hello - sorry for my bad english - i'll try ...
2 days ago screen of my g2 was dark suddenly. i turned it off and on again. after 2 seconds display becomes dark again. all other functions were fine. i called service an they told me to reflash firmware by lg-support-tool and "reset upgrade failure". i connected G2 to PC and entered download-mode and started flashing. unfortunately my wife caused a short circuit an my PC went off.
now my G2 ist dead. when i connect it to pc, win 7 finds a lot of new drives and i should format them. one of the drives is accessible and shows some data. but in all cases display of g2 stays dark. display manager shows G2 as Qalcomm HS_USB.
What can i do?
thx
Mathias
jackhotti said:
hello - sorry for my bad english - i'll try ...
2 days ago screen of my g2 was dark suddenly. i turned it off and on again. after 2 seconds display becomes dark again. all other functions were fine. i called service an they told me to reflash firmware by lg-support-tool and "reset upgrade failure". i connected G2 to PC and entered download-mode and started flashing. unfortunately my wife caused a short circuit an my PC went off.
now my G2 ist dead. when i connect it to pc, win 7 finds a lot of new drives and i should format them. one of the drives is accessible and shows some data. but in all cases display of g2 stays dark. display manager shows G2 as Qalcomm HS_USB.
What can i do?
thx
Mathias
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2582142 to fix your Brick
Related
HI ! In the firsth place sorry for my bad english.
I have had a titan for about 6-7 months and a week ago it stopped working without a reason.
It stopped responding and after a reset it only shows the starting logo, and after that the screen slowly shifts to pure white colour and I can hear a one "beep" sound.
I tried to hard reset it and everything but without any luck. It charges the battery fine when connected to a USB port (orange light),
after turning it on i get the green ligh, main branded logo and some numbers (M05 S04 B06 D 3.60 and 2 lines of other numbers but they show only for like half a second and disappear so i cant write them down)
after that nothing, the logo screen goes all white, with some "notification" sound and thats all.
When connected to PC It gets detected as "something" and I cant use any flashing software because it says that it did not detect the device,
one time It got detected as some modem device. Is there any way to bring it back to life ? or is it bricked permanently ?
Please Help
And Thank You in Advance !!
Update: I managed to make a connection between my PDA and PC
it is detected as "Microsoft windows mobile adapter #2", and my PDA_PC is detected in My Computer,
but when I try to flash it the software detects it i get the message to wait 5 min till the flash is over but
as soon as this message appears my PDA is getting disconnected and i get an connection error...
help ;(
Ah... and one more thing, I dont know if it matters but when i open my PDAs memory the windows folder appears to be deleted...
can any one zip their windows folder and give me a link to it... maybe that will help ;(
I have the same problem on my Mogul with connecting to my Computer! For some odd reason it won't sync and restarts my computer automatically!! WEIRD!? Just go check out some of the Unbricking posts or Google it- they may help you!
Hi how are you,well i bricked my device and i cant make it get alive LOL.. its been pass 4 days since i bricked it.. today at night i took it and i connected it to my pc and buala.. the phone didnt turn on but it showed me a red led ligh and the touch buttons were on,but the screen was black,and my pc recognized it like Qualcomm CDMA Technologies MSM i dont know what is that but now i know my phone is not dead.. what can i do in that case?? 5 days before my phone didnt turn on,no pink screen no nothing and now suddenly is recognized what is that?? HELP ME PLEASE......
How to unbrick.
Caryaz said:
Hi how are you,well i bricked my device and i cant make it get alive LOL.. its been pass 4 days since i bricked it.. today at night i took it and i connected it to my pc and buala.. the phone didnt turn on but it showed me a red led ligh and the touch buttons were on,but the screen was black,and my pc recognized it like Qualcomm CDMA Technologies MSM i dont know what is that but now i know my phone is not dead.. what can i do in that case?? 5 days before my phone didnt turn on,no pink screen no nothing and now suddenly is recognized what is that?? HELP ME PLEASE......
Click to expand...
Click to collapse
I can help you, I bricked my phone about a month ago and it took me 2 weeks to fix it. But I learned exactly how everything works and how to fix it. Give me some time and I will type a post and upload all the necessary files.
Partitioned
Have you ever partitioned your phone for CM10.1 or some other reason?
huawei u8800/51
Macgyver14 said:
Have you ever partitioned your phone for CM10.1 or some other reason?
Click to expand...
Click to collapse
Hi how are you,well i bricked my device and i cant make it get alive LOL.. its been pass 4 days since i bricked it.. today at night i took it and i connected it to my pc and buala.. the phone didnt turn on but it showed me a red led ligh and the touch BUTTONS were on,but the screen was black,and my pc recognized it like Qualcomm CDMA Technologies MSM i dont know what is that but now i know my phone is not dead.. what can i do in that case?? 5 days before my phone didnt turn on,no pink screen no nothing and now suddenly is recognized what is that?? HELP ME PLEASE......
Hello guys. I have unbricked the D800 using "very partition method" and it worked, I have download mode again. Stupidly enough after I fixed it I applied "very partition method" again because I was trying to get my PC to recognize the proper drivers. After that the screen went dark but the phone is working properly, I have flashed a rom successfully, although I couldn't see anything on the screen I knew I was in download mode because the correct drivers where diplayed on windows device manager. During boot I see the LG logo for half a second and when I press power button I also see the screen for half a second (asks to insert sim card) but then it goes dark again. It boots up normally, double knock working, touchscreen working, makes sounds, charging etc. I don't know if this is a hardware problem, maybe a short circuit caused some damage on the motherboard? or if it is a software problem. But apart from that the device seems to be working fine. Any help appreciated
Good morning, everyone, I'm using google translator, so I apologize for mistakes.
Well let's go, I have a LG K8 k350ds BRA, I think it's full bricked, because it does not turn on, but the battery recharges, but does not show anything on the screen, when I connect the same on the computer, it connects and disconnects right, getting It's impossible to check for errors, nothing ever appears on the screen of the phone, and the computer in the management stays as "MediaTek", LG programs do not recognize it, no program recognizes it.
Is there any way to resuscitate this child?
Thank you all. :good:
hloockers said:
Good morning, everyone, I'm using google translator, so I apologize for mistakes.
Well let's go, I have a LG K8 k350ds BRA, I think it's full bricked, because it does not turn on, but the battery recharges, but does not show anything on the screen, when I connect the same on the computer, it connects and disconnects right, getting It's impossible to check for errors, nothing ever appears on the screen of the phone, and the computer in the management stays as "MediaTek", LG programs do not recognize it, no program recognizes it.
Is there any way to resuscitate this child?
Thank you all. :good:
Click to expand...
Click to collapse
Your phone is gone, teaches you to tamper with your phone
my boost mobile lg stylo 3 suddenly stopped working and now it's stuck in qualcomm HS-USB QDloader9008 mode, it started when i was at someone's appointment and i took my phone out of my pocket to turn it on and it got stuck on the lg powered by android screen, then i took out the battery and put it back in and now it doesn't do anything, but when i plug it in to the computer via USB it goes into the mode stated above which seems to be emergency download mode, I've tried using my spare lg stylo 3 battery but that didn't work , then i tried re-flowing it in the oven because i have a sprint LG G3 that i also have to re-flow every now and then because of screen flicker, blue screen of death, and/or WiFi turning on, so i tried re-flowing only the motherboard in the oven along with the lg G3 motherboard as the lg G3 was also dead but after reflowing only the LG G3 was fixed but the lg stylo 3 is still doing the same exact thing. I would like some help to get this phone working again or to at least recover some videos from this phone and if anyone has the qfil file for this phone please post it on this forum along with instructions to eather recover lost data or get the phone working again or PM me the qfil file with instructions, i also have linked the youtube video showing the problem: https://www.youtube.com/watch?v=i3ueerK2D8k&feature=youtu.be Edit: I would also like to add that I have never attempted to root, downgrade, or preform any other advanced operation that could brick the phone