Hello everyone, I followed the RR GSI group about it and many couldn't boot RR 7.0. This guide was created especially for those who could not boot RR 7.0. Go!
This guide is also suitable for flashing a GSI that does not boot. (Like AEX, PixelDust ...)
You should have an UNLOCKED BOOTLOADER and TWRP Recovery (I Recommend TWRP by Nijel8 - https://forum.xda-developers.com/mi-max-3/development/recovery-twrp-3-2-3-1-nitrogen-t3866084)
Instructions how to boot RR 7.0:
1)Full wipe (system,data,vendor, dalvik,cache,internal storage) + format data.
2)Flash No-verity-opt patch + EU developer on 8.1 oreo or EU Stable 10.2.1.0.
3)Factory reset
4)Reboot to recovery
5)Flash POST-sGSI_3_v0.6 .zip
6)Flash RR System.img
7)Flash Magisk 18.0
8)Reboot to system
9)Setup system
10)Reboot to recovery
11)Flash BiTGApps or OpenGapps (Recommended) + Magisk 18.0
12)Reboot to system
Enjoy
Download BiTGapps: https://official-bitgapps-com.webnode.com/the-band/
Download RR 7.0 GSI (arm64-aonly): https://get.resurrectionremix.com/?dir=gsi
Download: no-verity-opt patch - https://t.me/nitrogencloud/271
Download POST-sGSI_3_v0.6 .zip: https://t.me/nitrogencloud/269
Can I flash EU 8.8.30 (Full ROM) on the global 10.2.1.0
arecky said:
Can I flash EU 8.8.30 (Full ROM) on the global 10.2.1.0
Click to expand...
Click to collapse
Yes you can
Regards
Sent from my MI MAX 3 using XDA Labs
after flash RR-O and everything will be ok, yes. No problem with ARB?
I have global 10.2.1.0 now I want try RR 7.0
Global 10.2.1.0 >EU 8.8.30>RR 7.0 is ok
I think that wipe system will brick the phone............
arecky said:
after flash RR-O and everything will be ok, yes. No problem with ARB?
I have global 10.2.1.0 now I want try RR 7.0
Global 10.2.1.0 >EU 8.8.30>RR 7.0 is ok
Click to expand...
Click to collapse
You can directly use 10.2.1.0 eu, follow instructions and reflash 10.2.1, I used it and it boot fine.
palalos81 said:
I think that wipe system will brick the phone............
Click to expand...
Click to collapse
No, if you follow the instructions and flash every files, no problem. Work with stable eu 10.2.1.0 too.
Regards
Good day. After installing RR 7.0, the Kernel Adiutor program shows a battery capacity of 3400 mah instead of 5500 mah. Can this be fixed?
bocha79 said:
Good day. After installing RR 7.0, the Kernel Adiutor program shows a battery capacity of 3400 mah instead of 5500 mah. Can this be fixed?
Click to expand...
Click to collapse
Happen with many gsi, it's not a big problem in my opinion.
Regards
What is POST-sGSI_3_v0.6 .zip, what does it?
What is No-verity-opt patch, what does it?
Why flash Magisk18.0 two times?
Can base Global-Dev ROM 9.1.17, too? Why Global stable?
Why
I am on AOSP 9.0. Do I really need to flash the eu-rom and all the rest (POST sgs, no-verity-opt patch too?
@Skyllery
Can you please make some screenshots of the RR UI on the Max 3? I like to see it... still waiting for bootloader unlock on my Max 3.
btw: Great to see someone here who is into modding/flashing! :good:
Skyllery said:
You can directly use 10.2.1.0 eu, follow instructions and reflash 10.2.1, I used it and it boot fine.
No, if you follow the instructions and flash every files, no problem. Work with stable eu 10.2.1.0 too.
Regards
Click to expand...
Click to collapse
Me too, but when i flash magisk 18, it still boot, then go to the launcher, it shutdown and reboot to recovery
Lecterr said:
What is POST-sGSI_3_v0.6 .zip, what does it?
What is No-verity-opt patch, what does it?
Why flash Magisk18.0 two times?
Can base Global-Dev ROM 9.1.17, too? Why Global stable?
Why
Click to expand...
Click to collapse
Post sgsi is a fix for mtp as far as I know
No verity is to disable encryption everywhere
You only need to flash it the first time. Would work fine.
And no boot only with Oreo vendor. Don't ask why dunno
Feenfleisch said:
I am on AOSP 9.0. Do I really need to flash the eu-rom and all the rest (POST sgs, no-verity-opt patch too?
Click to expand...
Click to collapse
Yes everything is needed. If you don't flash eu After wiping you don't have vendor files. Don't need to boot it (MIUI) reboot directly to recovery and follow steps after this one.
Consider to join telegram groups just type mi max 3 on telegram.
Regards
Sent from my MI MAX 3 using XDA Labs
JustDroidIt-XDA said:
@Skyllery
Can you please make some screenshots of the RR UI on the Max 3? I like to see it... still waiting for bootloader unlock on my Max 3.
btw: Great to see someone here who is into modding/flashing! :good:
Click to expand...
Click to collapse
For sure check attached files
chetchuakaka said:
Me too, but when i flash magisk 18, it still boot, then go to the launcher, it shutdown and reboot to recovery
Click to expand...
Click to collapse
You installed magisk manager ? Don't happen here and don't see on telegram group neither. Supposing you correctly followed instructions.
Consider join mi Max 3 telegram group just type this on search bar on this app. More support
Regards
Sent from my MI MAX 3 using XDA Labs
Cannot view or download the images: 404 not found.
Hi,
Followed the guide to the toe...
On reboot, I have the RR splash screen but it is stuck there
Will have to stick to MIUI or one of it's derivatives
Thanks anyways...
Regards.
JustDroidIt-XDA said:
Cannot view or download the images: 404 not found.
Click to expand...
Click to collapse
Sorry it's buggy don't know why. Join the telegram group there's many Ss even on the channel
Regards
Sent from my MI MAX 3 using XDA Labs
Thank you very much for your great guide!
RR rom is my best rom
but in my case, youtube video is not working
GoodHuman0817 said:
Thank you very much for your great guide!
RR rom is my best rom
but in my case, youtube video is not working
Click to expand...
Click to collapse
You used which miui as base ? Restored apps ?
It didn't happen here using vanced or official app or chrome. Maybe wipe dalvik and cache or reinstall app.
BTW for bt fix replace files in vendor. Nikita forget to share the file here. It's the same as the others. Search on guide forum for it can't send it through xDA lab
Regards
Sent from my MI MAX 3 using XDA Labs
Skyllery said:
You used which miui as base ? Restored apps ?
It didn't happen here using vanced or official app or chrome. Maybe wipe dalvik and cache or reinstall app.
BTW for bt fix replace files in vendor. Nikita forget to share the file here. It's the same as the others. Search on guide forum for it can't send it through xDA lab
Regards
Sent from my MI MAX 3 using XDA Labs
Click to expand...
Click to collapse
Thank you for your answer.
I did the installation in the same way as this thread.
And I installed using the file from this thread. (EU 8.8.30, etc.)
I used 'phh-trebble-pie-fixes.zip' to brightness fix (https://forum.xda-developers.com/mi-max-3/how-to/guide-android-9-pie-aosp-phh-treble-rom-t3862708)
And I tried to change 'BiTGApps' to 'official openGapps Stock', 'official openGapps micro', and 'official openGapps nano'.
But the result was the same.
It works fine in chorme. but doesn't work on official youtube app and vanced app.
Related
Hello friends!
Since the CyanogenMOD 13 arrived for “Moto E 2015 LTE”, admin of cyanogenmod.org removed CyanogenMOD 12.1 ROM from their site catalog :crying: :crying: .
Luckily, I downloaded that last and most stable CyanogenMOD 12.1 ROM for “Moto E 2015 LTE” just before they delete it from website :victory: :victory: ; which is based on Android 5.1.1 Lollipop.
So today, I am providing you that last and most stable CyanogenMOD 12.1 ROM and its installation procedure.
First, you need to download the ADB/Fastboot Files, CyanogenMOD ROM zip file, GApps, Stable and functional Squid Kernal zip file, SuperSU Update zip file and most important thing, Custom TWRP Recovery. Without custom recovery, you cannot flash CyanogenMOD ROM.
Here are the links to download these files.
1: Download ADB-Fastboot files (Android SDK Tools) from HERE
2: Download CyanogenMOD 12.1 ROM zip file from HERE.
3: Download TWRP-3.0.2 Recovery from HERE or HERE.
4: Download GApps from HERE or Here.
5: Download Squid Kernal zip file from HERE or Here.
6: Download SuperSU zip file from Here or Here.
umairprince2009 said:
Hello friends!
Since the CyanogenMOD 13 arrived for “Moto E 2015 LTE”, admin of cyanogenmod.org removed CyanogenMOD 12.1 ROM from their site catalog :crying: :crying: .
Luckily, I downloaded that last and most stable CyanogenMOD 12.1 ROM for “Moto E 2015 LTE” just before they delete it from website :victory: :victory: ; which is based on Android 5.1.1 Lollipop.
So today, I am providing you that last and most stable CyanogenMOD 12.1 ROM and its installation procedure.
First, you need to download the ADB/Fastboot Files, CyanogenMOD ROM zip file, GApps, Stable and functional Squid Kernal zip file, SuperSU Update zip file and most important thing, Custom TWRP Recovery. Without custom recovery, you cannot flash CyanogenMOD ROM.
Here are the links to download these files.
1: Download ADB-Fastboot files (Android SDK Tools) from HERE
2: Download CyanogenMOD 12.1 ROM zip file from HERE.
3: Download TWRP-3.0.2 Recovery from HERE or HERE.
4: Download GApps from HERE or Here.
5: Download Squid Kernal zip file from HERE or Here.
6: Download SuperSU zip file from Here or Here.
Click to expand...
Click to collapse
Please make a change in your post and add links to Squid's TWRP rather than official cause official has mounting and unmounting issues leading to corrupted gapps.
I'll flash this ROM in a few minutes. Thanks for posting the link to it
Honestly I don't see the point in using CM12.1 anymore CM13 is pretty stable now.
Sent from my XT1521 using XDA Labs
ayush rao said:
Honestly I don't see the point in using CM12.1 anymore CM13 is pretty stable now.
Click to expand...
Click to collapse
Well, some people might not like Marshmallow so they go back to Lollipop.
VenomMOD said:
Well, some people might not like Marshmallow so they go back to Lollipop.
Click to expand...
Click to collapse
Marshmallow is the same except better.
Cobra04 said:
Marshmallow is the same except better.
Click to expand...
Click to collapse
I just noticed while using this rom, it got really laggy just by pulling down the notifications shade. So, you're right about Marshmallow being better to an extent.
Hello. How can I unlock the bootloader of the Moto E XT1528?
Itachi_3000 said:
Hello. How can I unlock the bootloader of the Moto E XT1528?
Click to expand...
Click to collapse
You can't.
VenomMOD said:
I just noticed while using this rom, it got really laggy just by pulling down the notifications shade. So, you're right about Marshmallow being better to an extent.
Click to expand...
Click to collapse
I am using this CM12.1 ROM from the date it was posted on CM's site. It is working flawlessly. I didn't even do a Factory Data Reset to it from last 7 months, No lagging, no issues, working absolutely fine with great battery life.
umairprince2009 said:
I am using this CM12.1 ROM from the date it was posted on CM's site. It is working flawlessly. I didn't even do a Factory Data Reset to it from last 7 months, No lagging, no issues, working absolutely fine with great battery life.
Click to expand...
Click to collapse
Anyway to get VOLTE working ?
theratedrock said:
Anyway to get VOLTE working ?
Click to expand...
Click to collapse
Just use LAOS.
Sent from my surnia using XDA Labs
ayush rao said:
Just use LAOS.
Click to expand...
Click to collapse
-_-
theratedrock said:
Anyway to get VOLTE working ?
Click to expand...
Click to collapse
I didn't try to get VoLTE on this so i am not sure about it.
umairprince2009 said:
I didn't try to get VoLTE on this so i am not sure about it.
Click to expand...
Click to collapse
Doesn't work though.
If you guys still want to use LP based ROM, I recommend PAC-LP. https://www.androidfilehost.com/?w=files&flid=162292
From Recovery
Xiaomi.eu https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/
MIUI Pro https://miuipro.by/roms/
How to upgrade?
i will try
excellent build! very fast working! morelocale2, twrp, supersu work great.
K0CMOHABT said:
excellent build! very fast working! morelocale2, twrp, supersu work great.
Click to expand...
Click to collapse
Did you have to wipe internal storage? Mine is looping on Mi logo after flashing every partition except internal storage.
Edit : Working fine now after doing Factory Reset in Recovery.
In this thread Therese a recovery zip:http://en.miui.com/forum.php?mod=viewthread&tid=747515&extra=page=1&mobile=2
http://61.128.155.1/bigota.d.miui.com/7.8.14/miui_MIMAX2_7.8.14_05460768d1_7.1.zip
---------- Post added at 11:04 AM ---------- Previous post was at 11:04 AM ----------
Haven't tried it yet.
Miuipro have a flashable zip too. I'm running it now. Everything works great but can't get fingerprint reader to work. Anyone know of a fix?
been on zip for 24 hours everything working for me even installed gapps. only thing missing is getting my gear s3 to link up but i know it wont cause its an alpha ver great post thank you
Update version 7.8.17 http://bigota.d.miui.com/7.8.17/oxygen_images_7.8.17_20170817.0000.00_7.1_cn_4e886698e1.tgz
Plz post the procedure
If you are rooted, have TWRP, you can flash xiaomi.eu or miuipro from recovery. I went from xiaomi.eu 7.20 to miuipro 8.14 to xiaomi.eu 8.17 without wipes.
panzerpig said:
If you are rooted, have TWRP, you can flash xiaomi.eu or miuipro from recovery. I went from xiaomi.eu 7.20 to miuipro 8.14 to xiaomi.eu 8.17 without wipes.
Click to expand...
Click to collapse
Thanks, did eu rom from twrp successfully.......
Recovery version https://sourceforge.net/projects/xi.../files/xiaomi.eu/MIUI-WEEKLY-RELEASES/7.8.17/
Only thing I dont like with xiaomi.eu vs miuipro is that the new animated icons isnt included. In official and miuipro, playstore and photos, for example is animated in the launcher.
I'm facing controller game detected always. How to turn off. I try different keyboard and whatsoever it failed. Why this ROM is detecting me always using a controller. How to fix it.
How to disable it.
Is miui 9 have bug in sound enhancer while using earphone? Cause every time I turn on it my earphone does not work. Or I sounds annoyingly.
panzerpig said:
Only thing I dont like with xiaomi.eu vs miuipro is that the new animated icons isnt included. In official and miuipro, playstore and photos, for example is animated in the launcher.
Click to expand...
Click to collapse
You must use de default theme for the animations work
For mi it's working with xiaomi.eu rom
Sent from my MI MAX 2 using XDA-Developers Legacy app
paulojorjealmeida said:
You must use de default theme for the animations work
For mi it's working with xiaomi.eu rom
Sent from my MI MAX 2 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yeah, they have added it in eu-rom now too.
If I install TWRP will I get ota updates?
sathwikrao575 said:
If I install TWRP will I get ota updates?
Click to expand...
Click to collapse
Yes, if you use xiaomi.eu
The only things broken are live display and auto brightness. Here's the link: THREAD
Pretty impresive for a generic image. Our Android phones are becoming like PCs.
Edit: Nothing is broken in v4.
triggerlord said:
The only things broken are live display and auto brightness. Here's the link: THREAD
Pretty impresive for a generic image. Our Android phones are becoming like PCs.
Click to expand...
Click to collapse
Does Bluetooth streaming work? i noticed that was one of the items not working on the AOSP GSI Rom...Are you using it as a daily driver?
I have just purchased an Honor 7x and live in the UK, I have emailed huawei concerning my unlock code im still waiting could you kindly tell me which TWRP image you used and what rom I need to flash i.e a or b
vuittion said:
I have just purchased an Honor 7x and live in the UK, I have emailed huawei concerning my unlock code im still waiting could you kindly tell me which TWRP image you used and what rom I need to flash i.e a or b
Click to expand...
Click to collapse
No need for TWRP I believe, fastboot will suffice. Also the phone has the A-only partition type, not A-B.
smokinjoe2122 said:
Does Bluetooth streaming work? i noticed that was one of the items not working on the AOSP GSI Rom...Are you using it as a daily driver?
Click to expand...
Click to collapse
if it is in the same condition as the lineage OS on then no. normal pairing for file transfer works tho
imHadees said:
No need for TWRP I believe, fastboot will suffice. Also the phone has the A-only partition type, not A-B.
Click to expand...
Click to collapse
unlock bootloader + fastboot system.img?
Or just fastboot system.img?
am wondering which custom ROM to use, GSI or the Resurrection build here....... (ok i see RROS here already included Huawei camera but user say it's buggy)
Can i install Huawei camera? it works with the dual camera for bokeh effect right?
optionalmgrr.la said:
unlock bootloader + fastboot system.img?
Or just fastboot system.img?
am wondering which custom ROM to use, GSI or the Resurrection build here....... (ok i see RROS here already included Huawei camera but user say it's buggy)
Can i install Huawei camera? it works with the dual camera for bokeh effect right?
Click to expand...
Click to collapse
Unlock the bootloader, factory reset from recovery, flash system image from fastboot, factory reset from recovery, then reboot. Also make sure that you have upgraded to EMUI 8 / Android 8. I only tested the stock GSI.
So I've been testing this for awhile. I can't find anything broken. Plus the live display and auto brightness features are fixed in v4. I don't have Bluetooth headphones to test that but I did test a Bluetooth controller and it works fine. It's worth noting that the openkirin team are working on this rom (or at least their patches get merged in) so it probably has newer patches and fixes that aren't in the ROMs on this forum.
Some screenshots.
triggerlord said:
Some screenshots.
Click to expand...
Click to collapse
Have you tried the new RR?
allrockedout said:
Have you tried the new RR?
Click to expand...
Click to collapse
The one for the 7x or the GSI?
triggerlord said:
The one for the 7x or the GSI?
Click to expand...
Click to collapse
New ppsh gsi RR? I'm using aosp gsi right now everythings working perfect with magisk installed. But I want to know if you tried gsi rr with gapps and root. Because I hear people having issue installing gapps ?
allrockedout said:
New ppsh gsi RR? I'm using aosp gsi right now everythings working perfect with magisk installed. But I want to know if you tried gsi rr with gapps and root. Because I hear people having issue installing gapps ?
Click to expand...
Click to collapse
Well it has all the same patches. I'm using opengapps and magisk on lineage so it should work. I haven't tested it though
Sent from my Honor 7X using XDA Labs
triggerlord said:
Well it has all the same patches. I'm using opengapps and magisk on lineage so it should work. I haven't tested it though
Click to expand...
Click to collapse
Open gapps micro or nano? Just was reading a lot of people don't have enough space in that partition and can't install gapps. Also did you install system img in twrp and flash gapps in twrp?
allrockedout said:
Open gapps micro or nano? Just was reading a lot of people don't have enough space in that partition and can't install gapps. Also did you install system img in twrp and flash gapps in twrp?
Click to expand...
Click to collapse
I'm using opengapps pico. Yes I flashed everything in trwp back to back without rebooting.
Sent from my Honor 7X using XDA Labs
triggerlord said:
I'm using opengapps pico. Yes I flashed everything in trwp back to back without rebooting.
Click to expand...
Click to collapse
K thanks I'm going to try that
allrockedout said:
K thanks I'm going to try that
Click to expand...
Click to collapse
One more thing. If you have a slow LTE connection, you can fix that by installing kernel auditor and setting the TCP mode to Reno. Then it'll be back to full speed. (In misc.)
Sent from my Honor 7X using XDA Labs
triggerlord said:
One more thing. If you have a slow LTE connection, you can fix that by installing kernel auditor and setting the TCP mode to Reno. Then it'll be back to full speed. (In misc.)
Click to expand...
Click to collapse
Thanks again I'll check that out
How much sot you guys are getting guys?
And is volte working with this rom?
triggerlord said:
So I've been testing this for awhile. I can't find anything broken. Plus the live display and auto brightness features are fixed in v4. I don't have Bluetooth headphones to test that but I did test a Bluetooth controller and it works fine. It's worth noting that the openkirin team are working on this rom (or at least their patches get merged in) so it probably has newer patches and fixes that aren't in the ROMs on this forum.
Click to expand...
Click to collapse
How is performance vs stock EMUI? I'd be interested on how this hardware performs without the extra skin on top.
Are there any AOSP ROMS for Mate 10 lite/Nova 2i? Please tell me if there's a rom thanks
There are many, using gsi treble rom..
You can search on google how to flash..
travarilo said:
There are many, using gsi treble rom..
You can search on google how to flash..
Click to expand...
Click to collapse
Where did you install this rom, give me the link is not, tks
travarilo said:
There are many, using gsi treble rom..
You can search on google how to flash..
Click to expand...
Click to collapse
Any issue sir on your RROS ?
SubIMEI said:
Where did you install this rom, give me the link is not, tks
Click to expand...
Click to collapse
Allan C. E said:
Any issue sir on your RROS ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
It's still using stock aosp camera, can't flash huawei camera, so camera is featureless but works..
Broken voice on earphone when playing spotify sometimes..
I used it for a day and back to stock rom because of camera so I didn't test more..
travarilo said:
https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
It's still using stock aosp camera, can't flash huawei camera, so camera is featureless but works..
Broken voice on earphone when playing spotify sometimes..
I used it for a day and back to stock rom because of camera so I didn't test more..
Click to expand...
Click to collapse
flash Gapps ver ?
SubIMEI said:
flash Gapps ver ?
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=962187416754467868
I'm RNE-L22 too...I really does work?!?
travarilo said:
There are many, using gsi treble rom..
You can search on google how to flash..
Click to expand...
Click to collapse
123az said:
I'm RNE-L22 too...I really does work?!?
Click to expand...
Click to collapse
I am on RNE-L22 too
I'm so scared to try...I have done twrp flashong of custom roms..im new to this GSI img thingy
How long did the process take?
travarilo said:
I am on RNE-L22 too
Click to expand...
Click to collapse
123az said:
How long did the process take?
Click to expand...
Click to collapse
it's pretty fast, maybe 10 - 15 minutes..
boot to twrp, factory reset, reboot to recovery, install file .img as system image, reboot to recovery, install gapps & magisk, reboot system..
Team Openkirin has released GSI images but still haven't give us instructions to use them
https://www.xda-developers.com/openkirin-emui-8-huawei-honor/
---------- Post added at 08:59 AM ---------- Previous post was at 08:15 AM ----------
Which Twrp recovery are you using?
travarilo said:
it's pretty fast, maybe 10 - 15 minutes..
boot to twrp, factory reset, reboot to recovery, install file .img as system image, reboot to recovery, install gapps & magisk, reboot system..
Click to expand...
Click to collapse
123az said:
Team Openkirin has released GSI images but still haven't give us instructions to use them
https://www.xda-developers.com/openkirin-emui-8-huawei-honor/
---------- Post added at 08:59 AM ---------- Previous post was at 08:15 AM ----------
Which Twrp recovery are you using?
Click to expand...
Click to collapse
I am using this one https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447
Btw, Carbon ROM from openkirin is working, there are 2 cameras, stock and huawei..
Video rec, bokeh, portrait on huawei camera don't work, pro mode works..
Stock camera is featureless but both photo and video work..
GApps has been included..
travarilo said:
I am using this one https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447
Btw, Carbon ROM from openkirin is working, there are 2 cameras, stock and huawei..
Video rec, bokeh, portrait on huawei camera don't work, pro mode works..
Stock camera is featureless but both photo and video work..
GApps has been included..
Click to expand...
Click to collapse
Have you tried the RR one? I downloaded it but it has a different file extension ".xz" instead of ".img".
jonj0njon said:
Have you tried the RR one? I downloaded it but it has a different file extension ".xz" instead of ".img".
Click to expand...
Click to collapse
just extract..
RR built with no gapps, so you need to flash gapps after flashing system image..
travarilo said:
just extract..
RR built with no gapps, so you need to flash gapps after flashing system image..
Click to expand...
Click to collapse
This P10 Lite Version of TWRP works with Mate 10 Lite ? And what Magisk Version u have installed ?
My Problem is, i tested now carbon an rr. but every rom boots to erecovery and want a format data/factory reset. boot to twrp, format data, issue persist. everytime erecovery No boot to system
Copkiller2010 said:
This P10 Lite Version of TWRP works with Mate 10 Lite ? And what Magisk Version u have installed ?
My Problem is, i tested now carbon an rr. but every rom boots to erecovery and want a format data/factory reset. boot to twrp, format data, issue persist. everytime erecovery No boot to system
Click to expand...
Click to collapse
Yeah it works, I use magisk 16.4
Make sure you are in oreo stock rom, boot to twrp, factory reset, format data if you want to clean flash, flash system image, reboot to recovery, flash gapps for rr, flash magisk, reboot to system..
I did that and it was booting normally..
I am on Elemental Rom 1.1. Its emui 8 but not Boot. Do the Same you wrote. Maybe Data Format to ext4? I dont unterstand the Reason why not Boot.
Copkiller2010 said:
I am on Elemental Rom 1.1. Its emui 8 but not Boot. Do the Same you wrote. Maybe Data Format to ext4? I dont unterstand the Reason why not Boot.
Click to expand...
Click to collapse
Idk, maybe you should try to flash stock rom first to make it boot..
My data partition is f2fs, no need to format to ext4..
Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul
anshul1123 said:
Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul
Click to expand...
Click to collapse
Have a look at the guides section https://forum.xda-developers.com/oneplus-5/how-to/android-p-coming-to-5-5t-year-t3787602
anshul1123 said:
Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul
Click to expand...
Click to collapse
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE
Pho3nX said:
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE
Click to expand...
Click to collapse
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?
archer797 said:
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?
Click to expand...
Click to collapse
yes, still required
Hey guys I'm looking into flashing all this, but can you guys tell me what doesn't work? What are the differences with custom roms?
From what I understand, it's similar to a custom ROM in terms of camera (not fully working), in terms of volte (doesn't work).
I'm willing to test but since it takes a lot of time on my side (need to fully backup etc...), I hope it works fine
Also, the gsi is the lastest version now that official P is out?
Sent from my OnePlus5 using XDA Labs
matssa said:
Hey guys I'm looking into flashing all this, but can you guys tell me what doesn't work? What are the differences with custom roms?
From what I understand, it's similar to a custom ROM in terms of camera (not fully working), in terms of volte (doesn't work).
I'm willing to test but since it takes a lot of time on my side (need to fully backup etc...), I hope it works fine
Also, the gsi is the lastest version now that official P is out?
Click to expand...
Click to collapse
You should ask rom related things in the rom thread https://forum.xda-developers.com/pr...-android-p-developer-preview-t3816659/page116
I am on open beta 15. I saw this video of formatting data, then installing mokee rom, mounting vendor and installing gsi image of dp5 of android p.
Things seemed pretty easy.
I did the exact steps. I am stuck at a point where i can't find vendor option in mount of twrp.
Could someone guide me on what can de done?
cosmic077 said:
I am on open beta 15. I saw this video of formatting data, then installing mokee rom, mounting vendor and installing gsi image of dp5 of android p.
Things seemed pretty easy.
I did the exact steps. I am stuck at a point where i can't find vendor option in mount of twrp.
Could someone guide me on what can de done?
Click to expand...
Click to collapse
Change twrp. I use blu spark twrp and if i remember right it's name had treble
Vika__ said:
Change twrp. I use blu spark twrp and if i remember right it's name had treble
Click to expand...
Click to collapse
Thanks bro. Lets see if that helps. I saw two videos and both used different twrps.
Today i ll try with blu spark treble twrp.
Lets see if it works.
is volte working ?
On PR1 i have one bug. When send screen to my Anycast , find it and when i select it show "connecting" but never connect. When try connect i see bright up and go to lock screen but don´t send image. Anymore have this problem ?. Any idea to solved it ?. I tried diferent kenels, update mokee vendor base , add entries to build.prop refer to this problem, ..... . Thanks.
Chnages on PR1 over DP5
Pho3nX said:
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE
Click to expand...
Click to collapse
Can you get some link detailing the Changelog about PR1, I am trying to find the changes in PR1 over DP5.
I treid DP5 on Oneplus 5 and it was still Highly unstable, Video Call feature missing without DUO, Front camera not workng in Ported Google Camera, and many other problems like only LTE no VoLTE support yet. So I am looking for changelog of PR1. ( or you could just mention few changes)
abhinav.kakku said:
Can you get some link detailing the Changelog about PR1, I am trying to find the changes in PR1 over DP5.
I treid DP5 on Oneplus 5 and it was still Highly unstable, Video Call feature missing without DUO, Front camera not workng in Ported Google Camera, and many other problems like only LTE no VoLTE support yet. So I am looking for changelog of PR1. ( or you could just mention few changes)
Click to expand...
Click to collapse
It's not an official OnePlus release, it's a ported rom, you have to expect problems.
djsubterrain said:
It's not an official OnePlus release, it's a ported rom, you have to expect problems.
Click to expand...
Click to collapse
I know that, Official will take much time now. Hope there is improvement over DP5
apparently we can use VOLTE fix from mi4 on our device
can anybody verify that ?
Android P PR1 stuck on Boot Loop to recovery on Oneplus5
I have followed the steps, Wipe device,
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery.
abhinav.kakku said:
I have followed the steps, Wipe device,
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery.
Click to expand...
Click to collapse
With wipe device you mean formatting data right? After completing mokee set up when you reboot to recovery swipe to factory reset and then flash A image and so on
seniug said:
With wipe device you mean formatting data right? After completing mokee set up when you reboot to recovery swipe to factory reset and then flash A image and so on
Click to expand...
Click to collapse
Agreed your steps need to be:
I have followed the steps, Wipe device, format data
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery
---------- Post added at 08:03 AM ---------- Previous post was at 08:00 AM ----------
archer797 said:
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?
Click to expand...
Click to collapse
Does anyone know what purpose the Mokee ROM portion of the setup serves on a technical level? Also has anyone noticed that the front camera works on snapchat but not in the google cam port? interesting stuff.