[SOLUTION] Encryption unsuccessful after Format - LG G5 Guides, News, & Discussion

Hello
If any of you after unlocking bootloader and formatting in TWRP still can't access phone cause of unsuccessful encryption it's caused probably you've insalled "twrp-3.3.0-0-h850.img".
Try to use twrp-3.2.3-2-h850.img .
For me worked - hope it'll help someone

Thanks for this info, You help me a lot!

Ah
m1ko8 said:
Hello
If any of you after unlocking bootloader and formatting in TWRP still can't access phone cause of unsuccessful encryption it's caused probably you've insalled "twrp-3.3.0-0-h850.img".
Try to use twrp-3.2.3-2-h850.img .
For me worked - hope it'll help someone
Click to expand...
Click to collapse
Got stuck with twrp-3.3.1-0-h850.img
Will try twrp-3.2.3-2-h850.img now.
Update; IT WORKED!

jasonpremchand said:
Got stuck with twrp-3.3.1-0-h850.img
Will try twrp-3.2.3-2-h850.img now.
Update; IT WORKED!
Click to expand...
Click to collapse
Thank you so much !!!! I remained stucked with no effective solution for several weeks !
Getting back to this older version of TWRP did enable me to boot again : finally !

Yes, Thank you so much! All latest TWRP don't work.

Related

Secure Boot Error F320S!

Hello! I have a problem which I don't know how to fix, so I need some help! I'm running stock android 4.4 (20a) and have flashed CWM through Flashify, but every time I try to boot into recovery, I get this message:
"Secure booting error
Error: Boot Certification Verify!"
Recovery worked in android 4.2 (11g), but I messed my phone up, and flashed the latest .kdz-file for my phone. It was after that the recovery-problem appeard.
I've read some places about people with D802 who has this problem, but the fixes they've got only works for D802 and D800. So, how can I fix my F320S? I guess there are more people with the korean version who has stumbled upon this problem, so if you got a fix, please post it!
Excuse my typos if there are any!
Thank you!
LG G2 F320S
Put phone in download mode, and flash the stock KDZ.
If you cannot do this, then you are hard bricked. I had an LG Optimus G which I got a Secure Boot Error after flashing a compatible ROM using TWRP, and although it could get into download mode, it would never be seen as a COM Port in the computer again to it couldn't be seen by the Flash Tools software to restore KDZ.
But it is a stock image I've flashed... What causes the problem!?
Edit: I tried to put it in Download-mode, but the secure-boot error apeard there too... But the phone can't be bricked, as it's booting to Android and everything works...
Would this fix it if the developer made a version based on my aboot?
http://forum.xda-developers.com/showthread.php?t=2500441
Edit no.2: I pressed the wrong button-combination, so yes, I was able to access Download-mode, and it works like a charm!
Send with my LG G2 F320S!
Secure Boot Error D802
2minuutes said:
But it is a stock image I've flashed... What causes the problem!?
Edit: I tried to put it in Download-mode, but the secure-boot error apeard there too... But the phone can't be bricked, as it's booting to Android and everything works...
Would this fix it if the developer made a version based on my aboot?
http://forum.xda-developers.com/showthread.php?t=2500441
Edit no.2: I pressed the wrong button-combination, so yes, I was able to access Download-mode, and it works like a charm!
Send with my LG G2 F320S!
Click to expand...
Click to collapse
Did you ever fix this, and how? I just stumbled on to the same problem the same way. I've got a D802 international. Recovery is corrupted with the same error as yours. That was nonsense about being bricked above. I hate that when people give wrong info. Any help definitely appreciated.
notanymore said:
Did you ever fix this, and how? I just stumbled on to the same problem the same way. I've got a D802 international. Recovery is corrupted with the same error as yours. That was nonsense about being bricked above. I hate that when people give wrong info. Any help definitely appreciated.
Click to expand...
Click to collapse
I did not, but I've read a place where devs managed to roll back just the bootloader and in that way access recovery!
Secure Boot Error D802
2minuutes said:
I did not, but I've read a place where devs managed to roll back just the bootloader and in that way access recovery!
Click to expand...
Click to collapse
I'm wondering what happens if I do a factory reset? Trying to get up the nerve to do it. If not then I think the next best option is to wait for 4.4.3 or higher.
notanymore said:
I'm wondering what happens if I do a factory reset? Trying to get up the nerve to do it. If not then I think the next best option is to wait for 4.4.3 or higher.
Click to expand...
Click to collapse
I don't think a reset will fix it as it's not fixing any corrupt data. The problem lays in the bootloader. It's not able to boot into the recovery installed as if it was an earlier build. It looks like this is what you are looking for to be able to install a recovery the right way. I haven't tried it yet, tho.
Secure Boot Error D802
2minuutes said:
I don't think a reset will fix it as it's not fixing any corrupt data. The problem lays in the bootloader. It's not able to boot into the recovery installed as if it was an earlier build. It looks like this is what you are looking for to be able to install a recovery the right way. I haven't tried it yet, tho.
Click to expand...
Click to collapse
Ok thanks!
Secure Boot Error D802
2minuutes said:
I don't think a reset will fix it as it's not fixing any corrupt data. The problem lays in the bootloader. It's not able to boot into the recovery installed as if it was an earlier build. It looks like this is what you are looking for to be able to install a recovery the right way. I haven't tried it yet, tho.
Click to expand...
Click to collapse
It worked! I took the plunge and it worked immediately. I've got TWRP. I already had root so did not have to use the iroot. I just ran the autorec.apk and problem solved.
Dear sir
My lg f320L and in this phone i have cloudyG2_3.3 version
i wana flash my phone F320L30D
when i flashd 2 % it stop
i have security error in my phole
please HELP
sorry my english poor

Help fap lock bricked my phone

HELP!
My S7 Edge keeps getting into recovery mode and gets blocked from the FAP lock.
I screwed my phone.
I can only get into download mode but i don't know what to do to reset it or solve this damn issue.
HELP PLEASE!!!
This is why fapping is bad guys.
Give this a try OP http://www.androidpolice.com/2015/1...msung-phones-due-to-a-flaw-in-their-software/
Dameon87 said:
This is why fapping is bad guys.
Give this a try OP http://www.androidpolice.com/2015/1...msung-phones-due-to-a-flaw-in-their-software/
Click to expand...
Click to collapse
I thank you for the suggestion.
However i cannot get into recovery (otherwise it would be easy), only in download mode
On the splash screen it just says RECOVERY IS NOT SEANDROID ENFORICING and then the phone turns off.
I can get into download mode but i can't do anything else...
Rareba said:
I thank you for the suggestion.
However i cannot get into recovery (otherwise it would be easy), only in download mode
On the splash screen it just says RECOVERY IS NOT SEANDROID ENFORICING and then the phone turns off.
I can get into download mode but i can't do anything else...
Click to expand...
Click to collapse
I found this post...
http://forum.xda-developers.com/s7-edge/help/fap-lock-booy-help-t3396334
Maybe i can just flash one of the stock firmwares with ODIN and at least boot the phone, and disable the OEM option in the developer settings?
That may work. Sorry I don't have much experience on the matter. Disabling frp was probably the first thing I did to give me peace of mind. Give it a try!
Dameon87 said:
That may work. Sorry I don't have much experience on the matter. Disabling frp was probably the first thing I did to give me peace of mind. Give it a try!
Click to expand...
Click to collapse
Solved by Flashing a stock rom.
This video is a good example: https://www.youtube.com/watch?v=9qAX1xTRAGg
Rareba said:
Solved by Flashing a stock rom.
This video is a good example: https://www.youtube.com/watch?v=9qAX1xTRAGg
Click to expand...
Click to collapse
Glad to hear you got it fixed.
Dameon87 said:
Glad to hear you got it fixed.
Click to expand...
Click to collapse
Now the problem is that TWRP is installed but not working properly
Gotta fix that as well!
Happened to me a few weeks back. Download and flash stock with Odin, boot, put in your Google account details when asked (phone won't work without it), go into dev options and make sure OEM Unlock is selected. You're now good to go again to flash TWRP with Odin again.
Beefheart said:
Happened to me a few weeks back. Download and flash stock with Odin, boot, put in your Google account details when asked (phone won't work without it), go into dev options and make sure OEM Unlock is selected. You're now good to go again to flash TWRP with Odin again.
Click to expand...
Click to collapse
That's what i did!
However TWRP for some reason is installed but, aside of the fact that always asks about being read only or not every boot, i can't access any storage
Must be some weird permissions stuff!
Rareba said:
That's what i did!
However TWRP for some reason is installed but, aside of the fact that always asks about being read only or not every boot, i can't access any storage
Must be some weird permissions stuff!
Click to expand...
Click to collapse
Try searching over the forum, follow (ALL) the instructions on this post to get TWRP working properly. (All data will be lost so you'd better make a backup).
Rareba said:
That's what i did!
However TWRP for some reason is installed but, aside of the fact that always asks about being read only or not every boot, i can't access any storage
Must be some weird permissions stuff!
Click to expand...
Click to collapse
It's because, when you install stock back, the phone will be encrypted again. TWRP can't read Samsung encryption. In TWRP you will need to formate (not wipe) the data partition. As said above, you will lose everything.

LG G2 security error

hellooo everyone
i need ur help guys .. my phone stuck with lg logo and show that words""security error"" and keep rebooting ....
any solutions please ?
thanks
khalidou75 said:
my phone stuck with lg logo and show that words""security error"" and keep rebooting ....
Click to expand...
Click to collapse
What have you done before? A Simple reboot, OTA-update, tried to root, installed TWRP? Anyway... I've found a tutorial on YouTube:
https://youtu.be/4YZ0i6aFsfM
Jan Philipp said:
What have you done before? A Simple reboot, OTA-update, tried to root, installed TWRP? Anyway... I've found a tutorial on YouTube:
https://youtu.be/4YZ0i6aFsfM
Click to expand...
Click to collapse
thank you . i solve it

Infinite bootloop post-install december version

My mobile was updated with the December version and since then I have infinite bootloops
I've reinstalled the November version with myFlash but I'm still the same. I tried with tprw but i have some errors with the /cache partition
Can anybody help me?
Thanks
what december version?
ludditefornow said:
what december version?
Click to expand...
Click to collapse
7.12.7_7.1, after that, my movile bootloop every 30 secons more or less
Now, when i turn the mobile on, it tells me that the SIM is blocked, but I tried the SIM in another mobile and it works
A/B partition are there so if device is stuck in bootloop it should boot from dormant partition.
You have to flash stock firmware.
Try flashing the persist.img from every build that exists till now. If you manage to flash one of them the issue will be fixed. I've tested it myself.
cafernan said:
My mobile was updated with the December version and since then I have infinite bootloops
I've reinstalled the November version with myFlash but I'm still the same. I tried with tprw but i have some errors with the /cache partition
Can anybody help me?
Thanks
Click to expand...
Click to collapse
Please just follow the guide here to get it fixed: https://forum.xda-developers.com/mi-a1/how-to/ota-official-fastboot-image-n2g47h-7-12-t3728929
As it includes all necessary scripts for proper flashing it is secure to use
In worst case, you can also use the appropriate included script to factory reset at the same time when flashing. If nothing else helps, that should do the trick for you
Edwin Hamal said:
Try flashing the persist.img from every build that exists till now. If you manage to flash one of them the issue will be fixed. I've tested it myself.
Click to expand...
Click to collapse
I tried flashing persist.img, and it works!!!
Now I have 2 differents problems.
When I start my mobile, the SIM Pin page shows the message SIM CARD IS LOCKED - NO SERVICE. My sim works in another mobile
When I pu my pin, I get the message "preparing sdcard - Solving errors"
Please just do a full clean flash as recommended by me earlier and your issue should be gone. At least if they are firmware or software related.
After that do a clean flash and that issue should be fixed.
Edwin Hamal said:
After that do a clean flash and that issue should be fixed.
Click to expand...
Click to collapse
Excuse me. What do you want to say with "do a clean flash"?
Follow the guide I linked for you above. You have to use the flash_all script. So please have a look and give it a try.
Edwin Hamal said:
After that do a clean flash and that issue should be fixed.
Click to expand...
Click to collapse
Dont't works
It shows the same message SIM CARD IS LOCKED - NO SERVICE
Any help?
cafernan said:
Dont't works
It shows the same message SIM CARD IS LOCKED - NO SERVICE
Any help?
Click to expand...
Click to collapse
Shooting blindly here.
Have you tried another sim in your phone.
If another sim card works then have you tried changing your sim from carrier. It's easy.
Have you also tried a factory reset?
majamee said:
Have you also tried a factory reset?
Click to expand...
Click to collapse
Yes, and I flash boot and persist too. I think that it's possible a error with any .img inside my phone, but i don't now ...
My phone show me the page with de SIM Pin. I put the correct Pin, and after that phone don't connect with the network. I can't call because it's without service.
I tried the same SIM in another phone and it works. I tried diferents sim in my phone and all of them fail
Please, someone has any idea about what I need to do
Thanks
cafernan said:
Yes, and I flash boot and persist too. I think that it's possible a error with any .img inside my phone, but i don't now ...
My phone show me the page with de SIM Pin. I put the correct Pin, and after that phone don't connect with the network. I can't call because it's without service.
I tried the same SIM in another phone and it works. I tried diferents sim in my phone and all of them fail
Please, someone has any idea about what I need to do
Thanks
Click to expand...
Click to collapse
Have you tried the script to flash the full stock rom flash_all from https://forum.xda-developers.com/mi-a1/how-to/ota-official-fastboot-image-n2g47h-7-12-t3728929 here as well? If you only flashed the persist.img until now, you should give it a try.
majamee said:
Have you tried the script to flash the full stock rom flash_all from https://forum.xda-developers.com/mi-a1/how-to/ota-official-fastboot-image-n2g47h-7-12-t3728929 here as well? If you only flashed the persist.img until now, you should give it a try.
Click to expand...
Click to collapse
Thanks majamee but I flash all with MiFlash and it doesn't work, this isn't the problema
Finally I checked my IMEI and I discovered that it's 0.
Someone knows how can I recovery the phone's IMEI
Thanks
cafernan said:
Thanks majamee but I flash all with MiFlash and it doesn't work, this isn't the problema
Finally I checked my IMEI and I discovered that it's 0.
Someone knows how can I recovery the phone's IMEI
Thanks
Click to expand...
Click to collapse
http://lmgtfy.com/?q=qualcomm+recover+imei

Hanging on 'just a sec' during set up process...

Hello all. Thanks in advance if you can help...
atinw said:
Installing a rom on here has now completely messed up my phone. It wouldn't start up properly, so I did a factory reset, and have also used e-recovery to reinstall its original rom (German Voda, I think) but it still hangs on 'Just a sec' , just after connecting to wifi during the setup process...
any help gratefully received
Click to expand...
Click to collapse
I think it's connected with this problem i mentioned earlier...
atinw said:
i have installed it but i can't get the OEM unlock to enable. I swipe , add my password , click 'enable' but nothing happens'
Click to expand...
Click to collapse
HadTWRP installed...
As I said, help appreciated
update: the e-recovery has wiped TWRP, so now i am really screwed!!!
is there a hero out there?

Categories

Resources