a splitter cable for the airbag (passenger occupancy light) and hazard button. (but there's only one input to split into ....
LVDS cable was missing, so that connects the LVDS feed -> back of android. I do finally have some sight to the OEM UI, but only briefly, and I can't interact with it with any buttons. The backup camera will come on but only briefly, and only the first time. After that it cuts to OEM nav, and then only for a second.
AMI adapter (straightforard) would in theory help audi, but I suspect the priori issue with the oem system and lack of mmi buttons working is somehow blocking control / and thus "aux" audio.
However, at the least, I was able to remove the OEM occupancy / hazazrd button, and attach it to the splitter they gave me. Tucked it into the dash (meaning I can't... see the light but for now fine) and cleared the Air bag code. And yes, air bag stays off. Finally. So that's better.
I'm awaiting their reply on all the rest. Driving me crazy. Based on searches, I'm starting to wonder if this is programmed for the wrong baud rate? I only vaguely know these terms, but have stumbled across similar symptoms of people retrofitting MMI 3G+ and issues witht the controls not working, flashing red lights.
jcapxda said:
Well, predictably, nothing's easy.
They sent me a splitter cable for the airbag (passenger occupancy light) and hazard button. (but there's only one input to split into ....
LVDS cable was missing, so that connects the LVDS feed -> back of android. I do finally have some sight to the OEM UI, but only briefly, and I can't interact with it with any buttons. The backup camera will come on but only briefly, and only the first time. After that it cuts to OEM nav, and then only for a second.
AMI adapter (straightforard) would in theory help audi, but I suspect the priori issue with the oem system and lack of mmi buttons working is somehow blocking control / and thus "aux" audio.
However, at the least, I was able to remove the OEM occupancy / hazazrd button, and attach it to the splitter they gave me. Tucked it into the dash (meaning I can't... see the light but for now fine) and cleared the Air bag code. And yes, air bag stays off. Finally. So that's better.
I'm awaiting their reply on all the rest. Driving me crazy. Based on searches, I'm starting to wonder if this is programmed for the wrong baud rate? I only vaguely know these terms, but have stumbled across similar symptoms of people retrofitting MMI 3G+ and issues witht the controls not working, flashing red lights.
Click to expand...
Click to collapse
Hello where did you put the splitter into?
1 goes to the original cable
1 goes to the new framepanel (without the air bag light)
and where goes the third cable?
Please help thx
During a recent sale at AliExpress, I ordered an Android headunit that replaces the factory screen for my 2016 B8.5 Audi. I ordered from the "Nunoo" store due to them listing a Snapdragon 665, and I ordered the supposed 8 GB/128 GB model for my MMI car.
https://www.aliexpress.us/item/3256805118631091.html
The unit hasn't shipped, so I messaged the store asking what's up and making sure that the order was going to fit my particular car (needed an Air Bag light relocation cable and AMI cable). I also asked to confirm it actually had the Qualcomm chip. The seller messaged me back saying that it would instead ship with a 8581 processor due to issues with the 665:
"The cpu will become 8581, because 665 CPU with some problem"
I'm getting sketchy vibes. Is there any hope that these units are worth messing with? Since ordering this, I've done some more reading around and see where Chinese sourced units often mis-report hardware, versions of OS's, etc.
I'm currently running an android box that attaches to the stock, non-touch screen in the car and allows for wireless Android Auto. It connects to Canbus and the MMI audio system, and is generally OK. It just has no touch screen, so I thought I'd upgrade. Should I bail on this order before they try to ship and look around for another seller?
Is there a Android head unit issues for dummies I should read to catch up on the state of these things?
Heya, the Listing only mentions an 8 Core Processor in the Pictures itself. It mentions the Snapdragon 665 Version down below but that is not selectable. I only know that because I myself just ordered one of those for my A6 4F MMI 2G. I had to search a bit for that Version. Just click a few different Listings on Aliexpress if you want that version.
I myself used an Android Head Unit in my Older A6 4B with a generic 8 Core CPU and that was more than enough Performance. it never had any lags or other things.
My Unit used an UIS7862, the 8581 seems to be a less powerful version of it. It could be Powerful enough to work without Lags but if you want to be really sure maybe search for reports of Headunits with the Spreadtrum UIS8581 CPU or try finding the Snapdragon 665 Version but be prepared that it's gonna be a whole lot more costly. And don't settle for the 625 Version, that is a pretty old CPU and all I could ever find about those Versions where lackluster performance and other issues
My unit finally shipped, so we'll see what I get.
Sweet, please report about that CPU Version Performance and stuff
It's sadly quite hard to find any Information about the Nunoo Headunits.
I'll try to keep this updated about the 665 Version that I just bought too
Well..... don't keep us in suspense.
Report back because i'm looking to buy a Nunoo 665 as well.
Sure, I put it in a couple of weeks ago. I did receive the 8581 chip version.
Some notes on use:
Install went about as expected, with the exception that to mount the included dash bezel that the screen attaches to over the old hole, you can only access two screws on the new mounting plate instead of 3...unless you want to drill into your original dash to pass the third screw. I doubt I do that as I want it to be reversable.
I did have problems with an ABS light. My car has the combo hazard button and passenger seat Air Bag light (to show if passenger AB is disabled due to not having enough weight in the seat). Once confirmed the wiring hookup configuration for the hazard button relocation harness, I was a bit frustrated that the light was still on. It might have eventually cleared itself after a few ignition cycles, but I really wanted to figure it out so I used my OBDEleven OBD2 scanner to reset the code (ABS ground fault). No problems since.
I haven't 100% put the dash back together yet because I'm going to try a GPS splitter cable to tie into the stock antenna instead of using the included one. I tried the included one with a GPS testing app and could never get acceptable signal strength vs what I could get on my phone, even if I ran the included receiver all the way to the top of the windshield. This probably is irrelevant as it doesn't affect Android Auto/CarPlay, which rely on the phone GPS. I'm just curious about the built in navigation and it wasn't a bunch to spend to try out. Once that comes in, I'll put the main dash bezel back in the car. If it doesn't work, that's not a deal breaker. Was just curious if I could improve things. If it does work, I don't know why this wouldn't really be the included option vs a whole receiver. (BTW, if anybody else goes this route, get the right angle SMA connector. The straight one won't fit in the space available.) https://www.aliexpress.us/item/3256...st_main.5.1c3518024jcmmd&gatewayAdapt=glo2usa
Wireless connection is iffy at times. Sometimes it's great, sometimes I can watch the bluetooth connect on my phone then try to hand off to wifi for Android Auto and it will just cycle the wifi connection to the head unit over and over. Other times it works right away and stay stable. Can't figure out if there's something that can resolve this. Still playing around. Wired Android Auto is fine. According to the seller, I have the latest software and Zlink versions. Is there a way to update Zlink OTA if a new version becomes available? I can go into the settings and check and it says I'm up to date, but just wonder if that's possible in the future. I've not done a ton of research, but what I have says Zlink licensing might be weird. This inconsistency is my biggest annoyance with the unit.
Unlike my old unit that just tapped into the factory screen, I can't long press the steering wheel phone button to activate the assistant. That's annoying. Have to do verbal commands only or use the touch screen button. Not the end of the world, I just got used to using the hard button.
Just like my other unit, the Audi console volume knob allows you to skip forward and back (by pushing sideways on the knob) just like the stock MMI, however, pushing it down only mutes audio. It does not behave like the MMI and pause streaming audio. So whatever you're listening to plays in the background during the mute. Annoying for podcasts and books. You can touch the screen, but having that hard button work would be nice.
This unit tries to emulate the HVAC temp changes that happen on the stock interface. Audi shows whichever side of the car is turning up or down the temp and what the setting is on the screen. However, this unit just puts up a graphic that instead of the temp shows "HI". So half done UI. My old unit had no HVAC interface at all when in Android mode.
I've still got the protective film on the screen right now until I take it back off to put in the stock bezel, but I could do with a bit brighter screen. It's not unreadable, but 20% brighter would be nice for sunny days.
Just like the old box I had for Android Auto, this one doesn't change the day/night mode on maps. You have to manually set it to dark or night if you want it to change depending on lighting conditions. At least it's easier to access in the menu now that I have a touch screen.
I logged into my Google account on the stock Android part of the unit to install a couple of apps (GPS tester, etc.). Somehow the thing deleted ALL my google contacts when the account synced up. I restored them from trash and could see the device that did it, so I know it's this unit. It was fine for a few days, then did it again. Might be when I connect to wifi at home to go to the Play store that it does it. Probably a setting to turn off sync, but I haven't looked into it yet.
It currently mutes Android Auto if I switch to one of the stock screen views except I think the backup camera. I think that it initially did it on the camera, but there's a setting to change that. I just need to find that for if I look at one of the other screens like drive mode.
Overall, the navigation speed is good enough. If I can get the auto-connect wifi cycling resolved, I'll feel a lot better. Would I buy this unit again? I might try one of the other brands honestly. Just because this one feels ALMOST there, but just cheaped out a bit on processor and screen. But if you get a good deal, it's totally functional with a few quirks.
The other brand I was considering seems to have more sales. That is Coika. Who knows if they're really the same thing from the same factory. Wouldn't be surprised, but it would be good to compare back to back. I'm just not going to do it Either of these options are half as expensive as RSNAV or some of the other more Audi forum prominent brands.
That in depth enough?
Conveniently the GPS cable arrived today that allowed me to tap into the car's GPS antenna. Big win if you ever want to use the built in navigation. Works great, although the cable I ordered is a bit tight. Now I can pull out the other GPS antenna that I had routed behind the glove box to go up the A pillar.
While installing, I googled B8.5 MMI GPS hookups to make sure I had the right cable off the back of the MMI unit. Apparently I wasn't exactly an original thinker, at RSNAV already offered these cables. This is the way to go and the AliExpress sellers should 100% include these instead of the full antenna that you have to mount somewhere.
Audi Original GPS Antenna Splitter Cable for S2, S3, S4
Audi Original GPS Antenna Splitter Cable for RSNAV S2, S3, S4 Android system on Audi Vehicles with Audi Navigation System only. - Best reception of GPS signal for your RSNAV S2,S3, S4 Android system - GPS hot start, super faster time sync - Work both for Audi MMI system and S2, S3, S4, This is...
rsnav.com
*I have not tested the stock nav yet, but I never use that anyway. I'll try to remember to look to confirm that's still working. Might be some kind of time interface into the car that it grabs from GPS, so it might still be important. I'll do it before I reinstall the dash. I just wired it enough to verify via the GPS testing app that it was better than the included antenna (it was).
Thank you Andy, much more detail than i expected.
Really appreciate the quick writeup esp the notes on the gps issue and getting a splitter.
Andy S said:
This probably is irrelevant as it doesn't affect Android Auto/CarPlay, which rely on the phone GPS. I'm just curious about the built in navigation and it wasn't a bunch to spend to try out.
Click to expand...
Click to collapse
Great review and very interesting because I'm looking at getting the same car. Just a small point, Android Auto does in fact use the car's GPS where possible. Waze uses the phone GPS but Google Maps and Sygic can use the car's GPS, for example.
Cutprods said:
Great review and very interesting because I'm looking at getting the same car. Just a small point, Android Auto does in fact use the car's GPS where possible. Waze uses the phone GPS but Google Maps and Sygic can use the car's GPS, for example.
Click to expand...
Click to collapse
I doubt it would in this case, as Zlink as I understand it is kind of a hack to make AA work. On a truly integrated solution, I'm sure you are right.
Andy S said:
I doubt it would in this case, as Zlink as I understand it is kind of a hack to make AA work. On a truly integrated solution, I'm sure you are right.
Click to expand...
Click to collapse
Works with the Headunit Reloaded app, that I use on my older PX5. I don't know if you can use that on your new HU? Zlink and Easy Connection never worked well for me.
Cutprods said:
Works with the Headunit Reloaded app, that I use on my older PX5. I don't know if you can use that on your new HU? Zlink and Easy Connection never worked well for me.
Click to expand...
Click to collapse
I might try it to see if it will solve my wireless issue. This is my first real Android head unit other than the pass through box I used before that isn't really a head unit. Is there a best way to install? Just from the Play store?
Heya, sorry I completely forgot to post about my Qualcomm 665 8/128GB Unit that I bought after putting it in.
Here's my thoughts:
Short TL;DR seems to be: Don't buy Nuuno or the other brands, according to BMW Forums get a Navifly Unit. (They seem to cost as much as the Nunoo or others but give far better configurability thanks to mods and seems to be more known):
The Configurations to look for seem to be Qualcomm 450/625 with 2GB/32GB or 4GB/64GB
For REAL Android 11 and from what I read even Android 12 it would be: 4/64, 6/128 or 8/256 (Look at the 6/128GB, all the other Units normally have 8/128GB)
Here's for more Information on how to get one and being sure that yours is legit and where I got this from (I hope XDA allows the Links, if not Google for "BMW KSW Android 10" and use f30.bimmerpost):
10.25" Android 10 HU discussion
10.25" Android 10 HU discussion
f30.bimmerpost.com
10.25" Android 9/10 HU theming and discussion
10.25" Android 9/10 HU theming and discussion
f30.bimmerpost.com
Android 11 HU discussion
Android 11 HU discussion
f30.bimmerpost.com
But since we're here about the Nuuno let me add some stuff about mine:
The Package with the radio arrived pretty swiftly and pretty much everything you need to tear apart my A6 4F was included.
Sadly the new Plastic Insert for the Radio/Dash is the wrong color (My older 4F uses a dark gray and the new one is silver like for the newer 4F) but that's not much of a issue, still looks good. BUT the fit is not that well done, it has quite a few bigger gaps all around compared to the original plastic. You tend to forget about it though the longer you have it in your car up to the point you won't even notice it yourself anymore or even care.
Same problems with GPS here, the Signal is pretty bad to okayish at best so also need to try to get the original GPS antenna connected but it's not a huge breaking deal since using Android Auto it still works well and I dont care about the built in one.
Android Auto Wireless is also iffy here, sometimes it tries to connect, the fails and never tries again until I disconnect and reconnect my Phones Bluetooth connection to the headunit, then it works first try. What also seems to help is immediately after the Unit is booted up opening the zlink app, Then it also seems to work 90% of the time for me. Wired Android Auto works 100% of the time.
Using the Steering Wheel Controls is perfectly fine, I can even skip songs ahead or go back with the left one that normally selects the Input. That is something my older Android Auto retrofit module couldn't do.
NEVER EVER LOG INTO YOUR MAIN GOOGLE ACCOUNT ON THESE "FAKE" OR OLDER UNITS. That is sadly a well-known practice in most of the Android Car Radio Forums since many seem to have that annoying bug that deletes your Contacts. The Navifly/KSW Android Radios seem to not have this/or it got fixed.
Better be safe and always use a throwaway account on these things.
The Muting Sound when going to one of the original Car Menus is pretty bad, or well on mine it doesn't actually mute, it stops playback. If I start the music again from my phone I can listen to my Music and go through the original Car Menus. It sadly aslo cannot be deactivated this "Feature". Only on the Navifly/KSW Units mentioned in the BMW Forums you seem to be able to do it which is probably why I will get me one of those. Hopefully I won't forget to write a bit about that one too.
Lastly the AC: On my MMI 2G 4F the Display shows the correct Temperature that I set on my AC in the Display..
I hope this also helped a bit since these Units don't seem to be well known about only or atleast reported biut if you look on Aliexpress they're pretty much the first 10 you get shown when looking for Audi
Thanks for the info @Darthsternie. Do either of those brands make a unit that works with Audis? I briefly looked and couldn't find anything. I hate to end up buying a third unit for my car, so I guess I'll keep this one for the time being. I just really want to get the wireless piece figured out.
I just went out and put my stuff back together to confirm the GPS splitter cable did not interfere with stock nav, and it doesn't. So whatever the car might use GPS for should still work. While doing that, I confirmed what Darthsternie said about switching to the stock interface, it does pause playback. Not just mute. I assumed that was correct, but wanted to confirm on my unit. Backup camera has an option to disable this, but if you go into anything else from the Audi MMI, it pauses.
Also, thanks for the info on the temp. I'm on the 3g MMI "High" on my 2016 S4 (B8.5). "High" I believe means has stock NAV. Might ask the company about my issue. To be honest, since I have the dual temps shown on the temp dials, it's not really something I care much about.
I did log out of my google account and used an abandoned account I used years ago for a specific purpose that I no longer need. Should have known better. My concern was for apps I may have purchased like Torque. Don't really want to buy again. Wonder if I can put my other account in my family? Will look up how many people can be in a family. I think I'm at 2 right now.
As to the wireless, once I get in a bad state where it's constantly looping the connection attempt, I've been unable to solve it without a reboot. I can kill Zlink. I can cycle bluetooth on the phone. I can manually navigate to Zlink, but that's not the problem because I can even auto-launch Zlink at start and it still does it.
Will have to investigate a replacement for Zlink if that's possible on these. I just haven't really dug into Android head units enough to know anything at this point. Need a good wiki or something
Navifly is not a guarantee either, they also sell snapdragons as well as MTK units, you want the legit snapdragon with the KSW software if you want to have a compatible unit with what most of the modders are using. I got mine a few years ago from Navifly and it is a P60 cpu MTK unit and it works well and gets the job done, but I would much rather have a KSW based unit.
I also have a B8.5 Audi.
You should download Device Info HW from the play store and it will give you a breakdown on the unit and let you know if they are faking the android version, etc.
Device Info HW - Apps on Google Play
Hardware and software information app for Android devices.
play.google.com
twist said:
Navifly is not a guarantee either, they also sell snapdragons as well as MTK units, you want the legit snapdragon with the KSW software if you want to have a compatible unit with what most of the modders are using. I got mine a few years ago from Navifly and it is a P60 cpu MTK unit and it works well and gets the job done, but I would much rather have a KSW based unit.
I also have a B8.5 Audi.
You should download Device Info HW from the play store and it will give you a breakdown on the unit and let you know if they are faking the android version, etc.
Device Info HW - Apps on Google Play
Hardware and software information app for Android devices.
play.google.com
Click to expand...
Click to collapse
Suspiciously, Device Info HW will install, but fails to run on launch. Will dig a bit more.
I finally heard back from these guys and got a screenshot. Here is the link for the unit.
https://www.aliexpress.us/item/3256803161214499.html?spm=a2g0o.cart.0.0.3a3738dazQvvo3&mp=1&gatewayAdapt=glo2usa
And here is the screenshot he sent. This is the newer KSW software and it should be a legit snapdragon 662.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Talking to these guys through their aliexpress translator is almost futile. I ended up sending him a screenshot with the APP Ver highlighted on a different older KSW unit and then he sent this back.
I have just bought this one for my Audi A6 C6 from 2005.
https://de.aliexpress.com/item/1005005240382533.html
I hope it's a real 662 Unit but according to the seller and a screenshot from them it is.
I will try to report back again when it arrives and compare it to the Nuuno Unit that I have now
Hi,
Ive just ordered 2 weeks ago a Nunoo 12.3 128+8GB device with Snapdragon 665 for my A5 B8 Pre-Facelift. Ive asked the seller to confirm if its really 665 and he did. I can also confirm, that my device have a 665 if i can trust CPU-Z this device info software shows also Android 12S. I dont know, if its better to have this MTK8581 CPU like on the COIKA devices or the Snapdragon 665. I just can say i was focused on the 665 because this is that, was RSNAV uses.
I had before an RSNAV S1, so the first generation in 10.25". This unit was also for sure not bug free and i switched it because it was now fully bricked. I got random bootloops and blackscreens, even after factory reset. My brightness control was buggy, it was inverted and dark at day and bright at night. Support from RSNAV haven't helped me with that. Finally, I also had no GPS reception any more. I had used the roof antenna from the A5 for the S1, without the splitter. However, as the roof antenna is a known problem and tends to break down overnight, I assumed that this problem had now also affected me. But that's not true, because the roof antenna now showed 15 satellites when connected to the MMI again After research, I found out that this was also a known problem with the RSNAV S1, that the GPS transistor burns out and that this is not repairable.
I don't have any further experience with the new Nunoo device yet, I need a few more days for that. I can report back then. What I noticed is that the frame that was sent to me has a much worse fit than the one I had with the RSNAV S1. Let's see if the support team can do something about that.
By the way, some people have already reported that the RSNAV firmware runs just as well on the Nunoo devices. I have not yet tried this out myself. However, this could fix some bugs and possibly bring a few more options.
RSNAV was a major rip off IMO, they are just selling the same Chinese units at a markup and the markup is not worth what little support you might get, that is just my opinion and I know many will disagree.
The snapdragon is going to be way better then the MTK I had an MTK previously and it worked fine but I was unable to change launchers or do anything outside of what they supply, the MTK units are super locked down and proprietary, the snapdragons have all kinds of fun mods and capabilities so you can really dial in your head unit how you want it to be.
I don't personally know anything about nunoo but these units are almost all made by Mekede / Navifly and being resold by multiple different stores just rebranding. I am sure there are some other companies making fake units, but a lot of the chinese stuff all comes from the same factory and then a ton of other companies rebrand them and resell them.
Even my previous Mekede MTK unit was fake android 10, it was really android 9, the fraud and scams on aliexpress is so unacceptable, which is why I buy very little there, these headunits were the only 2 purchases I have made on there in the last 2+ years.