Database Users

Hotaudio Model 2100: 2DIN 7" 1024x600 RK3066 Android 4.4.4

Hi Guys,
I've been searching but couldn't find info on this head unit. It looks like they upgraded the screen to 7" 1024x600 on an older dual core 1.6Ghz RK3066 to make a universal 2DIN unit. It seems to be a recently released model, looks like a nice unit for a good value.
Does anyone have this HU or know about it? Hotaudio seems to be the original manufacturer, is there a better known clone of this unit?
All I can find searching for "Hotaudio 2100" are some posts on a Russian forum:
https://www.drive2.ru/l/7069581/
https://www.drive2.ru/l/7031068/
They're on Aliexpress and Ebay:
http://www.aliexpress.com/item/Dual...ole-size-176mm-101mm-No-disc/32342857044.html
http://www.ebay.com/itm/1024-600-An...mm-176mm-7-inch-navi-radio-wifi-/251948090321
Any info or ideas?

Hi. This Hotaudio RK3066 - 1024X600 HU is considered a HuiFei type, so check out the thread below for more info:
http://forum.xda-developers.com/showthread.php?t=2660662
Here's another thread on this specific HA HU that could help too:
http://forum.xda-developers.com/and...in-s07-android-4-4-using-rk3066-root-t3155372
Also, below's a link to Malaysk's Custom Rk3066 - 1024X600 ROM Images that have worked well for me with this HU:
http://forum.xda-developers.com/showpost.php?p=58249825&postcount=7614
And here's a link the MCU images for BN-HA RK3066 / RK3188 specific models:
http://forum.xda-developers.com/showpost.php?p=61291848&postcount=14139
My opinion of this HA HU is that it's inexpensively made and not perfect. For example, I had to relocate the WiFi antenna out the back, as the factory location inside of the unit created a very weak signal. To clarify, moving the antenna lead out the back of the unit increased throughput up and down by at least 10x + on my unit. Moreover, my HA HU also has an input switching issue with my vehicle's factory amp that creates a single loud popping sound through the speakers when switching from music to radio inputs or when turning the vehicle off. That said, this issue was not present at all with a prior Winmark Android HU in the same vehicle. I even installed a RCA ground loop isolator - noise filter and made sure the ground was to chassis, but the input switching loud single popping sound is still a problem with this HU. I'm guessing it's an issue with how crudely this HU the switches power, which is unlike the soft power switch and volume ramp up of my last Android HU.
Another issue with many of these Android type head units including this one is the boot up time. It's at least 20-30 seconds, but you can set the HU shut down time delay up to two hours. Still, it's not equal to having an any time almost instant on HU like my last one.
All the above said, this HU is decent if you can find it for around $200 US, but I'd recommend going with something of higher quality if cost is not a big concern, or at the least look for one of these units or similar ones with the quad core RK3188 processor and good support.
Bottom line is that these units are inexpensively made IMHO, but they can be fun to work with; thanks to Malaysk and all the excellent XDA developers and contributors. Plus, I still have not found any higher quality brand names to date that run pure android, OBD2, and have as many other app options available.
Best to all,
R

Thanks a lot for your informative post rhacy.
My unit just came in and I was wondering if this was the WiFi antenna you relocated out the back?
There seems to be an adhesive copper antenna tab taped to the inside of the chassis near the screen at the front of the unit. If you route it out the back wouldn't it put the antenna further away from the seats where you'd want the stronger WiFi signal? Was the stock placement of your antenna the same way?
Your previous Winmark HU with the instant boot up time was a Windows CE unit with Android running in a VM, or was it pure Android? I've seen the option in xdAuto firmware for the Carpad HUs to set sleep delay for 1day, 2days so it will instantly boot as long you drive every few days. I wonder if we can do that on these HuiFei units somehow?
I've seen mention in the changelog of an adapter that addresses factory amp pop by introducing a delay before switching the input, at least during turn-on. Maybe using an adapter like this might address the issue?
http://www.pac-audio.com/firmware/RP/RP4-CH11.html
Release Notes for RP firmware
2/13/2015 Rev 1.5.4.4:
Adds Fusion
Separates Sony & Pioneer
Adds Alpine VR command
Factory amp turn-on delay slightly longer to avoid turn-on pop
Fixes LED problem without proper radio selection
Click to expand...
Click to collapse
Do you have Steering Wheel Controls working with your unit? Does your vehicle have resistive controls or canbus?
I'm going to hook mine up to power and test it out, will report any issues to this thread. Anyone who has one of these Hotaudio model 2100 please post your experience.

Hi rcll,
Your more than welcome and thank you for the heads up and link for an adapter that addresses factory amp pop by introducing a delay before switching the inputs, at least at amp turn on. Cheers!
Here's a link to one I found on ebay that looks like it may work in some instances:
http://www.ebay.com/itm/PAC-TR-4-Ca...gger-Module-/191226517960?hash=item2c85fd19c8
Moreover, I'll do some more research and try to find an adapter that can sense any input switch and soft switch the amp. Well... I will if the new Android HU I just purchased has the same single loud popping sound when switching inputs or turning off. The new HU is a Joying JY-UQ124 Quad Core RK3188 1024*600 16GB 2 DIN system. It was purchased because I missed having an actual volume knob and wanted to upgrade to a quad core as well as see if it would fix the loud single pop sound issue.
Please note that I have emailed Hotaudio multiple times over the last month or so about the loud single pop sound issue when switching audio inputs etc., and Summer has stated that they are working on the problem and will send me a fix if and when they figure it out.
Also, if it helps at all, the Hotaudio HU is installed currently in a 2003 Mitsubishi Montero Limited with the factory infinity amp, 6 speakers, and a Polk sub-woofer. It's a non CANbus and non SWC SUV. As I mentioned in my previous post, there were zero single loud popping noise issues with the Winmark Android HU that I installed in the Montero prior this HA HU. The Winmark has a gentle audio input switching and a nice soft volume ramp up on any input including the radio. It was listed as a Pure Android Single DIN HU with the pop out 7" 1024x600 display and it has worked well. I only replaced it because I did not like how far it stuck out of the dash even with the display in. Plus, the display had to pop out in order for me to see my reverse camera or access my nav apps and that got old real fast. Also, I was concerned that the display motor or its ribbon cable would fail eventually.
Here's a link to Winmark Pure Android 4.1 Single DIN HU:
http://www.alibaba.com/product-detail/Pure-Android-4-1-universal-1_60150935774.html
To clarify further, the Winmark Pure Android HU is instant on when using the android music player or radio, but it does take 10 seconds for the display to pop out and up. That said, I'm guessing that there must be a sleep or standby mode for the Mstar system that Rockchip does not deploy. Plus, I know for sure that the Mstar system does not need to boot up even when the Montero has sat for days or weeks without use.
In regard to the Hotaudio WiFi Antenna, yes, mine was in the exact same spot originally. However, mine did not come with an adhesive copper antenna tab at the end of the antenna lead on the side of the case. It was just soldered to the inside sidewall of case. Your unit may perform better with the copper tab, although, I think there will still be more interference due to the antenna lead being inside the case. On mine, the difference between the factory mounting location and the lead being routed out the back (through the rear mounting bracket hole and then attached to center upper rear housing screw) has been a massive improvement in both signal strength and throughput. If I was not pressed for time during the antenna fix, I would have taken pictures as well as mounted a RP-SMA Antenna on the back housing like the one in the link below.
2.4G 2.5dBI Wireless RP-SMA Antenna with Extension Cord Cheap hot sale
http://www.ebay.com/itm/171505160014?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
Further, I did ask Hotaudio for help with the ridiculously weak wifi signal and directly related low throughput issue, but they only suggested using a USB WiFi adapter instead of the internal WiFi radio. D'oh! And even then, there was no information on which adapter would work, or how to set it up, where to get the drivers, or where to get it. In turn, I pulled the HU, relocated the antenna lead, and tried to explain to them the poor factory antenna location problem. This was more than a month ago, so hopefully they are doing a better job on new units. Please note, my Winmark HU has the WiFi antenna routed out the back and it works great. Also, the forthcoming Joying HU routes the antenna out the back too, so hopefully it will work great as well. Anyway, if you're bench testing your HU prior to install, you can at least test the signal strength and throughput and compare it to your phone etc., and then decide if you need to reroute or not. Although, if you like to connect to home or work WiFi networks, I'd recommend relocating and upgrading the antenna.
Yikes... my apologies for type rambling...
Best to all,
R

rhacy said:
My opinion of this HA HU is that it's cheaply made and far from perfect. For example, I had to relocate the WiFi antenna out the back, as the factory location inside of the unit was poorly designed to save a few cents per unit. To clarify, moving the antenna lead out the back of the unit increased throughput up and down by 10x + on my unit. Moreover, my HA HU also has an input switching issue with my vehicle's factory amp that creates a single loud popping sound through the speakers when switching from music to radio inputs or when turning the vehicle off. That said, this issue was not present at all with a prior Winmark Android HU in the same vehicle. I even installed a RCA ground loop isolator - noise filter and made sure the ground was to chassis, but the input switching loud single popping sound is still a problem with this HU. I'm guessing it's an issue with how crudely this HU the switches power, which is unlike the soft power switch and volume ramp up of my last Android HU.
Click to expand...
Click to collapse
Did you ever solve the popping sound before you switched to the Joying? This is my second HotAudio unit, my first one had a power issue. They sent me a new one at no cost, but this has the speaker popping as you described. My first one did not have this issue. And no word from Summer yet. I really don't want to go through the hassle of shipping this one back and waiting another 2 weeks for a new one. Frustrating.

vdubskey said:
Did you ever solve the popping sound before you switched to the Joying? This is my second HotAudio unit, my first one had a power issue. They sent me a new one at no cost, but this has the speaker popping as you described. My first one did not have this issue. And no word from Summer yet. I really don't want to go through the hassle of shipping this one back and waiting another 2 weeks for a new one. Frustrating.
Click to expand...
Click to collapse
Hi vdubskey,
No... I haven't solved the Hotaudio single loud popping sound when switching audio inputs or turning off yet. On an encouraging note, Summer sent me a link to new ROM and MCU images yesterday should fix the single loud audio popping sound. I'm guessing the fix is in updated MCU audio switching assembly code, but I've already installed the Joying HU and it's been working great for the most part. To clarify, out of the box the Joying HU has zero audio pop issues, decent WiFi throughput, and is obviously faster due to the quad core. The only issue with it so far is low mic volume and some background buzzing noise for the person on the receiving end of my Bluetooth paired phone calls. D'oh! There always seems to be some issue with these head units.
Anyway, if Summer has not sent you the download link to the New4_rk3066_h(20150831) ROM & MCU images yet, you can pm me for the link. Please note that I'm going to email Summer and will post the link and password here if she gives me permission to do so.
Best to all,
R

I also bought this model and with the latest files from Summer, I noticed that the input pop sounds went away : ). Super happy about that
It is too bad I have to stick with the files from HotAudio/Summer so I won't have the popping sounds. This also means I won't be able to install the Malaysk's current custom rom as you will hear the popping sounds

butthead123 said:
I also bought this model and with the latest files from Summer, I noticed that the input pop sounds went away : ). Super happy about that
It is too bad I have to stick with the files from HotAudio/Summer so I won't have the popping sounds. This also means I won't be able to install the Malaysk's current custom rom as you will hear the popping sounds
Click to expand...
Click to collapse
I have this same HU and it has been nothing short of perfect for me. Try and update the MCU to the new (20150831) HA file and then put in Malaysk's ROM. The popping sound should be MCU related not ROM so you shouldn't have any problems.
I personally haven't updated my MCU yet so I still have that popping sounds, only the ROM to Malaysk's Aug24-2015 and it's running flawless. I bearly notice the pop anyways.

butthead123 said:
I also bought this model and with the latest files from Summer, I noticed that the input pop sounds went away : ). Super happy about that
It is too bad I have to stick with the files from HotAudio/Summer so I won't have the popping sounds. This also means I won't be able to install the Malaysk's current custom rom as you will hear the popping sounds
Click to expand...
Click to collapse
Great news. She just sent me a link with a firmware date of 09/09/2015 so hopefully it fixes it. Yea I appreciate all the work Malaysk has done but all of the UI changes done are not to my taste. The stock firmware looks much better IMO. I just extract the stock firmware images and rebuild with the modded apps I use and use then flash and apply *#hct#root# to root and install xposed and get the same experience with the same look as stock. Works for me [emoji6]
Sent from my Nexus 6 using Tapatalk

Summer at Hotaudio has given me permission to post the links below that should fix the single loud audio pop when switching inputs or when turning off.
Please note that these ROM Firmware images should be for 1024x600 Hotaudio Dual Core RK3066 & Quad Core RK3188 Head Units, but I haven't testing them yet, so use at your own risk.
Hotaudio Rockchip RK3066 8-31-15 ROM Firmware & MCU Images:
http://yunpan.cn/cm4nU7wHDzcuA password:2782
Hotaudio Rockchip RK3188 9-8-15 ROM Firmware & MCU Images:
http://yunpan.cn/cmtZjSvdtbqqv password:6389
Thanks in advance for any feedback.
R

Yup that's the firmware I downloaded, the 9/8/15 one. I upgraded to a quadcore SOM for this radio. I'll try the MCU image first and see if it solves my problem and then the UPDATE image if I need to. Should get these posted to the HuiFei file server as well. At least the MCU files anyways.
Sent from my Nexus 6 using Tapatalk

vdubskey said:
Yup that's the firmware I downloaded, the 9/8/15 one. I upgraded to a quadcore SOM for this radio. I'll try the MCU image first and see if it solves my problem and then the UPDATE image if I need to. Should get these posted to the HuiFei file server as well. At least the MCU files anyways.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thanks! Please let us know if the single loud audio pop goes away or not. Also, once you flash the MCU, could you post the MCU version number for the new RK3188 MCU from your Settings - about section?
Moreover, once I know the both the new HA RK3066 and RK3188 MCU version numbers, I'll see if I or someone can post them to the HuiFei and mega.nz file servers - ( https://mega.nz/#F!KMZnXTJC!zDFMlP4qgxEE6vQxt8rrrw ), or if you do, please let us know.
Thanks again.
R

The MCU that was included in the 3188 download is v2.73. And that is what my system already had prior. I am still getting the pop randomly when switching music and radio apps. Although I haven't got the pop on boot or shutdown yet except a very tiny one that might have been related to something else. I'll have to do some more testing.
Sent from my Nexus 6 using Tapatalk

Hey guys, I am a total noob when it comes to dealing with these android head units. I am wondering if anyone can tell me if there is any way to have music (I.e. Mp3, radio, or other sources) to play continually, or at least while I am in the Nav app. Riding in silence just to use the Nav is not cool....

vdubskey said:
The MCU that was included in the 3188 download is v2.73. And that is what my system already had prior. I am still getting the pop randomly when switching music and radio apps. Although I haven't got the pop on boot or shutdown yet except a very tiny one that might have been related to something else. I'll have to do some more testing.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Yikes! I updated to MCU 2.73 on my HA rk3066 about month ago and still had the single loud audio pop when switching inputs or turning off. Regardless, thanks for posting the MCU version. It's probably a waste of time, but I'll bench flash the MCU included with latest rk3066 ROM from Summer to see if it's newer than 2.73.
Bigjoe1025 said:
Hey guys, I am a total noob when it comes to dealing with these android head units. I am wondering if anyone can tell me if there is any way to have music (I.e. Mp3, radio, or other sources) to play continually, or at least while I am in the Nav app. Riding in silence just to use the Nav is not cool....
Click to expand...
Click to collapse
Try going into Settings > GPS and selecting Mixing. There, you can also adjust the volume settings between your music and gps voice directions. Please note that this GPS volume setting may not work if you're using a GPS app with text to speech street names.
Hope this helps...
Best to all,
R

butthead123 said:
I also bought this model and with the latest files from Summer, I noticed that the input pop sounds went away : ). Super happy about that
It is too bad I have to stick with the files from HotAudio/Summer so I won't have the popping sounds. This also means I won't be able to install the Malaysk's current custom rom as you will hear the popping sounds
Click to expand...
Click to collapse
Hey can you post the version number of the MCU that took the pop away. Also the firmware date? Is your unit a dual core or quadcore. Thanks.
Sent from my Nexus 6 using Tapatalk

Update: I went ahead and flashed the update.img after the MCU.img had no effect and it has resolved the speaker popping. So it turns out the even tho the MCU probably does handle the input switching, it must have been how the OS handled the execution. No facts to back that up but just my opinion. Now I have to mod this version all over again and setup my apps but oh well.
Sent from my Nexus 6 using Tapatalk

vdubskey said:
Update: I went ahead and flashed the update.img after the MCU.img had no effect and it has resolved the speaker popping. So it turns out the even tho the MCU probably does handle the input switching, it must have been how the OS handled the execution. No facts to back that up but just my opinion. Now I have to mod this version all over again and setup my apps but oh well.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thanks for posting that the latest Update Image from Summer at Hotaudio fixes the audio pop. I did bench load the included MCU for the HA rk3066. Unfortunately, it was version 2.60, so I knew it would not help. Thanks again for verifying the fix is the new firmware.
Cheers,
R

Another update: So the newest firmware fixes the pop when switching from radio to music and vice versa perfectly. Haven't had a pop yet. But I'm still getting a random pop here and there on ignition off. So I think I'm going to going to wire my DCDC-USB power supply in-between the unit and the battery so I can use the power off delay function to make sure my amp is powered off before the unit so I don't get the pop. Hopefully it works out.
Sent from my Nexus 6 using Tapatalk

Does anyone know how to get into recovery mode? This model doesn't have physical buttons but it still has the reset button. I tried going from maylask's to the original img. After flashing, it never booted successfully and now I'm stuck on the android logo screen. Any pointers ?

JY-UN138 - Joying 8" 2DIN Android 4.4.4

I ordered this from the CarJoying website.
https://www.carjoying.com/2-din-car...-bluetooth-dab-wifi-mirror-link-obd2-nfc.html
It took less than 1 week to arrive and it also had postage tracking details.
I installed this into my 2016 Toyota Fortuner (Australian model). Below you can see a picture of what the original head unit looks like. It's about 8-9 inches and I didn't want to install it using the original facia because there would be a very big gaping hole around the headunit. You can find 2Din facias on EBay and Aerpro webiste
Original headunit
https://www.dropbox.com/s/uepiirm0jptgdf7/IMG_20160618_120009.jpg?dl=0
2Din Facia
https://aerpro.com/fp8190
I didn't want to cut up the original wiring harness on the car so I bought the following harness from the Car Joying website. 3 of the plugs were not required for my car and I had to re-wire SWC1 and SWC2 into the correct wires
https://www.carjoying.com/joying-ha...-radio-installation-wiring-harness-cable.html
I also used this 24pin plug for the reverse camera. The Toyota camera uses 5V (not 12v). I had to tap this into the reverse wire in the wiring harness I bought. Like I said earlier, I didn't want to touch the car harness.
http://www.ebay.com.au/itm/272022582406
Picture: https://www.dropbox.com/s/dgb2px1a6jvxnvd/s-l1600.jpg?dl=0
I had to modify the original mounting brackets to remove the locating bumps so that it would fit the new head unit. I don't have pictures of what I did, but you can see the original mounting brackets here: https://www.dropbox.com/s/i9neetzctpu2h7p/IMG_20160618_134150.jpg?dl=0
Here's the finished result
https://www.dropbox.com/s/l13o8quj12ogstj/IMG_20160818_170302.jpg?dl=0
Some items of note with this head unit.
1.) I initially had some issues with install apps from the Play store. Something error about "Cannot install to SDCard or internal memory". I used a paper clip to reset the unit and it seems to have fixed it.
2.) Wireless signal strength is weaker than my older 7" 2Din Android 4.4.4 headunit. My other car has one like this https://www.carjoying.com/2-din-car...th-and-gps-navigation-rotate-menu-hd-800.html and it seems to get faster download speeds and signal strength.
3.) The launcher cannot be changed. You're stuck with 2 options only
4.) The "factory settings password" is 3368 - None of the information documented here - http://forum.xda-developers.com/wiki/Hui_Fei_Type#Factory_Settings_.22Passwords.22 is relevant to this new unit
5.) I much prefer the old menu system. If you watch here https://youtu.be/W-Q3qz0dgd0?t=377 you'll notice a separate app is launched to get to the headunit specific settings. In my other headunit, all these settings are embedded into the normal Android Settings App. This application has a lot of toggles for settings that have lost their translation from Chinese to English. None of toggles are documented so you'll find yourself switching stuff on/off trying to figure out what's changed.
6.) No root Unit can be rooted using Kingoroot. I used an older version but it worked
7.) All things aside, it's actually a very good head unit. I've only had it in for 1 day but it's done everything it's supposed to do
Here are some pictures of the system information
https://www.dropbox.com/s/6crr4toix2r37vw/IMG_20160818_193719.jpg?dl=0
https://www.dropbox.com/s/263m039qdt0mzmh/IMG_20160818_190826.jpg?dl=0

First post updated. I have root

Hi,
my Radio arrived yesterday.....
I've rooted the unit and installed Xposed (Youtube in background, Youtube Adaway, ....)
Everything is working good.
Now I am looking to install a custom Rom on it (DSA Rom)....lets see -> there is a problem with the MCU....its not compatible with the "other" Roms here on XDA

I found this website to have some useful info that is related to this unit
http://4pda.ru/forum/index.php?showtopic=738689&st=180
I used Chrome to auto-translate from Russian to English. It's not perfect, but it's good enough.
The videos here are also somewhat relavant
http://www.witson.com/en/introduce001.html?newsTypeID=100022485&newsType=Video F9XXX Android 4.4
Not sure of the ROMs/MCUs here are relevant, not willing to try yet
https://mega.nz/#F!OlpkjYIR!jHVYotE0fh3FJZKmFX9d7g

Not the same unit as yours, but my Joying has worked like a champ

poyz said:
I ordered this from the CarJoying website.
Here are some pictures of the system information
Click to expand...
Click to collapse
It seems i have the same mcu as you, my radio is a 10.1" screen single din.
Have you got a link that you used to root the device?
Im new to android and its all a bit foreign to me.
Ive just started a thread as i couldn't find any info on my unit and then i found your thread.
Things id like to change about my device is
- get rid of mute in reverse
- get rid of the car picture in reverse
- be able to play an apps (foxtel go) that says it won't play on a rooted device (if possible)
- increase the amount the screen can dim or be able to turn the screen off
does rooting allow you to change any of the above?
thanks
---------- Post added at 11:28 AM ---------- Previous post was at 11:24 AM ----------
poyz said:
I found this website to have some useful info that is related to this unit
Click to expand...
Click to collapse
how do you change your first link to english?

FR0GGY said:
Things id like to change about my device is
- get rid of mute in reverse
- get rid of the car picture in reverse
Click to expand...
Click to collapse
get rid of mute in reverse should be easy. Go to Settings and there is an option in there somewhere, I think it is Car Settings. There are options to Mute on reverse, or lower the volume, or just leave it regular. At least that is how my Joying works.
Not sure what you mean by get rid of car picture?

CadillacMike said:
get rid of mute in reverse should be easy. Go to Settings and there is an option in there somewhere, I think it is Car Settings. There are options to Mute on reverse, or lower the volume, or just leave it regular. At least that is how my Joying works.
Not sure what you mean by get rid of car picture?
Click to expand...
Click to collapse
yeah that option is there but it doesn't change anything the mute still works.
unfortunately i can't post links until I'm above 10 posts, seems you can't upload pictures here without a link. But there is a diagram of a car when the reverse camera comes on, I've been able to get rid of the reversing guide lines but not the car picture.

FR0GGY said:
Have you got a link that you used to root the device?
Im new to android and its all a bit foreign to me.
Ive just started a thread as i couldn't find any info on my unit and then i found your thread.
Things id like to change about my device is
- get rid of mute in reverse
- get rid of the car picture in reverse
- be able to play an apps (foxtel go) that says it won't play on a rooted device (if possible)
- increase the amount the screen can dim or be able to turn the screen off
.
Click to expand...
Click to collapse
If you're new to Android, I suggest you don't root it until you're familiar.
To answer your questions
1.) I've not tried, I like the music muted when I put it in reverse
2.) There is a setting in the Car Media Settings App. I'll find it and update this post
3.) I can't help you there, I don't have Foxtel Go.
4.) There is a Sleep functions in Settings->Display that will allow you to turn the screen off after X minutes of inactivity.

poyz said:
If you're new to Android, I suggest you don't root it until you're familiar.
To answer your questions
1.) I've not tried, I like the music muted when I put it in reverse
2.) There is a setting in the Car Media Settings App. I'll find it and update this post
3.) I can't help you there, I don't have Foxtel Go.
4.) There is a Sleep functions in Settings->Display that will allow you to turn the screen off after X minutes of inactivity.
Click to expand...
Click to collapse
4) yeah I think the minimum is 3 minutes was hoping for something less.

To remove the car picture when you put it in reverse, launch the Car Media Settings app, press the 3rd button from the left on the bottom row of options. Enter 3368 as the password, set the setting "Car Radar" to off.

poyz said:
To remove the car picture when you put it in reverse, launch the Car Media Settings app, press the 3rd button from the left on the bottom row of options. Enter 3368 as the password, set the setting "Car Radar" to off.
Click to expand...
Click to collapse
Thank you, joying actually responded with that today.
Also managed to get the volume working in reverse. There was two settings "reverse mute" or something like that had to be turned off and then there was a mute in reverse setting that had to be set high not low - reverse to what I thought.

Any updates on this unit, recieved my JY-UN138 yesterday
what is it ? MCTB or KYL ?
Looks like the interface for the 4PDA forum is the same but i'm not sure it's the same hardware

D3LTA said:
what is it ? MCTB or KYL ?
Click to expand...
Click to collapse
Neither
According to the system info menu it's JY_60_C6R_7706_5006_CAN(A)_Newlap
See picture https://db.tt/VMWBmyEN

yeah i know that.
Hope there will be some support for them in future
if anyone got a update please post it here

Does that mean, it is currently not possible to update this unit to 5.1.1 with Malaysk ROM? Just thought about ordering this one, but if it is not possible to upgrade to 5.1.1 then probably I will wait...
Also on the Joying page this unit is listed as "PX3 1.8GHz Cortex A9", while most (all?) other units are listed as "RK3188 1.6GHz Cortex A9". Is there a performance difference between these SoCs? What is your boot time with this unit?

Actually the performance is excellent, but indeed it's not upgradable with Android 5.1 now because of total different hardware, unit will die if u try what I have been told.

Official restore
Hello,
had some issues with the unit and seller send me new firmware
Check this and this video for update instructions

Thanks for that. Do you mind taking a picture of the Android version screen of you unit now that you have a different firmware?

Hi,
did you update the unit?
How can I update it? Via recovery?
I have some problems to boot in recovery mode :/
Best regards

Android unit for Ford S-MAX

Hi guys
I'm hoping to get some help from you with deciding head unit for my Ford S-Max. I'm doing a research about it but still a bit confused.
I have few units I'm looking at,
1. Ford specific Joying - JY-FL124N2 ( Android 5.1.1 Lollipop 2GB RAM Intel SoFIA 3GR , 4 Cores )
2. Universal Joying - JY-UL135N2 ( Android 5.1.1 Lollipop 2GB RAM Intel SoFIA 3GR , 4 Cores )
3. Ford specyfic Xtrons - PF75QSFAP-S ( Android 5.1 Lollipop 64 Bit Operating System Quad Core )
4. Ford specyfic Xtrons - PCD76QSFA-S ( Android 6.0 Marshmallow quad core Cortex A7 )
5. Ford specyfic Xtrons - PF70FSFS-S ( 800MHZ Cortex A7 Processor and latest WinCE6.0 )
I'm really into buying ford specific Joying with SoFIA, i was reading about it and plenty of people suggest to buy this one and all seems good but there is one big minus of it, there is no DVD slot (which isn't a problem) the problem is with 2 NOT working buttons 'eject cd' and 'dvd' which is very annoying and taking up the space... I've asked support if there is a chance to reuse (re-programme) those buttons for something else but got no response about that.
Anyway I like the Universal Joying unit the most, one volume knob, few buttons, looks much better then ford specific ones but there is a problem with wiring, its needed to get the harness etc from other source and whats worst connect all that to be working, steering wheels controls are the most stressful for me, and need to get some dash kit for installation. So I will end up with a frame in a frame (unit itself), so it will be very visible that this is a after market unit.
.
If you have any other suggestions please dont hesitate to say.
This will be used mostly for youtube, some movies for my kids, playing music from my phone (Xperia Z3), making calls, using internet from my phone or hotspots, navigation (probably google maps as i like them the most). I also want to get the rear camera with it
Any ideas welccome, thanks!
R

What year is your S-max? For the newer ones (post 2011or so) it's hard to change the OEM unit because the airco controls are integrated.
Johan
Verstuurd vanaf mijn SM-T580 met Tapatalk

JohanEe said:
What year is your S-max? For the newer ones (post 2011or so) it's hard to change the OEM unit because the airco controls are integrated.
Johan
Verstuurd vanaf mijn SM-T580 met Tapatalk
Click to expand...
Click to collapse
Hey Johan, thanks for asking...its 2006 Ford S-Max so its easy enough with those specific ones.
I was thinking about it and decided to use one of the specific ones, less hassle with installation and looks better, less after market. But Im not sure which one to pick, I dont have a big budget for this and would prefer to spend around € 200 on it but i dont want to be disappointed with how the unit works, i need it to work mostly with rear camera, playing music from my phone and simultaneously using navigation or playing videos in the back screens (when i finally buy them, plan for future), making calls, some youtube for kids during the trip...i just have enough of drained batteries in phones by 'wheels on the bus' songs lol

In my opinion, as a general rule you should pick up an unit with 2Gb of Ram and physical buttons.
A quad core is also recommended and to be honest I don't think that you need more then quad. There are some new units with octa but I haven't read more info and don't know if they worth the trouble.
Also I would pick a Ford specific unit because it fits perfectly in the dash compared to a standard 2DIN with various adapters that are not always up to standard most of the time.
Sofia looks like a good option, I am also interested in one... I began to read about it... I need to replace my 2 year old 3066 (KYD) unit.
I am mostly seeking it's instant on feature since I got tired of waiting for 30-40 seconds for my unit to boot each time I start my car.
Also I am not sure that you should opt for a CD unit since most don't use CD's anymore.... but that's up to you.
From my experience these aftermarket silver units are a different shade (brighter) of silver compared to the silver dash Ford elements.
nouserr said:
Hi guys
I'm hoping to get some help from you with deciding head unit for my Ford S-Max. I'm doing a research about it but still a bit confused.
I have few units I'm looking at,
1. Ford specific Joying - JY-FL124N2 ( Android 5.1.1 Lollipop 2GB RAM Intel SoFIA 3GR , 4 Cores )
2. Universal Joying - JY-UL135N2 ( Android 5.1.1 Lollipop 2GB RAM Intel SoFIA 3GR , 4 Cores )
Click to expand...
Click to collapse

edit said:
In my opinion, as a general rule you should pick up an unit with 2Gb of Ram and physical buttons.
A quad core is also recommended and to be honest I don't think that you need more then quad. There are some new units with octa but I haven't read more info and don't know if they worth the trouble.
Also I would pick a Ford specific unit because it fits perfectly in the dash compared to a standard 2DIN with various adapters that are not always up to standard most of the time.
Sofia looks like a good option, I am also interested in one... I began to read about it... I need to replace my 2 year old 3066 (KYD) unit.
I am mostly seeking it's instant on feature since I got tired of waiting for 30-40 seconds for my unit to boot each time I start my car.
Also I am not sure that you should opt for a CD unit since most don't use CD's anymore.... but that's up to you.
From my experience these aftermarket silver units are a different shade (brighter) of silver compared to the silver dash Ford elements.
Click to expand...
Click to collapse
Hey
Thanks for spending time to reply.
Yes i also decided to go with a Ford specific, i know the shade might be different but it will still look better then universal unit with frames...The only thing that is annoying is those 2 not working buttons...
It would be good enough if we can programme them but probably those are just blank covers without a button.

nouserr said:
Hey
Thanks for spending time to reply.
Yes i also decided to go with a Ford specific, i know the shade might be different but it will still look better then universal unit with frames...The only thing that is annoying is those 2 not working buttons...
It would be good enough if we can programme them but probably those are just blank covers without a button.
Click to expand...
Click to collapse
Glad I could help, I have a Mondeo (oval shape headunit unit) myself and exchanged quite a lot of headunits, I had 2 x 2DIN units and 2 x Ford specific ones. With the 2 DIN I had a hard tine finding adapters that fit perfectly but never got one with the right shade of silver or the perfect shape to accommodate the dash and the 2DIN unit... So I gave up on 2DIN units based on the adapters headache and overall look.
I mentioned that thing about the silver shade because you don't have this problem if you buy it black
Some people are bothered if it's not the same shade.
Yes, those 2 dummy buttons annoys me as well but there's nothing we can do... Overall the buttons layout is not for my liking. I would have preferred the standard android buttons on one side (back, home...) and multimedia buttons on the other side (play, stop...). But they tried really hard to cut the costs this time using old parts and completely cutting out the CD/DVD unit. For me the CD/DVD is useless because with all the streaming services I haven't touched an CD in the last 3 years. The DVD player in the car is also useless for me... when I drive I need waze/gmaps/igo/here and PlayerPro/XiiaLive Pro.
The Sofia unit needs a little modding from what I have read... you definitely need to stop the killing app service, install Viper4Android because the 3 band default EQ is really poor in general... and probably many more... still reading on the problems the unit has and the workarounds.
One thing I can say for sure.. if it weren't for the XDA forum and all these great people I would never consider buying an Chinese unit because out of the box it's pretty poor software wise.

nouserr said:
I'm really into buying ford specific Joying with SoFIA, i was reading about it and plenty of people suggest to buy this one and all seems good but there is one big minus of it, there is no DVD slot (which isn't a problem) the problem is with 2 NOT working buttons 'eject cd' and 'dvd' which is very annoying and taking up the space... I've asked support if there is a chance to reuse (re-programme) those buttons for something else but got no response about that.
Click to expand...
Click to collapse
Hi all.
I've recently bought the Joying EU-JY-FL121N2 model, so it fits for a bit newer Modeo/S-max/Focus. In my model there is a dvd slot but it's blanked (not as in the pictures of the hu on the Joying website). The most important thing for you may be the fact that the 'dvd' and 'eject' buttons do work, they just don't do nothing on default. With the
Joying 2GB - Steering wheel key customization - V4 (NO KILL)
mod I am able to use them. I can't be 100% sure that there is the same situation with the other models but I suppose that in fact it is.

[email protected] said:
Hi all.
I've recently bought the Joying EU-JY-FL121N2 model, so it fits for a bit newer Modeo/S-max/Focus. In my model there is a dvd slot but it's blanked (not as in the pictures of the hu on the Joying website). The most important thing for you may be the fact that the 'dvd' and 'eject' buttons do work, they just don't do nothing on default. With the
Joying 2GB - Steering wheel key customization - V4 (NO KILL)
mod I am able to use them. I can't be 100% sure that there is the same situation with the other models but I suppose that in fact it is.
Click to expand...
Click to collapse
Can you please take a picture of your unit and show us how it looks... the pictures from the website are old renderings that had the CD slot removed in Photoshop. I would like to see a real picture if possible.
Let me get straight you managed to remap those buttons to do something else with the help of the mod "Joying 2GB - Steering wheel key customization - V4 (NO KILL)"?
Thank you !

edit said:
Can you please take a picture of your unit and show us how it looks... the pictures from the website are old renderings that had the CD slot removed in Photoshop. I would like to see a real picture if possible.
Click to expand...
Click to collapse
Here you go. The whole unit first:
drive.google.com/open?id=0B7ILN8lhPUkFLWxMcVdyNDZQUGM
And now the picture of the "dvd slot". I shot it with flash so you can see there is no hole:
drive.google.com/open?id=0B7ILN8lhPUkFYXFCNEQxbGZyckk
Let me get straight you managed to remap those buttons to do something else with the help of the mod "Joying 2GB - Steering wheel key customization - V4 (NO KILL)"?
Click to expand...
Click to collapse
That is exactly what I did. In my unit I've got the following codes:
31 - DVD button
32 - EJECT button
33 - MEDIA button
34 - RADIO button

[email protected] said:
Here you go. The whole unit first:
drive.google.com/open?id=0B7ILN8lhPUkFLWxMcVdyNDZQUGM
And now the picture of the "dvd slot". I shot it with flash so you can see there is no hole:
drive.google.com/open?id=0B7ILN8lhPUkFYXFCNEQxbGZyckk
That is exactly what I did. In my unit I've got the following codes:
31 - DVD button
32 - EJECT button
33 - MEDIA button
34 - RADIO button
Click to expand...
Click to collapse
Thank you VERY much for the feedback. The pictures are great. They differ a lot from what they posted ... Surprise! the DVD slot is still there... only that is blocked... hmm.....
I pictured that they at least get rid of the slot and the side lights (that I presume that they still lit the fake cd slot)... kinda sloppy decision.... eh... whatever....
The unit looks good... I am definately getting one.
1. Since I have an Mondeo and I will be getting the exact same unit I gotta ask if everything went fine as for some units there are problems with steering wheel buttons (vol up and down, next, prev) especially the M button in the middle (you can't configure it to do anything)? Do they work ok?
2. Did you encounter problems at start (the unit start command, power on, is sent through CAN and actually interpreted and enable by the chinese CAN decoder) ?
3. Does the instant power on feature works ok?
4. The unit hardware buttons backlight colour match the car dashboard?
5. Is the screen bright enough?
6. At night does it dimm enough or do you need to use some software to dimm it even more? (like I feed the need on my unit, if I turn down the brightness even if it goes prett down I still feel the need to make my screen even darker for those white background apps like Google Play Music)
Thank you !

edit said:
1. Since I have an Mondeo and I will be getting the exact same unit I gotta ask if everything went fine as for some units there are problems with steering wheel buttons (vol up and down, next, prev) especially the M button in the middle (you can't configure it to do anything)? Do they work ok?
Click to expand...
Click to collapse
I was able to get the steering wheel buttons work. I only use those on the left side, but all of them work: vol up/down, next/prev and the 'M' button. In my case the wheel buttons work with connecting 'KEY2' wire - sorry but I don't remember details right know - it is described in the manual from Joying (which is included with the HU). At start after cutting some wire I connected it from the wrong side with the KEY2 one, but then I've noticed a youtube clip
youtube.com/watch?v=QaJqWy9Tk24
and did the same way, but I had to stay with the canbus decoder connected (the only difference from the method shown above).
2. Did you encounter problems at start (the unit start command, power on, is sent through CAN and actually interpreted and enable by the chinese CAN decoder) ?
Click to expand...
Click to collapse
I don't quite understand what you've wrote in brackets - I haven't noticed any weird behaviour with starting the unit.
3. Does the instant power on feature works ok?
Click to expand...
Click to collapse
Yes, it does actually. I don't know much about the battery drain - I've got the unit for a week only. But I've seen somewhere in the forum statistics of the processor activity during the night and it was almost 100% deep sleep so I'm hoping it's ok.
4. The unit hardware buttons backlight colour match the car dashboard?
Click to expand...
Click to collapse
Essentially, yes. In more details: I've set up the red colour (the option of changing colour is visible only with car's lights on - not that much obvious to me) and in the daylight it looks a bit pale - you can see it on the pictures I gave. But when it's dark they look very nice to me - the same or almost the same colour as on the dashboard.
5. Is the screen bright enough?
Click to expand...
Click to collapse
We haven't had many sunny days during the last week, so I may only say - I can see what's on the screen, but I don't think I'm going to use it to watch movies - radio, music, bluetooth, maps - for now it's all I need.
6. At night does it dimm enough or do you need to use some software to dimm it even more? (like I feed the need on my unit, if I turn down the brightness even if it goes prett down I still feel the need to make my screen even darker for those white background apps like Google Play Music)
Click to expand...
Click to collapse
I can't tell anything about that to be honest, this is to check yet. I'm not very sure but I think that the 28 march update brought some more options for backlight of the screen (but it may have been there before also).

I ordered it just now, hope it goes well !
Thank you for all the feedback !
---------- Post added at 12:47 PM ---------- Previous post was at 12:09 PM ----------
[email protected];71748303
Yes said:
Did it start instantly each day or there were days when it booted slowly?
Click to expand...
Click to collapse

edit said:
Did it start instantly each day or there were days when it booted slowly?
Click to expand...
Click to collapse
I didn't notice the last question, so maybe the answer is for other people right now - I haven't got any cold boot yet.
Sent from my D5803 using XDA-Developers Legacy app

[email protected] said:
I didn't notice the last question, so maybe the answer is for other people right now - I haven't got any cold boot yet.
Sent from my D5803 using XDA-Developers Legacy app
Click to expand...
Click to collapse
That is nice to know... I am hoping that my unit will be here in the next 2-3 days... and then it's mod time... lots of work
Have you hard moded yours to add additional cooling to the unit (heatsinks or fans) or did you let it stock? Have you noticed cpu throttling ? Have you checked the CPU temp? (not sure how users checked it out, probably with an app)
Don't know if I will mod my unit, I am not ready to give up the warranty from day 1.

edit said:
Have you hard moded yours to add additional cooling to the unit (heatsinks or fans) or did you let it stock? Have you noticed cpu throttling ?
Click to expand...
Click to collapse
AFAIK people here have got some throttling during cpu stress (some benchmarks I think) - I use the unit for listening to the radio, music, phone calls and navigation, for now at least. I don't think those actions will stress the hu at all or maybe in some small amount - I hope so at least...
Have you checked the CPU temp? (not sure how users checked it out, probably with an app)
Click to expand...
Click to collapse
I haven't done this with the unit, but in my phone I've used cpuz. I think there are plenty of such kind of apps in Play store which even don't need root.
Don't know if I will mod my unit, I am not ready to give up the warranty from day 1.
Click to expand...
Click to collapse
Right now I'm not ready to do any hardware mod and surely I don't feel I need one.

[email protected] said:
AFAIK people here have got some throttling during cpu stress (some benchmarks I think) - I use the unit for listening to the radio, music, phone calls and navigation, for now at least. I don't think those actions will stress the hu at all or maybe in some small amount - I hope so at least...
I haven't done this with the unit, but in my phone I've used cpuz. I think there are plenty of such kind of apps in Play store which even don't need root.
Right now I'm not ready to do any hardware mod and surely I don't feel I need one.
Click to expand...
Click to collapse
What is your CAN bus settings? I am really struggling with my CAN bus. My S-Max headlights are blinking when parked. I would love to know what settings you are using.

Iscariot76 said:
What is your CAN bus settings? I am really struggling with my CAN bus. My S-Max headlights are blinking when parked. I would love to know what settings you are using.
Click to expand...
Click to collapse
What kind of headlights do you have? In my car there are h1/h7 bulbs and I can't see any kind of blinking.

I managed to solve my issue by cutting the wire on the alarm sensor pin in the plug between my car and HU.

PX5 FYT 4+32GB Head Unit from Joying - Improvements & Upgrades

Hi everyone,
Due to the lack of (and dispersed) information about these particular head units, here's a thread where we can discuss and help each other out to make the most of these units. Please note this thread is not for Sofia or MCDB/C/D/E units, there are ample threads about those. I am not a full-time software developer, so please do correct me if you think I'm wrong about something. Please do think twice before experimenting on your unit, no one else is responsible for it but yourself. I'm also dying for a custom ROM, if there's any dev making one for these, please know I'm availing my unit for experimentation. It is a powerful Unit which unfortunately is plagued by software problems which is why I believe a dev can make a better job than the manufacturer.
Also, special thanks to @surfer63 for his Joying Extra Tools (JET apk) which has been a critical tool for rooting, among other things.
I will be taking the unit out of the car and opening it up to install a heat sink and take some pictures of the insides, let me know if anyone's interested in close-ups of anything on the board.

{Reserved for Hardware}
The unit was advertised as compatible with BMW X5 and E39 (5series 1996-2001). My car is a 1997 520i with the low-end dashboard so that's the context I'll be speaking in. The unit shipped complete with adapter cables which connect to the original connectors for the radio, magnetic GPS antenna, external mic (more on the internal mic later), 2 USB ports which are permanently attached to the unit (as well as an sd card slot), a couple of flimsy brackets which screw in place of the original radio holder. However 2 screws which attach the unit to the brackets were not provided and i had to rummage around until i found 2 screws that fit. Unfortunately the original radio antenna cable on the car doesn't fit the unit, however the bundle of cables has an antenna plug with it, it's just a matter of replacing it (someday, as I don't really use radio at all).
The Unit is reporting to have an ARM64-v8a architecture and an rk30sdk board, 4GB RAM as well as 32GB of internal storage. External storage is detected almost immediately as well and I had no problems with files stored on a pendrive. The CPU tends to run hot, occasionally going beyond 80degrees Celcius, I therefore have a small fan and heatsink ordered which I will try to squeeze into the single-DIN box. Worth mentioning it has buttons and a knob on either side of the screen which are backlit and positively responsive. Regarding the in-built microphone, it "works" in theory, ie. it hears you if you tap on it, but it doesn't hear my voice even with the engine idling, let alone cruising down the autobahn. Fortunately it comes with an external mic, I'll hook it up when I pull it out for the fan job.

{Reserved for Software}
This is the latest ROM & MCU update from the manufacturer:
Android Version: 8.0.0
Build number: px5-userdebug 8.0.0 OPR5.170623.007 eng.bsp.20181107.190240 test-keys
System info: APP 1024x600 2018-11-23 08:48:14
MCU Version: 2018-11-23 16:12:28 JY_(R68*)__26_C26_CAN(All)
BT Version: BLINK_8723DS_RELEASE/2018:10:08:17:05:26
DigitalAmp Version: Unknown
CAN Version: Unknown
Serial Number: 00000000
I'm not going to give the Wifi Mac address for obvious reasons.
Cold boots are pretty quick, it's usually done in half a minute. It has a rudimentary "recovery" mode which is achieved by pressing the reset button with a needle 3 times, and after a pause, a countdown is shown under the boot logo, at which point one has to insert the SD card into the right hand slot. If it identifies the ROM on the SD card as equivalent or better, it starts flashing. If it doesn't recognise it, it does apparently nothing and leaves you with a black screen until you remove the SD card and boot it up again.
I have on several occasions attempted to flash TWRP recovery image as well on the unit, with no success.

Description of operation & issues:
Ever since the latest ROM Update, I've been having issues with the WiFi: despite the dozen wifi hotspots around the neighbourhood including my phone and home wifi, the unit doesn't "see" any until I completely reboot it.
The ROM provided by the manufacturer doesn't have a proper bluetooth menu. Despite being equipped with Bluetooth 4.0, as it stands for now, there is no proper bluetooth menu like you get on your phone/tablet/etc... a bluetooth app shortcut does open this menu but the menu doesn't offer any options or work at all except for the on/off toggle.
The CPU runs hot, it is a well known issue and I'm intending to install a heat sink and fan on it.
Several other settings menu items usually found on phones are also missing.
There buttons of course are lit up but the colour options are just 7. There is no way to choose your own colour and I don't know of any app that can do it on this particular model.

So I've opened up the unit and took some pictures before i stuck on a few small heatsinks on the FYT6026 bigger metal heatsink as well as a small fan. I've not taken pictures of what I've done, but you can all suppose how it's set up. It's pretty easy. I've got more closeups of the board for whoever wants to see them, just ask.

Hey @surfer63 or @gtxaspec @xxRaiyanxxYT do you know what the connector circled in red (4 pins) is for? It was not connected to anything in my unit. The other 2 are USB (5 pins) and the one on top (2pins) is microphone.

Sorry didnt upload for some reason.

Kyle M. said:
Sorry didnt upload for some reason.
Click to expand...
Click to collapse
Connect those Plugs Red, Green and Blue

Wondering that myself... Could it be power for a fan?
I have the same unused plug in mine.
Any info would be appreciated
Cheers,

xxRaiyanxxYT said:
Connect those Plugs Red, Green and Blue
Click to expand...
Click to collapse
What? No you didn't understand. I disconnected the plugs before i took the picture to get a clearer view of the board. The 2 plugs in the Blue circle are both for USB cables that go out from behind the unit, and the green one is for the external microphone which I also use. The one I don't know about is the one in the red circle. it was not connected to anything when I opened the unit and I'd like to know what it might be useful for.

Junior_1967 said:
I have the same unused plug in mine.
Any info would be appreciated
Cheers,
Click to expand...
Click to collapse
I was thinking the same thing, I was going to hook the fan up to them but I needed to measure the voltages across those pins and my car is downstairs in the basement and I don't have a proper kit to power the it up on the bench. I would've made one but I was in a hurry yesterday. I need a whole day to mess around with it properly and find out what each part does but right now I'm working through the weekends until the end of the year. Until I get some time like that, I'm trying to gather some more info about it so I won't take it out for nothing (it's a ***** to install this unit back in the car).

Kyle M. said:
I was thinking the same thing, I was going to hook the fan up to them but I needed to measure the voltages across those pins and my car is downstairs in the basement and I don't have a proper kit to power the it up on the bench. I would've made one but I was in a hurry yesterday. I need a whole day to mess around with it properly and find out what each part does but right now I'm working through the weekends until the end of the year. Until I get some time like that, I'm trying to gather some more info about it so I won't take it out for nothing (it's a ***** to install this unit back in the car).
Click to expand...
Click to collapse
I will see what I can do.. Running my unit on the bench right now with a CPU power supply...
Might be able to test it tonight.. If not it will go to this weekend I'm afraid..

Junior_1967 said:
I will see what I can do.. Running my unit on the bench right now with a CPU power supply...
Might be able to test it tonight.. If not it will go to this weekend I'm afraid..
Click to expand...
Click to collapse
Good stuff, that'd be great, thanks! Which unit have you got? (specs) And have you managed to change the bootloader or flash a custom rom on it? Feel free to share pics of the motherboard.

Kyle M. said:
Good stuff, that'd be great, thanks! Which unit have you got? (specs) And have you managed to change the bootloader or flash a custom rom on it? Feel free to share pics of the motherboard.
Click to expand...
Click to collapse
I have the JY-HOS01P4
8.8" 4GB/32GB
No Hardware button at all. Not reset hole.. nada (Will make it easier to weatherproof.. )
Will at some point put a heatsink on it.. But being single DIN the room is limited...
So far I have only have it rooted and JET installed on it.
I do not think I will mess with the bootloader/custom ROM as it does pretty much what I want out of the box.
Testing different software now.
And the unit will be installed in my HD Roadglide.
So basically the sound output will be 2 fold:
Speakers driven by an external AMP so I can shut of sound by turn the amp off thru the settings
Bluetooth comms headset connected to a bluetooth transmitter taking it's input from RCA jacks
My requirements are the following:
Launcher: CarWebGuru
Radio -> will use stock app
MP3 -> Still testing players but for now I'm happy with google play music
GPS -> Osmand+ with data on SD card
Phone-> Android Auto + Headunit Reloaded (will finish testing and probably will buy.. Do not link ZLink.. even thought it works sort of ok) At this point I'm able to dial/see the phone on the radio and hear/talk with my BT headset
That is pretty much it.. Might attempt to put a DVR at some point...
I'll take a pic tonight of the board but aside from the location of that big capacitor (Mine is beside the wall of the radio) it is pretty much the same as yours.

Junior_1967 said:
I have the JY-HOS01P4
8.8" 4GB/32GB
No Hardware button at all. Not reset hole.. nada (Will make it easier to weatherproof.. )
Will at some point put a heatsink on it.. But being single DIN the room is limited...
So far I have only have it rooted and JET installed on it.
I do not think I will mess with the bootloader/custom ROM as it does pretty much what I want out of the box.
Testing different software now.
And the unit will be installed in my HD Roadglide.
So basically the sound output will be 2 fold:
Speakers driven by an external AMP so I can shut of sound by turn the amp off thru the settings
Bluetooth comms headset connected to a bluetooth transmitter taking it's input from RCA jacks
My requirements are the following:
Launcher: CarWebGuru
Radio -> will use stock app
MP3 -> Still testing players but for now I'm happy with google play music
GPS -> Osmand+ with data on SD card
Phone-> Android Auto + Headunit Reloaded (will finish testing and probably will buy.. Do not link ZLink.. even thought it works sort of ok) At this point I'm able to dial/see the phone on the radio and hear/talk with my BT headset
That is pretty much it.. Might attempt to put a DVR at some point...
I'll take a pic tonight of the board but aside from the location of that big capacitor (Mine is beside the wall of the radio) it is pretty much the same as yours.
Click to expand...
Click to collapse
Ah I see, so what they're doing is basically hooking up a different screen to the same single-din box. Have you had any issues with the wifi since the last update?

Kyle M. said:
Ah I see, so what they're doing is basically hooking up a different screen to the same single-din box. Have you had any issues with the wifi since the last update?
Click to expand...
Click to collapse
I have not seen any issues.. Mind you I only have an internal network.. Still waiting for internet to be installed ^%@%#
I had to hotspot my phone for connectivity when needed but it is chewing my data!!!
I did all my downloads from work and brought the files/apk home to install.
What kind of issues are you seeing?
Which version of the latest do you have? the first 2018-11-7 or the 2nd 2018-11?
(I hate how the have they same file name.. Joying is pretty bad naming stuff...)

Hi,
I tested the header last night and got nothing. 0 power
Now, I have not had the time to play with the settings in the radio so I do not know if something would turn that on.
Cheers,

haven't tested it myself, but from my memory this red-circled connector has something to do with audio (either Ins or Outs).

Here is the picture of the inside of the single DIN unit
https://www.dropbox.com/s/dnf4p64l5a1gizc/20181212_202622.jpg?dl=0
Cheers

Junior_1967 said:
Which version of the latest do you have? the first 2018-11-7 or the 2nd 2018-11?
(I hate how the have they same file name.. Joying is pretty bad naming stuff...)
Click to expand...
Click to collapse
I didn't realise they published the 2018-11. I downloaded the previous update, 2018-11-7. I think they published the second one after the first november update gave us issues and somehow forgot to put the full date on it. I'll try flashing that update at some point and see what happens.

Dasaita 10.2" head unit visualizer and other quirks

Hello, everyone.
I bought a Dasaita 10.2" Android head unit for my Jeep about a year ago. Love the Android functionality. However, it's got some quirks. I am hoping someone can give me some guidance on them.
I'll start with (hopefully) the simplest:
1) Visualizers don't ever work. That's unfortunate, but such a large head unit with a nice screen. Is there a setting somewhere that might make them work?
2) Sometimes when I first start the vehicle, the default (and crappy) mp3 player starts up automatically. I never use it, but can't uninstall it. There must be a hidden setting somewhere that tells the unit to start this app, but I can't find it.
3) Someone said I could view the backup camera even when not backing up. I changed the settings like another thread said, or I thought I did, but I never get any video from the backup camera unless I'm actually in reverse.
4) Only about 3 times now, it has frozen when I back up, and when I am moving forward again, it still shows the last view, a frozen snapshot, from the backup camera. No controls work. It must be restarted to get that camera view off the screen.
5) I see firmware updates on XDA, but am not sure how to tell which one is for my device. I can't post a link to the one I bought from Amazon, but the description says this: "Dasaita 10.2 inch Large Screen Unviersal Double Din Car GPS Stereo 4G+32G OCTA-Core Chip For Jeep Wrangler 2015 2016 2017 With Blutooth Wifi Car Audio 8G Meomery Card"
6) 3 USB connectors, but only 1 seems to work. When I asked support about it, Quick said to use the one that works because it is "more stable." Is there another purpose for the other two?
7) I didn't use the external mic for Bluetooth, and although Bluetooth works and I can hear people fine, people complain every conversation that they can't hear me. Even if I'm sitting parked. I finally gave up on Bluetooth. Is the included mic a lot better? Apparently it's unusable for me as-is.
Overall, I love the functionality and can't imagine going back to a standard head unit. Would like to just fix these quirks. If you have a fix for any of them, please let me know!
Thanks,
Brian