Database Users

Help : con not link to PC!!

Hi , guys, now ,my X7500 can not link to My PC , the note is "unknow device, pls try again", i send the phone to the cellshop, the egngineer said ,the synchronization IC has been broken!
who can give a help ?
where are i can find some interanl pictures of X7500?

http://www.pdacenter.ru/razborka/razbor_htc_athena/

rorydaredkign said:
http://www.pdacenter.ru/razborka/razbor_htc_athena/
Click to expand...
Click to collapse
thanks, but i can not open the site, could you pls give me other adress?

dear, who can help me ?it is very urgent !!!!!

Who can help ?

My car's white - how fast does it go?
And now for some more detail:-
Is the error coming up from Windows, or ActiveSync?
What OS and ActiveSync version are you using?
Have you ever been able to sync?
What ROM is your device using?
Are you using USB or Bluetooth Sync?
If its ActiveSync, you could try deleting any existing profiles within the Application and trying again.
Have you tried both a soft and hard reset of the phone?
Have you tried uninstalling and reinstalling ActiveSync?
Have you got the latest version of ActiveSync?
Have you tried synchronising over bluetooth instead of USB (or vice-versa)?
Have you tried google to resolve your problem?

Digital.Diablo said:
My car's white - how fast does it go?
Click to expand...
Click to collapse
That made me laugh right out loud!

it is ok before 15th,Feb.the software and device is ok.
but some time ,the USB port is not stable , you need to put a book above the USB cable.
one day , the device can not link to PC whatever i shake the cable.i change
a new USB part of the device , but it can not working yet.
the repairer said, the control IC has broken , is it right ?

nmurphy said:
That made me laugh right out loud!
Click to expand...
Click to collapse
Tis an old quote passed down to me as a junior IT tech from the wizards of the mainframe, and illustrates the point perfectly I think.
Veron_fat - when you say you have "change a new USB part of the device", is that the USB cable, or the Mini-USB port on the device?? I had a fault with my first charger where the connection eventually went wrong within the connector on the cable - swapped it out with a new charger and all was well again. I have however also broken an Axim x50v sync port with too much flexing - the connector broke the solder ports on the mobo.
I'd be surprised if you'd broken the IC - can someone else advise if my memory is correct and the USB device controller is integrated into the main CPU. Is this also shared with the USB host controller? I'm thinking that if Veron_fat has the 4 in 1 USB cable, he can test that to see if it is the IC, or the port that is at fault.
I do think though Veron that you've buggered the port, and it will either be a resolder on the port by a skilled electronics engineer, or a new mobo.

Digital.Diablo said:
Tis an old quote passed down to me as a junior IT tech from the wizards of the mainframe, and illustrates the point perfectly I think.
Veron_fat - when you say you have "change a new USB part of the device", is that the USB cable, or the Mini-USB port on the device?? .........
Click to expand...
Click to collapse
1. it is the Mini usb port in device
2. i change more than 4 piece usb cable
3. you mean this divice have not the sperate IC for synchronization?
4. all information from the phone repairer ,i donot belive his voice , but i just want to get some picture of internal view of u1000 to check if there have some IC or something......

veron_fat said:
1. it is the Mini usb port in device
2. i change more than 4 piece usb cable
3. you mean this divice have not the sperate IC for synchronization?
4. all information from the phone repairer ,i donot belive his voice , but i just want to get some picture of internal view of u1000 to check if there have some IC or something......
Click to expand...
Click to collapse
Why not just send it back to HTC for repairs/diagnostics? It might only cost you shipping. Just my 2 cents.

tootallk2000 said:
Why not just send it back to HTC for repairs/diagnostics? It might only cost you shipping. Just my 2 cents.
Click to expand...
Click to collapse
yes, but i have not the guarantee, i am not sure if they can repair this device.
who can give me a adress for the X7500 internal picture!!!
i want to see the stomach!!

I have a PDF of a repair Manuel if you would like it. I uploaded to this link. I hope it helps...TJ
"http://www.mediafire.com/?baidzmnlgow"

TrekkerJmm said:
I have a PDF of a repair Manuel if you would like it. I uploaded to this link. I hope it helps...TJ
"http://www.mediafire.com/?baidzmnlgow"
Click to expand...
Click to collapse
thanks, try it!

usb connector broken

hi. is there someon in germany, austria or italy who is able to repair my
polaris?? the mini-usb connector is broken, I can not charge the battery or
get any connection.
I have found only one address who offer to repair the usb connector, but I do not want to send my polaris to USA to get the service.
please help if you have some tips or ideas.
thx

Sorry I can't help you, just wanted to say a had the same problem twice - fortunately my provider replaced the hardware without problems.
Good luck anyway!

Broken Mini USB
I just had this same problem with my Cruise. It is only 4 months old and I sent to HTC for warranty and they wanted to charge 400 to replace the motherboard and usb plug. They claimed it was abused. They need their heads examined.
HTC has bad customer service and warranty.

Hi Brunner, you might want to try http://www.mobilephonerepairs.co.uk/home.asp . They are based in London, UK and sending to/from Germany was no problem for me. Just mail to [email protected], explain your issue and ask for a repair price quote.
So far I have only bought a replacement LCD from them and not used their repair service - but will do so next week. Anyway, they were friendly and supportive, and the LCD arrived in good condition and well packaged. Overall a very good impression.

i have some expirience with HTC repair, and can say that the most problems in HTC are in main board - very unstable connections with chips and pcb.
try to tense unit left and right side while usb is connected.
one more - switch off unit (take off battery and pull in) and connect adapter - i am sure in this mode charging will go - this is separate chip doing this automaticly ,but when processor running can sw it off. Stay 1-2 hours and battery will go full.

thank you for your replies... I'll try to contatct the london adress (big thank to doctah).
to romensat: thank also for your , but it is so, that I am not able to connect the usb cable at all, because the little plastic peace into the connector is broken out an some pins are damaged.
regards
brunner

just curious: how did this end up?

USB connector broken..

Hi all,
my Athena fell down while charging (kiddies.....) - now it seems to me that the connector is broken somehow. I can't chrage the device anymore and don't get contact to my PC anymore.
Warranty exchange isn't possible due to customized ROM. What can I do ?
Dieter

PPC Techs repaired my HTC Universal when the USB connector broke, give them a try:
http://www.ppctechs.com/HTC-Advantage_895/repairs.htm

Thanks galt,
but seems to me a little bit far away.....
Would prefere a source to buy spares and do it by myself or have a repair service in Germany or even Europe...
Dieter

Sorry, I forgot to check your location... HTC might have a repair center in Europe...

dieterpapa said:
Thanks galt,
but seems to me a little bit far away.....
Would prefere a source to buy spares and do it by myself or have a repair service in Germany or even Europe...
Dieter
Click to expand...
Click to collapse
i don't know how it works with "The Phone warehouse" but here in the uk their parent company Carphone Warehouse have usually a flat fee for repairs, maybe ask The Phone Warehouse what they might charge ?

I think you can open and try to solder usb pin on your own.
its should not be that difficult task.
I have done this with my Motoming

Hello,
have already opened the device. Sadly it's not only a standard USB connector but a special HTC connector with about 10 connections...it's nearly impossible to re-solder
Dieter
But I'll ask phone warehouse in UK.

dieterpapa said:
Hello,
have already opened the device. Sadly it's not only a standard USB connector but a special HTC connector with about 10 connections...it's nearly impossible to re-solder
Dieter
But I'll ask phone warehouse in UK.
Click to expand...
Click to collapse
do it if you can as if you solder wrong pins than there would be a problem
and word impossible itself says i m possibles

Bad luck
dieterpapa said:
Hi all,
my Athena fell down while charging (kiddies.....) - now it seems to me that the connector is broken somehow. I can't chrage the device anymore and don't get contact to my PC anymore.
Warranty exchange isn't possible due to customized ROM. What can I do ?
Dieter
Click to expand...
Click to collapse
As a temp setup, why not get a docking base. they normally have a battery charging on them too. Keep you going until you find a repairer. they come up on ebay
Jay
.......Or THIS even?

I ripped the Wifi Wire inside the phone :(

anybody know where i can get a wlan coaxial cable for the touch hd???

Same here!
Did you find a solution?

how is that even possible??

Cetin said:
Same here!
Did you find a solution?
Click to expand...
Click to collapse
How on earth did you manage to get into the wire?
Anyway, just re-assemble your phone and make claim on your insurance

It´s happened while disassembling.
It´s reassembled back again and everything is working fine now after falling into swimming pool but just the coaxial cable inside is missing. I can choose now using the one for wifi or for gps.
Now it´s connected to wifi, more important for me.
But I am still needing a coaxial cable to connect GPS!
Please help!

anyone found this cable yet?

antenna help please

Hello thanks in advance for any help. I bought a metal case with glass and put it on. It really killed my signal. So I took the back off and cut the blue antenna wire to see if I could run it out side the case. That made things worse. Now I only get wife and emergency calling. I don't have any wire between the bottom antenna and top one. Do I just have to replace that wire. Or did I brake that whole bottom chip with the USB port. Speakers. And antenna.

makasouleater said:
Hello thanks in advance for any help. I bought a metal case with glass and put it on. It really killed my signal. So I took the back off and cut the blue antenna wire to see if I could run it out side the case. That made things worse. Now I only get wife and emergency calling. I don't have any wire between the bottom antenna and top one. Do I just have to replace that wire. Or did I brake that whole bottom chip with the USB port. Speakers. And antenna.
Click to expand...
Click to collapse
If your wife is calling u in emergency first go & Help her.

jdomadia said:
If your wife is calling u in emergency first go & Help her.
Click to expand...
Click to collapse
Haha I meant wifi

makasouleater said:
Haha I meant wifi
Click to expand...
Click to collapse
Lol,look at this video may Help you.
http://www.youtube.com/watch?v=kBedvTm1YGc

jdomadia said:
Lol,look at this video may Help you.
http://www.youtube.com/watch?v=kBedvTm1YGc
Click to expand...
Click to collapse
I have it tore down now. I am just wondering if the cellular needs to be connected to the top wifi part in order to work. Atm there is no wire that connects them and all I get is wifi and emergency calling.

makasouleater said:
I have it tore down now. I am just wondering if the cellular needs to be connected to the top wifi part in order to work. Atm there is no wire that connects them and all I get is wifi and emergency calling.
Click to expand...
Click to collapse
Nvm it is only 10 bucks for a new usb dock, mic, and antenna chip that goes on the bottom. I will just buy that and the antenna.