Is there a way to take a s7 edge on g935aucs8crk1 and convert it to 935u everytime I try to flash using Odin on all of the different versions I've tried I get lkescapp.bin fail auth in odin.
I've tried prince comsy
13.12.3
3.12.10
3.13.1
Related
Ok so here's my issue
For a very long time since the G930U firmware was available to install, I've been using that. Well I decided to want to get my phone unlocked for GSM using those services but it needs Stock Firmware.
So I tried to restore to the latest G930P firmware and ODIN is giving a Volume size error for the system.img.ex4. I've tried now a couple different firmwares and no luck. Any idea?
The latest Firmware is PH7 I don't recommend it. PG1 on down are good to go. Extract zip stock firmware to a folder and add it in to Odin all the slots accordingly. BL AP CP CSC the last slot CSC is HOME_CSC not CSC_SPT and start flashing. It always works for me.
I ended up figuring it out. I had to find the stock G930P .PIT mapping's and re-partition because G930U ended up changing the sizes.
Oh good to know. Thank for sharing
Why do you not recommend PH7 update? I've heard it helps with battery life.
Could you share the pit file you used. I tried the same thing with a pit file i found online how ever since the pit i am able to flash bootloader but unable to flash system.ext4. Odin gives me a "failed (auth)" and neyjer the 930u version or the f2 or any of the other stock roms wont flash.... Help please
Don't you just love it when people "figure it out" and then don't share how? lol
Here... Since nobody gave you this. This may not be your problem.
https://drive.google.com/file/d/0BzyeAt2hy6XeenhWM2dNSU40TDA/view?usp=sharing
Hi,
I tried to flash a stock firmware today using odin, however it failed. On my phone it says custom boot binary blocked by fap lock, but i am flashing stock firmware only. I have never rooted or unlocked the bootloader. Now my phone is stuck in the downloading mode. How do i fix this or successfully flash?
Regards,
I tried everything, now i get a secure lock error?
To recap, i have a g935w08 and i was trying to flash the BTU firmware (G935F) which i downloaded from samfirm, i used all the BL, AP, CP, CSC (used regular CSC) and it refuses to work. I am using odin 3.12.
Who can help me with this?
Try odin 3.11.1 as it says on the download page, failing that, try and flash your original firmware.
Instructions at the bottom of this download page: https://www.sammobile.com/firmwares/download/116121/G935FXXU1BPLB_G935FBTU1BPK3_BTU/
I gave up. Could it be due to the fact that i am trying to flash a G935F firmware onto G935W?
yes that's very possible, in your post above you said you have a G935F ?
"To recap, i have a g935F and i was trying to flash the BTU firmware"
@Seanie280672 I have updated it now. Does anyone know if this is possible?
hi
my galaxy note 4 sm-n910g had a recent motherboard change through Samsung service. after about a month when I tried to update firmware it was not being completed and showed a message that I should approach service centre, I installed update myself using smartswitch. after about a week phone was not working and showed a message warranty bit kernel at top. I tried many ways to install firmware using kies, smartswitch and odin. oneclick root, cwm etc were installed and odin showed green pass. but firmware cannot be installed with any version of odin, I used odin 3.09, 3.10, 3.10.7, 3.12.3 etc. full copying is shown with odin 3.12.3 but fail at end and phone shows message 'secure check fail- modem'. service centre people say I have to change motherboard again. can I do anything to resolve this problem.
Maybe ? The motherboard they put in wasn't a "G" and the tars your trying to flash aren't working???
Sent from my trltespr using XDA-Developers Legacy app
I try to flash oreo on my galaxy s8 using odin v3.12 by princecomsy but no résultat when the flash start i get pass but nothing happened ( while installing i noticed no system or boot or recovery installing) i just get pass
To flash Oreo firmware you need to use Odin 3-v3.13.1.
Hello,
I'm trying to root my S7 edge running Android 8.0 and kingoroot as well as using CF autoroot didn't work. I am confident I have followed all the steps correctly and I have attempted this with odin3 versions 3.10.6, 3.10.7, 3.13.1 and a few others. I get to the part where I root it and it fails every time. The error message it gives is "unsupported dev_type" and SECURE CHECK FAIL: recovery. Does anyone know what I can try?
Thanks!
-Michael