Need help with ISUDAR HU. - Android Head-Units

So isudar released mcu for download on their facebook page. After instaling my HE lost ability to light up buttons, keeps beeping every minute and red text appeared (Version Unmatch -01 4CA345C3D78CFCAC8400 GS 00000000)

Do you have working load button which can switch on/off the sound loudness function?

Related

Red error hizpo

hello everyone, I have a problem with my android radio 7.1.2, the documents put model jby-6201, everything started when the volume button stopped working only function mute, I changed the MCU and since then I get the Red letters, someone who can help me?
another thing, the steering wheel controls have never worked well they work sometimes

Issues with chinese HU

Hi Everyone!
I've recently installed a Chinese (Funrover) Android HU into my 7th gen Honda Accord. For the first few weeks everything worked fine. Then I tried to install the rearview camera that came with the HU. On the first try before putting the camera to it's final place I tested it and it worked fine. After I put it in it's actual place and tried again, it didn't work. The camera lights up, so power is fine but the HU doesn't switch to the camera's feed.
Next day I had some issues with the HU - the sound just went away. This still happens randomly.
And now recently the HU started turning off randomly, sometimes it doesn't even start up when I start the car. It does work sometimes though. Also it sometimes tries to power on en-route, but usually fails and goes blank again in a few seconds. I noticed that this usually happens when I'm braking and also at the same time the car's original built-in bluetooth unit (which I've never used so I'm not sure how it works) would flash it's leds as if it's getting power from the same source.
Does anyone have any ideas what to check / how to fix this?
Thanks in advance
(let me know if you need any more details)

Spotify switched to nav volume

Hi I have an android head unit for my car that I have managed to mess up by putting Spotify into the auto start slot (was navi) as I thought it would be good to come on at the start. The problem I now have is that is has the volume of the sat nav which goes down to 3 and then off. I've tried pressing the reset button on the front of the unit (nothing changed) and also uninstalling Spotify/Navi/maps and it's still the same ???
Is there a way to factory reset these head units?
Thanx for any help I receive ?

[Head Unit][8227][alps-mp-o1.mp5][TS907] Swc no more working

Hi, I have this chinese Android unit :
Model: 8227l
Build version: alps-mp-o1.mp5
Mcu: TS907.190518(W)
Mtc: ????????
Even if is some kind of fake, everything was working good, android auto with https://forum.xda-developers.com/android-auto/mtcb-software-development/app-running-android-auto-unit-t3537547 , swc buttons, radio, audio, open doors alert, everything. But at a certain point, swc buttons stopped working. Now they work only in the stock swc configuration app, but then if you press buttons nothing happens, no volume up or down, no play/pause, nothing.
I tried to analyze the issue but everything is locked and I cannot even access adb....
Try to search a lot the forum and internet (russian forum ) but did no make any step forward.
I am a developer and would not be scared about writing some code for this unit (Mcu / Mtc) but need some hint regarding how to proceed with this issue.
Any help would be REALLY welcome, any suggestions?
hi, did yous solve this?
Pinabello said:
Hi, I have this chinese Android unit :
Model: 8227l
Build version: alps-mp-o1.mp5
Mcu: TS907.190518(W)
Mtc: ????????
Even if is some kind of fake, everything was working good, android auto with https://forum.xda-developers.com/android-auto/mtcb-software-development/app-running-android-auto-unit-t3537547 , swc buttons, radio, audio, open doors alert, everything. But at a certain point, swc buttons stopped working. Now they work only in the stock swc configuration app, but then if you press buttons nothing happens, no volume up or down, no play/pause, nothing.
I tried to analyze the issue but everything is locked and I cannot even access adb....
Try to search a lot the forum and internet (russian forum ) but did no make any step forward.
I am a developer and would not be scared about writing some code for this unit (Mcu / Mtc) but need some hint regarding how to proceed with this issue.
Any help would be REALLY welcome, any suggestions?
Click to expand...
Click to collapse
Do u knw how to change the screen resolution of a vertical Android screen in reverse screen ?
tonyj224 said:
Do u knw how to change the screen resolution of a vertical Android screen in reverse screen ?
Click to expand...
Click to collapse
Hi.
I have the same version as you. Unfortunatly I can't help you. I just know that the swc are related to the canBus box.
But I would like to know if, by any chance, you have this HU installed in a Peugeot.
Do you have any idea what is this?
Pinabello said:
Hi, I have this chinese Android unit :
Model: 8227l
Build version: alps-mp-o1.mp5
Mcu: TS907.190518(W)
Mtc: ????????
Even if is some kind of fake, everything was working good, android auto with https://forum.xda-developers.com/android-auto/mtcb-software-development/app-running-android-auto-unit-t3537547 , swc buttons, radio, audio, open doors alert, everything. But at a certain point, swc buttons stopped working. Now they work only in the stock swc configuration app, but then if you press buttons nothing happens, no volume up or down, no play/pause, nothing.
I tried to analyze the issue but everything is locked and I cannot even access adb....
Try to search a lot the forum and internet (russian forum ) but did no make any step forward.
I am a developer and would not be scared about writing some code for this unit (Mcu / Mtc) but need some hint regarding how to proceed with this issue.
Any help would be REALLY welcome, any suggestions?
Click to expand...
Click to collapse
Hi!!! I would like to be a develloper as well! My unit is made of 2 parts: The radio and the Screen. Is installed (and perfectly fitting) a Peugeot 307 Phase 2 (I guess phase 1 are the cars with a smal display for temperature and time. Phase 2 are the cars that had a GPS originaly, and a upper screen - not a display). For me, the problem is that the software dont allow you to choose wich car type you have. I can select Peugeot 307 but not the type. My CanBus is HiWorld. It says 307, but not specific model. I would like this changes: When I press the button for OnBoard Computer, It should go to the trip menu. Also, the car Settings (like AC and door lock) are not working and they blink (selected, notSelected).
There is a miscomunication there. I cant find help!!!!

TS10 UIS7862 - Sometimes no Image or Freezes at boot Screen

Hello all,
I have a TS10 4G/32G 9Inch Model installed at a Hyundai.
The unit randomly doesnt start, and have different behaviours.
1. Screen lits, but no image, Guess the unit starts in background, since Radio comes up, and you can ear music, and Carplay also works, because if A call comes in you can accept call from the buttons at the wheel, and sound works normally. But no Image can be seen.
2. Unit Lits, Hyundai Logo appear, and unit freezes there, Waited quite long, and doesnt go further from Logo Screen.
3. Starts quite fast, probably from sleep mode and works fine
4. Starts to Hyundai boot logo, takes maybe 20 or 30 sec (Booting?), and then works fine.
Sometimes you start the car, and it starts, you stop and start again and problem happens.
If problem is occuring, if you press the reset button, sometimes it comes up, other times it take 10 resets before it starts.
Dont know if this issue has been addressed here, if it was im sorry to duplicate, I looked and couldnt find.
Hope someone can help me.
Thank you.

Categories

Resources