Hi I have an android head unit for my car that I have managed to mess up by putting Spotify into the auto start slot (was navi) as I thought it would be good to come on at the start. The problem I now have is that is has the volume of the sat nav which goes down to 3 and then off. I've tried pressing the reset button on the front of the unit (nothing changed) and also uninstalling Spotify/Navi/maps and it's still the same ???
Is there a way to factory reset these head units?
Thanx for any help I receive ?
Related
Hello ,
I bought this head unit to fit into my Audi A3, bought the fitting cage and wiring harness for the amplified rear Audio. Connected it up and it’s was all fine besides some questionable sound quality and then the next time I switched it on I was met with a blank screen. It’ll beep when I reconnect the power but that’s about it.
I was advised to load the boot menu by holding reset and power for 5 seconds then releasing reset followed by power which gave me three beeps but no boot menu! I also tried disconnecting my car battery to reset everything but it made no difference, it still won’t boot back up.
Has anyone come across this before? Is this an issue with the unit or could it not be getting the power it needs? I’m in desperate need of some help, any advice at all would be a massive help!
Thanks!
Darren
anyone ever used this unit or one similar from the manufacturer? the problem I have is if i change android settings unless i make the unit to a reboot from the notification bar if won't hold the setting when the key is turned off and back on it doesn't even resume playing music automatically.
Hi, I had an android unit for my bmw e90 When I bought the car 2nd hand. The unit has been working fine until today when I decided to go in to factory menu change the idrive screen size, I accidentally press idrive a from idrive a thinking it was the right thing to do now my idrive/car info stop working I can use the knob or button on idrive but can on android I also try changing back to idrive b and reset the system it still not working now I regret doing everything and lost id6 theme there is no where to be seen can anyone help me ?
Same exact issue
Try these files. BMW Update
Have somebody fixed the issue. I have android 11 everything was working and my knob and menu button stops
I have an Xtrons PX5 that was already installed in my vehicle when I bought it. Something strange is happening with the volume...
The volume slider in Android keeps resetting to 12 every time the unit is powered off and back on. I like to keep this higher (around 20 to 30) as it gives a higher level to my OEM head unit aux input.
It's kinda annoying that I have to increase the volume slider every time the vehicle is switched on. Any ideas on why this is happening?
Have also tried setting the volume in Settings -> volume but still it resets back to 12 every time.
I have the same issue, it's really annoying!
What does reseller suggest when contacted for support
garrywilliams said:
I have an Xtrons PX5 that was already installed in my vehicle when I bought it. Something strange is happening with the volume...
The volume slider in Android keeps resetting to 12 every time the unit is powered off and back on. I like to keep this higher (around 20 to 30) as it gives a higher level to my OEM head unit aux input.
It's kinda annoying that I have to increase the volume slider every time the vehicle is switched on. Any ideas on why this is happening?
Have also tried setting the volume in Settings -> volume but still it resets back to 12 every time.
Click to expand...
Click to collapse
Garry after having a good poke about I have fixed it. You need to set your default boot volume to 30, this is done by accessing the factory settings menu within the unit, then the setting is under the "Other" tab at the top right. you can also change the boot logo there also. see attached. PM me if you get stuck, I used the passcode of 126 to access this menu.
Hello,
The other night I was messing with my HU sold\made by XY Auto and the model is the 8227L_Demo. I must have cleared something in the factory settings because now my on screen climate controls are not showing. I would try to perform a recovery on the unit but it seems there is not any way to get into the recovery. My physical climate controls on the chassis still work. Picture attached of the entire unit I purchased back in 2018. All in all I think I messed something up with the CAN BUS in the software? All the wiring is still connected properly and no damage.
Anyone have any experience with this and maybe know how I can fix it? Anyone know how to get the unit into recovery mode? For recovery mode I've already tried disconnecting the power from the HU, holding in the Reset button while plugging the power back into the HU (I did have the ACC turned on while doing this) still no recovery mode. I also checked for a chip? C7 or something like that on the MB but I could not find it do to a short out as some others have stated it works on their HU's/
When I go into the Car Settings Menu, I logged into Factory Settings and I Properly set the CAN Set to Honda. I then went back out of the Factory Settings and then went into Car Settings where it says to "set in car". I pressed that button and then I get a message of "No Original vehicle settings function"
Any help, guidance, etc. is greatly appreciated and thanks in advance.
(I emailed XY Auto 2 days ago and no response from them yet)
From reading the posts, what has been considered and tried.
What do you want out of xda
Are you sure you have selected the correct CanBus type (e.g Bagu, AnyYuan, etc)? I doubt you will get a response from XY Auto as these 8227L units are for the most part unbranded generic head units. Have you tried contacting who you bought the head unit from (the reseller)?