Hi everyone.
I have been facing fingerprint problem since yesterday. It was working before and suddenly it showed fingerprint wasn't working. I hard reset the phone and everything. When i try to register my fingerprint it shows its having an error with my fingerprint sensor. I looked into the sensors test and it showed null. Btw the fingerprint app is missing from my app list even when i looked at system apps. Has anyone came across this?! I looked through forums but no concrete solutions were available.
My phone model is SM-960N which has Exynos 9810 chipset. Can anyone extract and share the fingerprint apk of this model ?! It would be a huge help.
Thanks.
RaksheshSyal7 said:
Hi everyone.
I have been facing fingerprint problem since yesterday. It was working before and suddenly it showed fingerprint wasn't working. I hard reset the phone and everything. When i try to register my fingerprint it shows its having an error with my fingerprint sensor. I looked into the sensors test and it showed null. Btw the fingerprint app is missing from my app list even when i looked at system apps. Has anyone came across this?! I looked through forums but no concrete solutions were available.
My phone model is SM-960N which has Exynos 9810 chipset. Can anyone extract and share the fingerprint apk of this model ?! It would be a huge help.
Thanks.
Click to expand...
Click to collapse
U cant simple install...Why you dont flash new sw with ODIN?
Hi, have you found the solution for this error? I am also facing same issue.
Saikoko said:
Hi, have you found the solution for this error? I am also facing same issue.
Click to expand...
Click to collapse
It seems to work when u flash a new firmware through odin. I don't know exactly how that worked out though.
RaksheshSyal7 said:
It seems to work when u flash a new firmware through odin. I don't know exactly how that worked out though.
Click to expand...
Click to collapse
Did YOU flash a different firmware or your same OEM firmware?
Did the fingerprint app return?
Is it functioning properly?
Your post is vague.
Solved
pizza_pablo said:
Did YOU flash a different firmware or your same OEM firmware?
Did the fingerprint app return?
Is it functioning properly?
Your post is vague.
Click to expand...
Click to collapse
Sorry,been busy with work. After firmware update everything came back to normal. It definitely is working fine with me right now. I flashed the same firmware from sam firmware site and everything is ok for now.
RaksheshSyal7 said:
Sorry,been busy with work. After firmware update everything came back to normal. It definitely is working fine with me right now. I flashed the same firmware from sam firmware site and everything is ok for now.
Click to expand...
Click to collapse
No worries!
Glad to hear!
Good job!
That also happened to me after my home fell into water, somehow the water managed to enter the phone, my finger print is 'null' and the finger print is missing, I bought another fingerprint sensor but it's still not working,. Any other solutions out there??
Hi. Am I going to lose the Knox after flashing the firmware? I just heard that if you flashed a firmware you gonna lose knox secure and health services app? Thanks
Related
Hello
I have the 935X and flashed 935F software..
Also I have original baseband
Startup logo live demo unit is away ..
And Knox is still 0x0
my imei are in 00000000000000000 /01 but the phone have signal and the firngerprint work fine...
Only I need cp or modem from x unit to test if I have n
normal imei ( now it's 00000000000)
Baseband is inside phone so call must be possible
Anybody with a idea?
Sorry my english is very little, regards from Chile
Fingerprint dose'nt work
neo803 said:
Hello
I have the 935X and flashed 935F software..
Also I have original baseband
Startup logo live demo unit is away ..
And Knox is still 0x0
my imei are in 00000000000000000 /01 but the phone have signal and the firngerprint work fine...
Only I need cp or modem from x unit to test if I have n
normal imei ( now it's 00000000000)
Baseband is inside phone so call must be possible
Anybody with a idea?
Sorry my english is very little, regards from Chile
Click to expand...
Click to collapse
Dear Bro, I have Same model and Demo but after the Flash my finger print Sensor not working any Idea?
What 935F firmware exactly did you use?
simring said:
Dear Bro, I have Same model and Demo but after the Flash my finger print Sensor not working any Idea?
Click to expand...
Click to collapse
hello, most of the units have no fingerprint sensor, which is why I ask here if anyone has a backup of the EFS folder to try.
regards
mancaalberto said:
what 935f firmware exactly did you use?
Click to expand...
Click to collapse
mmb29k.g935fxxu1apaw
simring said:
mmb29k.g935fxxu1apaw
Click to expand...
Click to collapse
Thank you. I'm trying to get the fingerprint scanner to work, but I'm afraid it's a physical limitation. How did you get yours to work?
Sent from my SM-G935F using XDA-Developers mobile app
mancaalberto said:
Thank you. I'm trying to get the fingerprint scanner to work, but I'm afraid it's a physical limitation. How did you get yours to work?
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
I have no idea but this thing really need to study
simring said:
I have no idea but this thing really need to study
Click to expand...
Click to collapse
Thanks again. I tried downloading the same frimewire, but i couldnt find it. Could you please post the link from where you took it?
Sent from my SM-G935F using XDA-Developers mobile app
Here is the link
http://www.s7fanclub.com/2016/03/download-galaxy-s7-edge-stock-rom.html
simring said:
Here is the link
http://www.s7fanclub.com/2016/03/download-galaxy-s7-edge-stock-rom.html
Click to expand...
Click to collapse
Load of rubbish, prove it send a picture of the back of the phone that says live demo unit and the front of the phone sensor test *#0*# send a screenshot of the full page.
restless316485 said:
Load of rubbish, prove it send a picture of the back of the phone that says live demo unit and the front of the phone sensor test *#0*# send a screenshot of the full page.
Click to expand...
Click to collapse
its confirm Live demo while we test sensor all sensor working but fingerprint sensor showing version null. 0.0.0.0
I just had very weired problem and I need your help !!
My note 3 N9005 just stopped recognizing touches on the screen ! And only respond to S pen !!
I was on magma mx note7 port rom but I don't think it is rom related because even in the TWRP it is the same
Is that a hardware fault? Or There is a hope that it is a software related to modem or firmware?
I flashed RR but still the same issue!
Seeking your experience opinions
Thank you
Usual answer .
Restore to stock firmware first .
JJEgan said:
Usual answer .
Restore to stock firmware first .
Click to expand...
Click to collapse
Can you provide me a link to stock firmware??!
Google didn't help
aymahalawa said:
I just had very weired problem and I need your help !!
My note 3 N9005 just stopped recognizing touches on the screen ! And only respond to S pen !!
I was on magma mx note7 port rom but I don't think it is rom related because even in the TWRP it is the same
Is that a hardware fault? Or There is a hope that it is a software related to modem or firmware?
I flashed RR but still the same issue!
Seeking your experience opinions
Thank you
Click to expand...
Click to collapse
Yep. Try restoring do stock, change bootloader too... And also, fix partitions and download an app to test hardware!
My first try would be to flash a bootloader. I think you flashed a broken one or the wrong on! Be sure it really flashed, because sometimes even when Odin says everything went ok, iit may have failed. You have to take off your battery, go into download mode and do it.
In the old days, that happened to Brazilian Galaxy S1 and was related to bootloader!
Keep us updated, friend! Best of luck
aymahalawa said:
Can you provide me a link to stock firmware??!
Google didn't help
Click to expand...
Click to collapse
This forum .
Sammobile dot com
samsung-updates dot com .
OK , so now i have downloaded the latest official firmware and flashed it with odin .
Still the same problem persisted . the phone doesn't recognise the finger touch and only SPen is recognized!!!
Any thoughts guys ?
Sent from my Nexus 7 using Tapatalk
Service Repair center .
@sauliiin can you confirm the bootloader version is correct or i need to upgrade
Product Code: SM-N9005ZWEXSI
PDA: N9005XXUGBOEA
CSC: N9005OJVGBOE4
Baseband: N9005XXUGBOD3
Bootloader: N9005XXUGBOK9
Sent from my Nexus 7 using Tapatalk
i have this problem too but screen touch by it self some times and some time is ok
aymahalawa said:
@sauliiin can you confirm the bootloader version is correct or i need to upgrade
Product Code: SM-N9005ZWEXSI
PDA: N9005XXUGBOEA
CSC: N9005OJVGBOE4
Baseband: N9005XXUGBOD3
Bootloader: N9005XXUGBOK9
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Hi mate! Are you using an international sm N9005, right?
You are using an old bootloader. Try this one... I think is the latest: https://drive.google.com/open?id=0BwT0le3Vxg5OQ1VmakNkc19Od2c
Btw, have you tried a clean install of a stock Rom and no luck? Have you changed kernel?
sauliiin said:
Hi mate! Are you using an international sm N9005, right?
You are using an old bootloader. Try this one... I think is the latest: https://drive.google.com/open?id=0BwT0le3Vxg5OQ1VmakNkc19Od2c
Btw, have you tried a clean install of a stock Rom and no luck? Have you changed kernel?
Click to expand...
Click to collapse
Yes , the N9005 version .
I did clean install through odin for the firmware but the problem persist , i will try to update the bootloader through Odin and check , thanks for sharing the file
I don't want to give up because it doesn't make any sense for me , if the touch driver is damaged, how the Spen works like a charm ?!!!
aymahalawa said:
Yes , the N9005 version .
I did clean install through odin for the firmware but the problem persist , i will try to update the bootloader through Odin and check , thanks for sharing the file
I don't want to give up because it doesn't make any sense for me , if the touch driver is damaged, how the Spen works like a charm ?!!!
Click to expand...
Click to collapse
Yep! I agree with you! Best of luck!
Most likely the digitizer is faulty, get it replaced. As for the S Pen, it has nothing to do with the digitizer as it uses the S Pen sensor film which lies behind the screen AFAIK..
waqaswasil said:
Most likely the digitizer is faulty, get it replaced. As for the S Pen, it has nothing to do with the digitizer as it uses the S Pen sensor film which lies behind the screen AFAIK..
Click to expand...
Click to collapse
Do you think this could be related to root? I remember when I rooted my Sm-n900w8 on lollipop, after I rooted, the soft keys stopped responding and only S-PEN work, but the touchscreen itself was fine.
But there was a fix, you flash this file which fix the touch key. There is an xda thread on this but I'm not allowed to post links. But what I'm saying is, maybe there is a similar method to repair software?
I am afraid, it is gone.
As far as I know brother, the Galaxy Note series uses two digitizers (combined to one) with different voltages (minor difference, but enough the differentiate finger and S-Pen). One of your digitizer is dead.
You now need to try some weird steps for your weird issue.
First thing you can try is Battery Simulation. To perform battery simulation, press and hold the volume down key and power key for 10-20 seconds. Select power down from the menu you see. Turn your phone after 10 minutes and check if problem persists.
Second thing you can try is, take out all your data (backup), switch off your phone, completely charge it and remove battery. To make sure no static current stays inside the phone, while your battery is out, connect headphones, insert a cable with no charger (I repeat, without charger) on the other end and touch your screen with S-Pen. After you have done all this nonsense, remove cable and headphones, re-insert the S-Pen and battery.
After that, from ODIN, do a "Complete flashing" by selecting "Auto Reboot", "F. Reset Time" and "NAND Erase All".
Most threads do not recommend "NAND Erase" for some reaso. I always do it, and have been doing since 2 years without a problem. Rewards? My Note 3 is still blazing fast, though it involves lot of steps while installation which I do not advice to anyone else.
Summary: You need a screen replacement, but before that, give your last attempt, with "NAND Erase All".
Note: It's better to get the latest firmware for your carrier/country. Google SamMobile.
Sorry if nothing helps.
hi! I have the inverted problem. My s pen some times works some times is death, I mean sometime it doest recognize the deattachment of pen sometimes it does. I tried factory reset wipe cache and notting. but some times works..I dont know what is this =S any help?
Mobita said:
hi! I have the inverted problem. My s pen some times works some times is death, I mean sometime it doest recognize the deattachment of pen sometimes it does. I tried factory reset wipe cache and notting. but some times works..I dont know what is this =S any help?
Click to expand...
Click to collapse
That sounds like a hardware issue to me. I think what may have happened is the S-PEN detach sensor inside the phone broke or some connecting circuit broke. Either way it doesn't sound like a software issue to me....
RQYP said:
That sounds like a hardware issue to me. I think what may have happened is the S-PEN detach sensor inside the phone broke or some connecting circuit broke. Either way it doesn't sound like a software issue to me....
Click to expand...
Click to collapse
And could be fixed?
Mobita said:
And could be fixed?
Click to expand...
Click to collapse
Potentially. If it's a hardware issue, watch some YouTube tutorials and then buy the right parts and fix it. If it's a software issue try flashing the latest bootloader/modem/stock rom for your phone and see if it fixes things.
i tried to install a rom which was actually awful so i restored the sistem as i have it and now the fingerprint is not working. Im pretty sure its not a hardware problem as it was working perfect!
scriiby said:
i tried to install a rom which was actually awful so i restored the sistem as i have it and now the fingerprint is not working. Im pretty sure its not a hardware problem as it was working perfect!
Click to expand...
Click to collapse
@strongst Saw this? What's happening? 40% of people having the same issue! While installing a new ROM their fingerprint scanner stops working. How's that possible? What's the cause? We have to address this issue.
+∆bhijith said:
@strongst Saw this? What's happening? 40% of people having the same issue! While installing a new ROM their fingerprint scanner stops working. How's that possible? What's the cause? We have to address this issue.
Click to expand...
Click to collapse
Sorry but it's a hardware issue. 80% of members here got the same problem in the same période of time (fabrication issue)
Soon your home button will stop working too
Use nuclearom 1.1beta no issue with fingerprint
It's already discussed and a hardware issue cause there is no proof way to solve it with software. What's the real cause of this issue isn't known, but a faulty hardware piece is more sure then triggered by a rom update. How many people flash the same rom? Does everybodys fp reader stops working after flashing that rom? No!
its not hardware issue. you messed up downgrading or restoring a old version of lollipop. erase all partititions and flash stock via bootloader.
Hey guys.
I'm experiencing lot of bugs on my Galaxy S7 edge dual sim.
Some applications does not work, for example S Health, Samsung Pay.
I'm also experiencing problems, wherr I can't use SIM 2 for Mobile data. After setting it up, mobile data sometimes doesn't work.
Also few functions on side panel does not work properly.
Check screenshot in attachments, there are software informations.
Do I have official ROM ?
Or what can be problem? Is TouchWiz (or Samsung experience) so unstable? Or is it just my unique case?
Thanks for any help.
Download the app Phone Info and post some screens here..
Duchynko said:
Hey guys.
I'm experiencing lot of bugs on my Galaxy S7 edge dual sim.
Some applications does not work, for example S Health, Samsung Pay.
I'm also experiencing problems, wherr I can't use SIM 2 for Mobile data. After setting it up, mobile data sometimes doesn't work.
Also few functions on side panel does not work properly.
Check screenshot in attachments, there are software informations.
Do I have official ROM ?
Or what can be problem? Is TouchWiz (or Samsung experience) so unstable? Or is it just my unique case?
Thanks for any help.
Click to expand...
Click to collapse
You seem to use nougat rom, but still in the MM bootloader.
Follow @Bart3n 's suggestions and post results here
mashardpro said:
You seem to use nougat rom, but still in the MM bootloader.
Follow @Bart3n 's suggestions and post results here
Click to expand...
Click to collapse
Bart3n said:
Download the app Phone Info and post some screens here..
Click to expand...
Click to collapse
You can check it
/sorry for double post
Have you ever worked with Odin? Because this doesn't seem right...
Bart3n said:
Have you ever worked with Odin? Because this doesn't seem right...
Click to expand...
Click to collapse
With my old S5 I did.
I bought this S7 edge from second hand, so I don't know what he did with the phone. He didn't tell me anything about installing custom ROM or something.
What should I do now?
Duchynko said:
With my old S5 I did.
I bought this S7 edge from second hand, so I don't know what he did with the phone. He didn't tell me anything about installing custom ROM or something.
What should I do now?
Click to expand...
Click to collapse
Try to update your bl and cp to nougat
mashardpro said:
Try to update your bl and cp to nougat
Click to expand...
Click to collapse
Any links & instructions please
I am not sure how to do it.
Duchynko said:
Any links & instructions please
I am not sure how to do it.
Click to expand...
Click to collapse
Look sammobile. Complete including the procedure.
mashardpro said:
Look sammobile. Complete including the procedure.
Click to expand...
Click to collapse
Thank you. So all I have to do is install the newest firmware via odin, right ?:fingers-crossed:
/And one more question. Model SM-G935FD does not have Firmware for my country. I know it is designed for Southeast Asia and India, but .. May it cause any problems for me ? Like worse GPS locking or something. I dont think so, just want to make sure
The rom you have on the phone is for the G935F or Not G935FD version.
try installing an dual rom version instead of single rom version that may solve your problem. The G935F version will work but some apps may not work properly.
So I checked everything (BL,AP,CP,CSC) but UMS and started instalation.
/everything looks good, but I will let you know later after some using
Cosmic Blue said:
The rom you have on the phone is for the G935F or Not G935FD version.
try installing an dual rom version instead of single rom version that may solve your problem. The G935F version will work but some apps may not work properly.
Click to expand...
Click to collapse
That isn´t true my friend. I had ROM for my dual sim version (G935FD), but it was marshmallow ROM. I don´t know how it´s possible, when It was showing Android 7.0. in software informations.
//edit
Everything works now !
Guys, I know this is not the topic, but I do not know where to write. my g4plus bike does not work anymore nor a sensor, it stopped out of nowhere. I already did everything possible, about installing different roms or hard reset etc. Does anyone know how to solve it?
Please, post in English, not all people undestand portuguese and post the question in the right forum, this is only for guides or news, post it on the Question forum
Thanks
Guys, I know this is not the topic, but I do not know where to write. my g4plus bike does not work anymore nor a sensor, it stopped out of nowhere. I already did everything possible, about installing different roms or hard reset etc. Does anyone know how to solve it?
gabrielaraujo said:
Guys, I know this is not the topic, but I do not know where to write. my g4plus bike does not work anymore nor a sensor, it stopped out of nowhere. I already did everything possible, about installing different roms or hard reset etc. Does anyone know how to solve it?
Click to expand...
Click to collapse
Please give more details of you phone like rom version bootloader status, root etc.
Whar sensor of tour phone doesnt work, i dindnt understand what you said
Bootloader unlock and Stock rom 7.0 original. When I open the cpu-z to see the information and button on the sensors, there is not an irform, all in white
nor a sensor works, from the proximity to the gyroscope, nor a sensor is working
Ismael034 said:
Whar sensor of tour phone doesnt work, i dindnt understand what you said
Click to expand...
Click to collapse
Bootloader unlock and Stock rom 7.0 original. When I open the cpu-z to see the information and button on the sensors, there is not an irform, all in white
gabrielaraujo said:
Bootloader unlock and Stock rom 7.0 original. When I open the cpu-z to see the information and button on the sensors, there is not an irform, all in white
Click to expand...
Click to collapse
Best thing is factory reset and/or flashing stock fastboot rom. That's what you can try. Backup recommended!
strongst said:
Best thing is factory reset and/or flashing stock fastboot rom. That's what you can try. Backup recommended!
Click to expand...
Click to collapse
I've done all this, but none of it worked out, the sensors still do not pick up, it's like they're disabled: /
gabrielaraujo said:
I've done all this, but none of it worked out, the sensors still do not pick up, it's like they're disabled: /
Click to expand...
Click to collapse
Then consider a hardware problem. Claim warranty if possible.
There's no other solution you can do then reflashing the whole rom/firmware from start.
strongst said:
Then consider a hardware problem. Claim warranty if possible.
There's no other solution you can do then reflashing the whole rom/firmware from start.
Click to expand...
Click to collapse
I'm thinking that it might be hardware, but it's over:
Difficult to claim warranty if the bootloader if unlocked
Ismael034 said:
Difficult to claim warranty if the bootloader if unlocked
Click to expand...
Click to collapse
You can lock it again and several people here claimed warranty even with relocked bootloader. Not every repair center check the warranty. You can try it