hi
I'm having an issue with debranding my Wildfire
what i did
1-) create a goldcard.
3-) Download RUU_Buzz_HTC_WWE_1.25.405.1_Radio_13.45.55.24_3.35.15.31_release_142189_signed.
3-) Turn off my phone. Power on my phone while holding volume down and power button. This got me to the bootloader. then my pc said
windows needs to install driver software for your android 1.0
lol
iv searched and i cant find the answer to this any help would be appreciated
thanks in advance
phil
hello
Im owner of O2 recently
other day I wanted to change PDA-ROM in my O2 and I used your flashing guide to do it
but on last step , when Octans shold detect my Omnia , it does not
I think that might be a driver problem because when I want to change the drivers for O2 to special drivers for win7 x32 bit
system only shows me a message that newest drivers are already installed - even with driver enforcement OFF
what to do ??
p.s. sorry for my english
I managed to install proper drivers
but now Octans hangs when I plug O2 to PC
I have that triangle in download mode but nothing happens
hello too all friends
plz guide me how I can install app and custom rom in this phone
OS version:7.0.7403.0
firemware revison number:2424.10.10.6
hardware revisin number:3.15.0.4
radio software version:2424.10.10.6
radio hardware revison:0.0.0.800
bootloader version:4.10.19
chip soc version:0.36.2.0
afghan-gsm-mastermind said:
hello too all friends
plz guide me how I can install app and custom rom in this phone
OS version:7.0.7403.0
firemware revison number:2424.10.10.6
hardware revisin number:3.15.0.4
radio software version:2424.10.10.6
radio hardware revison:0.0.0.800
bootloader version:4.10.19
chip soc version:0.36.2.0
Click to expand...
Click to collapse
Important: custom ROMs, only if you have a SIM free device (no SIM lock)!
- Step by step flash guide and read here if you have trouble to install it with a 64-bit desktop system
is from my [mi7ROM] [05.04.2012][multi lang] mi7ROM_v1/v1b tango 8773
thanks for replay
now I don't know my phone is sim locked or unlocked but I am using in afghanistan plz help can I install th MGLDR or no thanks
afghan-gsm-mastermind said:
thanks for replay
now I don't know my phone is sim locked or unlocked but I am using in afghanistan plz help can I install th MGLDR or no thanks
Click to expand...
Click to collapse
can you test a different carrier sim card, if it works? when works is a sim unlocked/sim free device- then you can do step by step flash guide.
If not a sim free device- a custom rom will not works!
hello yes it works with all other network sim card I am doing step by step my problem is when I want MGLDR it gives error in step 3 I mean in connect step althogh phon is in DLMODE. all drivers installed but software can't detect the phone I have teyed on win7 also in xp sp3 also plz let me know where is the problem I am using my laptop hp nc8340
If your're using x64 OS you'll need x64 drivers.
Sent from my OMNIA7 using XDA Windows Phone 7 App
Make sure, you have installed WindowsMobileDeviceCenter
if you have trouble to install it with a 64-bit windows 7 pc system:
read here and here and here
hello allready i have installed windows mobile device center 61 and all driver is installed but my cant detect by DFT MGLDR here is the erore
[Error Description]:
Please make sure that your device is connected to your computer.
also make sure that right drivers are installed (SAMSUNG_USB_Driver_for_Mobile_Phones.exe)
Try to connect device to different USB port and also you can try to reboot PC.
Also you can try to exclude USB hubs.
[Info]: USBWorkDMLI_SAM.cpp (173)
also SAMSUNG_USB_Driver_for_Mobile_Phones.exe installed
i am also having the same issue..
i did following
first install the usb driver on your pc, then set phone in downloadmode: power off your device. press and HOLD camera button and Volume plus button and power button.
--when i ran DFT_MLI_SAM1.exe it took forever while connecting to the phone, finally i had to reboot (remove battery).
i am using Windows 7 PC (32bit)
can anybody help me..
mirolg said:
can you test a different carrier sim card, if it works? when works is a sim unlocked/sim free device- then you can do step by step flash guide.
If not a sim free device- a custom rom will not works!
Click to expand...
Click to collapse
Hi Miro, I WAS able to install your ROM (mi7rom_v1b_6 lang_05.04.12_tango 8773_FW_11.11.2) to my Omnia 7 even it is network locked (only that lock in Diagnosis is enabled, all others are off, see picture attached).
How about that?
BTW, your Rom is working perfectly!
hi to all i installed the rom i put my omnia in download mode via 3 resister 100k thanx for all who helped me
i need to somehow get my produck id i tried useing huawei product id program and i tried putting it on the chinese site with imei and seriel number but it don't work, i had to choose the option y300-0000 i saw that it worked for another guy with a p9 lite but it will not work for me, my phone is a L31 europe (uk) model and i need an unlock code because i flashed oeminfo and custom.bin like a guide on the fourm said to do and it bricked my phone and locked the bootloader so i cannot flash anything all i need to do is get the product id so i can unlock it and get my phone back please help me, dload wont work as i have twrp but i cannot access it and erecovery wont work because the os is nrd90m testkeys. i could give you the oem info and cust.bin tommrow but anything for now that could help would be nice.
So my problem is that after a failed rom installation TWRP couldn´t mount data and i had to format the full data partition. after that i installed a wrong stock rom and now i cant unlock the bootloader because i cant get the unlock code from huawei and i cant flash twrp on my phone.
Huawei P9 lite - VNS-L21 (slovakia)
Can you tell us what was your original build and what stock ROM you flashed so others don't face the same problem?
BTW, if you have original box, you can find Serial number and IMEI there, and you can generate Product ID with your IMEI here: imei24.com
Then get the unlock code from Huawei. And write the unlock code down for future reference.
to access bootloader (just learned this !!! thanks to hassan mirza XD !! )
01 - turn off your phone
02 - plug the usb cable on your phone side only DONT plug it on your computer (yet)
03 - press volume - (maintain it )
04 - plug the usb on your PC !!!
works every time and it's just awesome !
I got it fixed by using product id generator just had to use a different model name. But thx for the replies