my boost mobile lg stylo 3 suddenly stopped working and now it's stuck in qualcomm HS-USB QDloader9008 mode, it started when i was at someone's appointment and i took my phone out of my pocket to turn it on and it got stuck on the lg powered by android screen, then i took out the battery and put it back in and now it doesn't do anything, but when i plug it in to the computer via USB it goes into the mode stated above which seems to be emergency download mode, I've tried using my spare lg stylo 3 battery but that didn't work , then i tried re-flowing it in the oven because i have a sprint LG G3 that i also have to re-flow every now and then because of screen flicker, blue screen of death, and/or WiFi turning on, so i tried re-flowing only the motherboard in the oven along with the lg G3 motherboard as the lg G3 was also dead but after reflowing only the LG G3 was fixed but the lg stylo 3 is still doing the same exact thing. I would like some help to get this phone working again or to at least recover some videos from this phone and if anyone has the qfil file for this phone please post it on this forum along with instructions to eather recover lost data or get the phone working again or PM me the qfil file with instructions, i also have linked the youtube video showing the problem: https://www.youtube.com/watch?v=i3ueerK2D8k&feature=youtu.be Edit: I would also like to add that I have never attempted to root, downgrade, or preform any other advanced operation that could brick the phone
Related
hello - sorry for my bad english - i'll try ...
2 days ago screen of my g2 was dark suddenly. i turned it off and on again. after 2 seconds display becomes dark again. all other functions were fine. i called service an they told me to reflash firmware by lg-support-tool and "reset upgrade failure". i connected G2 to PC and entered download-mode and started flashing. unfortunately my wife caused a short circuit an my PC went off.
now my G2 ist dead. when i connect it to pc, win 7 finds a lot of new drives and i should format them. one of the drives is accessible and shows some data. but in all cases display of g2 stays dark. display manager shows G2 as Qalcomm HS_USB.
What can i do?
thx
Mathias
jackhotti said:
hello - sorry for my bad english - i'll try ...
2 days ago screen of my g2 was dark suddenly. i turned it off and on again. after 2 seconds display becomes dark again. all other functions were fine. i called service an they told me to reflash firmware by lg-support-tool and "reset upgrade failure". i connected G2 to PC and entered download-mode and started flashing. unfortunately my wife caused a short circuit an my PC went off.
now my G2 ist dead. when i connect it to pc, win 7 finds a lot of new drives and i should format them. one of the drives is accessible and shows some data. but in all cases display of g2 stays dark. display manager shows G2 as Qalcomm HS_USB.
What can i do?
thx
Mathias
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2582142 to fix your Brick
My lg g2 suddenly dead .. it was in my pocket and i dont know how it got switched off and now it is not getting switched on please tell me some solution i tried to keep my phone cool and tried to re charge it nothing is working
can't get to recovery mode also :crying:
idk wtf it just keeps freezing and now it won't turn on at all im done with ****ing the g2 waste of 150 dollars now i have no phone.
It turns on to the lg logo I have tryed this http://forum.xda-developers.com/showthread.php?t=2432476[1] gets to the ready part on the LG Flash tool I unplug my phone plug it back and nothing happens. just says ready so I give up I was really enjoying the LG G2 also.
Now I won't have a cell phone for a couple of months great!
I put it in download mode early and now when holding down the power button i can get the LG Logo to come up even better. edit:just got a lg logo. ok....,
edit my rom just launched but it will end up freezing and crashing again. and I will have to go thru what I just went thru fix this please.
TLRPHONE just randomly freezes boots off and does not reboot. I have to monkey with it before it does.
This started on CloudyG2 I just installed CM13 on my phone and its still happening
Phone is running currently most likely will freezea and crash again.
I copied and pasted this from my reddit post on /r/lgg2 anyways.
I installed cloudyG2 again. And my phone will work for 4 mins then it freezes and crashes and I have t o wait to boot it again. I am going to just to restore stock rom (TOT un-brick)
Edit: I just plugged my phone in the computer and it made a noise like it was plugged in but the screen is not on
Can't get the phone to show the lg logo have been trying for 2 mins now when I plug the phone in it still makes the noise.
AT&T D800
nobody can help I took it to the brick and motar store as some people call it thats where I bought the phone. they said they will check and see if they can fix it. Since I bought it less than 30 days ago.
Brick and motar called said they fixed it!!!!
Edit: still broke they said they would give me a new phone I told them I wanted another G2 or a Nexus 5 or a idol 3. told me to come back tomorrow.
I have an LG SPIRIT H440n20B, I was watching a film and then the phone just died, ever since it wont boot, sticks on the LG Screen either till it dies or I take the Battery out and all buttons are then useless. I booted into Firmware Update and flashed it with the KDZ using LGMobile Support Tool, it flashed it and finished, the phone rebooted and does the exact same thing (don't think I needed to flash it in the first place now so lost all my data for nothing) but when it is booting it sticks on the LG screen and makes tiny parts of the booting noise, like every now and then it will crackle the noise, and that is all it does, nothing else, After flashing it it does boot with the android thing for 0.5 seconds then goes to the LG Screen to do as what I said, is they anything I can do like heat the CPU up? Buy new motherboard/logic board, flash it in another way as I not the money at the moment to buy a new phone, this one is only 2 weeks old (7 days of them weeks it been dead/bricked)
I have all drivers and software needed + like 8 versions of the same KDZ file (other countries) and NONE of them do anything.
Can any of you help, that would be greatly appreciated?
Hello there!
I recently got my hands on stock Moto G4 from my cousin. The thing is, he fell with it on his pocket and now when you try to power it on it show the Motorola logo screen briefly, turns off, then turns on again and shows the logo screen again and so on. The phone charges up normally, enter fastboot mode just fine (although I can't enter recovery, only little droid with exclamation mark, but maybe it's because it's locked).
I searched throughout the xda forums and google for solutions and tried everything that looked like it could work. Nothing did. I tried the following:
1 - Change the battery;
2- Install another stock rom via fastboot and adb;
About the phone state: the display is just fine. The only things that were damaged with the fall were a part of the back that was a little kneaded, a little below of the sim slot. As I disassembled the phone I noted that the metal shield in that place of the motherboard was a little bit kneaded too.
I am afraid it might be more of a hardware issue, but if you guys could give me some light or some other ideas, it would be really appreciated.
Thanks!