Rollback to MM From Nougat B35 - ZTE Axon 7 Questions & Answers

I've googled till my fingers are numb, read until my eyes bled and I'm certainly not a noob by any means. I've tried using DrakenFX rollback zip and get error 8 in twrp . With the Community ROM base zip it installs but won't boot. Any suggestions? I am of course talking device specific for A2017U. I appreciate any advice.

bob24260 said:
I've googled till my fingers are numb, read until my eyes bled and I'm certainly not a noob by any means. I've tried using DrakenFX rollback zip and get error 8 in twrp . With the Community ROM base zip it installs but won't boot. Any suggestions? I am of course talking device specific for A2017U. I appreciate any advice.
Click to expand...
Click to collapse
You need to provide more info than just "error 8". What else does it say besides that? You can take a screenshot in TWRP just as in a ROM. Use TWRP's Advanced menu to save the recovery log just after getting the failure. Attach or link it here but do not paste it here.
Which TWRP are you using?
ZTE Axon 7 A2017U, AospExtended v4.6 ROM, Radioactive v2.4 Kernel, microG (NoGapps), Multiboot, XDA Legacy

marcdw said:
You need to provide more info than just "error 8". What else does it say besides that? You can take a screenshot in TWRP just as in a ROM. Use TWRP's Advanced menu to save the recovery log just after getting the failure. Attach or link it here but do not paste it here.
Which TWRP are you using?
ZTE Axon 7 A2017U, AospExtended v4.6 ROM, Radioactive v2.4 Kernel, microG (NoGapps), Multiboot, XDA Legacy
Click to expand...
Click to collapse
I appreciate the response. I'm at work but will recreate my problem again and pull the log when I have a moment after work. Thanks again.

bob24260 said:
I appreciate the response. I'm at work but will recreate my problem again and pull the log when I have a moment after work. Thanks again.
Click to expand...
Click to collapse
Well, why not:
-use an official MM package (if you are on stock ROM with stock recovery)
-EDL back to MM with EDL Tool or MiFlash
-avoid going to MM?

Related

TWRP for woods?

the link for the twrp img in on of the threads isn't online. I needed a twrp version 3 for the XT1760 Mediatek variant of the Moto e4.
Will try to upload
I needs it
I needs it like a non lactose intollerant person needs cheeeeeezeeee.
Francesco Franz said:
Will try to upload
Click to expand...
Click to collapse
DrunkenPanda2000 said:
I needs it like a non lactose intollerant person needs cheeeeeezeeee.
Click to expand...
Click to collapse
ok.
I will make my own twrp port for Moto E4
You have to wait till this upcoming sunday
DrunkenPanda2000 said:
I needs it like a non lactose intollerant person needs cheeeeeezeeee.
Click to expand...
Click to collapse
Doesn't the one in resurrection remix work? I think it's in the .zip if you extract it.
https://forum.xda-developers.com/mo...-remix-unofficial-based-t3691399/post74221659
madbat99 said:
Doesn't the one in resurrection remix work? I think it's in the .zip if you extract it.
https://forum.xda-developers.com/mo...-remix-unofficial-based-t3691399/post74221659
Click to expand...
Click to collapse
Is that not a rom and not TWRP?
DrunkenPanda2000 said:
Is that not a rom and not TWRP?
Click to expand...
Click to collapse
It says they have a twrp too. Try asking in that thread. Or try @KevMetal telegram group. They seem to have stuff going on for you guys. He posted links all over the place.
madbat99 said:
It says they have a twrp too. Try asking in that thread. Or try @KevMetal telegram group. They seem to have stuff going on for you guys. He posted links all over the place.
Click to expand...
Click to collapse
WHen i do fastboot flash recovery recovery.img i get a report on max downloadsize and when i reboot and try the recovery i get the android on his back with no commands displayed again so i gues it doen't work?
madbat99 said:
It says they have a twrp too. Try asking in that thread. Or try @KevMetal telegram group. They seem to have stuff going on for you guys. He posted links all over the place.
Click to expand...
Click to collapse
the guys just dont read anymore ...:silly:
Sent from my woods_f using XDA Labs
---------- Post added at 02:52 PM ---------- Previous post was at 02:51 PM ----------
DrunkenPanda2000 said:
WHen i do fastboot flash recovery recovery.img i get a report on max downloadsize and when i reboot and try the recovery i get the android on his back with no commands displayed again so i gues it doen't work?
Click to expand...
Click to collapse
ROOT&RECOVERY&ROMS
*custom recovery, modified boot & root flash tool:
-download tool
-run tool as admin
-this tool lets you unlock bootloader , flash modified boot , flash twrp
https://mega.nz/#!AgI1mZQB!SPAbos52kWWPbnAKEfWXaFg8rV7-dpfZGMl9YjW2gVY
*return to stock :
-download twrp flashable STOCK rom zip
-flash in twrp
https://mega.nz/#!poAwQSQT!xEYpF81TljAO0YTfOYPHInVt9zXbyjJ_34t4kMkPWkk
*nvram brick :
-download nvram and nvdata to flash via SPFLASHTOOL for corrupted nvram
https://mega.nz/#!RogTBaKb!o1q2BtJGHQZo4QmDh8ODvvMDyk-SkCMTTGEDH2c57kg
https://mega.nz/#!t55izA7K!sg46YmWxND0t41bj-QvKw4ly4_SyuHT5S0ZZmFWBlo4
*extraz :
noverity
-use this file if you don’t use modified boot image
https://mega.nz/#!l8YxCDqY!EGe7_tVctHRbu96nhffP5JIlNvZEL08eFIvbtFkezug
scatter
-use this scatter file if you need to flash files in SPFLASHTOOL or you need the blocks location
https://mega.nz/#!R4QQDSJS!NkG2Ls1iMKjM_VpPWiKgr_RTFojd3W7uXM3eAwfHqC0
*SP STOCK ROM :
-exactly what is says ..full stock rom with scatter ( russian zone )
-flash via SPFLASHtool
https://www.mediafire.com/file/45wpn5dcyz9wbmj/MOTOROLA_E_NMA26.42-75_ROW.7z
*Roms;
GAPPS;
http://opengapps.org/
Lineage 14.1 by CarlosArriagga
https://androidfilehost.com/?w=files&flid=234866
Donate Carlos
https://www.paypal.me/CarlosArriagaCM
AospExtended by Darklord4822
https://yadi.sk/d/909bmZ_X3P2wkM
Lineage 14.1 by Darklord4822
https://yadi.sk/d/BfbMumUk3Ni7cp
RR by Zormax
https://yadi.sk/d/MJh3nPF33NVyHY
ColtOs by koDE_61 aka @izaqKull aka iykeDROID aka
https://androidfilehost.com/?fid=817906626617940688
afh folder of koDE_61 aka @izaqKull
including all his work for moto e4
AICP , AIM , AOSCP , ViperOS, XenonHD, RR ,Flyme( not booting ), stock
https://androidfilehost.com/?w=files&flid=224632
Lineage 15 aka Oreo WIP BETA BETA by koDE_61 aka @izaqKull aka iykeDROID aka
https://androidfilehost.com/?fid=889964283620769638
LATEST & GREATEST ROM OFFICIAL AND MAINTAINED BY
@izaqKull with most recent security patches DotOs
https://sourceforge.net/projects/do...T-N-v1.1-20171119-woods-OFFICIAL.zip/download
*updated TWRP 3.2.1-0 by @izaqKull
https://androidfilehost.com/?w=files&flid=228046
*SPFLASHTOOL
http://spflashtool.com/download/SP_Flash_Tool_v5.1628_Win.zip
*Drivers
http://download1000.mediafire.com/z.../Miracle+Driver+Installation+Windows+8_10.exe
Links&Credits
http://lenovo-forums.ru/forum/836-moto-e-xt1762-kastomnye-proshivki/
http://www.stupdroid.com/2017/09/stock-rom-Moto-E4.html?m=1
nvram fix thanks Zormax
http://lenovo-forums.ru/topic/23654...t1762/&usg=ALkJrhgzfawydFakSCe4Yyqr_iemkQl3tQ
Credits
thanks ...
Darklard4822 , CarlosArriaga, Zormax, iykeDROID
Sent from my woods_f using XDA Labs
---------- Post added at 02:56 PM ---------- Previous post was at 02:52 PM ----------
Exactly what the title says . We have one officially maintained ROM and many unofficial ROMs . There are 3 guys trying to do something in respect to Oreo and still lots of chatter on the wire so come join this and let's skip a level up to Oreo .
https://t.me/joinchat/G3XDFEO7AR4fGdyBRfwVOw
http://telegra.ph/woods-development-01-07
Sent from my woods_f using XDA Labs
THx allot Dudes !
Not working
Ok so the tool's arent working for me and i'm pretty sure i'm not doing anything wrong.
(also i'm not installing that chat programm)
It keeps returning me a max download number and the recovery doesn't change i dont get twrp.
WHat does happen after flashing the recovery is that my phone is returned to factory settings.
Annyone got anny clue?
DrunkenPanda2000 said:
Ok so the tool's arent working for me and i'm pretty sure i'm not doing anything wrong.
(also i'm not installing that chat programm)
It keeps returning me a max download number and the recovery doesn't change i dont get twrp.
WHat does happen after flashing the recovery is that my phone is returned to factory settings.
Annyone got anny clue?
Click to expand...
Click to collapse
you are SURELY doing wrong :silly:
*the most common mistake is restarting the phone after flashing recovery ...then bootloader overwrites your new recovery with stock recovery
make sure to boot directly to twrp recovery after flashing
your phone returning to factory / wipe is ONLY caused by unlocking bootloader NOT flashing recovery ......
its very simple ..in the tool folder there is .txt file that says read me ..READ IT ! ...it tells you exactly what needs to be done .....
or perhaps Pandas shouldnt drink ....
Sent from my woods_f using XDA Labs

PSA: The project treble generic build of lineage OS works great on the Honor 7x.

The only things broken are live display and auto brightness. Here's the link: THREAD
Pretty impresive for a generic image. Our Android phones are becoming like PCs.
Edit: Nothing is broken in v4.
triggerlord said:
The only things broken are live display and auto brightness. Here's the link: THREAD
Pretty impresive for a generic image. Our Android phones are becoming like PCs.
Click to expand...
Click to collapse
Does Bluetooth streaming work? i noticed that was one of the items not working on the AOSP GSI Rom...Are you using it as a daily driver?
I have just purchased an Honor 7x and live in the UK, I have emailed huawei concerning my unlock code im still waiting could you kindly tell me which TWRP image you used and what rom I need to flash i.e a or b
vuittion said:
I have just purchased an Honor 7x and live in the UK, I have emailed huawei concerning my unlock code im still waiting could you kindly tell me which TWRP image you used and what rom I need to flash i.e a or b
Click to expand...
Click to collapse
No need for TWRP I believe, fastboot will suffice. Also the phone has the A-only partition type, not A-B.
smokinjoe2122 said:
Does Bluetooth streaming work? i noticed that was one of the items not working on the AOSP GSI Rom...Are you using it as a daily driver?
Click to expand...
Click to collapse
if it is in the same condition as the lineage OS on then no. normal pairing for file transfer works tho
imHadees said:
No need for TWRP I believe, fastboot will suffice. Also the phone has the A-only partition type, not A-B.
Click to expand...
Click to collapse
unlock bootloader + fastboot system.img?
Or just fastboot system.img?
am wondering which custom ROM to use, GSI or the Resurrection build here....... (ok i see RROS here already included Huawei camera but user say it's buggy)
Can i install Huawei camera? it works with the dual camera for bokeh effect right?
optionalmgrr.la said:
unlock bootloader + fastboot system.img?
Or just fastboot system.img?
am wondering which custom ROM to use, GSI or the Resurrection build here....... (ok i see RROS here already included Huawei camera but user say it's buggy)
Can i install Huawei camera? it works with the dual camera for bokeh effect right?
Click to expand...
Click to collapse
Unlock the bootloader, factory reset from recovery, flash system image from fastboot, factory reset from recovery, then reboot. Also make sure that you have upgraded to EMUI 8 / Android 8. I only tested the stock GSI.
So I've been testing this for awhile. I can't find anything broken. Plus the live display and auto brightness features are fixed in v4. I don't have Bluetooth headphones to test that but I did test a Bluetooth controller and it works fine. It's worth noting that the openkirin team are working on this rom (or at least their patches get merged in) so it probably has newer patches and fixes that aren't in the ROMs on this forum.
Some screenshots.
triggerlord said:
Some screenshots.
Click to expand...
Click to collapse
Have you tried the new RR?
allrockedout said:
Have you tried the new RR?
Click to expand...
Click to collapse
The one for the 7x or the GSI?
triggerlord said:
The one for the 7x or the GSI?
Click to expand...
Click to collapse
New ppsh gsi RR? I'm using aosp gsi right now everythings working perfect with magisk installed. But I want to know if you tried gsi rr with gapps and root. Because I hear people having issue installing gapps ?
allrockedout said:
New ppsh gsi RR? I'm using aosp gsi right now everythings working perfect with magisk installed. But I want to know if you tried gsi rr with gapps and root. Because I hear people having issue installing gapps ?
Click to expand...
Click to collapse
Well it has all the same patches. I'm using opengapps and magisk on lineage so it should work. I haven't tested it though
Sent from my Honor 7X using XDA Labs
triggerlord said:
Well it has all the same patches. I'm using opengapps and magisk on lineage so it should work. I haven't tested it though
Click to expand...
Click to collapse
Open gapps micro or nano? Just was reading a lot of people don't have enough space in that partition and can't install gapps. Also did you install system img in twrp and flash gapps in twrp?
allrockedout said:
Open gapps micro or nano? Just was reading a lot of people don't have enough space in that partition and can't install gapps. Also did you install system img in twrp and flash gapps in twrp?
Click to expand...
Click to collapse
I'm using opengapps pico. Yes I flashed everything in trwp back to back without rebooting.
Sent from my Honor 7X using XDA Labs
triggerlord said:
I'm using opengapps pico. Yes I flashed everything in trwp back to back without rebooting.
Click to expand...
Click to collapse
K thanks I'm going to try that
allrockedout said:
K thanks I'm going to try that
Click to expand...
Click to collapse
One more thing. If you have a slow LTE connection, you can fix that by installing kernel auditor and setting the TCP mode to Reno. Then it'll be back to full speed. (In misc.)
Sent from my Honor 7X using XDA Labs
triggerlord said:
One more thing. If you have a slow LTE connection, you can fix that by installing kernel auditor and setting the TCP mode to Reno. Then it'll be back to full speed. (In misc.)
Click to expand...
Click to collapse
Thanks again I'll check that out
How much sot you guys are getting guys?
And is volte working with this rom?
triggerlord said:
So I've been testing this for awhile. I can't find anything broken. Plus the live display and auto brightness features are fixed in v4. I don't have Bluetooth headphones to test that but I did test a Bluetooth controller and it works fine. It's worth noting that the openkirin team are working on this rom (or at least their patches get merged in) so it probably has newer patches and fixes that aren't in the ROMs on this forum.
Click to expand...
Click to collapse
How is performance vs stock EMUI? I'd be interested on how this hardware performs without the extra skin on top.

OnePlus 5 Treble - Android P Setup

Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul
anshul1123 said:
Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul
Click to expand...
Click to collapse
Have a look at the guides section https://forum.xda-developers.com/oneplus-5/how-to/android-p-coming-to-5-5t-year-t3787602
anshul1123 said:
Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul
Click to expand...
Click to collapse
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE
Pho3nX said:
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE
Click to expand...
Click to collapse
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?
archer797 said:
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?
Click to expand...
Click to collapse
yes, still required
Hey guys I'm looking into flashing all this, but can you guys tell me what doesn't work? What are the differences with custom roms?
From what I understand, it's similar to a custom ROM in terms of camera (not fully working), in terms of volte (doesn't work).
I'm willing to test but since it takes a lot of time on my side (need to fully backup etc...), I hope it works fine
Also, the gsi is the lastest version now that official P is out?
Sent from my OnePlus5 using XDA Labs
matssa said:
Hey guys I'm looking into flashing all this, but can you guys tell me what doesn't work? What are the differences with custom roms?
From what I understand, it's similar to a custom ROM in terms of camera (not fully working), in terms of volte (doesn't work).
I'm willing to test but since it takes a lot of time on my side (need to fully backup etc...), I hope it works fine
Also, the gsi is the lastest version now that official P is out?
Click to expand...
Click to collapse
You should ask rom related things in the rom thread https://forum.xda-developers.com/pr...-android-p-developer-preview-t3816659/page116
I am on open beta 15. I saw this video of formatting data, then installing mokee rom, mounting vendor and installing gsi image of dp5 of android p.
Things seemed pretty easy.
I did the exact steps. I am stuck at a point where i can't find vendor option in mount of twrp.
Could someone guide me on what can de done?
cosmic077 said:
I am on open beta 15. I saw this video of formatting data, then installing mokee rom, mounting vendor and installing gsi image of dp5 of android p.
Things seemed pretty easy.
I did the exact steps. I am stuck at a point where i can't find vendor option in mount of twrp.
Could someone guide me on what can de done?
Click to expand...
Click to collapse
Change twrp. I use blu spark twrp and if i remember right it's name had treble
Vika__ said:
Change twrp. I use blu spark twrp and if i remember right it's name had treble
Click to expand...
Click to collapse
Thanks bro. Lets see if that helps. I saw two videos and both used different twrps.
Today i ll try with blu spark treble twrp.
Lets see if it works.
is volte working ?
On PR1 i have one bug. When send screen to my Anycast , find it and when i select it show "connecting" but never connect. When try connect i see bright up and go to lock screen but don´t send image. Anymore have this problem ?. Any idea to solved it ?. I tried diferent kenels, update mokee vendor base , add entries to build.prop refer to this problem, ..... . Thanks.
Chnages on PR1 over DP5
Pho3nX said:
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE
Click to expand...
Click to collapse
Can you get some link detailing the Changelog about PR1, I am trying to find the changes in PR1 over DP5.
I treid DP5 on Oneplus 5 and it was still Highly unstable, Video Call feature missing without DUO, Front camera not workng in Ported Google Camera, and many other problems like only LTE no VoLTE support yet. So I am looking for changelog of PR1. ( or you could just mention few changes)
abhinav.kakku said:
Can you get some link detailing the Changelog about PR1, I am trying to find the changes in PR1 over DP5.
I treid DP5 on Oneplus 5 and it was still Highly unstable, Video Call feature missing without DUO, Front camera not workng in Ported Google Camera, and many other problems like only LTE no VoLTE support yet. So I am looking for changelog of PR1. ( or you could just mention few changes)
Click to expand...
Click to collapse
It's not an official OnePlus release, it's a ported rom, you have to expect problems.
djsubterrain said:
It's not an official OnePlus release, it's a ported rom, you have to expect problems.
Click to expand...
Click to collapse
I know that, Official will take much time now. Hope there is improvement over DP5
apparently we can use VOLTE fix from mi4 on our device
can anybody verify that ?
Android P PR1 stuck on Boot Loop to recovery on Oneplus5
I have followed the steps, Wipe device,
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery.
abhinav.kakku said:
I have followed the steps, Wipe device,
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery.
Click to expand...
Click to collapse
With wipe device you mean formatting data right? After completing mokee set up when you reboot to recovery swipe to factory reset and then flash A image and so on
seniug said:
With wipe device you mean formatting data right? After completing mokee set up when you reboot to recovery swipe to factory reset and then flash A image and so on
Click to expand...
Click to collapse
Agreed your steps need to be:
I have followed the steps, Wipe device, format data
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery
---------- Post added at 08:03 AM ---------- Previous post was at 08:00 AM ----------
archer797 said:
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?
Click to expand...
Click to collapse
Does anyone know what purpose the Mokee ROM portion of the setup serves on a technical level? Also has anyone noticed that the front camera works on snapchat but not in the google cam port? interesting stuff.

[GUIDE] How to boot RR 7.0 GSI on Mi Max 3

Hello everyone, I followed the RR GSI group about it and many couldn't boot RR 7.0. This guide was created especially for those who could not boot RR 7.0. Go!
This guide is also suitable for flashing a GSI that does not boot. (Like AEX, PixelDust ...)
You should have an UNLOCKED BOOTLOADER and TWRP Recovery (I Recommend TWRP by Nijel8 - https://forum.xda-developers.com/mi-max-3/development/recovery-twrp-3-2-3-1-nitrogen-t3866084)
Instructions how to boot RR 7.0:
1)Full wipe (system,data,vendor, dalvik,cache,internal storage) + format data.
2)Flash No-verity-opt patch + EU developer on 8.1 oreo or EU Stable 10.2.1.0.
3)Factory reset
4)Reboot to recovery
5)Flash POST-sGSI_3_v0.6 .zip
6)Flash RR System.img
7)Flash Magisk 18.0
8)Reboot to system
9)Setup system
10)Reboot to recovery
11)Flash BiTGApps or OpenGapps (Recommended) + Magisk 18.0
12)Reboot to system
Enjoy
Download BiTGapps: https://official-bitgapps-com.webnode.com/the-band/
Download RR 7.0 GSI (arm64-aonly): https://get.resurrectionremix.com/?dir=gsi
Download: no-verity-opt patch - https://t.me/nitrogencloud/271
Download POST-sGSI_3_v0.6 .zip: https://t.me/nitrogencloud/269
Can I flash EU 8.8.30 (Full ROM) on the global 10.2.1.0
arecky said:
Can I flash EU 8.8.30 (Full ROM) on the global 10.2.1.0
Click to expand...
Click to collapse
Yes you can
Regards
Sent from my MI MAX 3 using XDA Labs
after flash RR-O and everything will be ok, yes. No problem with ARB?
I have global 10.2.1.0 now I want try RR 7.0
Global 10.2.1.0 >EU 8.8.30>RR 7.0 is ok
I think that wipe system will brick the phone............
arecky said:
after flash RR-O and everything will be ok, yes. No problem with ARB?
I have global 10.2.1.0 now I want try RR 7.0
Global 10.2.1.0 >EU 8.8.30>RR 7.0 is ok
Click to expand...
Click to collapse
You can directly use 10.2.1.0 eu, follow instructions and reflash 10.2.1, I used it and it boot fine.
palalos81 said:
I think that wipe system will brick the phone............
Click to expand...
Click to collapse
No, if you follow the instructions and flash every files, no problem. Work with stable eu 10.2.1.0 too.
Regards
Good day. After installing RR 7.0, the Kernel Adiutor program shows a battery capacity of 3400 mah instead of 5500 mah. Can this be fixed?
bocha79 said:
Good day. After installing RR 7.0, the Kernel Adiutor program shows a battery capacity of 3400 mah instead of 5500 mah. Can this be fixed?
Click to expand...
Click to collapse
Happen with many gsi, it's not a big problem in my opinion.
Regards
What is POST-sGSI_3_v0.6 .zip, what does it?
What is No-verity-opt patch, what does it?
Why flash Magisk18.0 two times?
Can base Global-Dev ROM 9.1.17, too? Why Global stable?
Why
I am on AOSP 9.0. Do I really need to flash the eu-rom and all the rest (POST sgs, no-verity-opt patch too?
@Skyllery
Can you please make some screenshots of the RR UI on the Max 3? I like to see it... still waiting for bootloader unlock on my Max 3.
btw: Great to see someone here who is into modding/flashing! :good:
Skyllery said:
You can directly use 10.2.1.0 eu, follow instructions and reflash 10.2.1, I used it and it boot fine.
No, if you follow the instructions and flash every files, no problem. Work with stable eu 10.2.1.0 too.
Regards
Click to expand...
Click to collapse
Me too, but when i flash magisk 18, it still boot, then go to the launcher, it shutdown and reboot to recovery
Lecterr said:
What is POST-sGSI_3_v0.6 .zip, what does it?
What is No-verity-opt patch, what does it?
Why flash Magisk18.0 two times?
Can base Global-Dev ROM 9.1.17, too? Why Global stable?
Why
Click to expand...
Click to collapse
Post sgsi is a fix for mtp as far as I know
No verity is to disable encryption everywhere
You only need to flash it the first time. Would work fine.
And no boot only with Oreo vendor. Don't ask why dunno
Feenfleisch said:
I am on AOSP 9.0. Do I really need to flash the eu-rom and all the rest (POST sgs, no-verity-opt patch too?
Click to expand...
Click to collapse
Yes everything is needed. If you don't flash eu After wiping you don't have vendor files. Don't need to boot it (MIUI) reboot directly to recovery and follow steps after this one.
Consider to join telegram groups just type mi max 3 on telegram.
Regards
Sent from my MI MAX 3 using XDA Labs
JustDroidIt-XDA said:
@Skyllery
Can you please make some screenshots of the RR UI on the Max 3? I like to see it... still waiting for bootloader unlock on my Max 3.
btw: Great to see someone here who is into modding/flashing! :good:
Click to expand...
Click to collapse
For sure check attached files
chetchuakaka said:
Me too, but when i flash magisk 18, it still boot, then go to the launcher, it shutdown and reboot to recovery
Click to expand...
Click to collapse
You installed magisk manager ? Don't happen here and don't see on telegram group neither. Supposing you correctly followed instructions.
Consider join mi Max 3 telegram group just type this on search bar on this app. More support
Regards
Sent from my MI MAX 3 using XDA Labs
Cannot view or download the images: 404 not found.
Hi,
Followed the guide to the toe...
On reboot, I have the RR splash screen but it is stuck there
Will have to stick to MIUI or one of it's derivatives
Thanks anyways...
Regards.
JustDroidIt-XDA said:
Cannot view or download the images: 404 not found.
Click to expand...
Click to collapse
Sorry it's buggy don't know why. Join the telegram group there's many Ss even on the channel
Regards
Sent from my MI MAX 3 using XDA Labs
Thank you very much for your great guide!
RR rom is my best rom
but in my case, youtube video is not working
GoodHuman0817 said:
Thank you very much for your great guide!
RR rom is my best rom
but in my case, youtube video is not working
Click to expand...
Click to collapse
You used which miui as base ? Restored apps ?
It didn't happen here using vanced or official app or chrome. Maybe wipe dalvik and cache or reinstall app.
BTW for bt fix replace files in vendor. Nikita forget to share the file here. It's the same as the others. Search on guide forum for it can't send it through xDA lab
Regards
Sent from my MI MAX 3 using XDA Labs
Skyllery said:
You used which miui as base ? Restored apps ?
It didn't happen here using vanced or official app or chrome. Maybe wipe dalvik and cache or reinstall app.
BTW for bt fix replace files in vendor. Nikita forget to share the file here. It's the same as the others. Search on guide forum for it can't send it through xDA lab
Regards
Sent from my MI MAX 3 using XDA Labs
Click to expand...
Click to collapse
Thank you for your answer.
I did the installation in the same way as this thread.
And I installed using the file from this thread. (EU 8.8.30, etc.)
I used 'phh-trebble-pie-fixes.zip' to brightness fix (https://forum.xda-developers.com/mi-max-3/how-to/guide-android-9-pie-aosp-phh-treble-rom-t3862708)
And I tried to change 'BiTGApps' to 'official openGapps Stock', 'official openGapps micro', and 'official openGapps nano'.
But the result was the same.
It works fine in chorme. but doesn't work on official youtube app and vanced app.

Flashable stock rom through twrp?

I am currently on the nusantara project android 11 custom rom on my zenfone max m2 and i want to revert back to stock rom for personal reasons.
Is there a flashable stock rom by any chance? I've searched everywhere on how to revert back from custom rom to stock rom with this device and found no leads up until now. Well, one that doesn't involve a pc that is.
I am no professional in flashing, but i can follow the instructions. My greatest thanks for anyone who could help me. Maraming salamat.
Charuzu said:
I am currently on the nusantara project android 11 custom rom on my zenfone max m2 and i want to revert back to stock rom for personal reasons.
Is there a flashable stock rom by any chance? I've searched everywhere on how to revert back from custom rom to stock rom with this device and found no leads up until now. Well, one that doesn't involve a pc that is.
I am no professional in flashing, but i can follow the instructions. My greatest thanks for anyone who could help me. Maraming salamat.
Click to expand...
Click to collapse
Hope this will help u
stock-a10-rom: GDRIVE LINK: STOCK A10 ROM for X01AD
NB: No Need To Edit Updater Script
Flash Guide : •
Download The File
Wipe Data cache system Vendor
Flash Stock ROM
Flash Magisk
Flash Dm-Verity
Reboot
Saif Stark said:
Hope this will help u
stock-a10-rom: GDRIVE LINK: STOCK A10 ROM for X01AD
NB: No Need To Edit Updater Script
Flash Guide : •
Download The File
Wipe Data cache system Vendor
Flash Stock ROM
Flash Magisk
Flash Dm-Verity
Reboot
Click to expand...
Click to collapse
Thank you very much.
I have downloaded the rom already but i don't get the "NB: No Need To Edit Updater Script". What does that mean?
The flash guide is clear to me, but i forgot what "Dm-Verity" was. I think i flashed something like that before but i really forgot about it. Where can i download it?
Thank you for being patient with me
Charuzu said:
Thank you very much.
I have downloaded the rom already but i don't get the "NB: No Need To Edit Updater Script". What does that mean?
The flash guide is clear to me, but i forgot what "Dm-Verity" was. I think i flashed something like that before but i really forgot about it. Where can i download it?
Thank you for being patient with me
Click to expand...
Click to collapse
Dm -verity here
Saif Stark said:
Dm -verity here
Click to expand...
Click to collapse
Help, what do i do?
Charuzu said:
Help, what do i do?
Click to expand...
Click to collapse
I used https://pitchblackrecovery.com/x01ad / (I don't know if there is such a function in TWRP)
You just need to activate this item in the settings, and everything will be stitched
of.tigler said:
I used https://pitchblackrecovery.com/x01ad / (I don't know if there is such a function in TWRP)
You just need to activate this item in the settings, and everything will be stitched
Click to expand...
Click to collapse
I don't have that option
How do i install your recovery? Can i flash it through twrp? Sorry, please be patient with me
Charuzu said:
I don't have that option
How do i install your recovery? Can i flash it through twrp? Sorry, please be patient with me
Click to expand...
Click to collapse
Yes, you just need to flash the archive that the link. And restart in recovery
of.tigler said:
Yes, you just need to flash the archive that the link. And restart in recovery
Click to expand...
Click to collapse
I tried flashing the latest twrp instead and it worked! (still no treble thingy option but it flashed the rom this time). Though i also think that if i flashed the pitch black recovery, it would've worked as well. So thank you very much still!
Also, my greatest regards to @Saif Stark for the rom, instructions, and the dm verity file.
I have achieved my goal because of you two. Thank you very much.

Categories

Resources