I am currently on the nusantara project android 11 custom rom on my zenfone max m2 and i want to revert back to stock rom for personal reasons.
Is there a flashable stock rom by any chance? I've searched everywhere on how to revert back from custom rom to stock rom with this device and found no leads up until now. Well, one that doesn't involve a pc that is.
I am no professional in flashing, but i can follow the instructions. My greatest thanks for anyone who could help me. Maraming salamat.
Charuzu said:
I am currently on the nusantara project android 11 custom rom on my zenfone max m2 and i want to revert back to stock rom for personal reasons.
Is there a flashable stock rom by any chance? I've searched everywhere on how to revert back from custom rom to stock rom with this device and found no leads up until now. Well, one that doesn't involve a pc that is.
I am no professional in flashing, but i can follow the instructions. My greatest thanks for anyone who could help me. Maraming salamat.
Click to expand...
Click to collapse
Hope this will help u
stock-a10-rom: GDRIVE LINK: STOCK A10 ROM for X01AD
NB: No Need To Edit Updater Script
Flash Guide : •
Download The File
Wipe Data cache system Vendor
Flash Stock ROM
Flash Magisk
Flash Dm-Verity
Reboot
Saif Stark said:
Hope this will help u
stock-a10-rom: GDRIVE LINK: STOCK A10 ROM for X01AD
NB: No Need To Edit Updater Script
Flash Guide : •
Download The File
Wipe Data cache system Vendor
Flash Stock ROM
Flash Magisk
Flash Dm-Verity
Reboot
Click to expand...
Click to collapse
Thank you very much.
I have downloaded the rom already but i don't get the "NB: No Need To Edit Updater Script". What does that mean?
The flash guide is clear to me, but i forgot what "Dm-Verity" was. I think i flashed something like that before but i really forgot about it. Where can i download it?
Thank you for being patient with me
Charuzu said:
Thank you very much.
I have downloaded the rom already but i don't get the "NB: No Need To Edit Updater Script". What does that mean?
The flash guide is clear to me, but i forgot what "Dm-Verity" was. I think i flashed something like that before but i really forgot about it. Where can i download it?
Thank you for being patient with me
Click to expand...
Click to collapse
Dm -verity here
Saif Stark said:
Dm -verity here
Click to expand...
Click to collapse
Help, what do i do?
Charuzu said:
Help, what do i do?
Click to expand...
Click to collapse
I used https://pitchblackrecovery.com/x01ad / (I don't know if there is such a function in TWRP)
You just need to activate this item in the settings, and everything will be stitched
of.tigler said:
I used https://pitchblackrecovery.com/x01ad / (I don't know if there is such a function in TWRP)
You just need to activate this item in the settings, and everything will be stitched
Click to expand...
Click to collapse
I don't have that option
How do i install your recovery? Can i flash it through twrp? Sorry, please be patient with me
Charuzu said:
I don't have that option
How do i install your recovery? Can i flash it through twrp? Sorry, please be patient with me
Click to expand...
Click to collapse
Yes, you just need to flash the archive that the link. And restart in recovery
of.tigler said:
Yes, you just need to flash the archive that the link. And restart in recovery
Click to expand...
Click to collapse
I tried flashing the latest twrp instead and it worked! (still no treble thingy option but it flashed the rom this time). Though i also think that if i flashed the pitch black recovery, it would've worked as well. So thank you very much still!
Also, my greatest regards to @Saif Stark for the rom, instructions, and the dm verity file.
I have achieved my goal because of you two. Thank you very much.
Related
FULL INSTRUCTION: https://www.youtube.com/watch?v=_FTQJd9fROs&feature=youtu.be
Finally i found the Miui Rom for the z3 d6603 and its perfect!!! !!!THE BATTERY LIFE IS AMAZING!!!
https://youtu.be/vTbOrR6pmJ0
*Locked Bootloader*
Install:
Follow this instruction until u have installed the recovery!!!
http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Than, put the .zip File into your phone and Flash it from the recovery mode!!!
The installer is chinese, but you can click the right button every Time.
You can Flash the GA APPS for Android Version 4.4.4 but i installed the Google Installer from here http://en.miui.com/thread-3998-1-1.html after all
MIUI DOWNLOAD: https://mega.co.nz/#!C95B1bjR!T-G9Hh...ccv4NdEoiDlaaQ
If u Need help, just write it
From Android. 5.x.x
Android 5.0 > Root > Install XZDual Recovery > Clear Data / Cache / Dalvik > Flash MIUI > Reboot > Set up the system > Reboot again into Recover + Flash G-Apps (http://www.androidrootz.com/2015/03/...-pa-gapps.html) [FYI - I'm installed The Nano Package) FROM: @Salaminator
Big Thanks to @G-FACE for the instruction !!!
How about a link?
link
augie7107 said:
How about a link?
Click to expand...
Click to collapse
This is a link:
miui.com/download-288.html
well in the pic it states Miui Version 5 and not Version 6
augie7107 said:
How about a link?
Click to expand...
Click to collapse
https://mega.co.nz/#!C95B1bjR!T-G9HhUctEygy15EfYPa9PH_LT4Fpccv4NdEoiDlaaQ that link is better to download
https://youtu.be/vTbOrR6pmJ0 here is a Video !
Tokolosh said:
well in the pic it states Miui Version 5 and not Version 6
Click to expand...
Click to collapse
That is V6 but the build number is 5.x.x
What isn't working on this ROM, anything?
its all working so far
Any guide to install this from a stock rom?
With which recovery install this rom?
For LB or UB?
I had a LB
fabilaaaa said:
I had a LB
Click to expand...
Click to collapse
Which recovery do you have?LockedDual?
From which rom you install this,stock...LP or KK?
Look at my first post. I updated it
But i used the Z3-lockeddualrecovery2.8.21-RELEASE.installer and the 23.0.A.2.93 so KK
I assume installing Miui over rooted LP Locked bootloader would cause bootloop or? I really don't want to wipe, downgrade then install SuperSU & Recovery to just test this ROM...
O hi dont know this. Maybe u can make a full backup of ur System in the recovery menu?
fabilaaaa said:
O hi dont know this. Maybe u can make a full backup of ur System in the recovery menu?
Click to expand...
Click to collapse
Ok, I'll backup, flash and hope for the best lol... I'll report back whether it worked or not.
Worked like a charm! No problems so far, very smooth will test for a few days...
Check the Battery Life! Ist awesome Do u flashed the Ga Apps or with Google Installer ?
fabilaaaa said:
Check the Battery Life! Ist awesome Do u flashed the Ga Apps or with Google Installer ?
Click to expand...
Click to collapse
Yeah I did, loving this ROM so far, ill need to see how good the battery life is after a full cycle but so far so good thanks!
Deodexed mean everything reunified and put back inside apk and jar file.
Compare 1700mb stock rom, this rom only 900mb very small foot print, Deodexed_P2a42_S233_170404_ROW rom will take much less space in system file, result is reduce system file till half of free space.
Features:
remove some bloadware,
added lenovo gallery,
added latest/update gapps,
added dolby atmos,
magisk root
I did not responsible for phone damage or bricked
Need to unlock bootloader and twrp installed
Always do backup rom first.
Flashing only with latest twrp-3.1.0-0, or above to avoid encryption problem and loosing data later, see in my another thread, https://forum.xda-developers.com/lenovo-p2/development/unofficial-twrp-3-0-2-0-p2a42-t3573308
Before flashing need to wipe dalvik cache, system, data and cache
change data system file to ext4
now install rom from zip file
Reboot to system, don't do anything just wait around 7-10 minute till appear.
Done!!!
See the different system running more faster, smooth and better benchmark result.
Bugs!!! nothing, everything working as normal,
if any, only came from original firmware stock rom
Deodexed_P2a42_S62_170117_ROW (Marshmallow):
Updated on 17/8/2017:
https://mega.nz/#!3dIAiJIZ!XDzCf49EPhxfD9P-btE4ilIJKW8rxZbpC8PfVzgDTlU
Deodexed_P2a42_S244_170725_ROW (Nougat):
Updated on: 17/8/2017
https://mega.nz/#!Sc43wIKL!CDk-QZhCjlyEtSlX1juPRgSSZx-4GckXk_kRC9mufgY
If you want theme activated flash with this file:
Updated on: 17/8/2017
https://mega.nz/#!2cZlxJRb!OH9heU1256b29b0hXuIVyXf0jkHWM2l3xKGUfUpizgg
Yayyy !!! Is it better to ext4 ?
Do you want me to host magnet link for the BitTorrent network for this file (DHT decentralized - no tracker) in case people can't use / don't like to use Mega?
kataeb said:
Yayyy !!! Is it better to ext4 ?
Click to expand...
Click to collapse
That's ok
Undesirable said:
Do you want me to host magnet link for the BitTorrent network for this file (DHT decentralized - no tracker) in case people can't use / don't like to use Mega?
Click to expand...
Click to collapse
No warez or mirrors
hendibudi said:
No warez or mirrors
Click to expand...
Click to collapse
Just because it's BitTorrent, it doesn't instantly mean Warez. I mean your file isn't Warez, is it? However, I shall abide by your request for no mirrors.
Hey @hendibudi Thanks for your work, was waiting for this deodexed rom! Why not deodex the S233? Btw I love you're adding Dolby Atmos. Can you try to include V4A Sony Beats Atmos next time?
911-Future_Maker said:
Hey @hendibudi Thanks for your work, was waiting for this deodexed rom! Why not deodex the S233? Btw I love you're adding Dolby Atmos. Can you try to include V4A Sony Beats Atmos next time?
Click to expand...
Click to collapse
Sadly till to day my region didn't receive ota s233
hendibudi said:
Sadly till to day my region didn't receive ota s233
Click to expand...
Click to collapse
Alright, that's fine. If you need it I have the OTA zip from 232 to 233. But I think it will cause problems if you install it over the deodexed version.
911-Future_Maker said:
Alright, that's fine. If you need it I have the OTA zip from 232 to 233. But I think it will cause problems if you install it over the deodexed version.
Click to expand...
Click to collapse
Just send me zip link i will manage thanks
hendibudi said:
Just send me zip link i will manage thanks
Click to expand...
Click to collapse
Here you go OTA S232 to S233.
https://mega.nz/#!rU1XWSxA!b8NCuWTyFrM3CE8-kqY-2nH8bTCGTsnGT7w0FFbka9s
Nice job! Stable deodexed nougat.
Thanks. Smooth
911-Future_Maker said:
Here you go OTA S232 to S233.
https://mega.nz/#!rU1XWSxA!b8NCuWTyFrM3CE8-kqY-2nH8bTCGTsnGT7w0FFbka9s
Click to expand...
Click to collapse
Thanks
wzedlare said:
Nice job! Stable deodexed nougat.
Click to expand...
Click to collapse
Thanks
waiting for s233
This time i will install substratum on this and ROCK
i flashed rom with out any issues, installed substratum but its saying SuperUSer permission Denied what to do??? any ideas??
Update : installed phhs superuser, and finally got it to work ..
nandakis4 said:
waiting for s233
This time i will install substratum on this and ROCK
Click to expand...
Click to collapse
S233 better performance
Need help about deodexed rom
hendibudi said:
S233 better performance
Click to expand...
Click to collapse
@ hendibudi
dear brother ! I'm a stock nougat user of lenovo p2. I never root my phone. after 5 days, my bootloader will be unlocked. Then I want to install your marshmallow deodexed rom via your TWRP3.1.0. If there any chance to having bootloop or trouble as I downgrade from nougat to marshmallow ? pls suggest me if it's safe ! And one more thing, you wrote in your post to wipe cache, dalvik, data. Don't I need to wipe also system including those ? pls clear me if I should wipe system before flashing ! And after flashing, do I need to wipe cache, data and dalvik again ? should I try to install your marshmallow over my nougat or I should wait for your next s233 deodexed ?? pls kindly clear me the total procedure step by step as I am a new member here and firstly want to install custom rom. Need your help to avoid any bricking issue ..... thanks a lot !!
911-Future_Maker said:
Here you go OTA S232 to S233.
https://mega.nz/#!rU1XWSxA!b8NCuWTyFrM3CE8-kqY-2nH8bTCGTsnGT7w0FFbka9s
Click to expand...
Click to collapse
waiting for updated and UBL
Head over to this thread to know what is deodex and odex
https://forum.xda-developers.com/showthread.php?t=2200349
Only below mentioned J200G FIRMWARE supported.
STEPS:
Clean system and flash stock rom of
"Baseband version - J200GDDU2AQF6"
"BUILD NO.- LMY47X.J200GDDU2AQF3"
Do basic setup, reboot into stock recovery and then reboot to download mode to flash twrp to avoid complications.
After flashing twrp,
Download and flash busybox from here
http://www.mediafire.com/download/8fbe6u6w6chsrff/BusyBox-v1.24.2-Stericson.zip
Download and flash the zip from
And then wipe cache , dalvik cache, data or u can just do a factory reset from twrp.
Download and flash OPEN GAPPS from
www.opengapps.org
Choose ARM category in platform, 5.1 in android version and any variant except tvstock.
Boot and Enjoy more space in system.
Remember Boot time will increase as a result of a deodexed system.
EXTRAS:
Compatible sound mods:
#BIOHAZARD SOUND MOD [SRC-K]: https://forum.xda-developers.com/android/software/sound-mod-biohazard-android-infected-t3373888
#MAXX AUDIO: https//forum.xda-developers.com/oneplus-one/themes-apps/app-05q-maxxaudio-lib-t3026967
#XPERIA WALKMAN: https://forum.xda-developers.com/android/software/mod-xperia-x-premium-walkman-clearaudio-t3373553
#You need a permissive kernel for better working of the sound mods.
#U can flash all the above sound mods in sequence from last to first.
Can i install pico gapps? and will mods like grace UX reloaded or backlash work?
souvikdas92 said:
Can i install pico gapps? and will mods like grace UX reloaded or backlash work?
Click to expand...
Click to collapse
yes u can install any gapps u want..even AROMA GAPPS...and regarding grace ux or backlash, u have to ask the developer if the system ui is deodexed or not.
Installing gapps and BusyBox will deodex the ROM?
DaRdamnDoG said:
Installing gapps and BusyBox will deodex the ROM?
Click to expand...
Click to collapse
No. A zip file is needed to be flashed but the link is deleted for now. It will be updated soon.
Thanks!
Link ... ?
Sent from my [device_name] using XDA-Developers Legacy app
Maxx audio link not working
developerchandu said:
Click to expand...
Click to collapse
Here
https://www.androidfilehost.com/?w=files&flid=206541
pritamdutt said:
Here
https://www.androidfilehost.com/?w=files&flid=206541
Click to expand...
Click to collapse
Thanks !
Just confirm me that above 3 zips will be flashed in following order .
1. Walkman
2. Maxxx
3. Biohazard
Please confirm above order is right or wrong.
developerchandu said:
Thanks !
Just confirm me that above 3 zips will be flashed in following order .
1. Walkman
2. Maxxx
3. Biohazard
Please confirm above order is right or wrong.
Click to expand...
Click to collapse
Yes it's in right order and ensure that u have enough space in system.
pritamdutt said:
Yes it's in right order and ensure that u have enough space in system.
Click to expand...
Click to collapse
Daily limit of thanks reached !
I will thank you tomorrow :victory:
pritamdutt said:
Yes it's in right order and ensure that u have enough space in system.
Click to expand...
Click to collapse
Hello sir. The rom that you provided is deodexed right?
Can i flash this rom for galaxy J2OOGDDUZAQF6
Thread closed at OP's request
How to install this ROM
This ROM are working??
Rom not booting still
Not booting
Plzz remove this tread.It will be harmful for some users.
Remove link only
Flashing Error.
When i try to flash this rom using twrp recovery then i face a Error
MAH35H said:
When i try to flash this rom using twrp recovery then i face a Error
Click to expand...
Click to collapse
We need a higher version of TWRP .Or modify the update script . Anyway this rom isn't booted.
I use twrp recovery 3.1.1.0 official verson. And how To modify update script?? Can u tell me??
arvaaz said:
How to install this ROM
This ROM are working??
Download link-
https://www.androidfilehost.com/?fid=817550096634797137
Click to expand...
Click to collapse
Where did you get this from?
Maybe if we can reach the creator we can expose the issues to him, and see if there's a way to boot this (or create a booteable build). For example, ido has already a booteable ROM.
Link is posted in
Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul
anshul1123 said:
Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul
Click to expand...
Click to collapse
Have a look at the guides section https://forum.xda-developers.com/oneplus-5/how-to/android-p-coming-to-5-5t-year-t3787602
anshul1123 said:
Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul
Click to expand...
Click to collapse
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE
Pho3nX said:
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE
Click to expand...
Click to collapse
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?
archer797 said:
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?
Click to expand...
Click to collapse
yes, still required
Hey guys I'm looking into flashing all this, but can you guys tell me what doesn't work? What are the differences with custom roms?
From what I understand, it's similar to a custom ROM in terms of camera (not fully working), in terms of volte (doesn't work).
I'm willing to test but since it takes a lot of time on my side (need to fully backup etc...), I hope it works fine
Also, the gsi is the lastest version now that official P is out?
Sent from my OnePlus5 using XDA Labs
matssa said:
Hey guys I'm looking into flashing all this, but can you guys tell me what doesn't work? What are the differences with custom roms?
From what I understand, it's similar to a custom ROM in terms of camera (not fully working), in terms of volte (doesn't work).
I'm willing to test but since it takes a lot of time on my side (need to fully backup etc...), I hope it works fine
Also, the gsi is the lastest version now that official P is out?
Click to expand...
Click to collapse
You should ask rom related things in the rom thread https://forum.xda-developers.com/pr...-android-p-developer-preview-t3816659/page116
I am on open beta 15. I saw this video of formatting data, then installing mokee rom, mounting vendor and installing gsi image of dp5 of android p.
Things seemed pretty easy.
I did the exact steps. I am stuck at a point where i can't find vendor option in mount of twrp.
Could someone guide me on what can de done?
cosmic077 said:
I am on open beta 15. I saw this video of formatting data, then installing mokee rom, mounting vendor and installing gsi image of dp5 of android p.
Things seemed pretty easy.
I did the exact steps. I am stuck at a point where i can't find vendor option in mount of twrp.
Could someone guide me on what can de done?
Click to expand...
Click to collapse
Change twrp. I use blu spark twrp and if i remember right it's name had treble
Vika__ said:
Change twrp. I use blu spark twrp and if i remember right it's name had treble
Click to expand...
Click to collapse
Thanks bro. Lets see if that helps. I saw two videos and both used different twrps.
Today i ll try with blu spark treble twrp.
Lets see if it works.
is volte working ?
On PR1 i have one bug. When send screen to my Anycast , find it and when i select it show "connecting" but never connect. When try connect i see bright up and go to lock screen but don´t send image. Anymore have this problem ?. Any idea to solved it ?. I tried diferent kenels, update mokee vendor base , add entries to build.prop refer to this problem, ..... . Thanks.
Chnages on PR1 over DP5
Pho3nX said:
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE
Click to expand...
Click to collapse
Can you get some link detailing the Changelog about PR1, I am trying to find the changes in PR1 over DP5.
I treid DP5 on Oneplus 5 and it was still Highly unstable, Video Call feature missing without DUO, Front camera not workng in Ported Google Camera, and many other problems like only LTE no VoLTE support yet. So I am looking for changelog of PR1. ( or you could just mention few changes)
abhinav.kakku said:
Can you get some link detailing the Changelog about PR1, I am trying to find the changes in PR1 over DP5.
I treid DP5 on Oneplus 5 and it was still Highly unstable, Video Call feature missing without DUO, Front camera not workng in Ported Google Camera, and many other problems like only LTE no VoLTE support yet. So I am looking for changelog of PR1. ( or you could just mention few changes)
Click to expand...
Click to collapse
It's not an official OnePlus release, it's a ported rom, you have to expect problems.
djsubterrain said:
It's not an official OnePlus release, it's a ported rom, you have to expect problems.
Click to expand...
Click to collapse
I know that, Official will take much time now. Hope there is improvement over DP5
apparently we can use VOLTE fix from mi4 on our device
can anybody verify that ?
Android P PR1 stuck on Boot Loop to recovery on Oneplus5
I have followed the steps, Wipe device,
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery.
abhinav.kakku said:
I have followed the steps, Wipe device,
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery.
Click to expand...
Click to collapse
With wipe device you mean formatting data right? After completing mokee set up when you reboot to recovery swipe to factory reset and then flash A image and so on
seniug said:
With wipe device you mean formatting data right? After completing mokee set up when you reboot to recovery swipe to factory reset and then flash A image and so on
Click to expand...
Click to collapse
Agreed your steps need to be:
I have followed the steps, Wipe device, format data
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery
---------- Post added at 08:03 AM ---------- Previous post was at 08:00 AM ----------
archer797 said:
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?
Click to expand...
Click to collapse
Does anyone know what purpose the Mokee ROM portion of the setup serves on a technical level? Also has anyone noticed that the front camera works on snapchat but not in the google cam port? interesting stuff.