Related
Debranded, Debloated, Deodexed H901-10c ROM for T-Mobile LG V10 (LG-H901) - Clean & Stable
Thanks go to @Rydah805 for deodexing the stock ROM and being my guinea pig while I was fixing all the broken features.
Thanks also go to @KOLIOXDA for being my guinea pig while troubleshooting installation issues.
Features:
WiFi Calling works with Xposed (even in Airplane Mode)
Second screen works with Xposed (no more force-closes during calls)
No spyware (Adapt Client and Carrier IQ removed)
No T-Mobile apps
No Google apps (except Play Store, Search, Text-to-Speech, and Google Play Services)
Stock LG boot and shutdown animations
No boot sound (boots silently)
No Chrome customizations (Chrome homepage no longer forced to t-mobile.com)
Stock recovery restore disabled (does not overwrite TWRP on reboot)
External storage permissions fix (all apps can write to MicroSD card)
WiFi connectivity fix by @ZDeuce2
AOSP Emoji font
Over 100 additional alarm, ringtone, and notification sounds from Nexus and Samsung phones
Busybox 1.24.1
SuperSU v2.65 stable
Stock 10c kernel and boot image
Download (built Feb. 08, 2016): https://onedrive.live.com/redir?resid=FE4478E2ABDFD5FC!1082&authkey=!AMAKMBsK8gCEhH0&ithint=file,zip
Changes in this build: Updated SuperSU to 2.65 stable.
Before you install, read below:
Safe to install over stock ROM (odexed or deodexed), no need to factory-reset, unless you're compelled to do so by your inner demons.
Compatible with Xposed v79-sdk22-arm64 and later (sdk22-arm64 ONLY). Do NOT install any earlier versions or other variants of the Framework. You must use Xposed Installer 3.0 alpha 4.
Compatible with P_Toti's G4TweaksBox.
Compatible with the LG Apps Theme Engine.
The T-Mobile Device Unlock app does not work on this ROM and is not included. The Play Store version does not work, either. To SIM-unlock your phone, flash the stock ROM, unlock (SIM-unlock is forever and not ROM-dependent), then flash my ROM.
To get back Google and T-Mobile (except Device Unlock) apps, install them from the Play Store. They all work. They were removed because system apps are not Greenifiable, plus they were causing problems when deodexed.
If you use an ad blocker that modifies your hosts file (such as AdAway), you must reapply your ad-blocking filters as this ROM overwrites your customized hosts file with a stock hosts file.
Do NOT install the "Second Screen Fix" ZIP, second screen works fine in this ROM with and without Xposed. The "Second Screen Fix" is only for odexed ROMs and will break the second screen in this ROM.
This ROM removes any mods you have installed. If you want to reinstall them, they MUST be made for a deodexed stock ROM. Mods for odexed or non-stock ROMs may cause force-closes or a bootloop (flash them at your own risk).
If you're still seeing My T-Mobile, Lookout, or the other apps in your app drawer after installing my ROM, those are updates that have been installed from the Play Store - uninstall them manually like any other user app.
DO NOT USE "FIX PERMISSIONS" IN TWRP. TWRP has no idea what permissions are correct for your phone and will screw them up, resulting in random force-closes in various apps. If you did it, you will need to wipe the entire /data partition (not just factory reset) and reflash the ROM.
If Hangouts crashes when you receive a message or call, it's because it can't find one or more notification or ringtone audio files. Go into your phone's Sound settings and re-select your notification and ringtone sounds, then go into Hangouts settings and re-select the ringtone and notification sound for each type of notification (Hangouts call, Hangouts message, Google Voice call, Google Voice message, and so on).
DO NOT INSTALL PowerNap/WakeLockManager. You will get random reboots and corrupt internal storage, since WakeLockManager randomly hard-crashes the entire ART virtual machine.
To disable the OTA notification: http://forum.xda-developers.com/showpost.php?p=66304926&postcount=1002
Installation:
WARNING: Do NOT install over a custom ROM. You will get a bootloop/force-close loop.
Copy ZIP file to phone.
Boot into TWRP.
If clean-installing, factory-reset the phone. The installer wipes the system partition automatically.
Install the ZIP.
If you want Xposed, install it now (use only v79-sdk22-arm64 or later).
Reboot.
WARNING: Do NOT install mods for other ROMs on this ROM. You will get a bootloop/force-close loop.
Do not reuse this ROM without my permission - ask first and give credit where it's due!
Enjoy!
PS. I will begin work on the Marshmallow version of my ROM once we have an official way of flashing TWRP on the Marshmallow bootloader. I want the upgrade process to be "Flash the MM KDZ, install TWRP, flash my ROM." Until then, sit tight!
So we don't factory reset or wipe anything? What if we have mods flashed as well?
baySF said:
So we don't factory reset or wipe anything? What if we have mods flashed as well?
Click to expand...
Click to collapse
No Factory Reset OR Wipe,just flash over what you have ATM.
Make a backup of your present set-up before flashing though,just in case something else pops up.
EDIT:
Removed my previous statement regarding mods/add-ons,they'll need to be re-flashed & only de-odexed mods will work per siraltus (ROM OP)
baySF said:
So we don't factory reset or wipe anything? What if we have mods flashed as well?
Click to expand...
Click to collapse
If you have mods flashed, this will remove them, so you will have to reflash them - but only if they're made for a deodexed stock ROM. If they're made for an odexed or custom ROM, they will likely not work, so flash at your own risk.
KOLIOXDA said:
No Factory Reset OR Wipe,just flash over what you have ATM.
Make a backup of your present set-up before flashing though,just in case something else pops up.
EDIT:
A flash over a factory reset would probably work,I don't see why it wouldn't,but,it's probably not necessary.
I didn't reset or wipe anything & I'm doing just fine.
I don't have Xposed or any sound mods installed,but,my bet is you shouldn't have any problem flashing over a set-up with Xposed or any other mods.
Click to expand...
Click to collapse
The ZIP wipes the /system partition automatically so there is no need to wipe it manually.
In fact, if you wipe it manually, the ZIP will fail because TWRP will lock the /system partition for an unspecified amount of time and you will need to reboot TWRP before installing the ZIP.
If you want to clean-install this, then do a factory reset, reboot TWRP, then install this ZIP. I updated instructions in OP to reflect this.
Thanks!! I'll be checking this out shortly!! :highfive:
so we need to flash a stock rom first?
Just making sure, because I'm currently on black hole... Sorry, replied earlier, but son got sick again so I didn't see the other replies...
Sent from my LG-H901 using Tapatalk
ZDeuce2 said:
so we need to flash a stock rom first?
Just making sure, because I'm currently on black hole...
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
No, read the instructions under "To clean-flash".
siraltus said:
No, read the instructions under "To clean-flash".
Click to expand...
Click to collapse
Sorry, first read it right after you posted op... Then my son got sick again, so I didn't hit send for a while... Lol.
Sent from my LG-H901 using Tapatalk
ZDeuce2 said:
Sorry, first read it right after you posted op... Then my son got sick again, so I didn't hit send for a while... Lol.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
Oh, sorry, yeah I rewrote most of OP in the past hour, LOL
Is it possible to change the DPI of the ROM without all the stock apps going crazy? I'm not sure of the status of xposed so I'm assuming thats outta the picture right now
_-..zKiLLA..-_ said:
Is it possible to change the DPI of the ROM without all the stock apps going crazy? I'm not sure of the status of xposed so I'm assuming thats outta the picture right now
Click to expand...
Click to collapse
The ROM is fully compatible with Xposed v79 SDK22 arm64.
No idea about changing the DPI. I don't recommend it as it seems to break things on this phone.
Dear Sir. Altus,
Thank you for the clean upload, and directions. Currently I am running Rydah805's deodexed rom that you were kind enough to work on fixing wifi calling, etc.
My question is: Is this rom different from Rydah805's V. 1.2.2 as stability and features goes? Would you recommend dirty flashing it over his rom?
Thank you all for your hard work and Happy Holidays
Best,
Bob
bobobobicsek said:
Dear Sir. Altus,
Thank you for the clean upload, and directions. Currently I am running Rydah805's deodexed rom that you were kind enough to work on fixing wifi calling, etc.
My question is: Is this rom different from Rydah805's V. 1.2.2 as stability and features goes? Would you recommend dirty flashing it over his rom?
Thank you all for your hard work and Happy Holidays
Best,
Bob
Click to expand...
Click to collapse
You're welcome. Yes, you should flash this over his ROM. I took his deodexed base and fixed everything that was broken in it (WiFi, Hotspot, power management, other stuff), and rather than cluttering the old thread, I started a new thread with a 100% tested build and clear instructions. I debloated and debranded it, added a few useful modifications, plus I made about 30ish corrections to broken permissions and SELinux contexts that were likely causing problems in his ROM that we had yet not discovered (the power management stuff was likely not functioning properly due to being denied proper privileges). Read the OP for a list of features and modifications.
siraltus said:
You're welcome. Yes, you should flash this over his ROM. I took his deodexed base and fixed everything that was broken in it (WiFi, Hotspot, power management, other stuff), and rather than cluttering the old thread, I and started a new thread with a 100% tested build and clear instructions. I debloated and debranded it, added a few useful modifications, plus I made about 30ish corrections to broken permissions and SELinux contexts that were likely causing problems in his ROM that we had yet not discovered (the power management stuff was likely not functioning properly due to being denied proper privileges). Read the OP for a list of features and modifications.
Click to expand...
Click to collapse
Thank you again! Dirty Flashing now
Xposed
Will this Rom have the second screen fix once I install Xposed?
Thanks for your hard work.
mkrunk12 said:
Will this Rom have the second screen fix once I install Xposed?
Thanks for your hard work.
Click to expand...
Click to collapse
You're welcome. There is no need for that, second screen works fine in this ROM with Xposed and without. The "second screen fix" is only required on odexed ROMs. Updated OP to reflect this.
I'm having this weird issue where the screen will become tinted, almost like there's a pop-up or the notification bar is pulled down. It'll usually go away after a second or if I tap somewhere on the screen, but it's kinda frustrating.
Sent from my LG-H901 using Tapatalk
TheJesus said:
I'm having this weird issue where the screen will become tinted, almost like there's a pop-up or the notification bar is pulled down. It'll usually go away after a second or if I tap somewhere on the screen, but it's kinda frustrating.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
I think you posted in the wrong thread. You want to post in the Troubleshooting forum.
siraltus said:
I think you posted in the wrong thread. You want to post in the Troubleshooting forum.
Click to expand...
Click to collapse
No, I was the second one to install it over in the original thread and I didn't have the issue with the actual stock ROM.
I'm Posting this because of all the confusion I see on the different forums on how to get this working. This WILL WORK as I've personally tested on three different versions of Android on the Nexus 6p, Samsung S3 and HP Touchpad.
The underlined steps are the gist of the process....
How to Install Viper4Android 2.5.0.5 on 6.x 7.0, 7.1
Download ViPER4Android_2.5.0.5_guitardedhero.zip
here's a personal google drive link
DOWNLOAD IT HERE https://drive.google.com/file/d/0B3qV-scfklSkZEg0MDdZY3J4ZXM/view?usp=sharing
Boot into TWRP recovery and install/flash the ViPER4Android_2.5.0.5_guitardedhero.zip from recovery.
Reboot phone.
Use a file explorer with root access (Root explorer)
Go to the /vendor/etc/ directory on the device and rename audio_effects.conf to audio_effects.conf.bak (IF THE FILE EXISTS)
Open ViPER4Android FX
You may get a notification to install V4A driver. Select YES.
It may take some time to install V4A driver, it's doing its job and will finish soon. If Android gives an error that the app has stuck/stopped, select the wait option, don't force close it.
Make SURE that you've given Viper4Android Storage permissions
or you won't be able to load or save profiles
Check under Driver Status (in Viper4Android) to make sure it's enabled and processing. Like this: https://drive.google.com/file/d/0B3qV-scfklSkbGJMb0JkOWdwX0E/view?usp=sharing
Once the Driver installed message shows on screen, reboot.
CREDIT TO guitardedhero and androiding.how for making it simple and me for being pissed at the confusion to get this simple mod working for folks.
Most of this guide's steps were modified/originated from http://androiding.how/install-viper4android-nougat/
I attempted to simplify the steps because of all the confusion I see on forums, and make the instructions less wordy and more precise.
This works for you please just give me a thanks I've been on here for too many damn years to not have more than 17 thanks. Good luck everybody enjoy Android it's awesome
Can I get a copy of your audio.effect file? I don't have one I deleted it by mistake trying to edit it. Thanks
troyd28 said:
Can I get a copy of your audio.effect file? I don't have one I deleted it by mistake trying to edit it. Thanks
Click to expand...
Click to collapse
Never needed to do anything with that file other than rename it before installing the Viper4android driver. If it's a fresh flash you should be good to go. Or you could just reflash the rom on top to fix any weird stuff you might have done trying to get it to work. It's really not that difficult to get this mod installed/set up.
My current ROM doesn't even have that file in vendor/etc if that helps.
lmt1979 said:
Never needed to do anything with that file. If it's a fresh flash you should be good to go. Or you could just reflash the rom on top to fix any weird stuff you might have done trying to get it to work. It's really not that difficult to get this mod installed/set up.
My current ROM doesn't even have that file in vendor/etc if that helps.
Click to expand...
Click to collapse
Yea I tried reflash on top but the file is completely gone it doesn't come back I just need it to edit it to .bak or I don't need that file at all?
troyd28 said:
Yea I tried reflash on top but the file is completely gone it doesn't come back I just need it to edit it to .bak or I don't need that file at all?
Click to expand...
Click to collapse
I don't think you need it at all. But always do backups before messing with things.
lmt1979 said:
Never needed to do anything with that file other than rename it before installing the Viper4android driver. If it's a fresh flash you should be good to go. Or you could just reflash the rom on top to fix any weird stuff you might have done trying to get it to work. It's really not that difficult to get this mod installed/set up.
My current ROM doesn't even have that file in vendor/etc if that helps.
Click to expand...
Click to collapse
lmt1979 said:
I don't think you need it at all. But always do backups before messing with things.
Click to expand...
Click to collapse
Yea I kinda screwed up on that part but I'll try to see if it works now without that file that you said to edit.
troyd28 said:
Yea I kinda screwed up on that part but I'll try to see if it works now without that file that you said to edit.
Click to expand...
Click to collapse
It should, if not do a backup of your Rom, your apps and a backup with your launcher's backup utility and there's no worries. Then do a clean flash of the rom.
I just switched to Nova launcher from Apex and it will basically restore your widget locations even..it really makes it easy to clean flash. I'll dirty flash sometimes but if there's any funny business, back up and get a good clean rom flash going..
You should provide a download link. Had to search a bit to find it.
Sent from my iPad using Tapatalk Pro
Sonel Prabhakaran said:
You should provide a download link. Had to search a bit to find it.
Sent from my iPad using Tapatalk Pro
Click to expand...
Click to collapse
Which download link? The first one? It should be available/shared with anyone.
Just tested it with Internet Explorer and it brought it up fine.
lmt1979 said:
Which download link? The first one? It should be available/shared with anyone.
Click to expand...
Click to collapse
Oops! Speed read this thread. Misread that.
What is different about this and just installing deuteronomy zip https://www.androidfilehost.com/?fid=529152257862677226
I got it also working by doing the same as you describe here?!
jochem86 said:
What is different about this and just installing deuteronomy zip https://www.androidfilehost.com/?fid=529152257862677226
I got it also working by doing the same as you describe here?!
Click to expand...
Click to collapse
The package I use is much simpler. It was provided by guitaredhero and doesn't include all of the other config files. I've not had luck with those nor tested those. The ARISE ZIPS simply haven't worked for me. If those work for you by all means use them. The smaller package has worked for me on numerous devices and android builds.
Simpler is better in my opinion. The old viper zips didn't require 20 + files to function.
Good luck!
Nougat 7.1.1 latest build nmf26f
Supersu and twrp(no kernel or rom)
Rooted just for adaway and v4a ,your method works,but for me it didnt install driver said i had no root,had to reboot once after changing the filename to audio effects.conf.bak and then it was installed own ,didnt ask to install when i opened the app
gobblegobbler said:
Nougat 7.1.1 latest build nmf26f
Supersu and twrp(no kernel or rom)
Rooted just for adaway and v4a ,your method works,but for me it didnt install driver said i had no root,had to reboot once after changing the filename to audio effects.conf.bak and then it was installed own ,didnt ask to install when i opened the app
Click to expand...
Click to collapse
Hi, just sharing. Installing viper mod has been slightly tricky for me since nougat. I like Leviticus 1.3 and have it running with nmf26f. I always install viper after setting everything up and doing a back up since it's near impossible to get rid of the files once installed.
1. Install busy box stericson. Reboot.
2. Rename audio effects.con.bak Reboot.
3. Finally install 1.3.
4. Install black player from play, insert headphones and press play.
5. Open viper app and hooray, no drivers not installed message.
If I do not reboot after every step, it's almost guaranteed.
When enable for first time, music will disappear for a sec before hearing a slight difference. Adjust to your liking from there. I noticed if the music doesn't mute for that sec, Dolby atmos will just be lifeless when enabled or when switching to speaker mode and back to headset, no processing after.
Really weird.
Also, if developer options not enabled before installation, drivers won't install.
Learned from plenty of wipes and restoration.
Alternatively, there is a way to do this the systemless mode using Magisk.
Just install the Viper4Android module thats on the Magisk Manager app,
then I made a module that changes the "audio_policy_configuration.xml" file for the one I modded, using this reference http://forum.xda-developers.com/showpost.php?p=68859212&postcount=23811
It works for all except on soundlcloud.
I have 2 diferent modules for 7.0 and 7.1.1 stock images if you need them
Papote3 said:
Alternatively, there is a way to do this the systemless mode using Magisk.
Just install the Viper4Android module thats on the Magisk Manager app,
then I made a module that changes the "audio_policy_configuration.xml" file for the one I modded, using this reference http://forum.xda-developers.com/showpost.php?p=68859212&postcount=23811
It works for all except on soundlcloud.
I have 2 diferent modules for 7.0 and 7.1.1 stock images if you need them
Click to expand...
Click to collapse
Hi, does this make the mod system wide except sound cloud? If so, could you share the 7.1.1? Thanks.
tropical cactus said:
Hi, does this make the mod system wide except sound cloud? If so, could you share the 7.1.1? Thanks.
Click to expand...
Click to collapse
It works on all the apps I've tried.
Here's the magisk module, install using the magisk manager
http://cloud.tapatalk.com/s/584aa591ae861/v4a_fix_v2_7.1.1.zip
Papote3 said:
It works on all the apps I've tried.
Here's the magisk module, install using the magisk manager
http://cloud.tapatalk.com/s/584aa591ae861/v4a_fix_v2_7.1.1.zip
Click to expand...
Click to collapse
Err, not sure what magisk is. Never used it before. Can't find it as an app in play. Would appreciate some help. Thanks.
tropical cactus said:
Err, not sure what magisk is. Never used it before. Can't find it as an app in play. Would appreciate some help. Thanks.
Click to expand...
Click to collapse
Start here:
http://forum.xda-developers.com/showthread.php?t=3473445
Basically magisk is similar to Xposed in that it can add mods to your ROM without having to flash entire Roms.
Magisk does not touch system, so magisk modules are systemless. Read the forum to find out
You basically flash magisk.zip and Magisk PHH Superuser in recovery,
Then install PHH Superuser app from play store
Then magisk manager apk from XDA
But please read first
Papote3 said:
Start here:
http://forum.xda-developers.com/showthread.php?t=3473445
Basically magisk is similar to Xposed in that it can add mods to your ROM without having to flash entire Roms.
Magisk does not touch system, so magisk modules are systemless. Read the forum to find out
You basically flash magisk.zip and Magisk PHH Superuser in recovery,
Then install PHH Superuser app from play store
Then magisk manager apk from XDA
But please read first
Click to expand...
Click to collapse
Thanks. I flashed superSU to root via twrp earlier on. Don't know what it means to flash it systemless. If I flash PHH superuser, will I be able to continue to use chainfire's flash fire to install official ROMs later? Been using it to upgrade since 7.0. I've used xposed mods a lot previously, so this magisk manager is like xposed app where you can download modules and install and enable them?
Prerequisites:
Make sure your bootloader is unlocked
Make sure you are rooted and have latest SuperSU installed
Make sure you have the latest TWRP installed as your recovery
Once the prerequisites are complete you may proceed at you own risk.
Download Xposed 3.1.1
Apkmirror link
Install Xposed 3.1.1 FIRST
(Do not flash Xposed first or you might bootloop!)
Download the uninstaller (xposed-uninstaller-20160829-arm64.zip) from here.
Direct link
Download the installer (xposed-v87-sdk23-arm64.zip) from here.
Direct link
Transfer the files downloaded above to your phone if downloaded from PC.
(Skip this if all files have been downloaded from your 1+3t)
Reboot to TWRP
(Press the volume up button at boot, scroll down with volume down to "Recovery", press power to select.
Flash xposed-v87-sdk23-arm64.zip
Wipe cache and Dalvik cache to be safe.
Profit! :good: You now have Xposed, but remember, with great power comes great responsibility.
TL;DR for experts:
Get root and TWRP
Install Xposed 3.1.1
Flash xposed-v87-sdk23-arm64.zip
Keep the arm64 uninstaller in case any module(s) misbehave.
Troubleshooting:
If your phone is thrown into bootloop after installing/activating a new module, simply flash the uninstaller downloaded above.
If you guys would like to see a list of modules that work, let me know!
Big thanks to Rovo89, OnePlus and XDA
Here are the modules I use:
Amplify: Battery enhancements
Assistant Enabler: Google Assistant, not just for the Pixel
DisableFlagSecure: Screenshots everywhere
FingerprintEnabler: use fingerprint to unlock after reboot or when a device administrator app locked the phone
GravityBox: Circle battery, center clock, hide Vibrate icon, double tap to sleep status bar, force media volume control.
Notification Slider by Seveilith: change the slider functions (only app that worked for me, others did not overwrite system settings)
RootCloak: hide root from most apps
SNAPPREFS: Snapchat with extras
Vibration Tuner: change the intensity of vibrations
Partial Compatibility:
Android N-ify: quicksettings are not modified, and white screen overlay appears at volume change but notifications do get N-ified (including direct replies!)
Modules I have tried but do not work:
Hide VoLTE Icon
NFCIconRemover
What do you mean by do not flasg xposed first or you might bootloop? You can flash xposrd first as well. But the best wah is always, Install from xposed app itself. No need of flashing anything manually.
ram4ufriends said:
What do you mean by do not flasg xposed first or you might bootloop? You can flash xposrd first as well. But the best wah is always, Install from xposed app itself. No need of flashing anything manually.
Click to expand...
Click to collapse
My 1+3t bootlooped quite a few times while trying to install Xposed on it. Just giving a heads up and sharing the way that worked for me..
Thanks, that was indeed quite helpful !
I had quite some struggle with getting Xposed (based on systemless Magisk) to work without bootloops - without success.
With your instructions it worked out very nicely, albeit not systemless. But at least I have a working phone
@thesm4rt1 thanks for the guide , any chance to give us a list of the "must have" modules that are working for the OnePlus3T ?
I havent used xposed in years lol. since my Samsung galaxy 3/4 cuz of Knox and locked bl. limited exploits if I remember correctly..
Thanks for you time making this guide and post.
pvillasuso said:
@thesm4rt1 thanks for the guide , any chance to give us a list of the "must have" modules that are working for the OnePlus3T ?
Click to expand...
Click to collapse
seconded. Tempted to install xposed for the first time so a list would be useful
pvillasuso said:
@thesm4rt1 thanks for the guide , any chance to give us a list of the "must have" modules that are working for the OnePlus3T ?
Click to expand...
Click to collapse
PaKii94 said:
seconded. Tempted to install xposed for the first time so a list would be useful
Click to expand...
Click to collapse
This list is legit:http://forum.xda-developers.com/oneplus-3/themes/oneplus-3-xposed-modules-t3409137
@thesm4rt1 It is recommended to wipe cache&dalvik cache after flashing the xposed zip.Add it your instructions.
pvillasuso said:
@thesm4rt1 thanks for the guide , any chance to give us a list of the "must have" modules that are working for the OnePlus3T ?
Click to expand...
Click to collapse
PaKii94 said:
seconded. Tempted to install xposed for the first time so a list would be useful
Click to expand...
Click to collapse
I will try to make a list of the ones I have tried and which ones were successful tomorrow!
obamadictator said:
I havent used xposed in years lol. since my Samsung galaxy 3/4 cuz of Knox and locked bl. limited exploits if I remember correctly..
Thanks for you time making this guide and post.
Click to expand...
Click to collapse
You're welcome, glad I could be of help!
v7 said:
This list is legit:http://forum.xda-developers.com/oneplus-3/themes/oneplus-3-xposed-modules-t3409137
Click to expand...
Click to collapse
Not all of those work with the 3t. The quicksettings have been modified so Android N-ify mod (for example) does not change them while still changing the notifications.
v7 said:
@thesm4rt1 It is recommended to wipe cache&dalvik cache after flashing the xposed zip.Add it your instructions.
Click to expand...
Click to collapse
The Xposed zip does this itself.
thesm4rt1 said:
The Xposed zip does this itself.
Click to expand...
Click to collapse
Not sure about this.I couldn't find it in the flash script.
AFAIK wiping cache/dalvik manually after the zip is required.
v7 said:
Not sure about this.I couldn't find it in the flash script.
AFAIK wiping cache/dalvik manually after the zip is required.
Click to expand...
Click to collapse
Hmm, mine did. Had to wait for all the apps to go through the optimization process.
Either way, added the wipe recommendation, thanks!
pvillasuso said:
@thesm4rt1 thanks for the guide , any chance to give us a list of the "must have" modules that are working for the OnePlus3T ?
Click to expand...
Click to collapse
PaKii94 said:
seconded. Tempted to install xposed for the first time so a list would be useful
Click to expand...
Click to collapse
Added a list of the modules I use to the first comment
thesm4rt1 said:
Added a list of the modules I use to the first comment
Click to expand...
Click to collapse
I really really appreciate it, seeing what works def getting gravity box, snap, and maybe root cloak (Snapchat doesn't let rooted devices log in lol, I made back up with titanium backup)
Nice everything is working without a hiccup ty (for device not me)
I Installer xposed on my 3T and experienced lags and Battery drain after that, anyone Else has this issue?
Also the fingerprint Sensor took about 10seconds sometomes, uninstalled and everything Works normally now
Pharrax said:
I Installer xposed on my 3T and experienced lags and Battery drain after that, anyone Else has this issue?
Also the fingerprint Sensor took about 10seconds sometomes, uninstalled and everything Works normally now
Click to expand...
Click to collapse
Which modules are you activating?
GrandMasterB said:
Which modules are you activating?
Click to expand...
Click to collapse
Had:
Adblocker
Snapprefs
xInsta
Zoom for Instagram
Forcedoze
StopSwichDelay
Lucky Patcher
No lag or battery drain for me
Just got my new phone yesterday. Been out of the modding game for a while. I went from t mobile to international sim unlocked. Have TWRP installed 3.2.3 blue 9.91 and magisk 19. Everything went smooth. I installed some modules and didn't pass safety net. Disabled modules rebooted still didn't pass. I Uninstaller magisk 19 so I can flash 18 because I read there is a safety net fix for v18 but when I go into TWRP my files are random names. What exactly do I need to do to get everything running good with safety net and how do I prevent safety net from failing? Also which TWRP should I flash so I don't have this problem. At the end of the day I just want to be on stable OOS with magisk and safety net passing. Thanks for all the help in advanced.
Sent from my [device_name] using XDA-Developers Legacy app
This may help.
Start with this post for TWRP : https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482
SEARCH for flashing with Android 9.xx, onePlus 6 & Our 6T have TWO slots A & B and a whole bunch of partitions, things are 'different' from the old methods and require relearning to successfully flash recovery, ROMS, keeping root and encryption, etc;
It took me a couple of attempts and the MSMTool but I think I have some grasp of what the process' are now, we live we learn, we search.
All Devs have my utmost respect and thanks for their hard work, efforts and sharing of the spoils.
THANKS DEVS
itsmix said:
Start with this post for TWRP : https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482
SEARCH for flashing with Android 9.xx, onePlus 6 & Our 6T have TWO slots A & B and a whole bunch of partitions, things are 'different' from the old methods and require relearning to successfully flash recovery, ROMS, keeping root and encryption, etc;
It took me a couple of attempts and the MSMTool but I think I have some grasp of what the process' are now, we live we learn, we search.
All Devs have my utmost respect and thanks for their hard work, efforts and sharing of the spoils.
THANKS DEVS
Click to expand...
Click to collapse
I followed a video on YouTube but I guess I need to flash a newer TWRP and magisk again. Thanks for the reply. The devs are killing it with this phone!!
Sent from my [device_name] using XDA-Developers Legacy app
Before all that, open Magisk Manager, then menu(top left 3 lines), toggle Magisk Hide. Also make sure you hiding every single item with Google in the name.(show system apps)
schmeggy929 said:
Before all that, open Magisk Manager, then menu(top left 3 lines), toggle Magisk Hide. Also make sure you hiding every single item with Google in the name.(show system apps)
Click to expand...
Click to collapse
I was just about to flash anew twrp. Downloaded everything on my pc and then turned off my phone now it is stuck on The bootloader is unlocked screen. What do I do? Also windows tells me that the device I connected has malfunctioned
Edit: Ok so I got out of that screen by holding Volume up and the power botton. Then it shut off and booted normal. I can't hide magisk because as of right now magisk is not installed but the manager is. So I'm trying to flash twrp and then flash Magisk 18.1 stable instead of v19. Do I just fastboot twrp and then flash twrp and then restart twrp back into recovery correct? And then flash magisk?
i7vSa7vi7y said:
I was just about to flash anew twrp. Downloaded everything on my pc and then turned off my phone now it is stuck on The bootloader is unlocked screen. What do I do? Also windows tells me that the device I connected has malfunctioned
Edit: Ok so I got out of that screen by holding Volume up and the power botton. Then it shut off and booted normal. I can't hide magisk because as of right now magisk is not installed but the manager is. So I'm trying to flash twrp and then flash Magisk 18.1 stable instead of v19. Do I just fastboot twrp and then flash twrp and then restart twrp back into recovery correct? And then flash magisk?
Click to expand...
Click to collapse
yes you can fastboot TWRP and then Flash the latest TWRP. reboot back to TWRP and flash 18.1, I recommend v19 though, but try that first.
schmeggy929 said:
yes you can fastboot TWRP and then Flash the latest TWRP. reboot back to TWRP and flash 18.1, I recommend v19 though, but try that first.
Click to expand...
Click to collapse
Ok I did flash v19. Everything went smooth. Now Im going to create a backup. So how can I keep safteynet in good standing?
i7vSa7vi7y said:
Ok I did flash v19. Everything went smooth. Now Im going to create a backup. So how can I keep safteynet in good standing?
Click to expand...
Click to collapse
OK as I stated, go to Magisk hide from Menu under Superuser, hit 3 dots top right and show system apps. Check everything that has Google in the name. Then go into Settings and toggle Magisk Hide off then on again. And then test Safety Net.
Thanks I hid everything google man it was kinda a pain lol thank you all. Anything I should be aware of to lose safetynet?
i7vSa7vi7y said:
Thanks I hid everything google man it was kinda a pain lol thank you all. Anything I should be aware of to lose safetynet?
Click to expand...
Click to collapse
Flash the modules you like then reboot and toggle Magisk Hide, it's usually something you have to do after every reboot. If it fails SafetyNet just remove module.
schmeggy929 said:
Flash the modules you like then reboot and toggle Magisk Hide, it's usually something you have to do after every reboot. If it fails SafetyNet just remove module.
Click to expand...
Click to collapse
Thanks for all your help I'm happy now. I got some nice good modules. Didn't pass safety but as soon as I toggled hide Magik it passed. Thank you once again and much appreciated to the devs. Cannot thank you guys enough.
Sent from my [device_name] using XDA-Developers Legacy app
When I used v18.x, SafetyNet would initially pass but after some time, usually a few hours, if I check again it would fail, even if nothing changed in that time. Toggling Magisk Hide off then back on would get it to pass, but I found myself obsessively checking several times a day & it got really annoying. I reverted to v.17.3 and don't have this issue. Only problem is Google Pay no longer works. I read that the latest Magisk fixes the GPay issue, but I don't want to deal with the SafetyNet issue just for that. Rather do without GPay.
Once I get the OOS update, I'm gonna completely uninstall Magisk & XPosed, run the update then try v.19. Hoping everything will work as it should, SafetyNet passes consistently & GPay works.
sharksfan7 said:
When I used v18.x, SafetyNet would initially pass but after some time, usually a few hours, if I check again it would fail, even if nothing changed in that time. Toggling Magisk Hide off then back on would get it to pass, but I found myself obsessively checking several times a day & it got really annoying. I reverted to v.17.3 and don't have this issue. Only problem is Google Pay no longer works. I read that the latest Magisk fixes the GPay issue, but I don't want to deal with the SafetyNet issue just for that. Rather do without GPay.
Once I get the OOS update, I'm gonna completely uninstall Magisk & XPosed, run the update then try v.19. Hoping everything will work as it should, SafetyNet passes consistently & GPay works.
Click to expand...
Click to collapse
Yeah every now and then I have to reset. Kinda annoying but not to big of a hassle
Sent from my [device_name] using XDA-Developers Legacy app
schmeggy929 said:
Before all that, open Magisk Manager, then menu(top left 3 lines), toggle Magisk Hide. Also make sure you hiding every single item with Google in the name.(show system apps)
Click to expand...
Click to collapse
So now that I have magisk and safety net is good I'm rooted I have TWRP and I'm on Oxygen Os 9.0.11. This is a T Mobile 6T but flashed to the international. How do I install Ota? Do I need to update a certain way or disable anything prior? I'm only interested in stable builds.
Sent from my OnePlus 6T using XDA-Developers Legacy app
i7vSa7vi7y said:
So now that I have magisk and safety net is good I'm rooted I have TWRP and I'm on Oxygen Os 9.0.11. This is a T Mobile 6T but flashed to the international. How do I install Ota? Do I need to update a certain way or disable anything prior? I'm only interested in stable builds.
Sent from my OnePlus 6T using XDA-Developers Legacy app
Click to expand...
Click to collapse
Follow the thread here. https://forum.xda-developers.com/oneplus-6t/how-to/official-oxygenos-9-0-4-ota-oneplus-6t-t3860953
I have IN2023 latest OTA oxygen OS 11.0.1.1.INI11BA.
After rooting on magisk canary (as well as beta) I can neither enable gestures nor hide the Navbar (in system buttons and gestures). (see picture)
Hold powerbutton to open the menu also doesn't work (it simple turns the power off, changing to google assistant does work)
How to solve this, did I do something wrong or is it a bug?
henk-jan said:
I have IN2023 latest OTA oxygen OS 11.0.1.1.INI11BA.
After rooting on magisk canary (as well as beta) I can neither enable gestures nor hide the Navbar (in system buttons and gestures). (see picture)
Hold powerbutton to open the menu also doesn't work (it simple turns the power off, changing to google assistant does work)
How to solve this, did I do something wrong or is it a bug?
Click to expand...
Click to collapse
What modules have you got installed??
I noticed my center clock mod broke gestures too.
Also if you have frozen or uninstalled the OnePlus launcher this too breaks gestures.
Chances are it's a mod that broke it or freezing the OOS launcher..
But then again it's only just came out so who knows what's going on at the moment
dladz said:
What modules have you got installed??
I noticed my center clock mod broke gestures too.
Also if you have frozen or uninstalled the OnePlus launcher this too breaks gestures.
Chances are it's a mod that broke it or freezing the OOS launcher..
But then again it's only just came out so who knows what's going on at the moment
Click to expand...
Click to collapse
Thanks for the reply. The centre clock mod works fine. I use nova launcher and indeed freezing the OOS launcher when switching to it
It all happens before any mod is installed.
Your answer sugests there's a bug in Magisk comparing to the latest OTA
henk-jan said:
Thanks for the reply. The centre clock mod works fine. I use nova launcher and indeed freezing the OOS launcher when switching to it
It all happens before any mod is installed.
Your answer sugests there's a bug in Magisk comparing to the latest OTA
Click to expand...
Click to collapse
In regards to the centre clock mod no it's due to the apks used not being the most up to date.
In regards to your issue, the only way to find out what it is is to remove modules then try again. If it goes away then install one at a time, obviously unfreeze the OOS launcher too
dladz said:
In regards to the centre clock mod no it's due to the apks used not being the most up to date.
In regards to your issue, the only way to find out what it is is to remove modules then try again. If it goes away then install one at a time, obviously unfreeze the OOS launcher too
Click to expand...
Click to collapse
Maybe you've been to quick: I wrote it happens before any mod is set. It doesn't happen without root. (and everything else is the same)
As long as I'm the only one I have to start from scratch, otherwise I'll wait till a solution is found. (I guess from John Wu)
Regards, Henk-Jan
henk-jan said:
Maybe you've been to quick: I wrote it happens before any mod is set. It doesn't happen without root. (and everything else is the same)
As long as I'm the only one I have to start from scratch, otherwise I'll wait till a solution is found. (I guess from John Wu)
Regards, Henk-Jan
Click to expand...
Click to collapse
Oh really??
So you're not running any modules, and no other mods or changes?
Then youre alone with this problem..
It's possible that some modules were left behind before the update. Beyond that I'm not sure buddy, mines working fine unless I make the aforementioned changes.
dladz said:
Oh really??
So you're not running any modules, and no other mods or changes?
Then youre alone with this problem..
It's possible that some modules were left behind before the update. Beyond that I'm not sure buddy, mines working fine unless I make the aforementioned changes.
Click to expand...
Click to collapse
Thanks, then I'll start from scratch
henk-jan said:
Thanks, then I'll start from scratch
Click to expand...
Click to collapse
Bit of a long shot but try this
1. Connect your phone to your computer.
2. Reboot the phone, then during the boot animation have this command ready and run via ADB.
adb wait-for-device shell magisk --remove-modules
3. Reboot, cycle the gestures to nav bar and see if it works.
That'll eliminate any left over modules, just incase, even if they're disabled from magisk they can still be left behind, have seen this a few times.
solved
dladz said:
Bit of a long shot but try this
1. Connect your phone to your computer.
2. Reboot the phone, then during the boot animation have this command ready and run via ADB.
adb wait-for-device shell magisk --remove-modules
3. Reboot, cycle the gestures to nav bar and see if it works.
That'll eliminate any left over modules, just incase, even if they're disabled from magisk they can still be left behind, have seen this a few times.
Click to expand...
Click to collapse
I feel so stupid
Going to bed I just realised I completely forgot the CC mod. I removed all mods except this one
Now I did the problem is solved.
Thanks for all the help and pointing to the right direction!
henk-jan said:
I feel so stupid
Going to bed I just realised I completely forgot the CC mod. I removed all mods except this one
Now I did the problem is solved.
Thanks for all the help and pointing to the right direction!
Click to expand...
Click to collapse
No worries man. Hit the thanks button.:good:
Glad you're sorted