I ripped the Wifi Wire inside the phone :( - Touch HD General

anybody know where i can get a wlan coaxial cable for the touch hd???

Same here!
Did you find a solution?

how is that even possible??

Cetin said:
Same here!
Did you find a solution?
Click to expand...
Click to collapse
How on earth did you manage to get into the wire?
Anyway, just re-assemble your phone and make claim on your insurance

It´s happened while disassembling.
It´s reassembled back again and everything is working fine now after falling into swimming pool but just the coaxial cable inside is missing. I can choose now using the one for wifi or for gps.
Now it´s connected to wifi, more important for me.
But I am still needing a coaxial cable to connect GPS!
Please help!

anyone found this cable yet?

Related

Help : con not link to PC!!

Hi , guys, now ,my X7500 can not link to My PC , the note is "unknow device, pls try again", i send the phone to the cellshop, the egngineer said ,the synchronization IC has been broken!
who can give a help ?
where are i can find some interanl pictures of X7500?
http://www.pdacenter.ru/razborka/razbor_htc_athena/
rorydaredkign said:
http://www.pdacenter.ru/razborka/razbor_htc_athena/
Click to expand...
Click to collapse
thanks, but i can not open the site, could you pls give me other adress?
dear, who can help me ?it is very urgent !!!!!
Who can help ?
My car's white - how fast does it go?
And now for some more detail:-
Is the error coming up from Windows, or ActiveSync?
What OS and ActiveSync version are you using?
Have you ever been able to sync?
What ROM is your device using?
Are you using USB or Bluetooth Sync?
If its ActiveSync, you could try deleting any existing profiles within the Application and trying again.
Have you tried both a soft and hard reset of the phone?
Have you tried uninstalling and reinstalling ActiveSync?
Have you got the latest version of ActiveSync?
Have you tried synchronising over bluetooth instead of USB (or vice-versa)?
Have you tried google to resolve your problem?
Digital.Diablo said:
My car's white - how fast does it go?
Click to expand...
Click to collapse
That made me laugh right out loud!
it is ok before 15th,Feb.the software and device is ok.
but some time ,the USB port is not stable , you need to put a book above the USB cable.
one day , the device can not link to PC whatever i shake the cable.i change
a new USB part of the device , but it can not working yet.
the repairer said, the control IC has broken , is it right ?
nmurphy said:
That made me laugh right out loud!
Click to expand...
Click to collapse
Tis an old quote passed down to me as a junior IT tech from the wizards of the mainframe, and illustrates the point perfectly I think.
Veron_fat - when you say you have "change a new USB part of the device", is that the USB cable, or the Mini-USB port on the device?? I had a fault with my first charger where the connection eventually went wrong within the connector on the cable - swapped it out with a new charger and all was well again. I have however also broken an Axim x50v sync port with too much flexing - the connector broke the solder ports on the mobo.
I'd be surprised if you'd broken the IC - can someone else advise if my memory is correct and the USB device controller is integrated into the main CPU. Is this also shared with the USB host controller? I'm thinking that if Veron_fat has the 4 in 1 USB cable, he can test that to see if it is the IC, or the port that is at fault.
I do think though Veron that you've buggered the port, and it will either be a resolder on the port by a skilled electronics engineer, or a new mobo.
Digital.Diablo said:
Tis an old quote passed down to me as a junior IT tech from the wizards of the mainframe, and illustrates the point perfectly I think.
Veron_fat - when you say you have "change a new USB part of the device", is that the USB cable, or the Mini-USB port on the device?? .........
Click to expand...
Click to collapse
1. it is the Mini usb port in device
2. i change more than 4 piece usb cable
3. you mean this divice have not the sperate IC for synchronization?
4. all information from the phone repairer ,i donot belive his voice , but i just want to get some picture of internal view of u1000 to check if there have some IC or something......
veron_fat said:
1. it is the Mini usb port in device
2. i change more than 4 piece usb cable
3. you mean this divice have not the sperate IC for synchronization?
4. all information from the phone repairer ,i donot belive his voice , but i just want to get some picture of internal view of u1000 to check if there have some IC or something......
Click to expand...
Click to collapse
Why not just send it back to HTC for repairs/diagnostics? It might only cost you shipping. Just my 2 cents.
tootallk2000 said:
Why not just send it back to HTC for repairs/diagnostics? It might only cost you shipping. Just my 2 cents.
Click to expand...
Click to collapse
yes, but i have not the guarantee, i am not sure if they can repair this device.
who can give me a adress for the X7500 internal picture!!!
i want to see the stomach!!
I have a PDF of a repair Manuel if you would like it. I uploaded to this link. I hope it helps...TJ
"http://www.mediafire.com/?baidzmnlgow"
TrekkerJmm said:
I have a PDF of a repair Manuel if you would like it. I uploaded to this link. I hope it helps...TJ
"http://www.mediafire.com/?baidzmnlgow"
Click to expand...
Click to collapse
thanks, try it!

Will this Hardware Tweak really work for boosting wifi ?

Hello
i´have found this site http://pockethacks.com/boost-wifi-signal-on-your-pocket-pc/.
Does anyone think this will work ?
My problem is that my AP is upstairs (Level 2), my room is on Level 0, with my MDA Pro i get the wifi signal only on the toilet(!), but i want it in my other rooms too.
And i think, if this Hardware Modification will work it will solve my problem.
If it works......what do you think?
thanks for answers
asid
Yes asid, anything that by any means "boost" the signal -in this case by adding extra gain using another antenna- should work, how good? Well, that's another story.
Anyway, I considered myselft the idea of directly change the internal antennas (not just the WiFi oen, but also the GSM and the BT) with another ones made by me with fractal shapes, but I sold my good old uni, so, the rest is history...
Done it and it works very well!
I came across your post and had a little look at the tweak, seemed relativly straight forward and i just so happened to have an old nokia to pull apart for the arial.
The tweak took about 20 mins with the only things to watch out for being:...
the forth torque screw hidden under a tiny red sticker (you will see it! dont worry).
You need a very thin guaged wire as there is very little space inside.
After the tweak i have found a greatly improved wifi range anda lot less signal drop in general.
Well worth it, especially as you dont really need anything more than a t6 screwdriver, a small headed phillips and a very thin wire.
What if we connect the wifi antenna to the headphone socket? So then, if we need a boost to the wifi signal, we will plug in our headsets, and it will be an 1m long wifi antenna? Is that possible?
Is there any risk connecting the antenna to the headphone socket?
toxicdog said:
What if we connect the wifi antenna to the headphone socket? So then, if we need a boost to the wifi signal, we will plug in our headsets, and it will be an 1m long wifi antenna? Is that possible?
Is there any risk connecting the antenna to the headphone socket?
Click to expand...
Click to collapse
the headphone socket is not linked to wifi at all so this won't work.... and another thing is you may short circuit your device by plugging that in....
rajivshahi said:
the headphone socket is not linked to wifi at all so this won't work.... and another thing is you may short circuit your device by plugging that in....
Click to expand...
Click to collapse
I was just thinking on connecting one pin of the socket, and the wifi antenna together, with a wire, inside the device.
But if that makes a short circuit, its a bad idea.
Yes it may work.
I remember that originally mobile phones used this method to boost their signal. However, that was soon noted to be a bad idea, as it meant the radio signal was going straight into your ear ! I don't know if wifi is any less worse.
As for short circuit, I would think the worse that would happen is that you'd loose the signal, but the effect would not be permanent once you remove the connection again (however, I obviously cannot guarantee this)
Yea the problem is Uni having wireless b not g so i personally have this problem as some of the new modems are only g and a compatible ......
wish we could change the wifi with the new hardware from newnew phones....
Or i can use sd card with g capabilities but has to compromise with the storage then....
rajivshahi said:
Yea the problem is Uni having wireless b not g so i personally have this problem as some of the new modems are only g and a compatible ......
Click to expand...
Click to collapse
Uni can be made 802.11g compatable (but will not have the g speeds)
-Jonny- said:
Uni can be made 802.11g compatable (but will not have the g speeds)
Click to expand...
Click to collapse
is it a hardware change or software... i remember applying some software named wirelesslanbgon which didn't seem to work .....
It's a registry setting, as I was led to believe the Uni is capable of connecting to 802.11g. I thought all ROM builders put it in their ROM. Hold on, I'll see what I can dig up...
Ok, hopefully this will work - you'll still get 802.11b speeds (11 Mbit/s)
HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS: dot11SupportedRateMask=1
HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS: dot11SupportedRateMaskG=8
then soft-reset
Let us know if it works (I've got 802.11b router, so can't test it)
Did anyone ever test this to see if it works?

Anybody else got this problem ?

my phone will not do ANYTHING requiring usb other than charge , my phone charges perfectly either from wall or pc , but will not mount usb,tether,htc sync, etc.
i love music , so i used to always need to mount to add a new album or etc. and since atleast a month ago my phone is extremly picky about mounting usb, if im EVEN LUCKY to get it in a right position for it to mount usb,
just yesterday i was suprised because my 4th time wiggling and flipping , and bending cable finally got my phone to mount and transfer files at a MAX , 2.2 mbps speed, thats half of what it used to give me before the problems happened , i am assuming the problem is my usb (has to be atleast 92% of the cause)
i just want to know if theres a fix , or a legit work around , im okay with wifi mounts , i just need one thats straightforward , and probally has basic file managing .
thanks in advance for any replies
Sent from my Mytouch 4G Running Capychimps Sense 3.5 rom (v.4.0)
i have a solution for now , im currently using swiFTP , and its exactly what i was looking for , but still does anybody else have this problem ? or know how to fix it ? , ive also tried mounting in recovery, that doesnt work either
Sent from my Mytouch 4G Running Capychimps Sense 3.5 rom (v.4.0)
This problem is most likely physical - one of the D+/D- USB data wire pair is disconnected. In this case the phone will still detect VBUS (voltage on the USB) since the power wires aren't disconnected, will use it for charging, but won't be able to establish any kind of USB communication.
Jack_R1 said:
This problem is most likely physical - one of the D+/D- USB data wire pair is disconnected. In this case the phone will still detect VBUS (voltage on the USB) since the power wires aren't disconnected, will use it for charging, but won't be able to establish any kind of USB communication.
Click to expand...
Click to collapse
is there a way to fix that ? am i gonna have to pick around my usb port ? or take apart my phone ?
Sent from my Mytouch 4G Running Capychimps Sense 3.5 rom (v.4.0)
If it's indeed a physical problem - you'll need to do both, I'm afraid.
First, you can look inside your microUSB plug and see if the 5 tiny contact strips are visible and not dirty or obstructed by possibly broken piece of plastic ahead of them. If you have a tiny flat screwdriver - you can try to use it to scrub the dirt off the contact strips.
And if everything looks ok there - the problem might be in the soldering of the USB slot to the board, in which case you'll have to disassemble the phone and re-solder the contact pins to the board.

[Q] wifi antenna coax cable

Ok so replaced the digitizer on my phone and I I have no idea how but the wire that helps your wifi work broke and I cant seem to find one anywhere... Anyone have ANY ideas. This is really random and sorry if its been answered before. Thanks.

antenna help please

Hello thanks in advance for any help. I bought a metal case with glass and put it on. It really killed my signal. So I took the back off and cut the blue antenna wire to see if I could run it out side the case. That made things worse. Now I only get wife and emergency calling. I don't have any wire between the bottom antenna and top one. Do I just have to replace that wire. Or did I brake that whole bottom chip with the USB port. Speakers. And antenna.
makasouleater said:
Hello thanks in advance for any help. I bought a metal case with glass and put it on. It really killed my signal. So I took the back off and cut the blue antenna wire to see if I could run it out side the case. That made things worse. Now I only get wife and emergency calling. I don't have any wire between the bottom antenna and top one. Do I just have to replace that wire. Or did I brake that whole bottom chip with the USB port. Speakers. And antenna.
Click to expand...
Click to collapse
If your wife is calling u in emergency first go & Help her.
jdomadia said:
If your wife is calling u in emergency first go & Help her.
Click to expand...
Click to collapse
Haha I meant wifi
makasouleater said:
Haha I meant wifi
Click to expand...
Click to collapse
Lol,look at this video may Help you.
http://www.youtube.com/watch?v=kBedvTm1YGc
jdomadia said:
Lol,look at this video may Help you.
http://www.youtube.com/watch?v=kBedvTm1YGc
Click to expand...
Click to collapse
I have it tore down now. I am just wondering if the cellular needs to be connected to the top wifi part in order to work. Atm there is no wire that connects them and all I get is wifi and emergency calling.
makasouleater said:
I have it tore down now. I am just wondering if the cellular needs to be connected to the top wifi part in order to work. Atm there is no wire that connects them and all I get is wifi and emergency calling.
Click to expand...
Click to collapse
Nvm it is only 10 bucks for a new usb dock, mic, and antenna chip that goes on the bottom. I will just buy that and the antenna.

Resources